How to pour interlocking concrete blocks | Block Moulds 

Dank je wel!

It really depends on the block size. For instance, 120x60x60cm block weights 1037kg and 160x80x80cm block 2458kg. Luckily, we also provide lifting equipment to easily handle such weights 💪

I would say hire me but I am in nz an I change this on my own, being changing this on my own for 7 years 🤙🤙🤙 tell them harden up

Great strides in robotics. Might want to investigate for that purpose. Well worth the investment as it would work 24 hours a day without back problems.

Sure! We sell wide range of sizes, our smallest one has 120 x 30 x 30 cm.

It´s made of steel, corners are hot-dip galvanized. We also use (one of) the thickest materials on the market to make it durable 💪

Hello! We currently sell these sizes, although our product range is still expanding. 120 x 30 x 30 120 x 30 x 60 120 x 60 x 30 120 x 60 x 60 150 x 30 x 30 150 x 30 x 60 150 x 60 x 30 150 x 60 x 60 160 x 40 x 40 160 x 40 x 80 160 x 80 x 40 160 x 80 x 80 180 x 30 x 30 180 x 30 x 60 180 x 60 x 30 180 x 60 x 60 240 x 30 x 30 240 x 30 x 60 240 x 60 x 30 240 x 60 x 60

No need those blocks are 2 foot by 4 foot , if your going to build a house on top , you could put in a cage but these are retaining wall blocks.

No rebar. Can be easily recycled again when damaged.

blockmoulds.com

Majid Almualla 20mm stone 2 1/2 buckets, coarse sand 2 1/2 bucket , 1 bucket of cement. That’s about 25mpa . So 5 to 1 ratio .Water will determine the strength start of with half the volume of cement used then adjust , don’t go to wet . Heaps of different scenarios but this is a start. Good luck.

Is this easy work?