How to Paint Exteriors | Mitre 10 Easy As DIY 

Glad we could help 🙌 Good luck, and feel free to get in touch with us if you need any other assistance at all! ^Billie

You're welcome Soren, glad the video was of use to you. What home maintenance project are you working on next? ^Kane

3lt 4w

Some great info thanks! The cinder block roller you mentioned there, Are you saying use a really shaggy cinder block roller in an up and down motion on the weather boards and then brush it out? Love any time saving ideas Cheers!

🤣🤣🤣

@@angelachambers8067 Angela. Look into my eyes. 🙀

💀🔫

Hey Louise, thanks for getting in touch. I'd recommend you pop in and have a chat to the team at your local www.mitre10.co.nz/store-locator - they’ll be able to help with you with your specific project ☺️ ^Evo

Samoa

Samoa songs

Replace them or just take them off I reckon

sand them back and rust kill them before painting, unless they are really bad in which case replace them.

Water blast with high pressure and all lose paint on metal will come off

What's important for bare wood is proper surface prep. Application method is equal. If it's small I use a spray can of primer. If it's larger than a few square feet I use whatever roller setup works best or failing that you have on hand. If you are comfortable with spraying and it's a room or larger love an exterior then spray. Spraying is actually pretty easy and there are many guides. For damages flaking areas you need to scrap off anything that will come off as it will eventually. If the wood is rotting it needs to have a wood hardener applied and if it's past that point be replaced. Then it needs to be primed in an primer rated for the project. All this is to create a solid stable surface that your paint will stick to. Again it's the size of the area that determines your application method. One tip for medium up to 5x5 areas is a wide application double can of spray primer. Also remember good primer is often still oilbased so be careful and keep mineral spirits on hand for cleanup Skipping prep = 3x the work in the end

@@ericterry4335 thankss for the info. tackling this project on monday--will keep your tips in mind.

tok P

That’s exactly what I did.

@@helenhall642 Some times the color change makes more show up. Still as a pro I hit everything obvious. Prime hit anything else that shows up. I don't appreciate re primingthe new fills more than I have to.

@tokutoshi.. Yeah I wondered that too. Still the video is a good help on what to get and how to paint.

Hey there - where is the recoating happening e.g wall, deck, interior, exterior? Also, how long has the stain been down ? Has the timber dried out? ^Matt

Yep a sand should do the trick, but maybe best to take a photo and check in with the team at your local store ^Charlie

dsr20631 asbestos needs to be handled by a licensed professional and is costly. Don't do it yourself, asbestosis is no joke.

как построить перголу

dsr20631 mjfbcbbhcnnc

Gena Lisitsyn àl ÀßĎàďfģh1q2349

Just paint over it, don't sand it.

you can fill it in.