No video :(

How to Properly Use Supports to Achieve Perfect 3D Prints | Groundeffected.com

Подписаться 76 тыс.

Просмотров 27 тыс.

50% 1

People have been asking about my current support settings, so I go over all this in theis new video about my settings for resin 3d printing.
⭐️Huge Thank You to My Patrons: / groundeffected
MERCH Now Available! - groundeffected...
🔔 Find me on SOCIAL:
Instagram - / groundeffected
Facebook - / 548001063221083
TikTok - / groundeffected
Discord - Available through Patreon
Website - groundeffected...
🎨 Supplies: elementgames.c...
🖌️ LIST:
▪️ The Army Painter Wet Palette: amzn.to/3x1VmIN
▪️ Vallejo Black Primer: amzn.to/3PLtpMv
▪️ Bamboo Synthetic Kabuki Brush Set: amzn.to/3t09Ru5
▪️ Tenacious for Strengthening Prints: amzn.to/3CTSU6X
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3a3233S
▪️ Vallejo Fairy Flesh Set: amzn.to/38pbUAT
📍 Check out ROXY ROSE!
....
vm.tiktok.com/...
📌 Playlists to Watch!
Brush Control:
• Brush control
3D Printing:
• 3D printing
Painting:
• painting
📌 Other Videos You Might Be Interested In Watching:
What happens when you stroke your brush? Important knowledge!
• What Happens When You ...
I painted a 3d printed Djinn and her pet
• I Painted a 3d Printed...
Using powders to enhance your hobby?
• Using powders to enhan...
How to change FEP sheet for resin 3D printer
• How to change FEP shee...
#3dprint #3dprinter #3dprinted #3dprinting #acrylicpainting #paintingspiderman #resinfigures #resinfigurepainting #spidermanps4 #spidermanps5 #3dprinting #3dprinter #painting3dprints #miniaturepainting #howtopaint3dprints #3dprinted
Technical mumbo-jumbo below:
---------------------------------------------------
Related Phrases:
How I painted my 3D print / Spiderman, 3D Print, 3D Printer, 3D Printed, 3D Printing, Acrylic Painting, Painting Spiderman, Resin Figures, Resin Figure Painting, Spider-Man Ps4, Spider-Man Ps5, 3D Printing, 3D Printer, Painting 3D Prints, Miniature Painting, How To Paint 3D Prints, 3D Printed, 3D Printed Miniatures, Mini Painting, Resin 3D Printer, 3D Printed Minis, 3D Print, Paint 3D Print,
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your own research.
Amazon: Groundeffected is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission fees. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Copyright Notice: This video and my RU-vid channel contain dialogue, music and images that are property of “Groundeffected”. You are allowed to share the video link and channel, and embed this video in your website or others as long as a link back is provided.
© Groundeffected

Опубликовано:

24 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 122

@AlexandreSalf Год назад

Lychee Slicer's technical support guy here. Loved the video. You have done an exquisite job at explaining this complex subject. 😊

@gettingpolitical Год назад

Will lychee slicer work on a 2018 Dell Inspiron 15 3000?

@zraal3759 9 месяцев назад

@@gettingpoliticalshould but will be a bit slow.

@gettingpolitical 9 месяцев назад

@@zraal3759 Yea I just downloaded it, it works great not slow or anything. Thanks for the comment, for anyone else using an older comp like myself, lychee seems to work fine I downloaded the 64bit windows version.

@Mrpancake72 2 месяца назад

I just want to add. Anti aliasing will also change supports that contact the model at an angle. So if you are seeing failures after turning on AA but it was fine before you might need to change your exposure

@EMTBonsai 11 месяцев назад

Smoothing the inside of a hollow model use the Quality slider underneath the hollow 3D thickness movel it up to 2.0 it will smooth the inside of your hollow prints mate! Use the interior/exterior setting over on left to view the inside to place your own inner supports! Hope this helps you out! It would be Nice to help out in return!

@manthiravel6274 6 месяцев назад

Hey thanks for the info. But If I printed with clear resin and the supports inside, The supports inside the models also visible right? how can I remove the supports inside? If u got any technique can u pls share?

@billclark5943 Год назад

I've been printing for a few months and this is definitely one of the better videos on process. Straightforward and not any more complicated than it needs to be

@Hateweek1984 Год назад

My man... your support settings have been my base line since I've watched this video! I really appreciate your humor, and down to earth style...cheers mate! Once I get square...imma join patreon...thanks for helping is newbs out..

@EMTBonsai Год назад

You can right click on the hollownicon in left menu it'll bring up a setting menu that will make the outside see through so you can see the inside of the hollow model amd how thick your walls are ect it's either the hollow icon or one of the top I'll need to jump on mine I was using it yesterday I found all these different hidden like settings!

@justinmiller4406 Год назад

Either this space in 3d modeling about supporting your own models is super tiny (Not a lot of people) or this video hasn't received it's deserved amount of views and likes yet :) Super awesome dude. Thank you so much for this.

@frostreaper1607 11 месяцев назад

Great guide, I would also recommend to run it trough UVtools to catch on those lose 1 pixel small islands and resin traps to avoid issues on the next prints.

@ccoombs4995 Год назад

Lychee is a Lifesaver!! Elegoo std resin also works very very well.

@Groundeffected Год назад

Yea elegoo standard isn’t bad either. Usually cheaper too.

@Ultimaniacx4 10 месяцев назад

So many supports on the inside makes it really hard to clean. Uncleaned, uncured resin on the inside can lead to cracking. I've seen posts on reddit of people's miniatures basically exploding after over a year because leftover resin slowly pressurized. I only ever put internal supports on internal islands. I also leave holes big enough to snake an ultraviolet LED to cure the insides of hollowed models.

@Groundeffected 10 месяцев назад

I can say with confidence not a single one of my statues or miniatures have ever cracked and I’ve made at least 1 statue a week for over 3 years. In my first year I made at least 2 a week. 99% of the time cracked prints is linked with water washable resin too I only use standard resins because of exactly that issue

@luizgustavosilva6260 Год назад

About hollowing with the internal Part beeing smooth: you can use Prusa Slicer just for hollow and put holes in the model Better internal part of the model and less islands in places near the holes

@philfoofighter Год назад

Manual supporting are something I have always backed away from but this has been a great help.

@chrisfivey2321 Год назад

Thank you so much, I find I do struggle sometimes with the settings I use. Some work, some don’t.

@Groundeffected Год назад

Try mine and see how you get on. Just use the mediums and heavies for now and see how it works.

@dougpridgen9682 Год назад

Phrozen Water Washable resin is comparable to your solution but in one bottle. It's strong but also has some give and flexibility, which overcomes the brittle problem inherent in a lot of resins.

@Groundeffected Год назад

I will give it a try.

@tobias9915 9 месяцев назад

This video helped me a lot to get startet. Thank you!

@Groundeffected 9 месяцев назад

I'm so glad!

@anthonydefrancesco9078 Год назад

Mixing Tenacious always works for me as well. I only use it with standard resin and not ABS-like. Great content. I love using Lychee Pro as well. Well worth the money.

@nathanmccook133 Год назад

The newest update to lychee allows you to save 6 support presets (at least in pro version) its awesome. Ive learned too that using siraya tech fast navy Grey mixed with obsidian black tenacious(my go to mix) requires beefier supports or it rips off. But it doesnt seem to mar or damage as much from heavys. Though my heavys are basically what ur medium is, then i have an "anchor" setting that is .5tip and a 2.0 stem diameter to hold things down. I tend to keep most stems 1.5 even on lights and just shrink tip size

@ategevuma7218 Год назад

Great tutorial! Thanks!

@Ellery-USA 2 месяца назад

Excellent Video - still debating to switch to Lychee but this may push me to it

@RAM-1976 11 месяцев назад

Excellent video as always. Thanks for taking the time to explain this.

@leonardodosvinci4130 Год назад

Yeah this ones a keeper, cheers bro.

@timothyday4550 Год назад

Awesome video Brent, thank you

@CherryCreative Год назад

This is supportive support for supports 😍 thank you for all your tipps ❤

@MineScape_Marvels Месяц назад

Any recomendation on head sculpts with detailed hair? It creates an enormous amount of islands with no way to support safely

@EMTBonsai Год назад

Hi, I have been testing elegoo like ABS 2.0 for the past 2 weeks getting the settings down amd printing perfectly as it's alot different to their original like ABS the exposure time needs to be almost doubled for it to even print but I have got great settings to start with for my anycubics and Saturn 2 if anyone is experiencing issues getting annoyed I'm happy to give you these setting and you can go from there with adjusting and tweeking but yeah the same setting I've got working on all 3 of my different printers all print great!

@Fahnder99 4 месяца назад

11:43 best moment

@TheKryptonian68 Год назад

new shop is looking great

@outlawfpv3792 Год назад

I bought a shake weight to strengthen my arm for shaking resin.

@Groundeffected Год назад

Best idea really.

@BionMTG Год назад

nice, I do the same thing with the resin blend!

@hazelscum666 Год назад

Thanks for your knowledge man!

@LokoInTheHouse2 Год назад

Hell yeah .... learned a lot. Thank you. Will be trying out lychee

@BahamaGin1 10 месяцев назад

Thank you. Ive failed every print until I watched this.

@kproductions9963 Год назад

I'm currently experimenting with auto supports for the inside then I'll delete those that have generated externally and add my own. See how it turns out.

@l__bugc__l Год назад

Great video again! Very helpfull stuff! 🥰

@Groundeffected Год назад

Thanks dude. Hope it helps

@l__bugc__l Год назад

@@Groundeffected it probably will 😃. Im in the middle of working on an ikea hack, transforming a glass cabinet into a terrarium. I had to put 3D printing/painting on hold because of it😢.. i have an anycubic Max in the box still after 3months🙈 haha. Terrible.. but hope to finish soon so i can start and start real life learning.. but ill prolly keep you posted on that 🤘🏻☺️ Im realy eating your vids like sweet cake every time and cant wait to start.. but have to finish that dang ikea hack first 😩 Its for a sponsor and there will be a build vid.. so you can imagine that takes time, editing stuff etc.. Oh… -> i forgot to say thank you.. thanks ☺️ Absolutely love your channel bruh 🥰

@martinez8650 Год назад

Lychee pro is the best. Now supports filament settings if you use both forms of printing

@Groundeffected Год назад

It is really good. Their discord is solid for app help too

@mikek2824 Год назад

Also why don’t you use auto supports and then go in and add supports where they are needed?

@naphtoe622 Год назад

Good info. Thanks!

@Groundeffected Год назад

Thanks for watching dude.

@MMQsTacosConLimons Год назад

Can u show us your fdm settings in lychee too?

@MMQsTacosConLimons Год назад

This a dope video thanks, I was wondering what were your mini support settings for light medium and heavy?

@JoseTarrada Год назад

Hello, I love your videos, they solve many problems for me, but how do you manage to print with lift distance at 3 mm? In my printer, if the pieces are very large in the center of the plate, the print does not come out and I set the lift distance to 5, I have a Photon Mono X and I use anycubyc basic resin. Thank you for your videos

@Groundeffected Год назад

I don’t have any real issues to be honest. I do use a fairly tight fep though. But on my larger printers I lift up to 6mm

@mgallimore32 Год назад

i thought upping the quality smoothed the insides of the hollowed model!

@Groundeffected Год назад

Yea but never perfectly at least from my last tries I’ll try again though and see

@Shrimpmakro Год назад

If you higher the quality-setting of your hollowing you get a smoother result.

@Groundeffected Год назад

It’s still never as crisp as it could be. I had to get someone to hollow so,etching for me before cos it looks like butt when it’s printed.

@EMTBonsai Год назад

New sub, amd totally agree with lychee pro it's a must I think! I have been I to 3D printing only 3 months now I got lychee pro as month trial at the start amd when it was back to basic oh waw it's rubbish!.I was lost lol I'm now on my 3rd printer the mono 4k I started with is great but to small so got the mono 2 2 weeks later agood bit bigger brilliant printer it's just incredible but wanted bigger lol just took delivery of saturn 2 the other day waw can fit my anycubics inside the cover 😂 but there all special in their own way I love them all!

@aldogaribay2147 9 месяцев назад

Awesome video man what are your settings for 0.03 layer height on your Anycubic M3 Max i use Sunlu Standard resin? like exposure settings and speed trying to achieve the highest quality and speed.

@Hateweek1984 Год назад

I'm literally printing a freebie from loot as I watch this....I have questions lol

@Groundeffected Год назад

Haha 😂

@ronsone8373 Год назад

So I bought a printer and thought yeah! Then I looked at supporting and thought neh... Then I supported weakly and got failed print after print and was ready to throw the printer away. Then I saw this supporting video and yeah succesfull prints thanks sir... you made supporting easy!!

@leonardomacleod Год назад

I have changed my supports to use the groundeffected config. and now I do not have problems anymore and I just use light and heavy supports

@Groundeffected Год назад

Nice be careful with those lights they can be deceiving they not very strong only good for small nuts that need a gentle touch. Haha

@leonardomacleod Год назад

@@Groundeffected I know, but I use expose time of 3 secods that way I can have a stronger light support for my nuts hehe

@gettingpolitical Год назад

Loved the video as always, very few 3D printer channels actually go through the support usage and even addres slicer operations, i am glad you did. Its aplreciated.

@billfowler1165 6 месяцев назад

Amazing. Dude! Amazing.

@alanbalmer5001 Год назад

Hi mate love your model but can you do some fdm printing as not all have resin printers mate thanks and merry Christmas

@TheRicky664 Год назад

Do you not use infill??

@Groundeffected Год назад

Nah just support the inside.

11 месяцев назад

wow thanks so much!!

@stevecool7096 Год назад

I use Chitubox because it's the first one I came across. I may take a look at Lychee after this. It's got some good features. Cool..

@mitchellkruszyna109 Год назад

Way to shake it, Your Dad! I use Chitubox non pro, it seems simpler to me.

@HauntedProd2009 Год назад

Hey, I'm a new unexperimented guy in this complicated world, and I loved your video. Your explaination was very perfect for me. Thank you !!! And go on making me dream with your paints. I love it !

@Groundeffected Год назад

I’m glad dude!!

@mikek2824 Год назад

What do you do when you can’t get a 10mm magnet/ 10mm hole in the model or even 5mm holes? Is it still possible to do magnets?

@Zen_Modeling Год назад

I have used Lychee pro for about 6+ months with an Anycubic. I just purchased a Elegoo Saturn S & noticed that when I sliced the print it had that ctb. At the end… I couldn’t see where or how to change that?? So I was worried if it would even work… it did print. Is there a setting I can change for that or I’m I just clueless…🤓 Killer Video BTW- ZenModeling

@roguemotionllc Год назад

thanks for another greaqt video. any tips on printing larger prints on larger build plates like the M3 Max? I know bigger buildplates cause bigger suction force.

@ZarekDaniel20 Год назад

This has been a learning curve for me over the last week. Almost all of these tend to be either aimed at small plates or supporting miniatures instead of bigger prints. Any resources work for you so far?

@roguemotionllc Год назад

@@ZarekDaniel20 even though it is mainly focused on mini stuff tableflip foundry (youtube, twitch and discord) and the guide by J3D tech has been helping me out a lot. It has been a learning curve going from a saturn 2 to a peopoly forge but using the resources from tableflip has been allowing more successes than failures.

@1990Tom1 Год назад

Im using an Anycubic Mono X 6K. Everything under 3.5 seconds exposure time won't work. How you can use 1.5 seconds? What UV power do you have?

@Groundeffected Год назад

Weird. I think I dropped mine to 95. But maybe I didn’t either way at 3.5 seconds I’d just have blobs. But also every machine is different and maybe my light is more powerful than yours the distance between them could be different the screen’s different so many things.

@1990Tom1 Год назад

@@Groundeffected thank you. My UV power is set to 65. i will try 95

@thebrokenrojin5916 Год назад

i have a mono x 4k and the manual says to set the uv to 80. check your manual but it should be around that

@insanity_squirrel 2 месяца назад

Why no AA on the export? I find a 4x+ AA set to sharpen details really makes things crisp Also thanks for the simple hollowing tutorial that was super helpful :))

@Groundeffected 2 месяца назад

This is so old now dude. I use 8 for level and 20% grey offset with high def on if I can

@bobbymccourt6794 3 месяца назад

Dad, what are your tip settings? As far as penetration into the model etc? I’ve been using your settings but find that they leave some nasty little holes. Any help is appreciated!

@Groundeffected 3 месяца назад

Those jokes are possibly you might be a little over exposed. I tend to go on the lowest side of exposure to get as much detail as I can and the supports would technically be changing with the exposure too the more exposed the thicker and less the thinner of that makes sense. This is one of the reasons it’s tough to share settings cos there’s so many variables.

@dominicstatuto8482 10 месяцев назад

Is anti-aliasing a good thing to use? Ive been using smooth, but idk if it even does much at this point.

@darrellhood5430 Год назад

Do u not fill in the holes so u can't even see them? Also I use a 5% to 10% infill instead for the inside maybe better then just using supports

@Groundeffected Год назад

Nah. I think that is also why my models don’t crack. Because they still have airflow so if any gasing is happening it’s got a way to leak.

@darrellhood5430 Год назад

@@Groundeffected oh that makes sense lol this is why I like ur channel cause u talk to ur people and give us ideas we didn't think of

@dkev001 Год назад

I have voodoo support settings for Chitubox. Minimal surface damage and will hold any size print. I almost never use more than 20% support density. Sound too good to be true? That’s why I call it voodoo support settings. 😉

@Groundeffected Год назад

Hahaha you know what bro if it works don’t change it! I just want dudes to be able to help themselves and this is what worked for me hopefully helps someone who is struggling.

@dkev001 Год назад

@@GroundeffectedNa, yours are awesome.

@carlstanford7607 Год назад

Why lychee over chitubox?

@Groundeffected Год назад

Chitu kept crashing my machine at first. And now just the simplicity over chitu. Settings make sense and are in English and not some kind of translated English. The work flow is just easier in my opinion. And I had much easier time with supporting and learning supports through lychee over chitu.

@nicwester1 Год назад

I really wish Lychee worked with my printer. And everytime I export as Stl and use Chitubox, it fails 😢

@Groundeffected Год назад

What printer is that? Have you checked recently for your printer in the setup?

@nicwester1 Год назад

@@Groundeffected I check every update. It's the Voxelab Proxima 8.9 Pro (also FlashForge 8.9.) It converts to .fdg files. They aren't communicating with Lychee either, so no hope in sight. Love the printer, but this part sucks...

@NathanMenke Месяц назад

You’re fuckin hilarious man! Thanks for the content

@warfuoco Год назад

Awesome video man! Just a quick question, any idea which is the best layer thickness settings for the Anycubic photon mono x 6k (0.05 or 0.03)?

@Groundeffected Год назад

The specs say it’s resolution is 34 microns. So I’d say o.o3mm dude.

@warfuoco Год назад

@@Groundeffected thanks dude! You are the best! I love your videos, I never painted any figure before see your videos and you show me how to start in this lovely hobby.

@ccoombs4995 Год назад

I use 0.03 on mine. Works very well!

@l__bugc__l Год назад

Btw,, i was looking into the Siraya Tech Tenacious resin.. does this mix with waterwashable resin aswell? i cant seem to find any info on the site.. 😢

@thebeersandthebees Год назад

Hi Uncle Alg.

@georgeashcroft Год назад

what did you do to your ah-ball?

@Groundeffected Год назад

Shot plastic into to see how strong it is.

@sm0knbarrels938 Год назад

How do you use the "paint" on support feature? Is it only available for the pro version? I don't see a shortcut for it.

@thebrokenrojin5916 Год назад

its only in the pro version but you can do a 30 trial of pro for free

@DigitalConfusion 3 месяца назад

I was gonna get lychee, but then your dad told me it will change all of my holes... Now I am afraid.

@rebeccawilliams1096 Год назад

I feel better now that I am supported better 😂

@rebeltaz123 Год назад

lychee looks like it has some really great features. There's two drawbacks, though... 1. you have to create an account with them just to be able to use it. I could provide fake ID, of course, but then there's number 2 - there is no ability to use the slicer without being online afaik. That means that if you have no internet, you ain't slicing. It also brings into question WHY the software needs to phone home, especially if you're using a free version. I like my data and my programs to live with me... call me silly, I know :)

@edwardpeak01 Год назад

Comment 3

@aberodriguez4149 3 месяца назад

👍👍👍

@TrippyyTreyyy 2 месяца назад

you max out the quality to get the inside of a hollowed print to look nice

@prickswithstix1113 Год назад

Algorithm!

@new_comment 4 месяца назад

Lychee is so worth the few dollars it costs for the Pro version. GET IT & DON'T REGRET IT!

@aldogaribay2147 9 месяцев назад

Awesome video man what are your settings for 0.03 layer height on your Anycubic M3 Max i use Sunlu Standard resin? like exposure settings and speed trying to achieve the highest quality and speed.