We are going over the steps to paint brake calipers on a 2021 Mustang GT. This includes removing the brake calipers, painting, and installation. If you are painting rear brake calipers on a new Mustang with a heavy gloss coating (Galvanized Zinc Coating), ensure they are wire brushed/sanded greatly before painting. If not, the paint will have a hard time sticking to the factory protective coating.
Note: Wait 24-48 hours before driving your vehicle.
6 Month Update: Calipers still look awesome (just a little dirty). See link below for pictures.
drive.google.com/file/d/1W_N9...
1. After Shot - 0:05
2. Step 1 (Loosen Lug Nuts) - 0:10
3. Step 2 (Lift Vehicle) - 0:22
4. Step 3 (Remove Lug Nuts & Wheels) - 0:56
5. Step 4 (Support Front Caliper) - 1:12
6. Step 5 (Remove Brake Caliper Bolts) - 1:50
7. Step 6 (Remove Brake Rotor) - 2:33
8. Step 7 (Clean Caliper) - 2:39
9. Step 8 (Rinse off Caliper) - 3:09
10. Step 9 (Support Rear Caliper) - 3:42
11. Step 10 (Remove Brake Caliper Bolts) - 3:52
12. Step 11 (Remove Brake Caliper) - 4:08
13. Step 12 (Remove Brake Pads) - 4:18
14. Step 13 (Remove Anchor Plate Bolts) - 4:30
15. Step 14 (Remove Anchor Plate) - 4:46
16. Step 15 (Remove Spring Clips) - 4:52
17. Step 16 (Clean Caliper) - 5:02
18. Step 17 (Rinse Off Caliper) - 5:11
19. Step 18 (Clean Anchor Plates) - 5:24
20. Step 19 (Rinse Off Anchor Plates) - 5:37
21. Step 20 (Prep Paint Area) - 5:43
22. Step 21 (Apply Grease Remover) - 8:18
23. Step 22 (Setup Drop Cloths) - 8:50
24. Step 23 (Apply Paint) - 09:32
25. Step 24 (Remove Painter's Tape) - 11:21
26. Step 25 (Clean Brake Rotors) - 11:44
27. Step 26 (Install Brake Rotor) - 11:54
28. Step 27 (Disconnect Caliper Support) - 12:02
29. Step 28 (Install Brake Caliper & Bolts) - 12:07
30. Step 29 (Torque Brake Caliper Bolts) - 12:27
31. Step 30 (Clean Spring Clips) - 12:38
32. Step 31 (Install Spring Clips) - 12:52
33. Step 32 (Install Anchor Plate & Bolts) - 13:14
34. Step 33 (Torque Anchor Plate Bolts) - 13:37
35. Step 34 (Rotate Brake Caliper Piston) - 13:40
36. Step 35 (Grease & Install Brake Pads) - 13:51
37. Step 36 (Disconnect Caliper Support) - 14:41
38. Step 37 (Install Brake Caliper Bolts) - 14:43
39. Step 38 (Torque Brake Caliper Bolts) - 14:55
40. Step 39 (Install Pad Spring) - 14:59
41. Step 40 (Install Wheels & Lug Nuts) - 15:16
42. Step 41 (Lower Vehicle) - 15:33
43. Step 42 (Torque Lug Nuts) - 15:39
44. Show it off! - 15:57
Paint Supplier:
erapaints.com/
Products Used:
This video contains affiliate links for which I may receive compensation.
Orange Caliper Paint Kit - erapaints.com/product/orange-...
Respirator - amzn.to/3MyBB0H
Black Nitrile Gloves - amzn.to/3lps6Vo
Disposable Drop Cloth - amzn.to/3wqJ1xk
Wire Brushes Set - amzn.to/3Q9LVhE
Painter's Tape - amzn.to/3MvGM1b
Paracord - amzn.to/3xbq7cY
Semi-Permanent Threadlock - www.harborfreight.com/02-oz-r...
Torque Wrench - www.harborfreight.com/hand-to...
Tools:
Respirator
Safety Glasses
3/8" Socket Wrench
1/2" Socket Wrench
1/2" Breaker Bar
14mm Socket
15mm Socket
18mm Socket
21mm Socket
15mm Wrench
Torque Wrenches (24-150 ft-lb)
Semi-Permanent Threadlock
Nitrile Gloves
Wire Brushes
Painter's Tape
Disposable Drop Cloth
Razor Blade
Paracord
Shop Towels
Soap and Water Solution
Water
2k Orange Caliper Paint Kit
#ERAPaints #BrakeCalipers
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on RU-vid is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on RU-vid. Use this information at your own risk.
25 июл 2024
