No video :(

How to Program Key Fob RAM Dodge JEEP Alfaobd

Подписаться 181 тыс.

Просмотров 89 тыс.

50% 1

How to Program Key Fob RAM Dodge JEEP Alfaobd we show how we programmed a brand new key fob on this dodge ram 1500 pickup truck using alfaobd program
Click HERE for Highline Key fob for RAM
amzn.to/3SV3C53
Click HERE for Dodge Charger Challenger Key Fobs
amzn.to/3Db1tfu
Click Here for OBD Link MX +
amzn.to/3zkwfl4
Click Here for the AlfaOBD program
amzn.to/3SHWaKh
*Checkout other cool products Boosted Motorsports has tested and recommends HERE* 👇
www.amazon.com/shop/boostedmo...
Support BoostedMotorsports by JOINING Today! / @boostedmotorsports
For transmission & Driveline parts check out
WIT - Whatever It Takes Transmission Parts
Contact Clint (937) 262-7452
Mention Boosted Motorsports and save 20%
www.wittrans.com/
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#dodge #mopar

Опубликовано:

8 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 146

@RobRoyse 11 месяцев назад

I just wanted to say thank you for sharing this video. I was able to successfully program 2 new keyfobs from Amazon for my 3500. My local Ace Hardware wanted $281 for ONE of them, and I shudder to think what the Stealership would have charged. I didn't even spend $100 on both, and that included going to home depot to get the metal keys cut. Thanks again!

@tez64131 8 месяцев назад

Dealership quoted me $450

@cjwyhs9601 Год назад

Man, I love AlfaOBD. Comes in so handy with my Mopars. I wish someone would come up with something similar for newer GM vehicles.

@Demonpk-lb4gh Год назад

I'm so happy that yours worked. Bought a pair off of marketplace spend $75 for a locksmith try to program it for my son's 06 coming to find out the board inside was fried on both of them so just buy or beware and I'm out about 125 bucks.

@onebigj4u Год назад

That was so easy. I appreciate your step by step instructions. Although mine said "Test Failed" it actually still worked. I couldn't have figured that out on my own.

@staydownklown4389 Год назад

@rodenti 8 месяцев назад

Thanks! Worked perfectly for my 2017 Ram 1500 with Remote Start and Air Suspension button on the fob. Gave me a reason to buy AlphaOBD after years of consideration 😁

@benoitchartrand5772 Год назад

Thanks for the video, I need to add a key as I only had 1 with it. Excellent walkthrough. I'd like to see more of what alfaobd can do from you. I trust you and all the content that you post.

@nleippe Год назад

FYI on some older cars alfaobd cannot read the pin. But, you can go to the dealer parts dept and they can look up your pin for you. Depending on the laws of your state they might have to make a photo copy of your registration and license and/or title (proof of ownership) to keep on file before giving you your pin, but that's easy. Once you have your pin everything else he showed is the same.

@tangogolf846 Год назад

Worked flawlessly!! Programmed two new fobs to replace old two that were failing. Thank you for the tutorial!! I had watched so many other videos that didn't work. (Already had AlfaOBD & MX link+)

@aaroncaswell3000 9 месяцев назад

Did it allow you to start the vehicle also? The buttons use a different transmitter than the keyless ignition in the fob. He never started the vehicle

@tangogolf846 9 месяцев назад

@aaroncaswell3000 Yes. Both push-button start and remote start. Edit: All buttons on the keyless fob work as they should.

@aaroncaswell3000 9 месяцев назад

@@tangogolf846I just got everything today. I keep getting errors when trying to read the code. I get the code sometimes, then get errors trying to get in to program a key idk why it's so bad

@SHADE117ful Год назад

Bruh thanks for the vid just programmed my key that I bought from Amazon now i got a spare finally 🙏👌😎

@BoostedMotorsports Год назад

Heck yeah 💪

@999charger70 Год назад

Great walk through. Only problem I had was the alarm went off when I opened the door. Horn honking, blasting away. Lol Finally got it to stop by hitting the unlock button.

@jeffrial9110 4 месяца назад

Just did it on mine. I used a different obd scanner same make but its green and cheaper. But used the same program. Thanks Boostedmotorsports! Watch all your content cause i got the same truck

@MainTap-tm9wo 21 день назад

The lx one

@vninjadfw 4 месяца назад

Instructions worked great. Thanks!

@gingerci1347 Год назад

Awesome 👏 thanks for sharing this video. Very informative

@omorin34 Год назад

Thanks for this vid. I saved it so I can replay when I'm doing this tomorrow. Question I have, when you completed this procedure, will the key start the truck or is there a separate procedure for that? I'm going to add the remote start as well.

@AllyGirl-s9m 26 дней назад

Thank you so much. I just programmed two new keys for my 2014 Jeep Grand cheerokee larado

@Mike-01234 Год назад

Thanks I bought one of eBay for $20 the only difference was the ram logo was missing off the back of the fob, so I swapped boards with the OEM that was no longer working so the new board was inside the old plastic housing. Programming worked just like your video said it would. The only thing is you skipped through the radio hub kind of fast had to look at another video.

@henryg683 Год назад

Magnificent job John!!!! I wouldn’t expect anything less though!!!! See you in the next awesome video!!!!!

@Pakmann2k Год назад

Thanks for this video, super appreciate it.

@MM_in_Havasu Год назад

Great info, thanks man!

@sunshinesallday Год назад

Great video.

@ShooterQ 3 месяца назад

Thank you for the video. Do you have any info for doing a similar process with the keyless entry buttons on the trunk of some vehicles? I have a Dart with a trunk button that's on the fritz and I want to know if I can either disable mine or program one that I take off of another car for my car.

@abdullahmalek9027 Год назад

Can you switch from key ignition to a push to start button on the single cab?

@leehancock2782 Год назад

Man that was easy Thanks a million

@bignick3303 Год назад

Thanks boosted. 👊🏼

@tgtshirts1 Год назад

Very cool! Thumbs UP Cheers

@CoolDudel537 Год назад

Hey have you ever been in a case where when you tried to program a key and when your reading the pin it says incorrect pin

@mannygee9540 Год назад

Can you do a video of regular key fob to push start conversion?? && what would it take??

@danielmoniz3986 Год назад

If you haven't a video explaining more about alfaob would be awesome. been thinking about purchasing it but was curious if i had to order the obd dongle seperately.

@BoostedMotorsports Год назад

Yes both items are in the description for what you need to get 💪

@danielchavez7377 Год назад

I found the uncompleted process but the new key is working correctly even the remote star if it has still been programmed, will it be okay to leave it like this or will there be a problem?

@kanth66 6 месяцев назад

Can I use the OBDLink LX to program my 2014 Dodge Journey Crossroad with AlphaOBD.

@ralylo Год назад

Do I need bypass module connected?

@Ukeelau 8 месяцев назад

My 2014 Laramie has the FOB with the air suspension button. Does that feature have to be programmed as well?

@Tony_Tech 3 месяца назад

Just wondering can you program 2 car key controller at the same time?

@rosswitte Год назад

Your link to the software download is for a "demo". Is that what you used or did you pay for the software download? Great video and thank you.

@Thugerrrr Год назад

I have a 2019 jeep Cherokee but on alfaobd it only has years that goes up to 2010 should i click 2010 since it the closest year or???

@Dmagana03 5 месяцев назад

How did you find the fcc id and part number?

@andreacas2472 Год назад

Any idea? The ECU has detected that the request contains parameter(s) with value(s) outside allowable range. When was writing PIN code to key

@tomk3635 Год назад

Does this work for 5th gen keys?

@To-Masz Год назад

This method works with Jeep Cherokee kl 2015? I read the pin from the RFH which has 5 digits. I entered it but suddenly it shows that the pin is 4 digits. alfaobd may not work with cheroekke? Apparently appcar from Windows does it better. Please help.

@AdorableDeplorable1 2 месяца назад

For my 2013 Ram 3500 it required me to turn the ignition of (locked) before I could get the programming to start.

@MrRGM10 Месяц назад

Bro can we program remote start

@puscifer03dude52 Год назад

Can you do a alarm system video bro for the rams

@SaraDouga 4 месяца назад

Mine won’t read the pin 😫

@shardailayton391 6 месяцев назад

Can you show us how to shut off or reset any anti theft and immobilization on 14 dodge ram larime push button start PLEASE IVE BEEN COUPLE WEEKS WITHOUT MY TRUCK NOW

@glockdee6 Год назад

What year truck was this ?

@christillman7762 Год назад

I purchased two key fobs and OBDLink MX+ for my ‘14 Ram 1500. What I did not do is remember/pay attention to 1) that DL is only for android or pc. (I have MacBook and iPhone) I do have an old Dell laptop. 2)either I got the link to download and didn’t or I just didn’t do it. I’m not good with any of this. Is there a way I can get the free download? I have proof of purchase through Amazon. I did read, today, that DL was only good for so long immediately after purchase. 🤦🏼‍♂️ Any help is appreciated. Thank you

@todddevine8818 9 месяцев назад

How and where is AlfaOBD purchased….can’t find it on big A, and the site isn’t opening

@davidchartrand6213 Год назад

Mine just said ...test passed..not completed. Do I wait for a completed mesaage or does test passed mean it worked?

@accesstoeveryone Год назад

Bought it all, works as advertised. Great tutorial. Any ideas why the door proximity sensors dont work. I have to push unlock with this keyfob only. Originals work fine.

@The_Original_Trail_Limo Год назад

Same here. I wonder if you have to do another step to enable that on a new fob. 🤷🏼‍♂️

@robertw5763 5 месяцев назад

It's possible the feature got turned off. Did you look in your settings on the radio to make sure it was still on?

@MarkK01 8 месяцев назад

@BoostedMotorsports So how much does it cost to use the app? There must be a fee associated with it somewhere.

@pmgear Год назад

Did you use the demo version of the software for this (that you linked to) or the full version? Thanks for sharing in these vids, much appreciated.

@pmgear Год назад

after connecting I can answer that you need the full version. 50$, I think well invested.

@Gunbrothers Год назад

Can somone still my srt with this ?

@TheJeeper 9 месяцев назад

What year vehicle?

@richardharris5819 Год назад

For some reason, Alfaobd keeps providing a false PIN # had to pull out the Xtool D9 pro to get the correct one.

@Justin-nw2kh Год назад

do you think this would work for 2012 Ram 1500 with the key fob that inserts in the key slot?

@robertw5763 5 месяцев назад

Yes

@mikeyncali Год назад

So I left a message that I couldn’t program a 2014 jeep Cherokee latitude and guess what it’s different than a ram and I am gonna make a video of it and get some views I searched for days and nothing and I figured it out with my pea brain couldn’t believe it. I LOVE APLPHA OBD!!!!!!

@1991natedog 7 месяцев назад

I get to the message for the unlocking and I okie the message away but it the says “procedure results:key programming procedure failed,reason unknown” I don’t know what I’m doing wrong I drive a 2015 Jeep Cherokee push to start I also get the message say the message about the ignition needs to be in lock state when I try to do this in accessory any one else run in to this situation

@BeNCalma_3881 Год назад

is this works on latest model? i have 2022 RAM 1500 sport and I want to add new keyfob with start.

@robertw5763 5 месяцев назад

Won't work with 5th Gen trucks due to them using rolling pins

@Unfinished-Business24 10 месяцев назад

Odd my pin gives me a 4 digit code but when i go to program it . Than it asks for a 5 digit pin any idea y. Also do u have passive entry when u touch handles it locks and unlocks ur doors and did that still work for you?

@robertw5763 5 месяцев назад

Your truck is probably newer that 2018 I would guess

@trxrider Год назад

Can you also change speed limiter with this?

@topmonkey6512 Год назад

Hi, I have made a video about changing the speed limit, just for Mercedes Benz: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dJsPDoC3Uc4.html You can take a look, it may help you.

@johnnnyo1 6 месяцев назад

Hey there, thanks for all your content. Do you know if I can use AlphaOBD on both Android and windows pc with the same license? Thanks

@robertw5763 5 месяцев назад

They sell them separately. I tried to install the app on my PC after buying it on my phone and it wouldn't let me use it with a license which you buy separately from the android version. I think they offer a discount if you buy it for both.

@johnnnyo1 5 месяцев назад

@@robertw5763 thanks

@closedsocket 7 месяцев назад

Is there a way to program the fob without the vehicle being on if you lost the other key?

@robertw5763 5 месяцев назад

Mine made keep the truck off in order to program it so yes this will work

@jacesnider972 Год назад

So it worked for me but i went too the store and noticed that it wouldn’t lock so it must have unpaired some how? So what do I do about re pairing it

@robertw5763 5 месяцев назад

Unfortunately you can't repair it and you'll most likely need a new key. My cheap eBay key did the same thing. It's just the risk you take I guess

@duncanmacleod280 9 месяцев назад

Did you not need a security bypass cable?

@antoniogiop 7 месяцев назад

@MountKash1 9 месяцев назад

I wonder. Has anyone tried this method with the Vlink MC+ instead of the Obdlink MX+ ? I know AlfaOBD website says the Vlink MC+ works with Alfaobd in general. But it doesn't say if the key fob programming feature superficially, will work with Vlink MC+. I mean it also doesn't specifically say the Obdlink MX+ works with the key feature either. If anyone has done this with the Vlink MC, I'd appreciate it if you could confirm it works. Thanks

@Drone-Aerials 5 месяцев назад

I know this is an older video so i may not get a reply but I'll try anyways... Might be a dumb question however, if my original fob HAS the remote start and i program a new fob also with the RS, do i need to program the RS feature or will it automatically do that when i program the fob?

@robertw5763 5 месяцев назад

The RS should work just like your original key after programming. No additional steps

@Drone-Aerials 5 месяцев назад

@@robertw5763 thank you

@keithcastleberry3993 Год назад

I'm assuming each fob has to be done independently of each other? So when the 2nd NEW fob is being programmed a NEW pin is given to link it????

@robertw5763 5 месяцев назад

Your pin is like the SS number for your truck kind of. The pin stays the same unless you have a 2019+ model ram at which they switched to rolling codes and we can no longer program keys on our own.

@OscarHernandez-rj1dl Год назад

I try to download it on my phone doesn't work. This is do I need an iPhone?

@ramblingram3662 Год назад

Dang, I tried it this morning. Mine won’t read my pin. Says it’s not supported by the unit

@DiyintheGhetto Год назад

Where do we get the OBD2 programmer from?

@leehancock2782 Год назад

Alfaobd is from Google play store

@oldbroken7386 11 месяцев назад

Tried this and it failed. I have 2020 Ram 2500 and was trying to "READ PIN" in "Alfa OBD app" for Key Fob programing. It did not work, app said that "my truck has 5 digit rolling pin number" and that option isn't support yet. Any FIX to that by Alfa OBD and OBDLink MX?

@robertw5763 5 месяцев назад

I believe in 2019 Ram started using rolling codes for the key fobs and we can no longer program them ourselves. Security/more easy money for the dealership.

@Deadbass_ Год назад

Tried this method on my 2014 Jeep Cherokee and unfortunately for my case, it thinks my key is the physical key even when selecting the high line system. Gives me “Please ensure un-programmed FOBIK is in the ignition, and ignition lock is in LOCK state.”

@hectormachuca8146 Год назад

Trying to do this on a Challenger, i pull the pin (4 digit) but when I go to type it in to program new Fobik it asks for a 5 digit pin

@Unfinished-Business24 10 месяцев назад

Same for me on my ram I was only given a 4 digit code I don't know what to do now 😮

@Music-cq8nr 4 дня назад

Left the part out where you need the $50 software 😂

@rustyshaklferd1897 Год назад

Any idea what it cost to have a new fob made? $500 for the computer to make one key is a bit much for me. I bought a used charger and it only came with one key. The dealer won’t make a second and says they charge too much he doesn’t recommend it. I didn’t think of it before I put the down payment on it.

@BoostedMotorsports Год назад

If you’re local to Tampa I can do it

@harleydavidson5309 11 месяцев назад

Help please...I did this exact procedure 4 times with 3 e-bay new keys like the one in your video and 1 OEM key..ALL programed fine like your in the video....UNTIL i drove the truck and shut it off...First time i thought it was ok and drove the dog to the park,shut off the truck and it wouldnt lock,I tried to start it and nothing.I had to call the wife to bring me my old keyfob..same thing with the next and then i bought a obdlink instead of the VeePeak i was using and same thin happened....the last time i got a reman oem fobik and everything seemed fine started it in the drive and shut it off 5 times,then drove it around the block,pulled in the drive and shut it off and same thing the fobik went dead..wont even start the truck if you push the button with it. And when you try and program it again AlfaOBD says "Failure:Fobik already learned"...i'm using a OBDLink MX and AlphaOBD ..and thoughts or suggestions.

@bcsmith6977 6 месяцев назад

Have you figured out why your fobs die after the first ignition cycle or trip around the block? My truck is doing the exact same thing.

@CalamityBaird Год назад

How can I do this if I lost my original key? Like how does a locksmith turn on my car to program a key without the original? I was dumb and never programed my extra one and now I of course lost my keys.

@leehancock2782 Год назад

I didn't have to turn mine on to program it

@shardailayton391 6 месяцев назад

@@leehancock2782 what programmer did u use

@bobbychanthamixay8369 Год назад

Anybody have success doing this with the proximity entrance?

@accesstoeveryone Год назад

I have the same issue. Did you find an answer to the proximity sensors?

@pmgear Год назад

I followed this and the fob works, car starts but the keyless entry (door unlocks when I touch the handle) does not work, I have to push the button on the fob to lock/unlock the car. Not sure I I choose the wrong highline system in AlfaODB??

@The_Original_Trail_Limo Год назад

I just discovered the same thing. I’m wondering if there’s an additional step in AlfaOBD to link the handles with the new fob.

@pmgear Год назад

@@The_Original_Trail_Limo I talked to the supplier of the key and it is not supported, their version of keyless entry does not include what is considered Keyless entry by the rest of us. I guess you have to get a dealer key and not a cheapo ebay key like I bought

@scottcpan68 Год назад

Does your vehicle have the passive entry from the factory? Did it work with the original fob?

@pmgear Год назад

@@scottcpan68 yes and yes. I contacted the ebay seller of the FOB who claimed keyless go was supported but his definition of keyless go is not the same as Dodge's.......keyless go to seller means push button start.... so that is the problem, you need the OEM key fob for that to work

@rachelt3560 Год назад

I got all the way to read pin and it just kept saying interface error, told me a couple of things to try in preferences and still would not work. So 139. for obdmx+ and 50. for alfaobd app. Out 200 bucks. Epic fail.

@lamar23bham 11 дней назад

Same here. Were you able to get a pin???

@curt035 Год назад

Unless you pay for the full version of AlfaOBD it won't work. It's $49.95 to retrieve the PIN. My local locksmith programmed my $29.95 fob from ebay for my 2016 RAM 1500 and cut the key for $60.00. That's the safer route IMO.

@scottcpan68 Год назад

Yes but AlfaOBD is great to have. You only have to pay for it once and it can be used on multiple vehicles. You can do a lot more than just program keys with it.

@laneblount9888 Год назад

I wonder if you can program a 5th gen key fob to a 4th gen

@naniyo98 Год назад

Did you find anything on it 😅

@jonny_chain1970 6 месяцев назад

Mine tells me something about a rolling pin

@robertw5763 5 месяцев назад

You can't because they now use rolling codes instead of the 4 digit set code that the 4th gens use

@jiovanysanchez6787 11 месяцев назад

i got it to program but 15 minutes later left me stranded and now the key dont work,? any ideas

@robertw5763 5 месяцев назад

I think this is common with the 2013 rams (not sure what year you have) when using the cheaper keys. I just had the same problem and ordered an expensive Mopar official fob with a replacement warranty.

@jiovanysanchez6787 5 месяцев назад

@@robertw5763 yea i have a 13 , i had to order one from the dealer as-well

@thatonetallguy Год назад

Does it require that specific OBD Link MX+?

@misplacedcaper9662 Год назад

No. Any basic OBD dongle will work. The MX+ does allow access to other systems though, such as ABS module, etc... that the cheaper ones may not.

@JayCeeMax 9 месяцев назад

Did your "Panic" button work?

@MUDSYNDICATE 6 месяцев назад

It’s won’t show me my 4 digit pin

@wojtasja24 5 месяцев назад

Też tak mam .Znalazłeś jakieś rozwiązanie problemu ?

@user-ru4xb3tn5i 10 месяцев назад

I have that one just died.

@dmm5157 Год назад

Just tried it, looks like it does not work for 5th Gen RAM. Bummer

@miketaylor540 Год назад

Dam I wish I saw this before buying all the stuff

@phelps1485 Год назад

I have a 5th gen thx for posting!

@brim8499 Год назад

Even if you have the bypass cable hooked up??

@dmm5157 Год назад

@@brim8499 yeah, apparently the 5th Gen has a rolling code. Needs to be done by the dealer. It's an anti theft thing. I have looked and not found a work around yet.

@brim8499 Год назад

Doesn't seem to be stopping the guys steeling these trucks nightly lol