New Video Mastering DMX: Lighting 348 chanel ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html 😍 How to control the DMX512 Wireless for DJ Lighting ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pCTTaHa00u8.html
This explain is NOT simple. I came back here after I understood this machine and still think you give confusing messages. I do not recommend this video for explaining this dmx controller.
I'm sorry to hear that you found the explanation confusing. For a detailed demonstration, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
Haha, I get it! DMX programming can be a bit tricky at first. If you ever decide to give it another try, our new video 'Mastering DMX: The Beginner's Guide to Lighting Control' might make it easier. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
No problem! Make sure your lights and controller are set to the same DMX address. Start by setting the DMX address on each light to A001. Then, ensure your controller is on and try adjusting the faders. If the lights still don't respond, check that your DMX cables are securely connected and not damaged. For a step-by-step setup guide, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
Your moving way to fast for a beginner to understand. I appreciate it but you have to explain again the fixtures 1 and 17 you were saying something about a rookie mistake but never demonstrated how to program these fixtures
Thanks for the feedback! I apologize for moving too quickly. For a detailed demonstration, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
I'm glad to hear you found the video helpful! To delete chases and scenes, you typically need to go into the edit mode of your DMX controller, select the chase or scene you want to delete, For a more detailed guide, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
Thanks, just got my own board (same as yours) and using it with a 3W RGB scanning laser that seem to have DMX-E (6ch) and DMX (34ch).. are there any of the DMX channels that control brightness (power) so you can dim it down a nudge.?
Congrats on getting your new board! For your 3W RGB scanning laser, you can usually find the channel assignments in the laser's manual. Typically, one of the channels should control the master dimmer or brightness. It varies by model, but it's often within the first few channels. If you need more detailed guidance, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
If the CO-Z 192 DMX 512 Stage DJ Light Controller Lighting Mixer Board Console has a "MIDI" button but no physical MIDI input, it's possible that this button is simply used to toggle MIDI control on or off. However, if you want to use MIDI to control the lighting controller, you will need to connect a MIDI interface to the controller's DMX input. Here are the general steps to set up MIDI control: Connect a MIDI interface to your computer or MIDI device. Connect the MIDI interface's MIDI output to the lighting controller's DMX input using a MIDI-to-DMX adapter cable. Configure your MIDI software or device to send MIDI data to the lighting controller. This may involve selecting the correct MIDI channel and setting up MIDI mappings to control specific DMX channels. Use your MIDI device or software to send MIDI data to the lighting controller, which will then translate it into DMX signals to control the lights. It's worth noting that not all lighting controllers support MIDI control, so be sure to check the user manual for your specific controller to determine if this is an option. If your controller does not have a physical MIDI input, you may need to use a DMX-to-MIDI interface instead. I hope this helps, and please let me know if you have any further questions!
You're welcome! I'm glad to hear that the video made it easier for you to set up your DMX 512 board and lights. If you're looking to learn even more, I recommend checking out our new video 'Mastering DMX: The Beginner's Guide to Lighting Control'. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
One question I have is can you change the faders to specific addresses on the light, for instance, if Im using a light that has RGBAW, BLacklight, Strobe, and other effects, can I not just cut it off right after RGBAW, and only use the 5 DMX channels / faders? Basically turning the 6th fader to begin the next light at its R space? Hope that makes sense.
Depends on the fixtures. Most newer fixtures have different modes. My Pars have a 5 channel or 11 channel modes, for example. You can select which mode you want the light to run.
I understand your question! Unfortunately, most DMX controllers, including the CO-Z 192 DMX 512 Stage controller, don't allow you to reassign faders to specific channels in a custom order. DMX operates on a continuous channel assignment, meaning you can't skip channels or reassign them arbitrarily. Each light will use its designated channels consecutively. If your light uses RGBAW on channels 1-5, you'll need to use channels 6-10 for the next light, rather than starting the next light at channel 6. For more detailed guidance on optimizing your DMX setup, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
Hello!I have a DMX 512 and i try to use Tapsync (tap 2 or 3...or 10 times!) but its not working...btw i have a programm copied to chase and i pressed Auto before to use Tapsync but still not workimg.Only works as a Display.Can you help me or its a console ptoblem?
Hello @sagedc1! It sounds like you're having some trouble getting the TapSync function to work with your DMX 512 console. Here are a few things you might want to check: Program Settings: Make sure that the program you're using is properly configured for TapSync. Some consoles require specific settings or steps for TapSync to work correctly. Double-check the manual to ensure you're following the correct sequence. Auto Mode: Since you mentioned pressing Auto before using TapSync, verify that the console is not locked into a mode that overrides manual inputs. Sometimes, Auto Mode can conflict with TapSync if it's still active. Timing of Taps: TapSync relies on the timing of your taps to set the tempo. If your taps are too inconsistent or too fast/slow, the console might not register them correctly. Try tapping at a steady, moderate pace. Good luck! And if you haven't already, be sure to subscribe and hit the notification bell for more tips and tricks! 🔔🎛️
How can you fade in and out scenes one at a time? (Using this lighting desk in a theatre context) I have 3 scenes programmed and would like to fade them out at the end of a scene. I don't need any chases. How would I do this?
Great question! To fade in and out scenes one at a time on your CO-Z 192 DMX 512 Stage controller, you can use the fader controls for each scene. Set the fade time for each scene using the appropriate fader, and then manually adjust the fader to transition smoothly between scenes. For a more detailed guide on scene management, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
nice. i just buy dmx 512, moving head and this is my first lesson. all i want to ask was how to connected to Not moving head (PAR LED)and controlled together? thanks.
Hi @edwinubod0405! Here's a step-by-step guide on how to connect and control both moving heads and non-moving heads with your DMX 512 controller: Set Up Your DMX Chain: Connect your DMX controller to the first light (moving head) using a DMX cable. From the first light, connect another DMX cable to the next light in the chain (non-moving head). Continue this daisy-chain setup until all lights are connected. Assign DMX Addresses: Give each light a unique DMX address. For example, set the moving head to start at address 1 and the non-moving head to start at address 10. Configure Your Controller: On your DMX controller, select the corresponding addresses for each light. Use the faders/sliders to control the different attributes of each light (e.g., pan, tilt for moving heads, and brightness, color for non-moving heads). Programming Scenes: Program scenes that include both moving and non-moving heads. Adjust the settings for each light and save them as a scene. Create sequences if you want a dynamic light show that includes both types of lights. If you have any more questions or need further assistance, feel free to ask! Don't forget to subscribe and hit the notification bell for more tutorials and updates. 😊🔔
I get he put one light channel 1 to scanner one and the other light to scanner two on channel 17 but he didn't show how to program it. The first thing you do and everybody skips it. Just found out why I can't figure anything out on my controller , there's a switch on the back that's not in the manual
Hi @biglovesam! Sorry for the confusion. Here's a step-by-step guide to help you program your DMX controller 512: Check the Switch: Ensure the switch on the back of the controller is in the correct position. This switch might toggle between different modes or features. Set DMX Addresses: Light 1: Set to channel 1. Light 2: Set to channel 17. Programming the Controller: Select Fixture: On your controller, select the fixture or scanner corresponding to the light (e.g., scanner one for channel 1). Adjust Settings: Use the sliders to adjust settings like brightness, color, and movement. Save Settings: Save these settings as a scene or preset on the controller. Create a Light Show: Combine Scenes: Create sequences by combining multiple scenes. Playback: Play the sequence to see your programmed light show. For more detailed help, let me know the model of your controller, and I can provide more specific instructions. Don't forget to subscribe and hit the notification bell for more tutorials and updates. 😊🔔
I'm glad you found the video useful! If you're looking for more tips and in-depth guidance, I recommend checking out our new video 'Mastering DMX: The Beginner's Guide to Lighting Control'. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
You're welcome! I'm glad you found it helpful. For more tips and guidance, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
Oh, Bono, you cheeky prankster! 🤣 While I've got my disco ball ready, I'll have to pass on the world tour. But, if you ever need some stellar lighting for a karaoke night, you know who to call! 🎤✨😉"
Thank you so much for subscribing and for your kind words! Welcome to the community from Western Australia! 🇦🇺 If you have any suggestions or questions, feel free to share. Enjoy the content! 👍🏻I recommend checking out our new video 'Mastering DMX: The Beginner's Guide to Lighting Control'.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
To set all 4 mini LED spots to the same address (A001), you need to manually adjust the DMX address on the fourth spot. Usually, this is done through the menu on the light itself. Navigate to the DMX address settings and change the address from A006 to A001. This will ensure all your lights respond to the same DMX signal. For more detailed instructions, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
I'm glad to hear you found the video helpful! , check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
Hi @Lavanloga89! Thanks for your feedback. If you have any specific questions about programming the DMX controller 512, feel free to ask! I'm here to help.
Thank you for your feedback! We're glad you enjoyed the demo. We appreciate your input about the background music and will work on adjusting it in future videos to ensure it's not distracting. Your feedback helps us improve! If you need more detailed guidance, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
If the LED lights still do not turn on even when the first slider is up all the way, it's possible that the DMX address for the lights is incorrect. This could cause the controller to send signals to the wrong address, resulting in the lights not turning on or t's possible that the first slider on your DMX 512 Stage DJ Light Controller is controlling the master dimmer for the lights, which means that the lights won't turn on unless the slider is up all the way. To check if this is the case, try lowering the first slider slightly and see if the lights turn off or become dimmer. If this happens, then the first slider is indeed controlling the master dimmer. You can try adjusting the other sliders to control the brightness of each individual light. make sure that the DMX address for the lights is set correctly. This can typically be adjusted using the controller's menu or settings. I
To adjust the light intensity in automatic mode on your CO-Z 192 DMX 512 Stage controller, you'll typically need to access the settings menu on your lights. Look for a setting that allows you to modify the intensity or brightness. Some lights have built-in dimming functions that you can control through their onboard menu. Additionally, if your lights have a "master dimmer" channel in DMX mode, you can adjust this channel to control the overall intensity even when in automatic mode. For more detailed guidance, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
You're welcome! I'm glad you found it helpful. For more tips and guidance, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
Yes, if you turn your DMX 512 controller to Auto mode, it can still respond to music, but this depends on the specific features of your controller and how it's set up. Here’s how it typically works: Auto Mode: When in Auto mode, the controller will run pre-programmed sequences or scenes automatically, based on the settings you've configured. It will cycle through these scenes without any manual input. Sound-Activated Mode: Some DMX controllers have a sound-activated mode that can be combined with Auto mode. In this mode, the controller listens to the music (usually through an internal or external microphone) and syncs the light effects to the beat. If your controller supports this, you can enable both Auto and Sound-Activated modes simultaneously, so the lights will respond to music while still following the automatic sequence. Check Your Settings: Make sure that the sound activation feature is turned on if you want the lights to sync with the music. This setting is often separate from the standard Auto mode and might need to be enabled manually. If you want the lights to sync specifically to music, ensure that sound activation is active, even when in Auto mode. If you're having issues, check the user manual for specific instructions on how these modes interact on your particular DMX controller. And if you’re enjoying these tips, don’t forget to subscribe and hit the notification bell for more! 🔔🎛️
Thank you for your kind words! I'm glad you found the video helpful. If you're interested in learning more, check out our new video 'Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
To use the music mode on a DMX 512 controller, start by ensuring your DMX lights are compatible with sound-activated mode. Connect your DMX lights to the controller as usual. Then, look for the music or sound-activated mode button on the controller; it might be labeled as "Music," "Sound," or something similar. Activate this mode, and the lights should start responding to the beat of the music. Make sure the microphone sensitivity on the controller is properly adjusted so it can pick up the sound accurately. If you haven't subscribed yet, make sure to do so and hit the notification bell to stay updated with our latest videos. Thanks for your question!
I'm glad to hear that you love it! Using both an analog and a semi-digital console can offer great flexibility. For detailed guidance on how to use both effectively, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
In the context of the CO-Z 192 DMX 512 Stage DJ Light Controller Lighting Mixer Board Console, a "chase" is a sequence of lighting effects that are programmed to play in a specific order. A "scene" refers to a specific lighting setup that is saved in the controller's memory for quick recall later. To exit a chase or scene, you can simply select a different chase or scene using the controller's interface. Most controllers have dedicated buttons or knobs for selecting different chases and scenes, so you can easily switch between them during a performance. Alternatively, you can stop the current chase or scene by pressing the "Stop" button on the controller. This will stop the current sequence of lighting effects and return the lights to their default state. It's important to note that different controllers may have slightly different methods for exiting chases and scenes, so be sure to consult the user manual for your specific controller for more detailed instructions.
But why did you say fixture 17 doesn’t go to 2 and I don’t understand how your are programming addresses. Your accent makes it very hard to understand man. You have to talk way slower
I apologize for the confusion. Let's break it down step-by-step: Select Fixture: On your DMX controller, you have buttons labeled "Fixture 1", "Fixture 2", etc. Set DMX Address: Each fixture (light) needs a unique DMX address. Fixture 1 should be set to address A001. Fixture 2 should be set to address A017 (if each fixture uses 16 channels). If your fixtures use fewer channels, adjust the addresses accordingly. I'll make sure to speak slower and clearer in future videos. For more detailed guidance, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
heck out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
I'm sorry to hear that the explanation of chases wasn't helpful. Let's simplify it: Select a Chase: Press the "CHASE" button and choose a chase number. Record Scenes: Press "RECORD", then select the scenes you want in the chase one by one, pressing the chase button each time. Set Speed: Adjust the speed fader to control how fast the scenes change. For a more detailed, step-by-step guide, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
You're welcome! If you have any more questions or need further guidance, feel free to ask. Also, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control for more tips and insights. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
For a more detailed guide on scene management, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
Thank you! I'm glad you enjoyed the demonstration. If you're looking to learn even more, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
Thank you for your kind words! We're thrilled to hear that our tutorials have been helpful over the years and that you've successfully programmed your DMX. If you want to continue improving your skills, I recommend checking out our new video 'Mastering DMX: The Beginner's Guide to Lighting Control'. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
You're welcome! I'm glad I could help. If you have any more questions or want to learn more, be sure to check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
Thank you so much! I'm glad you found the video helpful. If you're interested in more tips and in-depth guidance, check out our new video Mastering DMX: The Beginner's Guide to Lighting Control. I'll add the link soon! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hor9AU_ErBk.html
