How To Push start A Go-ped 

@TheThingamajig u need to put momentum on the front and give it gas as ur pushing

@rocketdude1000 no, only with friction driven scooters. They don't have a chain they have a bar that is pressed up against the rear tire and the only way you CAN start it is by "bumping" it

Thanks! Although I thought the max weight was 16 stone?

I just got to know how does dropping it on the back wheel cause the wheel to turn cuz that's what you say exact words how does that cause the wheel to turn dropping it on the back wheel it seems to me that the gravity would drop it right in the same place that the wheel was lifted in so how does it get spinning... and the kid was said if you got a centrifical clutch that is a very good question my friend

@CAPTQYOUELL prime it half a dozen times, choke on full push start it. once it sputters, stop. shut it down, then set choke to off, and push off and ride

I tend to find walking with it and then hopping on it is a much better way of starting it.

It only works on spindle direct drive goped sport scooters.

okay, now try that with a go quad

Dont pin the throttle, and you dont want to push it up just push it along the ground

I wish I could do that mine does a weely if I do that

i tred this shit bro cuz my pull start broke it aint workin.. not even a sign of the engine startin up :( also tried running it and im pretty fast :( do u hold the gas or what? choke on or anythin? more details plz

I have been checking the goped site for 20 years and they never update anything. And almost never make new models. Same overpriced shit all day

All I see on RU-vid of these scooters each one has something you can pull to start it but my scooter that I own doesn’t. I’ve always had to start it like this so I was just wondering what kind of model everyone thinks I have?

What kind of gas does it takes , mixed with oil or with out oil

@IKARTRACER no

pretty sure it is

He could do this to GoPed that doesn't have a clutch

Do i need to put the choke off if I will stamp to start?

I know this only works on spindle drive, but what about if you have a Geo goped or S25 with the cable "clutch" where you can pull the motor away from the wheel? When I try this on my S25 it never works because there isn't enough force pushing the motor against the wheel.

I did that it will not start I dont got a pull string help me:'(

WOW lotta haters in the community

not me nor my dad just an informational viedo

Does bump starting only work with goped engines?

@dragracer3 huge fail

your clutch wont hit it i think as yours is started the more revs fater you go the more your clutch expands

I need to get it looked at by a pro this thing is like not safe the gas swich gets stuck some time I'm just scard of it and love to ride it but I never know what it will do. All I wanted was a stock go ped sport I did not ask for a custom one do u know how I can get a stock sport under $400?? Look at my video and tell me what u thing. Of my pice of shit

my scooter has a clutch so it doesn,t wor ur way

I said you said it causes the wheel to turn no you actually said it causes the wheel to spin that's what I got to know when you drop it let's get this straight the back wheel isn't moving and you lift it in the air by doing a reverse wheelie and then you drop on the back wheel and you say it causes it to spin now that is just not the way physics work dot. I can't help it I'm laughing my ass off and it really you should tell people before you even do a video if this only applies to direct drive like a fixie bicycle there's no way with a centrifical clutch because another guy who wrote something is right the clutch has to be going fast so the shoes inside it expand and then it gripz and then you're moving so you could go hanging onto the side of a car and going to a hundred miles an hour and it ain't going to start. There's no way to start a centrifical clutch motor by pushing the vehicle. That's like trying to push start an automatic transmission car... get a clue. And the guy who said there's a lot of haters. it's not haters man.. it's just like a lot of wasted time of individuals who might not be so mechanically knowledge driven and it would just be much more informative letting you know from the get-go don't try this if you have a centrifical clutch it won't work.