How To Put On The Creature Bonesaw Rails 🦴🪚 

"Better to go too shallow than too deep" I've been trying to explain this to my girlfriend

Teaching skaters to operate a screwdriver- God's work

Skateboards, from the store, had rails, nose guards, and a kick guard in the 1980s.

RON !!!wholly shit man it’s been years. You used to Call me Wamas at the HMB skate park back in the day. Hell yeah good to see your still in the industry 🤘🏻🇺🇸🍻

Thanks for sharing the screwdriver tip. I've been wondering what these things are for many many years

I love this, being a tech. And watching so many people just not mention little things and you legit showed how to level easier and teaching about how not to strip screws

Ricta Speed Rings and Chrome Clouds, the only wheels I use for all of my boards. Cheers NHS, keep doing what you do 👍‼️

Pre drill small holes to prevent splitting or cracking.

Ron still holdin it down. Awesome skater.

This man is an imposter, i've never seen a skateboarder with shoes this clean in my life.

Use the clutch on your drill…you’ll never over tighten.

I had rails on my board in 1986 damn I'm old

What are the rails for?

Most american screws are phillips #2. Always a safe bet as you can use p2 on both p1 and p3 bits.

Bringing back the 90s

Whoa rails on a board again? Like the classic Powell Peralta boards? Sick!

God damnn, creature was my first board back in 2002

Foam double sided tape between the rails and board helps alot with the rattle and loosening of the rails from skating, also more out for grabs more in for slide to grind combos❤

tip from soldering drone work "fun tack" works good for holding something in place on a very slidy surface

what a genius idea. i always wondered why people would ruin the beautiful design a skateboard when they grind. this seems like a good way to keep the art looking nice.

That's a blast from the past

Those look super sick. I have the glow in the dark rails now! Maybe I will give these a shot on a new set up

I was never able to get used to how much heavier the board got cuz of the rails when I tried them

Damn, reminds me of Gleaming the Cube and shit. Let's go back to the 80's and early 90's. I like it 👍.

Bro said “no space” but as someone who works in construction, there was plenty of space lol.

If you did not know how a power drill work AND a screwdriver! Priceless!

Only thing rattling is the bearings. It funny, I’ve noticed that a lot of pros don’t have a clue how to take care of bearings. They’ll use the same unlubricated set for years. Unlubricated bearings are faster, and louder, a lot of people like them loud. Lubricated bearings are smoother. If you lube them with very thin oil, they’ll act more like unlubricated bearings. Hill bombing on a hot day with unlubricated bearings can actually melt the damn bearings. I use sewing machine oil on mine. It’s nice and thin, meant for small moving parts. Then I’ll sit there and spin the wheels by hand until they’re broken in. I’ll do the speed test, where you spin all your wheels fast to see which one spins the longest. I do that over and over for like 30 minutes. It makes a huge difference.

My old Powell Peralta boards used to come like this I think my Mike McGill and Steve caballero came with rails which I took off

In 2010 (highschool) I was on my way to join alien workshop as my sponser. However opiates hit my school extremely hard. I unfortunately fell victim. Ruined any shot at professional skating. Thankfully it only lasted few years. However I never got back into skating. Please if anyone is young and into skating don’t do drugs. They r not fun. They are not cool. And you have so much life to live and you will regret it your whole life that you wasted best times of your life on drugs. I would recommend don’t even drink or smoke tbh. Love you guys keep shredding never give up!

Man I've had those slide guards before and I had to have them installed because they had to drill 4 holes thru the board on each side and on the grip side it was held with what looked like a hallow Allen key but also could've been a rivet and was screwed onto the Allen. Always wanted to get one again and if these screws don't go all the way thru I'm definitely going to buy some and put em on my deck

What are those for? To protect the paint? Or maybe to stabilize while board sliding?

What are those used for? Protect your board on board grinds?

I remember when these came stock on your off-brand Nash from Toys R Us

“Just don’t go too deep” That’s what she said.

This is random but anyone else really enjoy watching the oldheads still loving skating?

Been out of skating for a long time. Whats the use for these? Help pop out of boardslides?

Use double stick tape before you screw

Those bonesaw rails are the best I've ever skated. A little more low profile than other rails, maybe that's why they are so good.

Are these made to make grinding easier? Like how training wheels work for ppl with no balance yet..?

Alternatively don't use bone rails and maybe get an extra flip

This just gave a reason to get some filas 🔥

Pretty sure the drill had a clutch that controls the torque but yeah screwdriver 😂

Yeah, rail slap used to annoy tf outta me back in the 80s!

We need some more Whale talk!!! 🔥🔥🔥

Sickest set up

A 50 year old skateboarder . Now ive seen it all 😂

I remember my Alf skateboard in the 90s had rails man I wish I still had it

Nothing better than adding weight

I used to skate for like 2 summers and i can probably still ollie and do a kickflip, but have on idea what those two rails are meant for ?

Are these just used as protection for the deck?

What are these for?

So I never skated just road bmx, what do these rail things do? Make it easier to grind?

Thanks Tony Hawk👌

And 10 years ago I was being made fun of at the skate park for having these.

When did Ray Romano start skating?

“Better to go to shallow then to deep”- SAID BY NOBODY

What do the rails do other than alter the sound of the board

I don't know man.. it just hurts watching you drill into it! 😢

Led in these and I'd buy them

going back to the old school

what are those for? I use to be great at skateboarding untill I did a triple kick flip over 5 stairs and did a popsicle stick😅 which hurt soo bad I litterally stopped But what are the bars for? they help you grind easier or what?

Does the bone grooves help you to lock in?

Revolutionary

Have not seen this in a while

Awesome drill!!!!!

Coulda put some caulk underneath to help prevent water and mold build up

Thats a cool board

That drill tho 😮

Dam, i thought it was to help slide faster and easier in a board slide!🤣 I can skate still and got a board but ive missed some stuff in the years I stopped!👌🏼😂

where can i get the ones for the tail online

my dude on that black force energy

We had these on our boards when we were kids in the 90s. Thought we were cool if you took them off.

The board snapped your done😂

My first skateboard when I was a kid in 1990 that had these on it but they were yellow,it was a Nash skateboard

I have a creature board, but the trucks suck! I need to find a better set of bearings, trucks and wheels ASAP!

I put a little bead of silicon before buttoning them down...never rattles less noisy slides

Are the rails for grinding? Love skate vids but I've never seen this before lol

pilot holes really would help this aswell

What I wouldn't give 4 this board! 😮

We are going back in time folks

Ron!!!!!!!

“I gotta putem on”😂😂

I'm surprised nobody said this shit yet... BONESAW IS READYYYYYYYYYYYY!!

We used to make fun of people that used those back in the late 90’s. It’s cool to see some common sense in skateboarding nowadays

Haven't seen those in yrs. I remember the cheaper rails would brake as soon as you touch that curb

And the 80s is back jack!! Next will be everslick boards

I remember the Cockroach rails were pretty " rad " back in the day 😅

Oh that's how it's done

With bonesaw you to can have your very own 80s vert deck

So like there was definitely a little space between the board and rail. 🤣 No matter it got job done and kinda looks sick with that board.

Takes me back to 1989

So rails are a thing again? Back when I was a kid, they were a must have.

If it strips Take a toothpick break a piece or two off and stick them in the whole if it strips then put the screw back in

I got ya for threeeee minutes...bonesaw is ready°°

What are they for?

What are these for

That’s what she said😎

Klien tools for the win

flex has left the chat

That drill hasn't been charged in 10 years.