How To Properly Install Mouse Feet (Corepads, Tiger Arc 1s, 2s, Ice, Hyperglides) on Any Mouse 

One very important thing I forgot to point out, the sensor ring has the black adhesive around it too! I removed it off camera and forgot to mention it. Once you get the sensor ring up, you’ll see 6 small dots similar to screw holes. This is very easy to miss and I originally did in the video myself, so make sure you see the 6 small holes before putting the sensor ring on. It’s a pain to remove, so remember to be patient and gentle, and not to point tweezers towards the sensor if you’re using them. :D

No BS, straight to the point. Tells you what to do, what to watch out for. Couldn't be better 11/10

IMPORTANT note: The second layer of adhesive on the top skate is also present on the circular sensor skate. Make sure you take off the second layer of adhesive around the sensor too or your skates will be uneven.

This tutorial was exactly what I needed! Thank you so much for taking the time to make it.

YOU HAVE JUST SOLVED MY LIFT OFF ISSUES! THANK YOU SO MUCH

Excellent video - really helped me greatly. It might seem like a simple concept, but many small things can go wrong and now I did it perfect thanks to you :)

this was very helpful. thank you so much, for years i have just been putting new mouse feet on top of my old ones. you are the first person that actually explained how it should be done correctly. thank you!

This tutorial helped so much, I watched another that didn't say anything about the ptfe puck and I couldn't tell if I had to take the black adhesive off that as well, so thank you!!

This helped me out so much! When I intially did the process i didnt take the black adhesive off and the LOD was terrible. Thank you for this video, it works perfectly now!

YOU Saved MY LIFE. I installed them and then immediately checked your video and found out that i forgot to remove the old black layers! Removed the new ones carefully, removed the old black layers and then reinstalled the new ones

A few tips... If there's sticky adhesive that won't come off, or comes off too slow, mineral spirits is way better to use. It'll turn hard to remove adhesive into easy to remove gel in a few seconds when left on (as in don't apply and immediately wipe off). THEN use alcohol to wipe off clean. One more tip. it's a good idea to keep a bottle of 99% Isopropyl Alcohol (IPA) around, it removes residue better and has less water which means it evaporates with less residue left behind. Comes in handy for many things electronic. I dropped my phone in water, completely submerged, (removed batt.) and immediately put it in container with 99%IPA (so phone was completely covered) and the IPA replaces the water. I put my phone up right for a minute to drain IPA and then flat in a warm place. This way I didn't have to worry about mist/condensation between the screens that you can't get to as it was the 99% IPA and evaporated without leaving water spots on the inside of the screen.

My Superlight and Core pads come tomorrow can't wait to do this! Thanks for the link to that nylon tool I haven't been able to find it anywhere!

still helping people a year later, thank u!

Your humour reminds me of a smarter, and female version of boardzy 😂

Thank you for the heads up on the extra adhesive. The product i bought had two sets of skates so I re-installed. PHEW!

The Second Layer thing is very helpful thank you! I just removed them to maintenance my mouse, and had to learn about that the hard way.

Thanks for the tip on the black foam adhesive! Although I messed up one of my corepad sets taking them off, my mouse feels so much better now.

Great job explaining how to install the corepads! Liked and watched all the way through and looking forward to the next stream 👀

Great tutorial, precise and straightforward

This helped me so much, Thank you! The extra adhesive layer was bugging me so much.

Aw this helped. I had played valorant with the Ice feet on the black adhesive for 1-2hrs and I was like this feels off... but maybe its a placebo. THen i found this video and posted on MouseReview to confirm that I had put on the feet wrong. They do feel solid and more flat now. The middle part is unfortunately kind of scratchy cause of being uneven. Thanks for the video.

Really well explained and most definitely helpful video, thank you heaps : D

I just bought this mouse with corepadz and this helped a bunch!! Thanks!

Girl you save my life with that video!! Thanks a loooottttt,I'm from Brazil by the way 🇧🇷🇧🇷

tells no bs, great video, thanks

Go ahead and ask me how many times I bought feet and not realizing the black layer of adhesive was preventing all of the feet from working properly 😂 thank you life saver

omg thanks for this video i thought i wasd going crazy for so long that my mouse sensor was faulty had zero clue there was another level of plastic i had to remove

Good video, no need to apologize so often!

I’m so glad I found this video 😭

I love you man

Thank god i watched this video before installing my skates, thanks

Followed this for my g pro wireless worked flawlessly thanks!

thanks a lot for this video, I didn't know I had to take the black things off aswell and I just wondered why is my mouse not movin smoothly, this video explained everything.

A great upgrade

Just changed mine! thanks. Almost didnt realize the sensor had adhesive on it as well.

had no fucking clue there was a second layer to my x superlight. appreciate the nice and easy how to

amazing, just put these on my g502, works like a charm with my 5 year old qck heavy :-)

Well done, good instructions i followed your steps and they are installed perfectly 💯

Hey thanks for this; just modded out my Burst Core and put some core pads on there!

great vid!

I didnt know about the blach adhesive! thanks for telling me

2024 here! THANK YOU SO MUCH!

500 like is mine :D Great video! So looks like the main thing is to clean adhesive from the old skates...

Ty fir the tutorial this still helps in 2024

Thank you! :) Straight forward no timewaste.

Me: Why does my mouse feel weird and keeps losing tracking? *Watches this video* Me: Oh there's an extra sticker under the stock skates and now I feel like a moron.

Thanks mouse lady

DUDE THANK YOU I WAS LIKE WHY THIS FEET IS NOT SMOOTH THEN I SAW UR VIDEO AND BOUGHT ONE MORE.. NOW ITS SMOOTH AS FK

It would be way easier to pull stock glides off by using a hairdryer for a minute (not at full heat ofc) since glue would warm up and liquefy a little, thus having less resistance towards physical action. Also about why you need to use wipes, most adhesives need defatted surface in order to stick to it, be it wood, plastic or any other material, and alcohol does exactly this, not only disinfecting surface, but also making it dry/defatted.

Thank you :)

Thank you for this! Subbed

Great tutorial, thank you.

Hey that was really good and to the point.

Thanks for the tutorial! I don't think you need to be so apologetic. Your content is great. Maybe just ask for feedback in the comments instead?

Thank you, this video helped a lot :)

was very helpful, thank you so much!

had massive lod issues with mine, removed the sticky stuff and saw screws. the big pad is waaaayyyy too thick and it's fine for a while but it starts to expand with heat etc

I think it's also good advice to wash your hands before doing this so dust from your hands doesn't get on the adhesive

so glad mine came worh 2 sets cause i’ve been having lift off distance problem

So what's your favorite skates so far for the superlight. Great video btw :)

thank you, now i can have better slides, appreciate it!

Thank you for the help it was a great video and helped me do amazing

Great video 😊

Thank you, this really helped me out

great tutorial

What are those keycaps that looks hot ngl

you forgot to remove the black layer around the sensor though

this was a very helpful video. i just put pulsar superglides on my logitech G PRO X Superlight. made sure all surfaces of the application area was very flat. and the result: mouse creep. i used a level and my desk is out of level. so another task awaits 🤣🤣 [edit:] actually used an electronic level and the desk is definitely off of level.

u need to stop apologizing !!!!! sall good :) other than that great video. would you reccomend the corepadz to someone who has never used a product like this before? are they worth it?

I only saw your video after pasting the mouse feets without removing the second black layer. What do I do? I remove the new mouse feets and try to remove the second layer and paste again or do I leave it anyway?

thanks bro this is fire

Great tutorial

I used toothpick for sensor part, made me less scared to scratch if i somehow messed up peeling away from sensor..

didnt realise that second layer of adhesive, fumin

Video helped a lot! thx!!!

Regular gpro wireless (first model) also have 2 layers of feets/plastic? Thanks.

THIS IS WHY MY MOUSE HAS BEEN FEELING UNEVEN

Thanks this helped a lot!

great video thank you

That's very informative.

Hi I got my g pro x super light recently but haven’t gotten my mouse pad yet because it’s still delivering I’m currently using paper but noticed these tiny scratches on the skates. Is that fine and would it affect the performance? Also I’m currently using stacked paper as my mouse pad sooooo yea it would be helpful if you respond

thank you i was avery scared to do somthing wrong thank you

How do I find feet specifically for the mouse I own though? (It's not a mainstream mouse like the gpx)

Thanks for the video explaining how to put them on properly, got my Superlight today and Corepads come tomorrow. Probably a stupid question, but figured i'd ask anyways, replacing the feet doesn't void Logitech's warranty, right?

would corepadz work on the new final mouse shoes coming out?

Hello! I just got sent some corepads v2 for the superlight and mine didn't come with any alcohol wipes. Don't know if that is normal or if I misinterpreted what you said in the video. What should I use to clean the mouse after removing the skates? Should I use rubbing alcohol? I haven't started replacing them yet btw so I still have the stock feet on lol

Hi lady, is the glide really better with this exchange?

Wish I could’ve gotten my super light in white but all sold out, so pink it is!’

THANK YOU SO MUCH

Which of the 3 tiger feet do you prefer the most and what is the diff between arc 1 and 2? Im planning to order ice and either 2 or 1.

Hi, why don't you use the extra round slider? I had stock glides and i dont know if is better to use the extra supplement.

Been playing for weeks with that second layer of adhesive on and been having tons of issues lmao new skates will be here tomorrow

Is mouse feet replacement a thing? Should I worry about it?

very useful thank you

I believe, might only apply to tiger arcs, but you’re suppose to put it on the slot as light as possible and use a flat surface to apply it as there should be an air pocket which you don’t want to bend as it can make it inconsistent which is more noticeable with lower sens. Saw a few Reddit posts saying this as some ppl complain issues with mouse feet

Hyperglides for the gpro wireless are a bit high, sucks i can't tweak the lod..

What I would really like to know is what type of glue can I use for my new mouse feet in case I need it? The thing is that I bought new sets of Tiger Glides Ice both for my RVU and GPxSL and the biggest compliant on the reviews is that sometimes 1 or even two of the set have no glue layer on them. I haven't checked mine out yet, so I'm curious about what is the best type of glue to use in order to be able to swap these feet too when I have to without too much of a trouble because I don't really want to bother with sending the feet back in this case.

idk why but the black base left another layer of clue and some other shit on my mouse which i cant clean with the alcohol pad. idk what to do xd

I play only Val and I need more control and precision I use a Corsair $40 mousepad and a super light with superglide but my aim in Val is terrible because it’s too smooth and I feel like I have no precision/control which pads should I buy?

my son spilled soda on my brand new superlight and now even after cleaning it it still sticks when clicking. i tried cleaning it all