How to QUICKSTOP on a Onewheel in 5 minutes! Onewheel stopping tutorial for beginners. Tips & Tricks

Подписаться 5 тыс.

Просмотров 26 тыс.

50% 1

In this highly requested video, I teach you how to Quickstop on a Onewheel in 5 minutes! I break down the Quickstop into three basic steps and walk you through each one. Whether you ride an XR or a Pint, this video will get you Quickstopping like a pro in no time!
When I was learning how to Quickstop, I couldn't find any good tutorial, lesson, or how-to videos...so I hope this video really helps some of you out! Let me know down in the comments if this helped you and if there are any other videos that you would like me to do. Thanks for watching!
Please consider subscribing to my channel and turning on notifications so you don't miss any new videos!
Gear used:
- The Float Life Drop Top Fender Kit www.thefloatlife.com
- The Float Life Float Plate www.craftandride.com
- The Float Life Sidekicks www.craftandride.com
- Onewheel Charging Port Plug www.onewheel.com
Follow me on Instagram: / hiiimynameismatt
#onewheel #onewheelpint #onewheelxr #quickstop #tutorial

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@MattYamamoto100 3 года назад

Hope you guys like the video! Feels good to be back after the Holidays. 2021 is going to be a great year. Let's go!

@gerryortiz7276 3 года назад

Thanks for the vid! What kicks you wearing?

@MattYamamoto100 3 года назад

@@gerryortiz7276 Just the gold old Vans Sk8 Hi!

@gerryortiz7276 3 года назад

@@MattYamamoto100 Bet thanks

@tonystubbs9189 5 месяцев назад

As someone who already has this move down, I must say this video was super informative. I was looking for rider tips for my daughter when I found this one. Top notch video, dude. Way better than the one I had learned from.

@Lurch685 3 года назад

Welcome back Matt, thanks for another video!

@MrJakefuller 2 года назад

Very helpful!! Thanks!

@Tatad3 3 года назад

I'll apply your tip to get confident doing quick stops. Then I can start learning a curb nudge. Thank you for the tip!!!

@MattYamamoto100 3 года назад

Awesome dude!

@InoDrums 3 года назад

super helpful! thx :) I will practise today :))

@steveorsini9920 3 года назад

Great video thanks buddy

@angeliehayes29 3 года назад

Thanks!!! I needed to see this! Time to learn this trick!

@MattYamamoto100 3 года назад

No problem! Thanks for watching!!

@jackychen7803 3 года назад

Lots of fun !

@Tatad3 3 года назад

Nice tip!! I'll start practicing to get confident on quick stop. I've been practicing on grass and it came in handy for me on a busy Ralph's grocery parking lot this past holiday season. A female driver driving a big pickup truck was going to run me over and I suddenly quick stopped.

@MattYamamoto100 3 года назад

Oh damn. Yeah...drivers can definitely be sketchy! OWs are like a Prius since they're almost silent...no one hears you coming. lol. Thanks for watching!

@MuffinStuffer_TV 3 года назад

Nice production on the video. Thank you for the tips

@MattYamamoto100 3 года назад

Thank you so much!

@rodonyou 2 года назад

I will try that, thanks 👍

@ericpho4060 3 года назад

glad you’re back ! as the others, great quality stuff 👍, never disappointed. It is also cool you’re adapting your content based on users feedbacks & requests, I do appreciate it ! time to practice now

@MattYamamoto100 3 года назад

Thanks man! Let me know how it goes!

@LEXPIX 2 года назад

Good tips.

@musgroveandthepumi1604 2 года назад

Much better than the official Onewheel dismounting video!

@ltme4134 3 года назад

Damn bro! I started on a pint and I have simple stop. Just got my XR and I wish I saw this before I started on it. Super helpful.

@a10sim 8 месяцев назад

Wow! What a great video! Can’t believe you packed so much information in a five minute presentation. Thanks very much. Liked and subscribed😎

@kenworthNH 3 года назад

On my 3rd day with the XR and glad to hear it's not just me struggling with the heel lift. I do wear a size 12 so I think I'm not totally getting my foot off enough. It's caused some very embarrassing splits when I tried to dismount at the store lol

@tristanyamamoto5680 3 года назад

That is so cool 😎

@dapete 2 года назад

Saw Adam Savage do one of these at the end of his build video at the factory and had to know how he did it without the board taking off. Thanks for the tips!

@Rainchaser007 3 года назад

Your channel has been such an awesome find, it's shocking you don't have more subscribers! Your videos are simultaneously calming/uplifting yet also fun and exciting. And very helpful. And aesthetically pleasing, lol.. I'm originally an e-scooter rider and have zero experience with board style riding, but Onewheel has recently caught my interest. Especially since the board style is so much more portable than lugging around a scooter and finding a place to store it. 💀 But yeah. Looking forward to seeing more of your content! 👍

@MattYamamoto100 3 года назад

Thank you so much! I'm trying to get back on it! Thanks for watching!

@TD2253 3 года назад

Thanks Matt! Nice neon sign BTW!

@theskyybay420 2 года назад

I love the look of your Marty McFly board. Back 2 the Future time!

@raverOFgod316 3 года назад

Thanks for this video. I been trying to do a quick stop for the past 6 months but I always held off doing it. I was one of those people who was too scared to take off the front leg thinking something bad would happened if i do it. But thanks to this video breaking down the mechanics very thorough. I was able to master it in 10 minutes. It was like learning a bike for the first time. Once you got it, you pretty much got it. Just go for it, nothing bad will happen.

@MattYamamoto100 3 года назад

Awesome! Great to hear! I was in the same boat. ONce you get it...you're like "why did I wait so long to try?" lol

@iloveyousomuchbrynn16 2 года назад

nice vid

@lauradekreek2067 2 года назад

Hey Matt! Thanks for this video! I’ll definitely start practicing! Can I ask where you got that neon OW light? Love it! Want one for a friend!

@oldretireddude 3 года назад

Hey, 1" wide automotive vinyl trim works very well as a consumable wear material on the leading and trailing edges. It's cheap, easily replaceable. Thanks for the video.

@kalelinslo235 3 года назад

Interesting suggestion. You don't think it will wear through that vinyl super quickly? I was thinking a thin steel skid plate would be ideal. I'll take a look at how thick of a vinyl sheet I can get. Thanks!

@oldretireddude 3 года назад

@@kalelinslo235 I have just over 600 mi on mine. Chewed up but far from worn out. www.amazon.com/dp/B0725ZRSW9/ref=cm_sw_r_cp_apa_i_jun-FbV612K9J?_encoding=UTF8&psc=1 I just layed it across the lowest point on the underside of the fwd and aft corners, right behind the LED openings. Mine is for accidental strikes, not sure how long it would last for frequent "On Purpose" strikes.

@MattYamamoto100 3 года назад

Thanks! I think that would work well for covering the rails, but I think it would get worn through on the first quickstop. If not doing quickstops or any curb tricks...i think this would be a solid option. Thanks for sharing!

@oldretireddude 3 года назад

@@MattYamamoto100 I've actually used it on all the high points of my Pint. If it rolls over, on a somewhat flat surface, this trim is the only thing touching the ground. The only exception is if laying upside down the very front and rear footpad edges are vulnerable. Hasn't happened yet. I ride with a fender, it is also protected. I don't do tricks so the I'm not rubbing on the underside of footpads.

@usuallydopesvsc 10 месяцев назад

I actually like doing quick stops at slow speeds, I just treat it like a indo board and do a quick lil leg pump before the stomp to have enough force then just pull my foot off. I do it at crosswalks all the time after coming to a stop or almost a stop.

@toestdsoldier5316 2 года назад

Draggin tail spark bumper might work

@AgnesRiley 2 года назад

Hi Matt, cool video. I’ve actually been doing the quick stop, probably because that’s what my friend’s son taught me. But now I’ve fallen twice because the board slips after stopping. On Sunday I broke my foot, so won’t be riding for awhile. But it’s a good time to figure out how to fix this issue. Ideas are welcome from anyone.

@MattYamamoto100 2 года назад

Bummer to hear that! If the board is sliding out from under you, maybe you're taking your front foot off too late, which is keeping the sensors engaged. Get well soon!

@BlueForceSabers Год назад

Yeah man, sounds like you didn't lift your front foot enough to disengage the motor. Move your back foot closer to the rear to put a bit more weight on the backside of the board. When you shift your weight to the rear, your front foot will automatically want to come up and the back of the board will hit the ground. The only thing that might happen is the tire will spin a bit but shouldn't kick out on you at all.

@dannybanani3164 3 года назад

so one thing i was wondering do you have simple stop turned off for this or have it on?

@SnowyBlizzard 2 года назад

I just got my gt today… first Onewheel ever, and honestly it doesn’t wanna let the tail down at all🤣

@BreakinMoon 2 года назад

Same here. first onewheel ever. Got it last Wednesday. I'm gonna try this with it. Let me know if you are successful. Heel lift feels so awkward and doesn't always work, might just be me tho

@SnowyBlizzard 2 года назад

@@BreakinMoon I tried a couple times and the closest attempt was me slamming the tail on the ground and my other foot was off the board but i shot forward, I think I was off center so my body flew off but the last couple days I was just traveling and trail riding, so maybe I’ll try again and update you considering trails made me a LOT more comfortable with my board!!

@MattYamamoto100 2 года назад

Keep at it. It feels awkward at first because you have to really use your body weight. Congrats on the GT!

@SnowyBlizzard 2 года назад

@@MattYamamoto100 2 weeks later and I can confirm that it gets easier

@BreakinMoon 2 года назад

@@SnowyBlizzard I finally got it down over the weekend

@BlueForceSabers Год назад

Great tutorial! This is the only way I get off my board. It's a very consistent way to get off. The heel method is terrible. I've seen so many people fall trying to do it, just for the simple fact that your unstable while still, compared to moving. The quickstop can still be done even without distance or much speed. Ride with your rear foot a bit more back, so you can get more weight to that side. If you don't have much space, a quick push forward than quickly backwards will also get your momentum in the correct direction. Just practice a few times to get the feel. Float On!

@bobbarnes820 3 года назад

Matt, I've noticed when I quick stop my XR and then attempt to move forward, the motor just simply will not turn on and the nose just plants itself on the ground. Sometimes, it might take me six or seven tries to get the motor to engage so I can travel forward. Any ideas why this might be happening? My board is a week old. Thanks, Bob

@MattYamamoto100 3 года назад

Hey sorry for the late response. If you haven't worked this out yet, then I'd say it's your shoes not engaging the sensors. Try different shoes first...if that doesn't work, some have had success by putting small felt pads on the board to help with sensor engagement. Hope that helps!

@inactive67 2 года назад

Mine XR does this also, I have to toggle power its not consistant but today I got an over amp reading alert on my phone. it was also 42 ish and tire pressure was a bit low and ironically my board i also a week old.

@mattvadenais8585 3 года назад

Sweet Powell Peralta sticker

@MattYamamoto100 3 года назад

Thanks! Bones Brigade! Lol

@Tatad3 3 года назад

I like the Onewheel neon sign! How much to get me one 😂??

@MattYamamoto100 3 года назад

Thanks man! Maybe I'll do a quick video about it! It's super easy.

@yeesan6684 2 года назад

Who's here from chael

@emilamor 3 года назад

Do I have to turn off Simplestop first to do this? Is yours on or off?

@MattYamamoto100 3 года назад

You can do this with simplestop on. :)

@emilamor 3 года назад

@@MattYamamoto100 Oh cool! Did you turn on yours for this video?

@ykcil 3 года назад

Is the pint still worth it in 2021? Don't wanna get it just for them to announce a new one at the end of the year you know?

@marcmazzella5575 3 года назад

Nice vid. Just stomp that back foot like you’re killing a big bug lol.

@norbelsemaj3870 3 года назад

We need new Onewheel pint Video . For Favor

@UFOSPACEMAN Год назад

Does this work on GT?

@MattYamamoto100 Год назад

I haven't ridden a GT, but I don't see any reason why it wouldn't. The GT is more powerful, so you may have to lean back harder to stop...but the same principles apply

@BlueForceSabers Год назад

Sure can, just need a little more weight backwards because it's a bigger board.

@diegosaavedra3530 2 года назад

Hey Matt is being long time since the last 5:00 Friday's!! More than a year!!wath happens

@BOTzerker 3 года назад

Get a 3D printer and print your skid plates using PETG filament.

@MattYamamoto100 3 года назад

3D printer is definitely on my list of things to get!

@Vesta_the_Lesser 2 года назад

My pint would stop when I went backwards on it, but the XR just keeps going : ( You put the tail down and the wheel skids out, won't stop

@BlueForceSabers Год назад

The Pint has SimpleStop, XR does not. You need to put more weight on your rear foot. It works on all the boards. Bigger board, more weight on rear foot needed.