How to Polar Align a Celestron Mount (All star polar alignment)

Подписаться 50 тыс.

Просмотров 93 тыс.

50% 1

A live demonstration of an alignment and polar alignment of a Celestron mount (CGX). All Star Polar Align (ASPA) works on all equatorial Celestron mounts.
Support my alcoholism by getting some Star Stuff stuff:
/ @dylanodonnell
Dylan's Telescopes, Cameras & Equipment
----
Celestron RASA 8" Telescope
amzn.to/3G4nlbP
Celestron NexYZ 3-Axis Smartphone Adapter
amzn.to/3g20wLd
Skywatcher EQ8Rh Pro Mount
Usa : bit.ly/2NMD1em
Aus : bit.ly/3dxdRv1
Celestron CGX Mount
bit.ly/2H1LVl6
Celestron RASA F2 11" Telescope
amzn.to/3ABsVBz
Celestron 11" Edge HD
bit.ly/3eaxJRl
QHY268M Mono CMOS Camera
bit.ly/3dOFgbx
Lunt40mm Solar Telescope
bit.ly/39ggrTW
Sky-Watcher Star Adventurer 2i Pro Pack
amzn.to/3ABLAwQ
ZWO ASI 174MM (Planetary / Solar Camera)
amzn.to/3rXqJAj
ZWO ASI 120MM. (Guide Camera)
bit.ly/31bwspA
ZWO ASI 1600MM (Deep Space Camera)
amzn.to/3rXqJAj
Celestron 0.7x reducer for 11" Edge HD
bit.ly/379s0LI
Celestron 0.7x reducer for 9.25” Edge HD
bit.ly/351togR
Celestron 9.25” Edge HD
bit.ly/379Nqsj
Canon 6D mkII DSLR
amzn.to/2CbiVER
Tokina 16-28mm Lens
amzn.to/3fdFJCo
Canon EF 16-35mm f/2.8L III USM Ultra Wide Angle Zoom Full Frame
amzn.to/3G9kjmP
Canon EF 100-400mm f/4.5-5.6L IS II USM Lens
amzn.to/3H9yPfA
Dylan’s links
----
PATREON : / dylanodonnell
WEB : deography.com
FACEBOOK : / dylanodonnell
TWITTER : / erfmufn
INSTAGRAM : / dylan_odonnell_
Intro Music - "Moving the Ocean (Aerologic Edit)" by Blastculture.

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 338

@MikeLikesChannel 3 года назад

Take it from someone who observes in the Florida Everglades (basically a huge, humid swamp)... Thermacell for those mosquitos. It's almost as essential as the telescope.

@robertdepaulis5188 Год назад

❤Thermacell do nothing here in Australia , our mozzies laugh at it

@dankahraman354 4 года назад

Good tutorial for the CGX/CGX-L mounts. Thank you.

@Bridgestreetnursery 2 года назад

I just got my new Celestron AVX and followed the information here. WOW!! I'm one very happy camper. I have a Skywatcher EQM-35 Pro that I could not make work. I don't know why and right now I don't care. With this video I managed to align the mount and actually found what I was looking for. The WO Zenithstar 61 is catching light right now. Thanks again

@tomwall8403 5 лет назад

Just a tip. I use a red dot or Telrad finder to make searching for the alignment stars that are out of my cameras field of view. It saves a lot of time.

@jonyoder2356 5 лет назад

I have a green laser pointer set up next to my finder scope and it has made all the difference when trying to find an object.

@tomwall8403 5 лет назад

@@jonyoder2356 Lasers are handy. I've even placed one up to the eyepiece of my optical finder or refractor telescope. The beam projects into the sky and helps with rough alignment. It's not as accurate as having it mounted, though.

@FR3EKELITE 4 года назад

Great video as usual! I’m getting the Celestron AVX mount, this will help.

@hokep61 3 года назад

A few months ago, my new Celestron 8" SCT on the AVX mount arrived. While I love the scope, AVX alignment left a bit to be desired. Even with a full 4 star alignment....it was close but no cigar. That said, still figured I was missing something. I had checked this vid before my scope arrived, but thought I still might have missed something. Uhhh, yeah....like the whole "polar alignment" part! Waiting on clear skies to have another crack at alignment AND polar alignment. Thanks a million!

@Sakkie 3 года назад

Thank you for this brilliant video. Now I got no excuses of I don't know how to on my CGX mount. Great video especially for those in the Southern Hemisphere. Thank You, Sir!

@jamesdixon2085 5 лет назад

Thank you. I have been using Celestron mounts (ASGT, AVX, CGEM-DX) for years but did not know this option existed. I have a polar scope and align to that and hope for the best. I'll try this when it clears up again.

@timtim4664 5 лет назад

I have the CGEM-DX, and didn't know it existed either. I always polar aligned by eye, and then did the 3 star alignment. Never got good results.

@jamesdixon2085 5 лет назад

@@timtim4664 I tried it a couple weeks ago and got excellent results. I was shooting Jupiter at f/20 (5600mm fl) and it stayed in the little box I drew around it. Its not hard either.

@mbaddah 6 лет назад

Can't believe how easy those Celestron mounts make it to polar align. I think you've sold me on one :) Thanks mate for taking the time to do this!

@DylanODonnell 6 лет назад

Mohammed Ali Baddah no worries! Most underrated feature of the mounts really!

@steveh6632 4 года назад

Thanks very much Dylan. That told me exactly what I needed to know and made Polar Alignment so much easier.

@kompakt34 2 года назад

Many thanks from France ! i will stop loosing my time with polar alignement !

@lawrenceharris1819 4 года назад

I had not realised the significance of this feature on the handset. Thanks for a good explanation. I have a finder scope accurately aligned to the main scope so this should help. My only concern is my CGX scope's backlash - but that is another story!

@gpetheri Год назад

There are some good RU-vid videos on fixing CGX backlash, and some other issues with these poorly assembled mounts.

@astrospeedcuber Год назад

I've always had an issue with the tracking on my AVX mount, never knew you could do this, thank you!

@DylanODonnell Год назад

No worries! It’s weird how unpromoted it is that there’s a PA routine in all hand controllers.

@hifinphoto 4 года назад

Why not mention how you got the star-map on the compute, how does it connect (and to what), is it a software that came with the mount, is it a free 3rd party software, etc ?

@xavierhernandez7787 3 года назад

I'm having exactly the same question!. Dylan, please help! :-)

@jomac2046 3 года назад

Sequence Generator Pro

@jcinaz 3 года назад

So here's how I set up modeling for my telescope (aka, T-Point for some, two-star align for others). 1) Let the hand control tell me what star it wants to center on. 2) Enter that star name in the Framing tab of N.I.N.A. 3) Let N.I.N.A. do the search and centering with the aid of plate solving using ASTAP. 4) Go back to the hand control and finish the model and align operation. 5) Repeat until modeling is done. Oh, so simple! By the way, I think this could also be done with SGP, MaximDL, TheSkyX, and others - any app that can perform search, plate solving, and centering. Throw away your Finder! Not needed anymore - unless you're doing visual astronomy.

@mode1charlie170 5 лет назад

Great video Dylan. I used to do this on my back deck with an eyepiece and lighted reticle. It never worked very well for me as my guiding was always substandard. I finally figured out that as i stood next to the scope to adjust the alt/az knobs my weight was deflecting the wooded deck , ever so slightly, give me a false reading on my alignment....grrrr one of the many mistakes i have made in this hobby....lol

@DylanODonnell 5 лет назад

Hehe happens to the best of us!

@MrGp3po 2 года назад

Fun to watch early videos. Your production quality is vastly improved!

@DylanODonnell 2 года назад

Haha I have finally switched from iMovie lol

@tonyboutle1315 4 года назад

Cool, Dylan just bought an AVX and position prevents a view of Polaris. This is a great help and seeing it live is so useful! 👍

@tonyboutle1315 3 года назад

@sameera 271 sorry for the late reply, it works well, I do a 2 star alignment, add four cal stars then polar align with ASPA. Good enough to guide from.

@tonyboutle1315 3 года назад

@sameera 271 sure it should, will depend on the atmospherics as well of course.

@tonyboutle1315 3 года назад

The question is do you need to capture that long dependent on the camera, shorter subs are less prone to changes, cloud, Star link etc...

@johngardner9052 5 лет назад

Thank you for this, Dylan! I'm new to telescopes and after three tries on my first night out I got polar alignment that was good enough for the scope to find Saturn, but not enough to be centered in the eyepiece. I look forward to trying this tonight!

@DylanODonnell 5 лет назад

Unless you have a multipoint model of the sky goto’s won’t be 100% accurate. That’s where plate solving helps.

@deanmindock5020 6 лет назад

Thank you Dylan. Us noobies do need basic info like this, I always wondered what the old pros were talking about when they mentioned 2+4 alignment. BTW, you got quite a setup. Kudos.

@DylanODonnell 6 лет назад

Hey thanks Dean .. I'm glad it has helped!

@ezza2fly 5 лет назад

I'm learning to polar align and found this video very helpful because you didn't skip over things and kept the camera rolling. It really is quite a process(to a newbie). I had quite a good sweat going by the end of polar aligning last night. It was really good to see you were a little warm at the end of the process too.:-) I have to carry my gear out each time, how good would it be to have automated, perfect alignment?

@DylanODonnell 5 лет назад

I'm glad it helped! Yes someone needs to make the mount that aligns itself :)

@Mobius3c273 3 года назад

Brilliant polar align video... I love you :-)

@pinzyrat 4 года назад

Thank You Dylan!!!! You are very generous!

@HowardGambergrotowerkz 3 года назад

TY. Best vid i have found on this. will be testing this evening , weather allowing, with my rc. thanks again hg

@DylanODonnell 3 года назад

It’s quite good!

@corsair438 5 лет назад

If you have a ccd and filter wheel attached, here’s a trick I use to get an early alignment before the sun is down. First setup as close to north as possible, then with the hand control do a ‘quick’ alignment. After slew to a solar system object. With mount adjustments get the object centered. I find this gets me within less than a degree. Next go back to home position and start anew with the “two star’ alignment, but this time with ccd at shortest exposure and h-alpha or s-ii filter in place. With a bit of luck 1mag stars should be visible. Now are ready for the ASPA. I’ve achieved less than arcmin accuracy doing this.

@gettingpast4391 5 лет назад

Good info. Thanks. I tried to do this once before and could not quite figure it out. Your video made it clear, thanks.

@DylanODonnell 5 лет назад

Glad it helped !

@iamjessieray 2 года назад

I know this is an old video at this point, but this is great! I have the older celestron CG5 mount and I'm totally going to check and see if the hand controller has this feature on the next clear night. I'm one of those dorks who still uses my hand controller for the initial alignment, mostly because I have issues with the mount not knowing where it is when I first turn it on and try to use it with my computer.

@robertsipes7391 Год назад

Hello from another hand controller dork!

@davidschilling 4 года назад

Thanks, Dylan. This was perfectly explained. Greetings from Brazil.

@notlikethis9932 5 лет назад

You video saved my first observing and eaa session with a Celestron AVX! Thank you so much!

@DylanODonnell 5 лет назад

Oh great! Thanks Sebastian!

@notlikethis9932 5 лет назад

Well, i had a clear night to test my tiny setup a bit and this is the result - what do you think about it? abload.de/img/ngc7814ober7.jpg It's NGC 7814 and yes it was the only object to image from a tiny balcony. Not the best choice but hey ... better than nothing. The image was live-stacked with Sharpcap, 360x 5s, unguided. Using a Celestron C6 XLT + 0.63 reducer i am looking for a matching camera now. The ASI385MC is nice for lunar and planetary but DSO are not that great with it. Do yu know any source how to get a nearly perfect camera for a specific scope?

@dankahraman354 4 года назад

Yes a rough start with a camera instead of eyepiece in focuser...I will use an eyepiece next time. I have also written customer support at Celestron. I am 26' (below) in altitude from NCP, and 1' 26" too far west in azimuth. I can't raise the altitude without the knob becoming loose. I rotated the pier very slightly to the west as I was at the extreme left of the slotted openings at the top of the (4) base plate...so out again tonight, if any breaks in the clouds, to make azimuth adjustments with Sharpcap.it will be very difficult to get very accurate positioning in azimuth as I don't have fine control or the range is extremely limited, unless my slight rotation happened to fall within the narrow azimuth adjustments...with the altitude, impossible until I get some advice from tech support....I want the PA in excellent alignment in PA before I start the ASPA although this could be redundant....however I have imaging as the goal.

@RichardKincade 3 года назад

This is excellent thank you. I’ve been using the D.A.R.V (Drift Alignment by Robert Vice ) method but the seems way easier and quicker.

@davidheflin5847 4 года назад

I just found this video. Thanks, I have an older CGE but it has the same polar alignment.

@starwatcher 3 года назад

Thanks. Very helpful. Difficult for you. Appreciate all the work and answer and bug bites.

@stratos9914 4 месяца назад

Thx from Greece!

@zxwmabcdef5439 4 года назад

My grandfather used Betelgeuse, Sirius, Rigel, and Pollux as a clock. I don't know how he did it. He would look at one of the stars and get the time within 5 minutes. He never owned a watch.

@MrSpychecker 3 года назад

ASPA even works perfectly with my wedged Alt-Az!

@SteveHomer 3 года назад

Thankyou for the great video! very helpful as im a beginner - also, What software were you using on the PC?

@jcinaz 3 года назад

If you use plate solving to center the star for you during your two star alignment, you wouldn’t need to bother with a finder scope at all. You might have to nudge the star a bit after plate solving, but if I’m wishing 5% of center, I don’t even bother with that. Plate solving takes all the drudgery out of finding and centering on objects.

@tedwilliams3875 6 лет назад

Thank you for sharing! I was trying to figure out how to do this because the Celestron Crappy manual sucks! Loool Seriously thanks though for sharing! Nice observatory! :)

@DylanODonnell 6 лет назад

Ted Williams haha good to hear it helped ! And thanks!

@jacquechanny945 6 лет назад

Ted Williams Postman Buy Celestron Telescope From SOUTHMINSTER SCHOOL CARAVAN ENGLAND CM0 Chilldren Birthday Today 😍😍😍😍🙂😍😍😍😍🙂🙂🙂🙂🙂🙃🙃🙂🙂🙂🙂😍😍😍😍😍😍😍😍😍😍😍😍😍😍🌞🌞🌞🌞🌞🌞👨‍👩‍👦‍👦

@jerrybarr7606 4 года назад

Hey Dylan good video/what part austtralia you from/have a few ham friends there/

@warrenbracewell6310 2 года назад

I think Celestron wants you to do another two star alignment after you finish the ASPA.

@michaelbrennan2936 3 года назад

Hi Dylan, I have the same mount and I was wondering if you have the same issue when you tighten the Altitude Lock Knobs that it moves the star a bit. The same thing happens when I tighten the Azimuth bolts too but to a lesser degree. I find myself doing a trial and error trying to compensate for the movement.

@coltenquackenbush23 6 лет назад

Thank you so much! you just answered like 50 of my questions ill sub (:

@DylanODonnell 6 лет назад

Colten Q. That’s great news! Thanks for subscribing !

@alissoncaetano8034 4 года назад

Thanks for the video, dude. It helps a lot. In my university here in Brazil we have a similar telescope model. It's a Celestron CGEM that came to us 5 months ago. We're getting so much trouble to calibrate it. We don't know how to make the telescope track the astro's movement.

@jalbert9613 6 месяцев назад

This is a great video. I cannot see Polaris because trees block my view. Thank you

@bobmimiaga 6 лет назад

Thanks Dylan for the helpful video. Sorry about the mosquitoes!

@DylanODonnell 6 лет назад

bobmimiaga hehe thanks Bob!

@cjwetzel22 3 года назад

I don't understand how you can do a star alignment first and then do a ASPA (all star polar alignment) next. With the initial alignment, you have aligned the mount with the star field and then you do an ASPA which requires you to adjust the mount knobs. It seems to me this mount knob adjustment would throw off the initial alignment because you are manually moving the mount with the knobs. How would the software know the mount has been moved?

@ernestjoyner1553 6 лет назад

Good job Dylan, It was about time for a Video like this one.

@DylanODonnell 6 лет назад

Ernest Joyner hey thanks Ernest ! 🚀

@doccortex1203 3 года назад

That's if the mount is up to scratch. My CGX has been a piece of rubbish from day 1. Sent my PHD logs to Celestron, and "suggested" I do this and that - don't they think I have already tried it!

@anthonysacco2276 7 месяцев назад

Thank you. That was very helpful.

@bitnbytes01 3 года назад

Thanks for showing this, nice video and well presented.

@paulwilson8367 4 года назад

Ha. This fella could feel right at home here in North Central Texas, we have a mosquito population to rival his! That does still seem like a lot of star centering. I however have a CPC Alt/Az and I wish at times I could polar align and try small time astro imaging. The only thing the CPC has going for it is the built in GPS.

@Jeep2012 3 года назад

Fantastic video. I can see this really helping me.

@brendanmanning1959 Год назад

Thanks. Great help for newby

@zxwmabcdef5439 4 года назад

Does that mount have limit switches so it won't run into itself? My reflector ran into itself and sheared off the bracket for the guide scope, broke a 350$ servo motor, and broke a 250$ worm gear.

@scottbrown6021 6 лет назад

That is a great looking rig you have looks like a lot of fun

@DylanODonnell 6 лет назад

Thanks Scott! Im lucky to have such a good setup currently. It's all fairly recent tech.

@Brossel 6 лет назад

Thank you Dylan, regards from Brazil, where we dont have a north star at all.

@DylanODonnell 6 лет назад

Hi Andre! 🇦🇺🇧🇷

@ebenezergarbrah5255 6 лет назад

Hello, will this still work when you can't see the North Star or even ocean for those of us in the south

@deanmindock5020 6 лет назад

Yep. Dylan is way way south of the Equator. The 2 + 4 method he described is for Celestron mounts, as far as I know. Celestron has an optional device called StarSense for easy star alignment which will also work for some SkyWatcher mounts. Maybe, don't know for sure. some Orion mounts too as they (SkyWatcher and Orion) both use SynScan hand controllers by a Chinese company called Synta.

@ziasiddiqui5711 Год назад

Does anyone know what software is being used here on the computer screen which is showing the stars with their names?

@zxwmabcdef5439 4 года назад

Polar alignment is also a pain in the rear for us northerners who live close to the equator. During the summer Polaris is below the northern horizon. The closest star to the north pole I can see is Mizar.

@Flossin1987 3 года назад

Thanks for the clear instructions.

@helthuismartin 10 месяцев назад

Does it keeps it settings when you turn the scope off .???????

@SkuppyVincenzo Год назад

Hey Dylan, for the rough polar alignment I point my Cgx directly to the south and set my latitude to my location in Melbourne like 37. When I do the 2 star alignment and the scope finds the first 2 stars, the the mount is way off those stars it wants to align to. Is my rough polar alignment correct ?

@zxwmabcdef5439 4 года назад

My mount on my 12" newtonian has a polar alignment scope it was a waste of money. Polaris is way below the horizon for half of the year. I get good results using big bright giant stars like Betelgeuse, Mierope, Arcturus, Rigel, and Pollux.

@sher9762591 6 лет назад

This is completely opposite to how I polar align. I normally polar align first then calibrate the goto. It made me wonder if i have being doing this wrong since I started. I have the Celestron AVX mount so I believe it has this function built in to the mount.

@DylanODonnell 6 лет назад

That's fine to do that way if your mount doesn't move.. everytime you go through the processes it gets closer. But I believe the mount needs to know the star alignment first before it knows how far out the polar alignment star really is. And yeh I think your mount supports ASPA .. a most underrated feature!

@deanmindock3680 6 лет назад

My peeps, afaik, do polar alignment first. Celestron mounts and their align methods seem to work though.

@frankbraker 4 года назад

This looks like a great feature - I hope I can find something like it on SynScan. Also... if it was NOT available on other slewing hardware, it would be really fantastic if it could be added as a feature to PHD. Right? I imagine it could be done? Same story with the "spiral search" feature - couldn't that be added to PHD? Thanks again for the video!

@karcoms 3 года назад

Dylan, what's that software you are using that looks is showing plate solved names of the stars in there?

@2badger2 5 лет назад

Now this is nice! I thought you had to polar align first and then star align.

@DylanODonnell 5 лет назад

I hope it helps!

@seanmolony-redstickastro238 6 лет назад

I just got a 4K Mavic Air. It's got a great camera on it. I've been just doing basic things with so as to get comfortable. My plan is to use my Rhino Slider or my Ioptron Sky Guider Pro to capture Milky Way shots over the swamp this summer and blend so aerial shots before and after. A lot to learn! Ha ha

@nadeemmohammed4770 4 года назад

Only Celestron has this alignment feature? Does any other brand have this?

@lucasswart2987 2 года назад

Very helpful, thank you!

@benjamindbaker69 4 года назад

Hi Dylan, thanks for the ASPA video. Which software are you using during the star and polar alignment? Is it Celestron-specific?

@nikrock7087 5 лет назад

Thank you very much! I had so many questions you have answered.

@DylanODonnell 5 лет назад

Good to hear .. thx!

@BritishBeachcomber 3 года назад

Strewth! How do you ever find the time to do astronomy down under!

@scottbadger4107 3 года назад

Is it possible to combine the All Star methodology into the initial Two Star Align procedure? When the scope slews to the first calibration star, instead of using the hand control, adjust alt/az on the mount, or even shift the tripod, to center it. Then press Enter/Align to continue with the Two Star (or more) Align. When the mount does the first slew, it's going to where the star would be if it were already PA, right? So wouldn't centering the star by adjusting the mount's alt/az, or moving the tripod, both accomplish the first star calibration and PA at the same time? And also eliminate the need for updating the star alignments after the All Star PA as the manual recommends?

@seangross5663 4 года назад

Dylan...I have a question about aligning my telescope. I have an Orion 8 inch Newtonian mounted on a celestron advanced vx mount. I live near Wilmington, DE in the US and the light pollution around me makes it almost impossible to polar align to polaris. I can make out Cassiopia and the Big Dipper, but when I look through the polar alignment scope I can barely make them out and most times I cannot make them out enough to match them with the polar scope. So I was trying your All Star Alignment method and could not ever seem to find the stars it was trying to align to. When I was watching this video you made it seemed like when you found the star that you were trying to align to it looked very big on your screen (almost the size of the center circle...if not bigger). The biggest stars I was seeing on my Backyard EOS program screen were pinpoints. Are the alignment stars supposed to be much bigger or how do I tell which star is which when aligning? Any help you could provide would be greatly appreciated.

@OzzMazz 3 года назад

Hi, is there a similar technique using a skywatcher mount and hand controller? The hand controller I have does not have an 'Align' button.

@DylanODonnell 3 года назад

Yep! It’s in the manual.. I’ll do a video on it eventually.

@jbreezy3146 Год назад

I know this video is old but during the polar alignment process besides azimuth kbobs am I supposed to also play with the lattitude adjustment knobs? Becausse I have to adjust all 3 in order to get the star for polar aligment in place.

@DylanODonnell Год назад

From memory (it’s been a while and I don’t have this mount anymore) .. it asks you to Only one axis at a time. Get the star as close as you can, doesn’t have to be dead Center. Then it will ask you to do the other axis next and it will be dead Center. If it’s not, run through the whole process again.

@michaelm5149 4 года назад

So if I point my mount roughly at Polaris, do my alignment stars and calib. stars, then use the polar alignment feature in the menus that will be just as good as doing a proper polar align before the alignment process?

@Ronbo765 4 года назад

This helps! I thought that GoTo alignment mean the mount was polar aligned. Its only roughly. Needs the ASPA procedure to do photography. Does it make any difference what your mounts initial alt/az starting position is? That is, I assume you have the RA axis roughly pointed at the S celestial pole because I observed that the mounts first slew was to the correct general direction of your chosen star (Achernar)?

@DylanODonnell 4 года назад

Yeh the starting position must be at the celestial pole. Before you even turn it on.

@oldschooldiy3240 5 лет назад

I am quite new to star gazing and astral photography, and can't help but wonder- are there no mounts that allow you to enter your latitude and longitude with altitude to calibrate star/planet/nebula tracking? It just seems to me that these companies that charge thousands for these systems would have figured that out by now!

@lancewilliams8732 4 года назад

Hi Dylan, I have been watching your videos with interest. I use a Starsense on my CPC800. I was looking at a Hyperstar, but have decided against it, More that I am wary of purchasing a wedge. After considerable thought, I have decide to keep the CPC800 as a purely visual scope, and eventually invest in a RASA. My question is, would the Starsense be of value in initial alligment, and subsequent polar alignment of a RASA with much the same configuration as your ?

@HollomanUFOLanding 2 года назад

Did you ever try starsense with your RASA? I was wondering the same as you.......

@profeluisegarcia 2 года назад

¡¡THANKS FROM COLOMBIA¡¡

@templecave9507 5 лет назад

Dylan, what software are you using? It looked like the stars were labeled. Was it plate solving? Also, the reticle for centering would be useful.

@DylanODonnell 5 лет назад

Sequence Generator Pro .. but that was focus data, not plate solving :)

@jcinaz 3 года назад

Spiral search? Use plate solving!

@JethroXP 3 года назад

Curious why, with the proximity of a PC to your mount, you still use the hand controller? Is it just personal preference and what you are familiar with? Why not use CPWI on the PC to control the mount? Is there some capability the hand controller offers that CPWI can't match? Just the convenience of not having to enter time and location each time you power on the mount should be motivation to use a PC for control.

@DylanODonnell 3 года назад

CPWI doesn't handover to ASCOM nicely so other programs (and dome) can all interface nicely together.

@JethroXP 3 года назад

@@DylanODonnell Thank you! I'm new to this, purchased my first telescope about 4 months ago. I have an EdgeHD 8" on the Evolution mount, and recently added a wedge. Now thinking about adding an OAG. I control the scope using CPWI on a laptop connected to the mount via Wi-Fi. Allows me to control the scope in the backyard from inside the house. The laptop stays outside because the camera is connected to it via USB, but I use Remote Desktop on my PC in the house to access CWPI and BackyardNikon running the the laptop. I assumed my guiding would use ASCOM to send correction signals to the mount through CPWI, but if that isn't reliable I'll have to rethink my approach.

@mohammadranjbaran1897 3 года назад

Thank you.

@zirconzircon8861 3 года назад

Nice video, Dylan. When you were at the last stage of Polar Alignment and you were using the Altitude knob and Azimuth knobs to center the star ( or same thing if I'm using the PoleMaster) the azimuth knobs don't always have enough play to move the star left or right into the center. So I find I have to loosen the four hex bolts on the base (CGX-L mount) in order to give the azimuth knobs enough play. Guess I'm not roughly Polar aligned close enough to begin with. Any suggestions? Because tightening up those hex bolts sometimes moves the star or Polaris off center again.

@Mistr_A 6 лет назад

Easy to understand, great video, pity the focus was all over but understandable considering the circumstances

@DylanODonnell 6 лет назад

Thanks Nick!

@paulbubeer911 3 года назад

Does this only work on Celestron mounts?

@dankahraman354 4 года назад

When are you going to introduce us to your chipmunk friend?

@clemenskemper6833 6 лет назад

What software are you using on your mac there? Awesome Video, thanks so much! Gonna try my first alignment tonight!

@DylanODonnell 6 лет назад

Heya! I'm using Sequence Generator Pro frame and focus to view the "real time" feed from the telescope. Hope this helps!

@midnightlightning1 4 года назад

Interesting video. Looks like you are using SGPro, if so cant you just use "Solve and Sync" to get aligned?

@danieltobosi1592 6 лет назад

hello. thsnk you fot thisd video!!! verry verry helpful. pls, can u tell me what soft did u use there on the display? and is it is conect with the mount and scope? thanak you

@captbuscemi 6 лет назад

Hey Dylan, great video! Quick question: the CGX is an equatorial mount, yet you adjust the screws for altitude & azimuth, is that right? I know you corrected yourself when you initially said RA and DEC. Also I take it you still physically align your mount as close as possible to the SCP to minimise your reliance on software-based polar alignment?

@DylanODonnell 6 лет назад

Yes that's right .. they are alt/az adjustments ... 0 degrees = horizon, unlike RA/DEC where 0 degrees / or hours is somewhere in the sky which changes based on where you are. The directions are the similar (left/right/up/down) which is why I lazily used the terms interchangeably. There are a few different methods for "rough" polar alignment .. I really should make a video about it!

@captbuscemi 6 лет назад

Dylan O'Donnell Please do! I’m an absolute beginner, making up a wishlist of astrophotography gear to get started. I’ve got somewhat dark skies and a nice back yard (actually small acreage just out of town), but the SCP is blocked by a hill and trees. I’d love to know a “good enough” method of polar alignment, don’t know if I could be bothered doing drift alignment every single session though.

@stephenlast6945 4 года назад

hey there dylan. does the all star polar alignment method basically replace the need for the polar finder scope method for aligning your mount? granted youre oriented north and lat set? or should both be used in conjunction with each other?

@soulmuzings8844 6 лет назад

Sending you good vibes 🙏🤗

@LebSista 5 лет назад

Thank god finally someone with the same scope as mine AND in Australia! I had issues with getting mine properly aligned. How did you position your tripod prior to fitting mount, isn't it supposed to be facing south? Did you use a compass? Cheers

@DylanODonnell 5 лет назад

Yeh it’s a hassle without a good pole star like the northern hemisphere. I have a trick I’ll need a video to demonstrate. Stay tuned! And high five for having the same scope :)

@gianniformica8235 4 года назад

What camera is it using here... Guide scope or the one in the image train?

@nancyricigliano19 6 лет назад

Great video dylan

@chadr2604 3 года назад

You have mosquitos I killed a horse fly at the gym. I didn't want leishmania it landed on a bench and looked at me working its biter. That fly was looking at me thinking about biting nice juicy deltoid. I hit it with a 75 lb dumbbell. A woman here in Sugar Land got bit on the neck by a horse fly she had leishmania.