How to Play all JBL Partyboxes together 

RIP Mary

Yeah if you did not realize one of those speakers is enough

This means you can use a partybox 310 and pair it with the partybox 300 with just an aux, right?

Wahahaha yesss..... Saved me 11 minutes of my life I'll never get back.

@@redraptor2023 how?

Hahaha thx

@@redraptor2023 can u explain how i tried it already but it somehow did not work

Glad you liked it!

yes it’s stereo

Nice 👌 i like to buy 2 to use in stereo mode which one do you recommend. and the battery life in which one is better? I have one 100 but the battery only last 4 hours

@@luiscarlosgonzalez6538 did you do it? I use them for double power and its amazing. Never tried sterio

your math is challenging to me

@@mygiguser Basically use two cables instead of one for the two speakers

two partyboxes on the go? you might as well get one partybox 100 for half the price

is a single 300 sounds ok to play through aux? my friends have one and i wonder if the latency is playable so i can bring my controller to a party

It should be kind of. They both react to bass

Kurt Beyer Hansen it is stereo within each speaker, but not full mono far as i recall.

It will play with mono sound. Just use the wireless connect feature if you have 2 pb100s. Wireless connection will give you stereo left and right sound

yes, i common wireless connection between all of them.

yes it is a shame

Better in what regards? I think the 100 sounds better, but the 300 has more power. What do you want to be better, sound or more power?

@@mygiguser Great & informative answer. I need people dancing outdoors, so I’d go for power. Homepods at home for decent quality.

yes

I have the 100 and I’m planning on getting another so how can I connect both

1_Make shore you only have one Bluetooth device paired 2_on both deviced Hold down the Bluetooth button or sink button looks like a side ways 8 5 seconds or 10 3_ then you will hear a paired tone I have the partybox 100 2 over them the bass is unreal

no

@@mygiguser THX

only with a PB100

that may work

It works but it's mainly used to connect like two pairs of headphones, cause when you connect two speakers at the same time the sound does not come equal in both speakers one is always a bit behind the other one.

There's audio lag with Android phones. It sounds a lot like an echo between two different speakers, even when the two speakers are exactly the same.

ja klar geht das

3 Partyboxes 310 can play together in Party mode without an auxiliary cable because they are all the same model.

@@mygiguser I tried it in the party mode of the JBL app and it didn't work, can you explain better, I would appreciate it

I think so? Using the line in and line out with the red white cables

RCA cable does work but you need the cable needs to be "RCA to 3.5 aux male jack "of course for most partyboxes inputs and outputs.

Did u try panning? With like virtual dj or garageband or bandlab? Bandlab is good for this. Just pan to the left, see what happens

I have 2 x 310. I can pair them with TWS and select mono\stereo, left or right using Jbl Partybox app.

Only with wires. For True Wireless Stereo (TWS)… You can only pair JBL PartyBox 310 with the same model. In order to achieve TWS mode, the speaker must be the same model with the exception of the PartyBox 200 and PartyBox 300 which can be paired together via TWS.

What about the go and 110?

The 100 doesn't have RCA

@@mygiguser the other way？

then it doesnt work, i dont have pb310 to try that

I dont now if its to late but i think its is the same as out out only works on partybox

Pb310 is doesnt have aux out ? What is daisychain on my partybox 310

From what I understand is no. I wanted to know this as well but I’m thinking putting my party box and a 110 together to see. I’ll respond if I can get it to work.

I have the jbl mics and 2 310s it only work on whichever speaker has the receiver wonde rifle it work with 2 mic receivers

300, but heavy, boombox is easier to carry

I have a pb 100 and it gets pretty loud. Unless you have more than 50 ppl it will be fine

I’m also a PT and have the 300 …but I have it horizontal, under my steelpan (steel drum) which are both on a garden trolley that I drag around the park 😄💯🔥 I wouldn’t dream of getting anything smaller. I’d say PB100 for a 25m swimming pool, but PB300 for a football pitch. Maximum volume = 4-5 hours (bass heavy music: reggae, dancehall, afrobeats, UK Drill/rap/grime, etc). 6+ hours if you turn it down a little sometimes or play some slow jams.

TWS only works between the same type, but AUX cable work between anything

Thanks bro i appreciate your answer even 3years after your video !@@mygiguser

That depends on the cables you use

Daisy Chain wireless is TWS. Daisy Chain with wires is 3.5mm. You can only pair JBL PartyBox 310 with the same model. In order to achieve TWS mode, the speaker must be the same model with the exception of the PartyBox 200 and PartyBox 300 which can be paired together via TWS (True Wireless Stereo).

yes

@@mygiguser thanks thats awesome!

@@mygiguser it didnt work!

yes

audio cable. Partybox 100 can only connect to Partybox 100

@@mygiguser Alright, thanks so much for quick answer :-)

@@mygiguser with audio cable you meen 3.5 mm jack [aux]? so with that cable you can connect all different speakers who have a 3.5 mm jack input? and when you do that you can still use bluetooth to play music? thanks

@@promo130 You can connect any speakers with 3.5mm …but you cannot use cable and bluetooth at the same time. Only bluetooth or only cable. The cable cancels the bluetooth function.

What do you mean by cutting out? Is something off on the 310? I was using 300s in my video

i wouldn't expect latency in aux cables

Thanks for quick response, I will check

How do I connect partybox 310 to 300?? I have cables but I still dont get them paired.. why is this so hard

Yes and no. I have 2 JBL 310 and had a outdoor party last night. 2 did the job but i now want 2 more. All i want to know if i can daci chain 4 JBL with 3.5mm jack or not. Anyone know that ?

I have 2 310s as well and that would be awesome of you could TwS all for em but I'm guessing we have to daisy Chain the 3rd and them send the sound wireless to the 4th if that makes sense

Good to know

So partybox go and a 110 or 100 can be connected?

@@AnthonyPerez hmm im not sure. I guess if you have both, you can try it

@@AnthonyPerez look for the bluetooth version, dor the 100 i think it's 4.2 and 110 it's 5.2,in that case no you can't, jbl sucks for that

@@bisken6547 doesn’t work I have both. Wired only.I just got another 110.

yes

idk, i dont have a Eon one

with wires

you need to connect all three with AUX cables

@@mygiguser How can i connect all three Boxes with an Aux Cable? There is only one Aux Connection on each Box! So that I can connect all three boxes with cable, at least one of the three boxes would have to have two aux connections. As I said, the boxes only have one aux connection

only with cables

@@mygiguser ok tks

@@mygiguser The 200 and 300 are the only different partyboxes that CAN connect to each other. This is because they are exactly the SAME speaker (same components, same user manual). The only difference is that the Partybox 200 does not have a battery. No battery (why would you want that🤷🏾‍♂️). If you add a battery to the 200, it becomes a 300. Unfortunately, on the other hand, you can only pair JBL PartyBox 310 with the same model. In order to achieve TWS mode, the speaker must be the same model with the exception of the PartyBox 200 and PartyBox 300 which can be paired together via TWS.

not that i know of

it needs the battery, but it can be powered by cable to an electric outlet

Armando Gutt the 100 and 300 can only connect to each other by wire.

no, just as i show it in the video

@@mygiguser okay gotcha. So essentially to do the opposite of what you did in the video(aux to aux out) one could do an rca to aux chord from the 300 to the 100 for both

I have several 300's all connected together by the in/out rca's and they work great, no sync problems.

The aux function on the box allows you to connect other non bluetooth speakers or devices to it. That's how he was able to connect the other 2 boxes. Even tho he used the TWS connection on all 4 speakers. It only allows two speakers to to talk to each other at a time. So the 300's had to use a daisy chain method to communicate with the 100's if that makes sense.

Lol, America must be happy with you too Kim Jong Un

What happened to kim jong phil?

Well, it’s an outside speaker, so 🤷🏾‍♂️🔊😄

no, partyboxes can only pair in pairs.

מיהו מלך?

only with wires

i think so, i just had those 4

Theoretically, you can connect infinite amount of speakers. Howver, after say 5 connections, you'll probabla hear the quality degrading. And by 5 connections, i mean 10 speakers

idk, i dont have a 310

Yes with android you can connect 2 different Bluetooth devices! :) so a pair of 100s and a pair of 300s . I do this all the time 👍

that can happen when your phone is paired to more than one of those speakers

@@mygiguser thanks 🙏 so that means it's not a wise idea to buy 2 speakers and use them for left and right stereo .. I was thinking to buy 2 and use them as left and right surround for my I pad at home for watching online movies 😥😥😥

@@susmusmanoj112 bro buy 2 110pb, you have TWS button from behind ,just press them on both 110 and you have perfect stereo sound with no delay and that s it, i look on how to connect 3 or more of these guys

yes, because you can't pair 300 with 100 or vice versa

Only with wires. For True Wireless Stereo (TWS)… You can only pair JBL PartyBox 310 with the same model. In order to achieve TWS mode, the speaker must be the same model with the exception of the PartyBox 200 and PartyBox 300 which can be paired together via TWS.

@@PlayitonPan what wires? Is an aux enough?

@@cody4723 Yes. An aux wire is enough.

@@PlayitonPan i actually tried it like 4 days ago and it did not work. Could you explain me what exactly you did?

I also wanna know

I wanna know too

@@PlayitonPan The answer is no, the wireless connection support for 2 speak with same model only.

@@lampln2011 Thanks ✅ “You can only pair JBL PartyBox 310 with the same model. In order to achieve TWS mode, the speaker must be the same model with the exception of the PartyBox 200 and PartyBox 300 which can be paired together via TWS.”

no you can't, they only pair with the same models. 100 with 100, 200 with 200, and 300 with 300, ...

@@mygiguser I'm thinking whether to buy a second PB100 or a PB200....since i'm getting both the speaker for the same price ...which one would you reccomend? I already have one PB100

Id get another pb 100

Intente emparejar solo uno de los altavoces con su teléfono. Y elimine el emparejamiento de los otros altavoces en su teléfono.

@@mygiguser es verdad con un solo altavoz no hay retardo fallo de JBL

Well I'm pretty sure. I have a 300 and a party box on the go and I'm wondering if I could connect a 300 with a go...

@@djmachado_flow the answer to my question ist yes. I already did it a few times. Use a daisy chain.

no

@@mygiguserit won’t connect with an aux cord?

@@raymailand7252 Yes, with an Aux cable you can conact them. I do this since i have the 310 and the 100

@@hagl_maxi7827 how can I do that?

@@finix7737 At first you go to amazon and their you buy an Aux cable, then you put the cable in the rigt holes, at your partybox 310 is a smal "display" their you push the button to Aux. Their also others for example for an Usb, or normal for Bluetooth. Than you have to connect the partyboxes with Bluetooth and so can have fun with them 😄, sorry i hope my English is ok😂

Wondering same thing