Тёмный

How-To POLISH GELCOAT - Shine like NEW again - DIY Pro Level Results Restore Your Gel Coat like new 

Fish Bump TV
Подписаться 46 тыс.
Просмотров 296 тыс.
50% 1

So, the GEL COAT on YOUR boat or RV is badly faded and oxidized! That's OK, I am going to show how to make your gelcoat shine like new again! Gelcoat restoration is not Rocket science, BUT You do need to know what you are doing to get quality results. My family has been building and restoring boats for over 5 decades, and we specialize in fiberglass and gel coat repair. I am happy to show You some of the techniques we use to bring back a deep gelcoat shine that will last. This is an in-depth video with 5 important steps you need to follow to get pro level results, so please follow along as I share my tricks of the trade with You. If You find this video helpful, please remember to subscribe, like, comment and share. That helps us to make more helpful videos like this. If You have a gelcoat, fiberglass, or boat building related question, feel free to comment. I will do my best to respond with a helpful answer. Thanks so much for watching! _________________________________________________________________________________________________
www.fiberglasswarehouse.com use code FISHBUMPTV for 15% off your 1st order.
patreon.com/FishBumpTv
_________________________________________________________________________________________________Amazon Affiliate Links:
Work Light amzn.to/3J1m3lB
Acetone - amzn.to/3tMTUes
Mechanic Creeper - amzn.to/3HglXFW
40-Inch 6 Caster Creeper amzn.to/3QsJasj
Air Compressor - amzn.to/3TSUrGe
Heavy duty drum fan - amzn.to/48K6aej
Gloves - amzn.to/41OpwNk
Dust Mask - amzn.to/4aPu7TC
Hutchins Mfg Air Tool amzn.to/3NRYqyY
3M Hookit Purple sand paper amzn.to/3Ha2mr6
Sand paper - amzn.to/3TRgygk
Shop Towels amzn.to/3vsRdiC
DEWALT Buffer/Polisher, Variable Speed, Soft Start, 7-Inch/9-Inch amzn.to/3kYudmI
Presta Green Blended Wool Polishing Pad amzn.to/3IX64VD
Presta Heavy Cutting Pad amzn.to/3YqExS4
Presta Super Cut amzn.to/3tCJ4aT
Meguiar's Cleaner Wax amzn.to/4aGnkLI
3M Perfect-It Gelcoat Compound + Polish amzn.to/3IZr26k (previously 3M 06045)
Wax amzn.to/3S9sYPb
Safety Glasses amzn.to/3vSSqN7
Tape amzn.to/3QsGvij
Medium Cutting Pad amzn.to/48mL3is
As an Amazon Associate, I earn from qualifying purchases.
_________________________________________________________________________________________________
how to fix chipped gelcoat, how to restore gelcoat on fiberglass boat, prepping fiberglass for gelcoat, gelcoat or paint for boat, how to apply gelcoat to fiberglass, how to do fiberglass repair on a boat, how to repair fiberglass boat transom, polish, gelcoat GELCOAT Gel Coat gel coat repair gel coat restoration gel coat oxidation faded gelcoat buffing gelcoat compounding gelcoat waxing gelcoat gelcoat repair repairing gelcoat fixing faded gelcoat gelcoat scratches fiberglass repair scratched fiberglass boat building fiberglass boat building gelcoat boat

Хобби

Опубликовано:

 

1 дек 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 325   
@matthewpocock4824
@matthewpocock4824 2 месяца назад
This channel is like a boat building apprenticeship. First class instruction and trade tips 👍
@FishBumpTV
@FishBumpTV 2 месяца назад
Wow, thanks! Glad you are enjoying the videos!
@matthewpocock4824
@matthewpocock4824 2 месяца назад
@FishBumpTV I learned a little about boat building and fibreglassing from my father when I was a teenager. Now I'm 50 years old. I want to build a 13ft vee nosed punt from scratch. The information you give is pure gold. I thank you for sharing the wisdom of a professional 👍
@shawngeraghty6347
@shawngeraghty6347 3 месяца назад
Searched youtube for how to polish gelcoat and your video popped up. My oxidation is minor, but your explanation of the steip-by-step process from severe oxidation was the best I've every seen. Again, my situation was jut the last two steps, but I learned a so much from your video. So good, that you got a new subscriber. Thanks.
@FishBumpTV
@FishBumpTV 3 месяца назад
Thanks so much, and welcome to the channel!
@Darryl67photo
@Darryl67photo 6 месяцев назад
You’re a great instructor. You clearly explain what you’re doing. You take it step-by-step you’re a good communicator. I’m very impressed with your videos. Thank you for taking the time to do what you do.!
@FishBumpTV
@FishBumpTV 6 месяцев назад
Wow, you are so welcome! Thanks you very much for watching and commenting!
@michaelgreene1149
@michaelgreene1149 6 месяцев назад
Loved the whole video from a real pro. I've been around and in boats for 65 years. I'm 72. What a great detailed instructional video. My bass boats are garaged. I have always wanted to see how professional boat builders and fiberglass pros work the fiberglass and bring gelcoat oxidation back to its original shine is great. I watched 3 of your videos. I have never seen you on RU-vid before. I will look for more. Never to old to learn and work. Thanks. Washington State resident.
@FishBumpTV
@FishBumpTV 6 месяцев назад
Thank You Sir! I appreciate you taking the time to watch some of our videos, Glad you found them interesting! We are really working on putting out a lot of How To and DIY type fiberglass and gelcoat related videos currently, so stay tuned! If you have any suggestions for content, I would really like to here you thoughts! Washington state is beautiful! I have visited it a few times, and would love to come back for more! Thanks again for watching!
@alan.schertz
@alan.schertz 5 месяцев назад
Joe, I cannot state how awesome your presentation skills are. I think I have gone thru about 1/2 dozen of your videos and cannot believe how excellent they are.
@FishBumpTV
@FishBumpTV 5 месяцев назад
Wow, thank you so much! Glad you are enjoying the videos!
@paulclarke1730
@paulclarke1730 Месяц назад
Love the long, detailed format. I’ve watched it all the way through, then repeated several weeks later, again all the way from start to finish. Great work!
@FishBumpTV
@FishBumpTV Месяц назад
Awesome, thank you! I really appreciate that!
@MooTuberyt
@MooTuberyt 5 месяцев назад
I’m restoring a heavily oxidized black boat. I’ve watch a dozen videos on the subject. This is the best so far.
@FishBumpTV
@FishBumpTV 5 месяцев назад
Glad to help, thanks for watching!
@motorv8N
@motorv8N 2 месяца назад
Fantastic lesson - thank you. I’m that guy standing in the boat detailing aisle scratching his head looking at all the different pads and compounds and creams and such, then saying “Ah maybe next season” lol.
@FishBumpTV
@FishBumpTV 2 месяца назад
Thanks! I hope the video will help eliminate some of the mystery involved with this process! Best of luck with your next gelcoat project
@motorv8N
@motorv8N 2 месяца назад
@@FishBumpTV - Definitely! I’ve got a 17ft Scout dual console and because it’s that off-white Scout uses I’ve gotten away with gelcoat neglect for far too long. Now even that colour looks pretty sad so will finally tackle this thanks to your tutorial. Cheers (BTW - I noticed you scoured right over the decals. I’m assuming if you go light it won’t hurt them? I don’t want to mess up the blue script and stripe on the side of the boat.)
@grizzlybear4122
@grizzlybear4122 2 месяца назад
Sounds like just buy it all from this video.
@JohnColeman-ul5rj
@JohnColeman-ul5rj 2 месяца назад
Just did half my boat. I used stuff called shine supply chop top and jescar power lock plus to seal it. I watch Drake the boat detailer on RU-vid for this stuff and you for boat fix, repair, and build stuff, which is amazing. The colinite works great for after polishing aluminum T-tops and leaning posts to seal it from oxidation. Another great video, though!!! Always take ideas from everyone and find my own way.
@FishBumpTV
@FishBumpTV 2 месяца назад
Thanks for watching! Glad to help you with the fiberglass and gelcoat side of things! I appreciate the helpful suggestions and comments as well!
@idahoman325
@idahoman325 2 месяца назад
Your instruction is top notch. As you state your a builder , I'd bet you doing a series on creating a Tiny fishing boat would be a huge hit on here as clearly there is a HUGE section of guys watching thousands of hours of converting / creating/ modifications from skiffs, plastics/ kayaks etc but seeing how a master boat builder would go about things would be impressive especially with your attention to detail / style of instructing.
@FishBumpTV
@FishBumpTV 2 месяца назад
Wow, thanks so much! I appreciate the suggestion!
@jeffbaldwin9842
@jeffbaldwin9842 2 месяца назад
Wish I had seen you do this a year ago. I busted my butt compounding and buffing only to get a very unsatisfactory result. I got a good shine but a mottled look to the light grey color. Your video makes me think I probably needed to wet sand as it was apparently heavily oxidized. You make it look easy, nice work!. Thanks for the tips, looks like I might be doing the job again!
@FishBumpTV
@FishBumpTV 2 месяца назад
Yes, it sounds like you may need to go a little more aggressive to remove the heavier oxidation. Glad the video was helpful and I wish you the best of luck with your project!
@carnivorellama772
@carnivorellama772 2 месяца назад
Thank you so much for all your high quality videos! So informative, I’ve learned a lot from you. My 40 year old motor yacht appreciates the love I’m able to give it due to your instruction. Thanks again!
@FishBumpTV
@FishBumpTV 2 месяца назад
Glad to be able to help you keep your motor yacht in good shape! Thanks so much for watching and commenting!
@static135
@static135 Месяц назад
Thank You for taking the time to make these videos. You gave me the courage to attack the sun damaged gelcoat on my recently purchased boat. It looks amazing now. You are a true gentleman to share your trade with the world
@FishBumpTV
@FishBumpTV 29 дней назад
That's awesome! Glad the videos are helpful!
@deancleavesmith
@deancleavesmith 6 месяцев назад
Very thorough approach and the result cannot be disputed. Thank you this has helpmed me work through what I need to do for my boat.
@FishBumpTV
@FishBumpTV 6 месяцев назад
Glad to help, thanks for watching!
@jjclarkson3261
@jjclarkson3261 4 месяца назад
Your video is 'no joke restoration' with many fully explained tips and especially products used. I'm thinking about trying this on our camper
@FishBumpTV
@FishBumpTV 4 месяца назад
Glad it was helpful! I appreciate you watching
@tuhesse
@tuhesse 4 месяца назад
SO VERY INFORMATIVE! GREAT JOB JOE!
@FishBumpTV
@FishBumpTV 4 месяца назад
Thanks so much, glad you enjoyed it!
@jerryweicken3015
@jerryweicken3015 5 месяцев назад
Very informative. Looks like I’m going to add this procedure to my winter todo list. Thanks for your Videos.
@FishBumpTV
@FishBumpTV 5 месяцев назад
Glad it was helpful! Best of luck with your project!
@boatman222345
@boatman222345 Месяц назад
Easily the best video I've ever watched on gelcoat restoration! Five thumbs up and thanks for sharing your experience!
@FishBumpTV
@FishBumpTV Месяц назад
Wow, thanks so much! Glad to help!
@waterski40
@waterski40 Месяц назад
I’ve restored about 10 boats and his instruction is the best I’ve ever watched.
@danhogan1047
@danhogan1047 4 месяца назад
Great video. Have a 38' Horstman Trimaran, you have given me the confidence to do my own polish and wax. Thanks so much,
@FishBumpTV
@FishBumpTV 4 месяца назад
Thanks, glad to help!
@barrybicknell2148
@barrybicknell2148 5 месяцев назад
I am in SE Florida, the oxidation capital on an in-water 45' power catamaran just 6 years old. The cost/charge to compound wax was $2,600. With you instructions, suggestions of power equipment and products to use, I have some confidence to try to keep my gelcoat up going forward. Thanks from the sunshine state🌞
@FishBumpTV
@FishBumpTV 5 месяцев назад
Glad to help, best of luck with your project!
@daneagles3350
@daneagles3350 Месяц назад
After cleaning, I used to wipe down the surfaces with lemon Pledge, wipe off the excess and cover. The next time I used the boat I’d wipe off the dust that made it through the cover. This trick minimized the hard water spots, made clean up easier and made the gel coat pop. Love the channel, thanks for the great instruction!!
@FishBumpTV
@FishBumpTV Месяц назад
Great tip! I will have to try that. Thanks for watching!
@USMC0332
@USMC0332 16 дней назад
I just bought an older deck boat in SW Florida. When it cools down I'm going to do this! I'm here researching so I'm ready. I have to do the top side too. I'm not starting a project like that in June, but I'll collect what i need. Thanks!
@FishBumpTV
@FishBumpTV 11 дней назад
Awesome! I wish you the best with your deck boat project.
@1965RonnieP
@1965RonnieP 5 месяцев назад
Love your Videos Capt. I will be using all this excellent information. I plan on doin a mild restoration on a 26 ft striper I got as a nice end of the season sale back in September. I believe in doing everything thoroughly like you do. It is great to watch a true Craftsman they are getting more and more scarce as the years go by, lol I followed the whole build on your 29 footer. What a beast and an amazing project!! Thanks again for all your time and knowledge
@FishBumpTV
@FishBumpTV 5 месяцев назад
Thank you so much, glad you are enjoying the channel! Best of luck with your project.
@ronf.109
@ronf.109 7 месяцев назад
That's information every boat owner can use, thanks for the great instruction.
@FishBumpTV
@FishBumpTV 7 месяцев назад
Thank you Mr Ron! Appreciate the comment!
@Leblueskee
@Leblueskee 4 месяца назад
It's gotta be so cool getting a boat back in your shop that you built 20 years ago. I'm trying to get into boat building but I'll be the first in my family to do so.
@FishBumpTV
@FishBumpTV 4 месяца назад
Yes, it really is great to have one of your boats come back home! Man that is very cool! Best of luck on your boatbuilding journey, and thanks for watching!
@denislaouenan5553
@denislaouenan5553 3 месяца назад
Thank you Sir, clear and thorough instructions, really enjoy watching the whole process rather than giving instruction and skipping videoing phases as most channel do. I have been doing exactly like you describe, I have american blue hull the oxidation gets very visible, boat sits outside under canopy but the sun and the moon manage to create oxidation. I go 3M heavy, 3M finesse and colonite wax once every 12 months or so. When i got the boat I had to go 600 grit, most people say it marks the gelcoat too deep but it's not bad getting that back with 800 then 1200. the thing is to get ALL oxidation off at least once then the yearly maintenance is not so bad. It's not something one does every day so there is little moments of doubts in the process, thanks to your excellent video the doubts are lifted off. For the inside of the boat it is a bit more difficult due to the positioning of tools and body so sometime I just scrub with scotch pad (light duty) then wax. I've watched some of your other videos and really appreciate the genuine dedication you put in there. thank you Sir, wishing you and enterprise very well.
@FishBumpTV
@FishBumpTV 3 месяца назад
Thanks so much! I am glad you are enjoying the videos! Sounds like you have the wet sanding, compound and wax process dialed in. It can be a little work to get there, but it sure looks nice when you are done!
@Michael-nx7im
@Michael-nx7im 4 месяца назад
THANK YOU! I AM 84 LIKE TO FISH I ALSO WORK ON OLD BOATS . AL YOUR VIDEO'S, THIS ONE WAS ALSO GREAT. THANKS AGAIN. CENTRAL FL. EAST.
@FishBumpTV
@FishBumpTV 4 месяца назад
You are very welcome! Thanks so much for watching and commenting!
@melinda5777
@melinda5777 2 месяца назад
Great work here! The boat color is wonderful! ❤😊
@FishBumpTV
@FishBumpTV 2 месяца назад
Thank you very much! The owner was very happy with how it turned out. I appreciate you watching!
@dusty4208
@dusty4208 5 месяцев назад
Hands down the best video I’ve seen on gel coat restoring from oxidation
@FishBumpTV
@FishBumpTV 4 месяца назад
Wow, thanks so much!
@Rayzer1989
@Rayzer1989 4 месяца назад
I agree
@Artseventy6
@Artseventy6 3 месяца назад
Wow, what a great presentation! Thanks for posting this.
@FishBumpTV
@FishBumpTV 3 месяца назад
Thanks! Glad you enjoyed it!
@backcountrylifemagazine6912
@backcountrylifemagazine6912 7 месяцев назад
Been watching all your vids.. Really great!!! What a wealth of knowledge and instruction for anyone wanting to build and/or maintain boats. Thx!!
@FishBumpTV
@FishBumpTV 7 месяцев назад
Thanks so much! Glad the videos are helpful! Working on really growing the channel right now, so the views and comments help. We appreciate you watching!
@user-zb1pj9ov3b
@user-zb1pj9ov3b 4 месяца назад
Thanks for recommending this video, I learned a lot. Awesome job as always.
@FishBumpTV
@FishBumpTV 4 месяца назад
Glad it was helpful! Thanks for watching
@scottwilliamson495
@scottwilliamson495 3 месяца назад
This was fantastic video thank you please keep them coming
@FishBumpTV
@FishBumpTV 3 месяца назад
Thank you! Will do!
@tedfelsberg5322
@tedfelsberg5322 4 месяца назад
Beautiful ! Like night and day ! Thank you for another great video.
@FishBumpTV
@FishBumpTV 4 месяца назад
Thanks, glad you enjoyed it!
@papa_swig
@papa_swig 21 день назад
Great video. Thanks for taking the time to put it together!
@FishBumpTV
@FishBumpTV 21 день назад
Glad you enjoyed it! Thanks for watching and commenting!
@xxxnonamexxx5615
@xxxnonamexxx5615 3 месяца назад
You've quickly become my favorite boat channel. Great tip on the wax and waxing process. Thanks!
@FishBumpTV
@FishBumpTV 3 месяца назад
Wow, thanks! I appreciate that.
@woutzweers
@woutzweers 3 месяца назад
Mr Miyaki 😊 smiled when you mentioned that.
@FishBumpTV
@FishBumpTV 3 месяца назад
Haha, you got it! Thanks for watching
@user-qc3rc6qq9z
@user-qc3rc6qq9z 4 месяца назад
Capt. Joe, these are great videos. I have been restoring a 1977 24' Stamas Sport Cruiser. MerCruiser I/O 140hp, I've rebuilt both mains and outdrives and I'm on to cosmetics. Even though the boat has been stored on a lift it is heavily oxidized and your videos are very informative and easy to follow. Of course, when you take a task on like I have everyone has a preference of how to do things. A year or so ago I ran across BoatWorks today videos and they are good, like yourself the professional is very informative, and he uses Total Boat line of products, I bought everything he used. I tried a test spot, and it came out very good. My mechanic friend turned me on to Aqua Buff and showed me a Black boat before and after pics he got to a mirror shine. I was so impressed I got the Aqua Buff 1000 and 2000 because he said he didn't have to wet sand the oxidation. I ran the Aqua Buff 1000 to remove oxidation from one side of the boat it did ok but not great. Would you recommend a wet sand first? I have Mura 1000 and 2000 pads. Recently I saw some videos on Glidecoat ceramic coat, do you have any experience with this product, and what is your thoughts about ceramic coating. I just got glidecoat ceramic system in and was preparing to ceramic coat the boat vs wax. I ran into your channel while looking for different videos of gelcoat repair and I wish I would have found it first. I called Stamas to see if I could get a color match for the Stamas gelcoat and they referred me to Mini craft gelcoat. I ordered the gelcoat from Mini craft for the year model of the boat. Because I have some gouges and dings, I want to repair the imperfections. Like the keel of your bay boat, I have trailering scars on the keel as well and a gouge on the bow. I need to make a paste and saw a video that used west system 406 to make a gelcoat paste to repair the gouges. Have you tried this for a thickening agent? Mini craft sent me gelcoat with the wax additive already added to the gelcoat, can I make a paste with gelcoat that has wax in it? I have done fiberglass repairs before, but the wax additive was always added to the final coat of gelcoat. This is what I always did as a rule of thumb because I was told you cannot build wax on wax with gelcoat. Mini Craft also sent me Fast Piranha Patch Reducer and Super High Gloss Blending Additive. I have an idea of the High Gloss Blending Additive but what is the Fast Piranha Reducer for, and where in the process is it used? Wow! I'm sorry for loading you down with questions, but I really enjoyed watching your tutorials and will refer anyone who ask to your channel. Thank you for your time. If you come down to South Louisiana I'd love to show you around. Thanks Again
@FishBumpTV
@FishBumpTV 4 месяца назад
Glad you are enjoying the videos! On boats that are heavily oxidized, wet sanding is usually the way I go. I do not usually used waxed gel except for the last coat. You can sometimes add coats as the base is just starting to cure, or apply it and then sand it to remove the wax before adding more coats. Yes, the west additive can be used to thicken the gelcoat. I have used duratec high gloss clear additive in the past for thinning the gelcoat. It is a good product, but there are others on the market that do the same thing. We have more videos coming soon on some of the topics for you guys. I hope this helps, and best of luck with your project!
@DennisGarbo
@DennisGarbo Месяц назад
Just ran across your video. Very well done Answers many questions I had about doing my boat. Great video!!
@FishBumpTV
@FishBumpTV Месяц назад
Awesome! Thank you!
@chasefetrow9138
@chasefetrow9138 6 месяцев назад
Top notch video. Great work guys!
@FishBumpTV
@FishBumpTV 6 месяцев назад
Much appreciated! Thanks!
@SM-dv6wi
@SM-dv6wi 4 месяца назад
Great video! Got to see the finished boat!!!!!
@FishBumpTV
@FishBumpTV 4 месяца назад
Thanks!The final product is on the channel, you will just have to look through our video Shorts to see it. It turned out really nice. I appreciate you watching!
@everettmack5706
@everettmack5706 Месяц назад
Great tips. I’ve always used 3M perfect it line up. Those are great for bringing back old gel coat or keeping new gel coat shining.
@FishBumpTV
@FishBumpTV 29 дней назад
Glad it was helpful! Thanks for watching and commenting!
@markbuskens6070
@markbuskens6070 7 месяцев назад
Man that definitely looks like a new boat.That dark green really faded out bad but the sanding,buffing and waxing brought it back to life!
@FishBumpTV
@FishBumpTV 7 месяцев назад
Thanks brother! The gelcoat came back pretty nice.
@heirvon_558
@heirvon_558 Месяц назад
Very good content. I'm interested in restoring the top deck .Especially the bow. Some of it is textured. I imagine different tools for the textured gelcoat. Thanks in advance.
@roberthelgeson1294
@roberthelgeson1294 2 месяца назад
Wow great video. So helpful on actually showing the whole process and talking us through it so we understand. 👍
@FishBumpTV
@FishBumpTV 2 месяца назад
Glad you enjoyed it! Thanks for watching and commenting!
@jimvanhamlin3217
@jimvanhamlin3217 6 месяцев назад
Thank you for the introduction it really shine some light on what I got to do to mine
@FishBumpTV
@FishBumpTV 6 месяцев назад
You are very welcome! Glad to help!
@jimmypowell1283
@jimmypowell1283 25 дней назад
Nice detailed video thanks
@FishBumpTV
@FishBumpTV 25 дней назад
Glad it was helpful!Thanks for watching!
@timpuckett110
@timpuckett110 6 месяцев назад
I have a 42 foot Catamarn to do. This video really helps me understand how to do it. Thank you 🙏
@FishBumpTV
@FishBumpTV 6 месяцев назад
Glad it helped! Thanks for watching!
@traditionfishingcharters
@traditionfishingcharters 7 месяцев назад
Pretty Work Capt Joe!!!
@FishBumpTV
@FishBumpTV 7 месяцев назад
Thank You Sir! Appreciate you watching and commenting!
@nickn257
@nickn257 4 месяца назад
Great video. I’m going to try it on my Everglades 243. Thanks for sharing
@FishBumpTV
@FishBumpTV 4 месяца назад
Thanks, and best of luck with your project!
@TEXASHANDYMANSVCS
@TEXASHANDYMANSVCS 2 месяца назад
Great job 👍
@FishBumpTV
@FishBumpTV 2 месяца назад
Thank you, much appreciated!
@christopherchapman8893
@christopherchapman8893 Месяц назад
Great video and detailed explanation - Thank you!
@FishBumpTV
@FishBumpTV Месяц назад
You are welcome!
@D2O2
@D2O2 4 месяца назад
Love Presta Super Cut! Saves so much time.
@FishBumpTV
@FishBumpTV 4 месяца назад
I agree, it's good stuff! Thanks for watching and commenting!
@douglasbaum1846
@douglasbaum1846 5 месяцев назад
Considering buying my first bass boat. I have to go used because new is $$$$. I looked at a mid 90's Ranger today that needs s little work and tlc. This video shows very well how to do part of the job. Thank you very much for explaining it and showing what can be done for the finish of an old boat. Ps I subscribed
@FishBumpTV
@FishBumpTV 5 месяцев назад
Glad the videos are helpful! Best of luck, and welcome to the channel!
@Brian-mp2mv
@Brian-mp2mv 2 месяца назад
Something that helped me out tremendously when I DA'd my MasterCraft ProStar 190 white/red boat was getting some of that 1/4 inch poly tubing like you see for refrigerator ice makers, and a spigot valve with a 1/4 inch brass compression nipple coming off the side. (or some way to reduce the line down to 1/4 inch) Then adjusting the water flow to keep the hose flooding above my sandpaper. Used way less sandpaper, because I kept it flooded and cleaning the paper. (When I was a kid in the 70's, we used this type faucet for a water cooler line to an automatic float on the water cooler.) EDIT: Also, I removed decals and was fortunate to work with a printing shop where I cut my own decals
@FishBumpTV
@FishBumpTV 2 месяца назад
Thanks for the suggestion and for watching!
@juanenriquezmartinez6864
@juanenriquezmartinez6864 4 месяца назад
Many thanks for your video, I have Bavaria 30 cruiser sailing boat and now I know what to do.
@FishBumpTV
@FishBumpTV 4 месяца назад
Glad to help
@ericcope8216
@ericcope8216 18 дней назад
Great video, thx.
@FishBumpTV
@FishBumpTV 12 дней назад
Glad you liked it! Thanks for watching and commenting!
@JoseHernandez-kl2wg
@JoseHernandez-kl2wg 3 месяца назад
Great video that help me to restore my boat color.
@FishBumpTV
@FishBumpTV 3 месяца назад
Glad I could help! Thanks for watching and commenting
@user-cc7wv9kh9e
@user-cc7wv9kh9e 4 месяца назад
awesome video! Thank you
@FishBumpTV
@FishBumpTV 4 месяца назад
Glad to help, and thanks for watching!
@tonygravley1311
@tonygravley1311 6 месяцев назад
you are a great teacher! thank you so much! I am planning on using your steps for my Stratos 201 pro 1989
@FishBumpTV
@FishBumpTV 6 месяцев назад
Thanks! Glad to help! Best of luck with your project!
@danballou2202
@danballou2202 6 месяцев назад
I've been building surfboards since 1975 and was also an offshore sport fishing captain. Point is I know my way around fiberglass work. Your video's are excellent. And this is from someone who knows. I'm sure your videos are helping many folks. Great work!
@FishBumpTV
@FishBumpTV 6 месяцев назад
Wow, Thanks Capt! Glad you enjoyed the videos!
@aleksandrnikolajev6863
@aleksandrnikolajev6863 5 месяцев назад
By the way they DO! I really enjoy learning from them!
@FishBumpTV
@FishBumpTV 5 месяцев назад
@@aleksandrnikolajev6863 Thanks you much!
@JoseTavares-ns8en
@JoseTavares-ns8en Месяц назад
You Are Doing A great job
@FishBumpTV
@FishBumpTV Месяц назад
Thanks, I appreciate that!
@raycleaningsolutions
@raycleaningsolutions 5 месяцев назад
My favorite RU-vid channel
@FishBumpTV
@FishBumpTV 5 месяцев назад
Wow! Thank you so much!!
@johncollins5021
@johncollins5021 6 месяцев назад
That looks great. My boat is 43 foot sailboat. It takes more than a weekend.
@FishBumpTV
@FishBumpTV 6 месяцев назад
Yep, that's gonna take a minute!! Thanks for watching!
@justinnelson7639
@justinnelson7639 6 месяцев назад
Thank you for the info, great video
@FishBumpTV
@FishBumpTV 5 месяцев назад
Glad it was helpful! Thanks for watching and commenting!
@justinnelson7639
@justinnelson7639 5 месяцев назад
@@FishBumpTV i reverently was given a boat, it needs alot, mostly it just floats at the moment. I ordered hull cleaners, polish and wax, then started to clean. Some oxidation did get removed but the color i believe it not what it should be. Of i may sent you some photos and additional information, i would like to, before i try to finish the polish and apply the wax. I believe you could simply answer me concerns. Are you open to the idea?
@turnandburnroadtripssouthe8432
@turnandburnroadtripssouthe8432 7 месяцев назад
Excellent explanation
@FishBumpTV
@FishBumpTV 7 месяцев назад
Glad you liked it! Thanks for watching and commenting!
@stualand
@stualand 3 месяца назад
Thanks captain great video!
@FishBumpTV
@FishBumpTV 3 месяца назад
No problem 👍thanks for watching!
@jamesparker6017
@jamesparker6017 Месяц назад
Coral Gables 🌴🇺🇸 Enjoyed the video. Iam redoing my classic 19ft Donzi Hornet 🐝 ! 🏄
@FishBumpTV
@FishBumpTV 29 дней назад
Outstanding! Thanks for watching and commenting!
@phxbro1
@phxbro1 6 месяцев назад
For rv,s with oxidation on gel coat we have used a moderately stiff wash brush on a poll and mix dish soap, cleanser and yellow awesome ( from dollar store) in a 5 gallon bucket . First wet maybe 6 foot area and wash/scrub with moderate amount of pressure then rinse before it dries. Then rub hand over surface to see if all oxidation is gone and then spray a coat of clear , same that goes on a car . Often after wash/scrub the rv looks so good that you think it doesn't need the clear coat. We're in Phoenix and it gets super hot and no shade or building to work in . We don't buff with machine because it always shows buff swirl marks and only lasts 3 to 6 months then it needs it again. When spraying the clear it shines like new and no more buffing and waxing again and again. The rvs we do are for sale for dealers so after the job we don't see it again, so far everyone is happy. We do the same for aluminum and metal surfaces.
@FishBumpTV
@FishBumpTV 6 месяцев назад
Thanks for watching! The standard on boats is the wet sand and polish like we did. Sounds like what you guys do works really good on RVs. I appreciate your comment!
@Armydude2017
@Armydude2017 6 месяцев назад
please dont ever clear coat a boat. the 1994 skeeter i am restoring was cleared from the factory. it WILL start to flake over time. so far, the only way i have found to remove it and get back to gel. is a razor blade scraper. and its a long, tedious and painful process.
3 месяца назад
HAVE 2 BOATS, ONE IS A 20FT. PROLINE CENTER CONSOLE FOR MY FISHING OTHER IS A 1996 21FT. SEARAY SIGNATURE 5.7 THATS FOR MY OLDER KIDS TUBING, THATS THE ONE I'M FOLLOWING YOUR STEPS ON WAXING, BURGUNDY AND WHITE WITH LIGHT OXIDATION, DETAILER WANTS 400.00 SO I'M DOING MYSELF. THANKS FOR THE VIDEO!
@FishBumpTV
@FishBumpTV 3 месяца назад
Thanks for watching and best of luck with your project!
@dannylayton1106
@dannylayton1106 3 месяца назад
OK Captain,you have shown this is an art of a lifetime of dedication. The buck stops here. So I am trying to understand if ceramic coating is a wise consideration or not to retard the oxidation. Some ceramic coating manufacturers void their products once they know it's for a boat or there are other issues with application. We have outdoor toys and tow vehicles that we keep garaged to stop oxidation but really want your take on wax or ceramic coating for the long haul. Subscribed and really enjoy the love shown to caring for the equipment.
@FishBumpTV
@FishBumpTV 3 месяца назад
Wow, thanks! And welcome to the channel! We have always been a fan of the fleetwax. I may have to look into the other products and put together a video for you guys!
@1957cajun
@1957cajun 7 месяцев назад
Love it! Thanks for all the tips! I’d really like to see you do the same thing for the nonskid deck. I have cleaned and compounded mine to get all the stains and dirt off but I can’t seem to get it to repel all that dirt and stains. I’ve used several different types of liquid waxes and they just don’t seem to really seal the deck.
@FishBumpTV
@FishBumpTV 7 месяцев назад
Thanks for watching! I will try to make a non skid specific video to cover that. You might want to try cleaning the non skid with a bristle brush and dawn soap after compounding. That will remove any compound residue left in the gelcoat pores. Then follow up with a high quality paste wax. Hope that helps. Appreciate your comment!
@1957cajun
@1957cajun 7 месяцев назад
@@FishBumpTV Thanks for that! I did not do that. I did use a compound with a bristle brush on a machine but I did not wash that off the way you suggested. I also didn’t use a paste wax. This is what I’ll do next time.
@crawford323
@crawford323 6 месяцев назад
What about weathered and cracked fiberglass surfaces. My old boat looks like Mona Lisa cracks on the topsides. How does one approach this kind of repair And restoring. When I say restoration, I don't mean to showroom floor shine quality. Sand, fill the cracks with something and repaint with what? This boat is 40 plus years old and was passed around by family and friends who learned how to sail with her and it was a beater learning boat and abused. Now it up to me to keep her from further decline. How do you approach this kind of deterioration and repair?
@crawford323
@crawford323 6 месяцев назад
What filters and treatment does your compressed air have? Oil and water removal? Discuss this if you would.
@crawford323
@crawford323 6 месяцев назад
Explain the term "Cutting" in reference to what you are doing.
@2ndbar
@2ndbar 2 месяца назад
Looks great.
@FishBumpTV
@FishBumpTV 2 месяца назад
Thanks!
@jamesrose7657
@jamesrose7657 2 месяца назад
Man, what a video. You did an amazing job at covering step by step. I have 1 question, I have some yellowing on the top rails of my boat, will this eliminate that as well?
@FishBumpTV
@FishBumpTV 2 месяца назад
Thank you very much! It should help with the yellowing, but hard to say for sure. Nothing wrong with testing a small area and seeing how it goes. Hope this helps and best of luck with your project!
@thebeastman1651
@thebeastman1651 Месяц назад
What a great video! Finally a video that really explaines every step in stead of the useless videos. I have a darkblue gelcoat from 2004. I want to do the whole hull. I have a tiny chip that is missing from the gelcoat, it is through the gellcoat untill the underlayer. Do you have a tip how I can plaster/repair this spot. Like some blue liquid gellcoat repairpaste? Greetings from the Netherlands
@FishBumpTV
@FishBumpTV Месяц назад
Glad you enjoyed the video, and thanks for watching all the way from the Netherlands 🇳🇱! Yes, chips or dings in your gelcoat are a common problem and can certainly be repaired. I do have several videos here on the channel on that topic and I also have a gelcoat color matching video. There are companies that sell gelcoat repair kits here in the U.S. One of the more popular brands is made by a company called Evercoat. I show the kit, and how to use it in my gelcoat color match video. You may want to go to our channels home page, and just scroll through a bit. I am sure you will find some more helpful videos!
@andreimarius9695
@andreimarius9695 29 дней назад
You're as pro as possible, great lesson, thanks for this video. I'm actually about to buy a boat that seems like heavy oxidation. Until seeing your video, I thought that the said boat needs a full regelcoat job. Btw. how long that wax is going to hold in salt water? Wondering how often should I wax the boat ! I'm totally new on the subject, so that's my excuse if I asked some nub question.
@FishBumpTV
@FishBumpTV 27 дней назад
Thanks so much! I usually recommend waxing at least once a year, but twice wouldn't hurt. It is also helpful if you can keep the boat covered or sheltered from sunlight when it is in storage. Hope this helps!
@poponthedock9667
@poponthedock9667 6 месяцев назад
Thanks for the information
@FishBumpTV
@FishBumpTV 6 месяцев назад
My pleasure, Thanks for watching!
@tomogletree1
@tomogletree1 7 месяцев назад
Great video
@FishBumpTV
@FishBumpTV 7 месяцев назад
Thanks! Glad you enjoyed it!
@spacerm3178
@spacerm3178 3 месяца назад
Awesome stuff- thanks for taking the time to explain your process fully. I can't seem to find the soft sanding pads you use on the air tool- can you add a link or product info?
@FishBumpTV
@FishBumpTV 3 месяца назад
Thanks! I will try to add them to the links, they are made by 3m if that helps at all. I appreciate you watching and commenting
@JimmyJammer1
@JimmyJammer1 5 месяцев назад
Hey dude, you are a total badass!!! Really enjoyed a few of your videos. Thanks for your expertise….. peace….. jimmy
@FishBumpTV
@FishBumpTV 5 месяцев назад
Haha! Thanks man! Glad to help
@Skankster87
@Skankster87 27 дней назад
This has been super helpful, great video! I do have a couple questions: 1) you said don't do this in the sun, what about the heat? It's summer in Phoenix which means the low is 88 degrees, and heats up really quickly? I'd prefer to do the resurface in the winter/spring but I've got a big trip coming up and I'd like to restore the boat. 2) Any recommendations on corners, edges, angles, or tight surfaces surrounded by 3d letters? So far I've just used small attachments on my drill that can reach smaller spaces. Thanks!!!
@DJCARLITOSHN
@DJCARLITOSHN 3 месяца назад
Love your videos man!! Do you happen to have a video about wiring/re-wiring your boat? I'm planning on doing it but I need more knowledge about it. Thank you!
@FishBumpTV
@FishBumpTV 3 месяца назад
Thanks! Episode 24 in our boatbuilding series touches on wiring, but it is not a in depth tutorial. I hope to do a video in the future on that for everyone. I appreciate you watching!
@davidcox7378
@davidcox7378 2 месяца назад
Like the videos , good techniques to use on my boat. I have a question about removing a brushed on paint job and getting it back to the original gel coat..it's very rough and not very smooth. Boat has set outside for 23 years Boat is a 1973 17ft. Boston Whaler.
@FishBumpTV
@FishBumpTV 2 месяца назад
Thanks for watching! That's a process that would need a detailed video to fully explain. I will try to make a video on that process as soon as I can.
@thegeneraljoe67
@thegeneraljoe67 5 месяцев назад
Nice instructional video! I want to ask if you have ever considered using any newer ceramic , or graphine type coating products for your last stage, instead of using traditional wax ?? Also , I wanted to mention something i found interesting. > I watched a well known local detailing Company use that product called "wipe new" on several boat gelcoats for the final stage of protection instead of traditional wax. They buy it in gallons , claiming its phenomenal & lasts much longer. I personally would be hesitant applying that "wipe new" bcus it's very difficult to remove if theres any issues. Kindly reply if you have a moment. THANX very much
@FishBumpTV
@FishBumpTV 5 месяцев назад
No, I haven't tried any of those products. But I would consider it in the future. Thanks for the suggestion!
@primate2744
@primate2744 21 день назад
Awesome video! Thank you! Any chance you could do a video on bottom paint removal? Thinking I'll go the stripper, sand and buff route but I'd be curious to see your professional opinion.
@FishBumpTV
@FishBumpTV 21 день назад
Thanks! Glad you enjoyed it. We don't do much bottom paint Removal, but your plan sounds pretty solid. Maybe to a little testing in a hard to see location before you go all in. I hope this helps and thanks for watching!
@primate2744
@primate2744 20 дней назад
I appreciate the response. I supposed I was hoping for a miracle approach that I hadn't seen yet to make my job easier. lol
@BobSmith-my7sg
@BobSmith-my7sg 10 дней назад
Thank you for the detailed video. It was very informative. I have a question for you. I have a 15 year old Glastron bow rider that was getting oxidized and ugly. When I used McGuire's 49 Oxidation Remover Heavy Duty Cleaner on with a Makita polisher, the back end of the hull started to turn pink with very little polishing. The boat was not sanded. I stopped polishing as soon as the pink started to appear. Can you tell me what the pink material is? What should my next step be? Thanks in advance for your advice.
@maze400
@maze400 Месяц назад
FANTASTIC AND INFORMATIVE.... I just bought some FIBRE GLASS-EVERCOAT CO Gel Coat Scratch Patch (for a small chip in my kayak's gelcoat. And also picked up Meguiar's M6332 Flagship Premium Marine Wax. After watching this I will add the soapy water spray bottle to the process. Any advice?
@FishBumpTV
@FishBumpTV Месяц назад
Sounds great! I have several other gelcoat repair and maintenance videos on the channel that together should really help you get a complete picture of the process. Just take your time, and follow the steps. With a little practice and patience most people catch right on. Thanks for watching and best wishes with your project!
@user-mv3sr8zq2t
@user-mv3sr8zq2t 5 месяцев назад
Amazing
@FishBumpTV
@FishBumpTV 5 месяцев назад
Thank you much!
@RussellB
@RussellB 2 месяца назад
bro you are a lifesaver
@FishBumpTV
@FishBumpTV 2 месяца назад
Glad to help! Thanks for watching!
@TriCSyndicate
@TriCSyndicate 2 месяца назад
Excellent how to video. Question: With a smaller boat (17' skiff) should I do this in small sections or just do a whole side at a time?
@FishBumpTV
@FishBumpTV 2 месяца назад
Thanks, you can do a whole side at once if you like. I just did a small section in the video to show the contrast between old and new. I hope this helps and I appreciate you watching!
@jeremyherrin29
@jeremyherrin29 7 месяцев назад
Awesome instructional video, was the logo gelcoated in when built?
@FishBumpTV
@FishBumpTV 7 месяцев назад
Thanks! No, it is just a low profile decal and we used light pressure on the compounding wheel. Appreciate you watching and commenting!
@PerryShriver
@PerryShriver 4 месяца назад
good stuff.👍👍👍👍
@FishBumpTV
@FishBumpTV 4 месяца назад
Thanks!
@billhartsfield424
@billhartsfield424 6 месяцев назад
Two thoughts, first, be careful on edges and ridges, easy to burn thru the gel coat. Second, Meguirs #10 is a liquid wax seal that will seal and give you a wet look much easier and better than any other wax I have ever found. You can rub it on dead gel coat and make it shine. Very easy to apply and wipe off.
@FishBumpTV
@FishBumpTV 6 месяцев назад
Thanks for the suggestions! I appreciate you watching!
@warrenthomas1253
@warrenthomas1253 6 месяцев назад
​@@FishBumpTVI understand you always want to seem open to everyone's opinion. First off the Fleetwood wax is the preferred wax by most professional yacht detailers. And if you don't compound a heavily oxidized get coat surface and just apply a wax, it might seem like it worked and oxidation was gone but when you wake up the next day and it's back but under a shiny wax surface now. You in for a full day of fun fixing your short cut. There is no short cuts to professional grade finishes in a boat yard. And it's why a lot of time people doing dyi projects on their boat ends up on my job list costing twice as much than if they just gave the work to the boat yard in the first place. I always make sure the price tag for dyi projects gone wrong are double the original price to remind them why we show up every morning. Making sure every time they leave the dock and go offshore their boat is in peak condition
@jimfowler9143
@jimfowler9143 3 месяца назад
Thx for the video tutorial...really good Thx!! Can I ask... what do you think of the uv sealant products vs was? I had switched and tried based on a recommendation but now wondering if the wax protects better?
@FishBumpTV
@FishBumpTV 3 месяца назад
Glad you are enjoying the vids! I have always been a wax kind of guy, but I am sure there are some other great products out there. Thanks for watching!
@mattmarsch7882
@mattmarsch7882 5 дней назад
Great video! How come the space between the lettering looks as good as the field even though it wasn’t wet sanded?
4 месяца назад
Your videos are the best ones I have seen on RU-vid! I have just bought a Dehler 25CR from 1996 and I would like to restore the deck gelcoat. I will try to apply your recommendation, but I’m wondering how it can be done for the parts which have a surface that is a non-slip texture? Kind regards from Spain.
@FishBumpTV
@FishBumpTV 4 месяца назад
Thanks for watching all the way from Spain 🇪🇸! Glad you are enjoying the videos. When working around nonskid we usually skip the wetsanded phase of the process on the nonskid. We usually use the heavy cutting compound for the nonskid and sometimes just use the compound on a small towel to work the material deep into the grooves by hand. Depending on the depth and texture of the nonskid, a buffer can still work just fine. You may have to just experiment a little with a area to see what works best for your boat. Hope this helps and best of luck with your project!
4 месяца назад
@@FishBumpTV Thank you so much!
@62heliman
@62heliman 2 месяца назад
Looks awesome finish to me...
@FishBumpTV
@FishBumpTV 2 месяца назад
Thank you very much!
@MichaelPinkerton-id9xn
@MichaelPinkerton-id9xn 2 месяца назад
Love this video. I looked at the Hutchins DA, do you recommend the 3/16or3/32 offset?
@FishBumpTV
@FishBumpTV 2 месяца назад
Glad you enjoyed the video! 3/16 offset is a more aggressive action and is better for heavier sanding. 3/32 is a finer action and better for polishing and wet sanding. I hope this helps and thanks for watching!
@wallacegrommet9343
@wallacegrommet9343 4 месяца назад
Dark color gelcoat is so much work to keep free from fading and oxidation.
@ontimespiva
@ontimespiva 3 месяца назад
Love the videos! Would like to see how to do a color change of gel coat. What exactly needs to be done to go over with a different color gel coat of your boat had say red and you wanted to change to blue? Thanks!
@ontimespiva
@ontimespiva 3 месяца назад
Also, if you’re sanding off some material, does it remove the top wax layer ??
Далее
skibidi toilet 76 (part 2)
04:28
Просмотров 15 млн
How To Re-Gel Coat A Boat - DIY Cheapest & Easiest
36:50
Gelcoat Damage & Crack Repair
4:43
Просмотров 14 тыс.
3 Hacks for Rotary Polishing!
10:14
Просмотров 212 тыс.
The Secrets of GELCOAT and WHAT You Need to Know!
24:07
How to Apply Gelcoat -Part one-
6:59
Просмотров 270 тыс.
Most Common Mistakes Working With Fiberglass!
29:56
Просмотров 742 тыс.
Don´t WASTE FOOD pt.2 🍕
0:19
Просмотров 17 млн
Lady Plays Hide and Seek with Her Dog
0:23
Просмотров 26 млн
One moment can change your life ✨🔄
0:32
Просмотров 30 млн