How to Paint 3D Prints - Resin Models and Miniatures - Before you start Resin Printing (Part 3)

Подписаться 64 тыс.

Просмотров 24 тыс.

50% 1

This video is Sponsored by MyMiniFactory, please support me by checking out the latest campaign from One Page Rules. mmf.io/oprsecretsoftixalxhp
WIN A GKTWO BUNDLE - See below
Equipment Used in This Video
BUY the Uniformation GKTWO Here (Discount Code “FAUXHAMMER): geni.us/Unfomation
Wargamer Resin: yesthats3dprinted.com/?ref=Fa...
Superglue Activator: elementgames.co.uk/paints-hob...
Rosemary & Co Brushes: www.rosemaryandco.com/pure-ko...
Artis Opus Brushes: store.artis-opus.com/?ref=aCq...
Beginner Airbrush Kit: www.fauxhammer.com/featured/b...
My Referenced Videos
Full Beginner Playlist: • Resin Printing Beginne...
How Resin Printers Work: • How does a Resin Print...
How to Clean your Prints: • How to Clean Resin Pri...
How to Paint Miniatures: • How to Paint 3D Prints...
How to Configure any printer - • How to Print Perfect M...
How to Support Miniatures - • How to Support Miniatu...
How to 3D Print in Cold Environments - • How to 3D Print Resin ...
Suggested Creators
The Painting Phase (a fun Hobby Chatshow): / @thepaintingphase
Artis Opus: / @artisopus
Cult of Paint: / @cultofpaint
Marco Frisoni: / @marcofrisoninjm
Duncan Rhodes: / @duncanrhodesdrpa
Pete The Wargamer: / @petethewargamer
The Painting Coach: / @thepaintingcoach
Brushtroke Painting Guides: / @brushstrokepaintinggu...
WIN A GKTWO BUNDLE
Once again, we have another GKTWO Printer Bundle to give away...
To enter, It's really simple, There are the same simple steps as always to enter - with a twist.
1. Be subscribed
2. Watch the video - to the end (or just leave it playing and mut it, i won't know. but i will know through "watch time" stats if it is being watched to the end)
3. Like the Video
4. Comment on the video
5. Share the video ( will check. if you win and then can't show a link to a public source where this was shared, I will rescind the win and do another draw. sorry, This is all about driving Uniformities promotion)
This is part 3 of a 2 part video. So you'll need to go back do the same on the last two videos too! (Will be obviously called Part 1) • How does a Resin Print... and Part 2 • How to Clean Resin Pri...
When these videos reach 100,000 views combined, I'll pull one commenters name from a hat, and they'll win a GKTWO, with wash and cure stations.
If you do this on all 3 videos, that's 3 entries
And don't worry, the first time I did this it took months, now my videos typically get about 50,000 views after just two weeks anyway, but if you want to speed this up! watch it again! and again (you don't even need the sound on, just keep it playing)
The winner will be announced by me on a livestream and will be contacted by me via my account on here. Your details will be sent to Uniformation who will arrange your Printer, Wash and Cure system to be sent to you!
Competition is open to anyone that Uniformation ships to, check eligibility here geni.us/Unfomation
Join this channel to get access to perks:
/ @fauxhammer

Развлечения

Опубликовано:

4 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 188

@FauxHammer 4 месяца назад

This video is Sponsored by MyMiniFactory, please support me by checking out the latest campaign from One Page Rules. mmf.io/oprsecretsoftixalxhp *Equipment Used in This Video* BUY the *Uniformation GKTWO* Here (Discount Code “FAUXHAMMER): geni.us/Unfomation Wargamer Resin: yesthats3dprinted.com/?ref=FauxHammer Superglue Activator: elementgames.co.uk/paints-hobby-and-scenery/getting-started-hobby/start-tools/element-essentials-superglue-activator?d=10279 Rosemary & Co Brushes: www.rosemaryandco.com/pure-kolinsky-pointed?u=FAUXHAMMER Artis Opus Brushes: store.artis-opus.com/?ref=aCq6u7Kh Beginner Airbrush Kit: www.fauxhammer.com/featured/best-beginner-airbrush-for-miniatures/ *My Referenced Videos* Full Beginner Playlist: ru-vid.com/group/PLngF4BVc8PpGi9_y_kIIl7xIbFPMRMr2H How Resin Printers Work: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iKa2dfo92GI.htmlsi=hfRMmOScZyMzLZSN How to Clean your Prints: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oCgDm1KfboY.htmlsi=lCL8PnVxg7Lvm9SD How to Paint Miniatures: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hr5d4946Z-M.htmlsi=ZThkpw_TVrCRl0nB How to Configure any printer - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Gm0-z971tgY.htmlsi=3pjH_5r33NDIzi0t How to Support Miniatures - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9G3Oq3_LtEQ.htmlsi=Uqjke5zbvwHGM2Sz How to 3D Print in Cold Environments - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KZLrgKYesk8.html *Suggested Creators* The Painting Phase (a fun Hobby Chatshow): www.youtube.com/@thepaintingphase Artis Opus: www.youtube.com/@ArtisOpus Cult of Paint: www.youtube.com/@cultofpaint Marco Frisoni: www.youtube.com/@MarcoFrisoniNJM Duncan Rhodes: www.youtube.com/@DuncanRhodesDRPA Pete The Wargamer: www.youtube.com/@PeteTheWargamer The Painting Coach: www.youtube.com/@ThePaintingCoach Brushtroke Painting Guides: www.youtube.com/@BrushstrokePaintingGuides Join this channel to get access to perks: ru-vid.com/show-UC_9Jsf3SP8aMJgn0xv5jHjAjoin

@akumaking1 Месяц назад

What about Elegoo water washable resin?

@danielsw.9409 4 месяца назад

Answer to your question: Yes, please more content on different painting techniques or tools. I really like that you ALWAYS! consider an audience which is lacking basic knowledge/ best practices about specific workflows, when creating your videos. This is really helpful for beginners, but I think that even some advanced painters out there might be able to profit from the repitition of basics.

@therealraysiel 4 месяца назад

samesies. always something to learn. what was that rust effect stuff you mentioned? it looks awesome!

@johgis 3 месяца назад

Agree with this as well!

@monkeydad47 4 месяца назад

I would love more hobby centric videos! In general I just really enjoy watching people paint models regardless if it's a tutorial video or not. It's just satisfying to watch, ya' know?

@TheEightshot 3 месяца назад

I am 100% for seeing more miniature painting stuff. I think casting your net wide would give your channel more appeal and resiliance to quiet 3D printing times.

@BrenGunR 4 месяца назад

Hello! Please do more hobby centered videos. I always find them very helpful. Even if I've seen dozens of videos, I still pick up a new tip or trick.

@S.A.S.H. Месяц назад

By all means I'd love to watch more varied videos! Your approach to reviewing 3D printers would, I think, lend itself to other tools of the hobby quite well, so go for it. Please.

@HamsterChew 4 месяца назад

Love to see everybody's different approach to the hobby. Thanks for your time and effort.

@christiangruening352 4 месяца назад

For the priming phase I highly recommend either the AK Primer and Microfiller from the Xtreme Metal Range or the spray can AK microfiller. It really bonds to the mini and fills any layer lines that might be visible very well. The approach is the same as with any primer 2 to 3 very thin coats then one final slightly thicker coat

@KevinJernigan 4 месяца назад

Nice to see OPR getting some more love, been subscribed to them for awhile now. I wish more people knew about the GW alternatives.

@DylanMarx-lb8zl 4 месяца назад

Beginner here and I'm learning quite a bit. One thing that I've been a little wary about is painting the models I want to print. It's kind of scary! Thanks for the video. Very informative.

@xX_Zieva_Xx Месяц назад

I would love more videos on painting techniques and different tools. I love painting and I do have an airbrush but getting the paint to go where I want it too has been a struggle. Thanks for another great video :)

@SpudzLuv 4 месяца назад

Yes to more miniature painting videos please, just starting out and concentrating on keeping between the lines is my current goal, would be great to maybe go into depth on watering down paints, mixing etc. Do you have a video on prepping large models, gluing, filling in crevasses, what you use etc?

@colinrice9302 4 месяца назад

Yes, do more varied equipment! I’ll check out your recommendations, tutorials and brushes.

@michaelpurvis2387 3 месяца назад

A very informative video! I had never seen the "slapchop" method of painting before. It's given me an idea for painting a "ghost" effect on a larger injection molded styrene figure kit that I've been working on for years.

@nm72510 4 месяца назад

I would love to hear about more tools for the hobby. I think the painting tutorial videos are oversaturated on RU-vid, but things like carrying cases, brushes, paints, display cases, etc. isn't something well covered. As a crafting DM, I have plenty of channels on making things, but a channel covering these tools and accessories would be great (aside from being my go-to channel for all things resin printers)!

@Tarok-2316 4 месяца назад

Thanks for bringing up OPR, and for the video

@Iskelderon 4 месяца назад

Thank you! I'm more of a scale model and diorama builder and only dabble in figures, but most of that still translates quite well.

@Guzwar 3 месяца назад

I'd love to see in-depth air brush (and compressor?) reviews in the style of your printer reviews. Not just "Button good, flow smooth", but the little things that other reviewers can't/don't pick out for whatever reason.

@louiss443 4 месяца назад

that brings me back to my scale model days. Now I can print that stuff and paint it lol. Eventhough I mostly do engineering parts.

@supertopdom 3 месяца назад

Fauxhammer is one of the reason i started to really get into 3d printing. all the printer reviews really helped me out. Its too bad i didnt learn about it before i bought my first printer else i would have bought a gktwo to start.

@Strixx23 3 месяца назад

Yes please, on branching out into other hobby tools and techniques.

@simonhigginbotham5663 3 месяца назад

Thumbs up for branching out to other hobby subjects.

@venmita 3 месяца назад

Even though miniatures are not my cup of tea, the techniques you display here are very valuable even for the type of products I would love to make with a resin printer! Really nice to see your skills and technique here :]

@TrueArdanis 4 месяца назад

I would love some videos on paint and painting! Even suggestion on how to paint terrain quickly and efficiently.

@orwinden 4 месяца назад

Definitely would like to see reviews/guides on other tools and products since miniature painting actually got me interested in 3d printing :)

@tv9mpeti 4 месяца назад

I've started following your channel for the 3D printing stuff, but that being said, I'd love to hear more about painting and all the other aspects of the hobby.

@PulsefiredGaming 4 месяца назад

This denser content is huge improvement on your previous videos. Painting videos are good content to have going

@frozenhowl 4 месяца назад

thanks for making an intro series :) very handy to show to people

@nicholassmith5206 4 месяца назад

Yes mate. Do some more painting stuff. Don't get me wrong you have helped no end with my printer purchase and I always direct others to your channel for printing reviews but as someone who has watched all your stuff I would love to see more of the painting side of things.

@nickbuckner7302 4 месяца назад

Just looking into resin printing and miniatures. Your videos have been informative and encouraging for new comers!

@hamthomas4715 4 месяца назад

Absolutely add more content around hobby tools other than printers!

@GDSMiniatures 4 месяца назад

No Fauxhammer, you're the hot tool right now... ...is this how you compliment?

@FauxHammer 4 месяца назад

I’ll take it as one

@threegees 4 месяца назад

Great vid. Love the painting, love the shoutouts to other great hobby RU-vidrs and yes please to more hobby videos to compliment the printer vids. Keep up the awesome work!

@Pyro-89 4 месяца назад

I liked seeing the painting, I think you should include some painting videos more regularly on models that you have printed.

@Valllentine 4 месяца назад

I've definitely gotten more interested in painting miniatures and statues and what not so this is cool to see

@predator837 4 месяца назад

great video like before! I recently found out you can make your own texture paint with sand and watered down pva glue, mix in some paint and it's ready to go for anything you might need, and you can keep it mixed in an airtight container with no problem.

@Wayatoon 4 месяца назад

More videos are always welcome.

@MrLightmass 4 месяца назад

Yes. Please do more videos on painting 3D printing and other hobby topics in general. Big fan of your no-nonsense opinions that get straight to the point. 100% agree with the speed painting/army painting comment. I have realized that my hobby IS 3D printing, so anything that gets my models painted faster is golden. Probably why I like guy so much.

@user-of9jo5lw6d 4 месяца назад

This is really helpful. I am about to start painting my first miniatures from the Stormlight Archive kickstarter.

@johnrandecker8063 4 месяца назад

I love to see different peoples' approaches to patinting models. I take the parts that work for me and apply them to my one process 🙂 I pretty much always pick up a tip or two from everyone and I've been panting minis for longer than Citadel has been making paint!

@pablofiasco2 4 месяца назад

ive Finally been messing around with Speedpaints myself, picked up the "Battletech starter" paint set from The Army Painter, its got 5 of thier speedspaints in it (although they give them battletech related names, they are duplicates of other speedpaints they sell), very very slowly learning how to use them and contrast and all that jazz

@kieronlong7032 4 месяца назад

Yes, I thank a lot of people. I would like to see more on the painting side. I would also like to see resin reviews as well. Different brands versions of clears or tough resins, best for its worth and what to avoid cause I know that's a big problem beginners don't know where to srart

@PaulMD 4 месяца назад

Loved this one and would love to see more painting tips/workshop tour type of thing.

@Legionx17 Месяц назад

Thanks for another excellent vid! I find keeping it simple always best, so keep the back to basic vids coming!!

@RedGentlemanPrivate 4 месяца назад

As the other videos great information and plainly explained. Never thought about how my primer coat changes the outcome of my top coats, really helpful information. Keep up the good stuff and would love to see more painting tips

@MiaTsukiyoko 4 месяца назад

Personnaly, I tried some portable airbrush, with a can sized air compressor under it (there is also models with it linking to a more classical tube) for around 40€, and it also work relatively well. Mostly use it on large model with speedpaint on top of my slapshop base to speed the process of getting them on the table, and it work well

@gilbertpatrucco5196 4 месяца назад

Been loving these series you've been doing! I appreciate how the time you put into all your videos and how thorough you are. Always very informative and entertaining, but most important, with safety always in mind. I appreciate that very much. Thanks for what you're doing for the community and keep up the great work!!! Thanks mate!

@patrickassmus3132 4 месяца назад

Dry brushing for the win. Love how it pulls the details out. I like the “back to basics” videos.

@PhilippeCouture-vz3tf 4 месяца назад

i would love to see more details on YOUR techniques on how to paint and on wich tools to use for each techniques. as for now a followed all of your tips and i can't be more happy. i even become friend with some of the uniformation staff because they wanted to know how i was able to print on 0.75 sec. exposure. i just said that i followed all of your tips and tricks and that you pointed me in the direction i needed to learn and become better at each print :) so i wanna do the same thing with my painting skills. and now, it's done, done and done 🤣😂

@-Wolfheart 3 месяца назад

I’m just getting into 3d printing. I just got a Saturn 3 the other day. I think painting will be the toughest and most tedious of the processes doing this.

@BarniMolnar 4 месяца назад

Thank you for making an extra part to the series! I'd like to start painting my minis eventually so I'd be interested to see more of your videos on the topic! But first I want to get better at actually printing the minis lol

@MagosMirka 4 месяца назад

Hobby videos are great next to the reviews! Maybe a video on the best 3D printed hobby tools/helpers? 👀

@josephhalfacre1584 2 месяца назад

Nice culmination to a beginners guide.

@Brettoh 4 месяца назад

Chaos Black, then paint. Never fails.

@Pacerfan 4 месяца назад

Really enjoy watching others hobbying techniques. Please continue with this kind of content.

@chrismyers788 Месяц назад

I am getting into the hobbies of 3D printing and painting and I have found your reviews and videos to be top notch! I will happy watch anything you're doing! Well done!

@Mikeellis1244 3 месяца назад

Personally I'm a painter not a gamer, and the building, and painting is all the fun for me!

@Deefourteen 3 месяца назад

Looking forward to part 4 and 5 of 2. 3D modeling and 3D scanning. There is always more that can be covered. Thank you for the helpful info. Keep them coming.

@OmniCookie 4 месяца назад

I’ve always wanted to get into mini painting. And find these videos about the basics very informative.

@karljackson9523 4 месяца назад

Good advice and useful techniques. Always wanted to airbrush but lacked confidence, dry brushing seems a great place to start though. 👍

@chrishurley3439 4 месяца назад

100% yes, please bring anything hobby related, your content is brilliantly done and love watching. So thank you and keep it coming.

@ZealousDragon 4 месяца назад

The Videos That Keep On Giving! Thank You For Such Detail And Guidance.

@charmande80 4 месяца назад

Liking the shorter video format, still lots of good information. I need to start painting my stuff at some point.

@austin11germer 4 месяца назад

Great video! I'd love more info on airbrushes, brushes in general that you'd recommend and other tools that make painting miniatures easier and more successful.

@winjones4255 4 месяца назад

This is an entirely new world for me and the video is incredibly helpful as to how I can get started if I win the printer

@brianlearntech 3 месяца назад

Yes more paint videos please

@JameTek 4 месяца назад

I appreciate these videos. I'm waiting for my first resin printer to show up next month (ugh, the wait!) and I'm famously clumsy and incompetent at anything artistic. But I'd sure love to make decent looking models now that I'll have the capability to print them...

@Luclin 4 месяца назад

Thanks for the great overview, it flowed really well.

@mhateys 4 месяца назад

on my ender fdm i've never had good prints for miniatures, but since a have my bambu p1 series, goddamn im back into miniatures.. its amazing what the latest fdm printers can do

@jon007agent Месяц назад

Great video as always. genuine great advice for anyone how starts painting

@stacytuttle9332 4 месяца назад

Your channel is great. All your topics are relevant and useful. Your detailed, specific, and orderly - so make the vids how you see fit and don't worry if someone thinks your taking too long to "get to the point". This hobby is all about the bloody details to begin with so if someone thinks you need to "just get on with it" I suspect they also only ever want to know "what's your exposure time?" and little else (and wonder why they keep getting crappy prints). Nope. Just keep doing it the way you want. You're consistently spot on mate.

@chrisradford5630 4 месяца назад

More detailed model painting and techniques would be great ... recently just got into 3D printing but only fdm but seriously looking at a resin printer after seeing the detailed models they produce. so going to hit up your review videos before I take the plunge and make my mind ....keep up the great work !.

@Orothrim 4 месяца назад

Absolutely I'd enjoy videos about other parts of the hobby. My main reason for interest in resin printers is the printing and painting a much larger variety of minis.

@nannerstout3877 4 месяца назад

The other topics would be interesting as well. I'm trying to find my right process for painting, but my first step was just getting paint on a brush and putting it to a model rather than overthinking it. That's been my biggest barrier lol

@henrywood8380 4 месяца назад

I definitely have learned some useful information from your videos and reviews. Thank you!

@jod3000 4 месяца назад

video 3 of a 2 part series, HA! nice one Ross

@tcunero 4 месяца назад

so nice to have printing and painting all in one. Thanks!

@malichi2395 4 месяца назад

Great learning about paint. Thanks again!

@Elijah.Lionel.Newmacht 3 месяца назад

I say yes to the question sounds great would be cool to find out what products are available out there. Also great channel recommendations for painting Duncan is the man !! And I also agree about your approach to painting being therapeutic. Im currently creating a major 40K narrative requiring a ton ov conversions and top quality painting so honestly the whole process is so rewarding creating characters you’ve been working on for years finally brought to life. I use to study 3d animation and wanna get back into it to creating and sculpt figures myself and maybe animate some stuff to anyway to translate my ideas would be sweet. Again thanks for great video mate always appreciated here best of luck to the winner 😁🫡

@Lotorens 4 месяца назад

nice tips, love painting my prints and realy make them pop.

@matthewdavenport4030 4 месяца назад

If you're priming with airbrush primer, I recommend a drop of matt varnish in your primer. Airbrush primers lack the binding agent of rattle cans, and on resin in particular, I've found that the paint will chip off easily. Alterantively, you can also just throw a quick coat of varnish on after the original priming layer.

@jaym2381 Месяц назад

Definitely interested in more painting technique videos. I wasn't aware of the term "slap-chop" for a technique I was using on 15mm miniatures about 30 years ago. I also wonder if you could do a comparison video between the GKTwo and the Elegoo Saturn 4 Ultra?

@soup-r-stitious 4 месяца назад

Nice, i just printed some minis and this really helps.

@windforward9810 4 месяца назад

The answer yes I would expand what you present. The key sometimes is do what you enjoy add that to your content otherwise you will get stale and later burn out.

@bmx_or_die 3 месяца назад

Yes more of these!!!!

@Tetsant 4 месяца назад

I would absolutely appreaciate content related to paint techniches and tools, I am on the boat of making it easier to enjoy more of the miniature when you don't want to make an art piece out of everything.

@brianmaxwell912 4 месяца назад

I like this video a lot, I also love to print my models and then paint. I’d love to see some more paintings and possibly some tutorials for painting. I have my first resin printer ordered which is the Phrozen sonic mighty Revo. Can’t wait to try resin. My Bambu lab printers are amazing but can’t capture that insane level of detail. Also I need a review for that Revo! lol awesome content keep it up!

@luigiguardascione8730 4 месяца назад

nice to see a start here video on painting not talking about slapchop. Actually good infos here

@theinsane88 4 месяца назад

Amazing as always!

@Gregatron13 4 месяца назад

I would love to see more about other tools you use, and especially hear about things you've tried that didn't work so well.

@Getresdesign 4 месяца назад

❤ thanks for all the tips and insights

@Johan-is4nz 2 месяца назад

Great video as always ! Thanks for the great content

@archfrank 4 месяца назад

Yes, more content on hobby tools Whatever you put on your site could be on your youtube

@Chimer24-qs5wo 2 месяца назад

Yes, I'd like you to do more videos on painting, other hobby tools etc, as you have a great way of cutting out the BS and getting to the point )O(

@SparktheFox 4 месяца назад

Nice introduction to painting models. I am just starting out painting my 3d prints, and I like to see, what kind of techniques are out there. :D

@Curcal 4 месяца назад

great paint job!

@tormox1 4 месяца назад

Never fails 👍. Top stuff, thanks.

@kurtkuschinski1425 2 месяца назад

I like the "back to basics" approach.

@rorycampion5890 4 месяца назад

Although I mainly print busts and sculptures these techniques are still really useful, joined the channel as you're content has been pretty helpful on helping me decide on a resin printer (would love the GKTwo but not sure my budget will stretch just yet)