How To Recover Recondition Dead LEAD ACID BATTERY 2024 

I hope it will be more useful for you now explaining the steps as you can see in the video: - check the battery with a 12 v bulb (the bulb does not light up - so the battery does not work) - unseal the battery with a cutter to reach the openings of each compartment. - remove the liquid inside with a syringe (if it still exists) - wash each compartment with hot water several times (depending on the color of the water removed) - leave the battery with the holes down to drain and dry, in my case it was 4 hours - fill each hole with electrolyte solution for batteries (a little above the lead) - I connected the battery to a charger - electronic rectifier with screen (so that every visitor can see the voltage) - in my case, this electronic charger - rectifier with screen was not useful for charging my battery, it had a very low voltage. Later I found out that most chargers - electronic rectifiers are not designed for such a thing. - in my video you can also see in the frame a charger - mechanical rectifier (old model), I managed to charge the battery that I reconditioned - and finally I reconnected the 12 v bulb, and it turned on. I hope that the video and the answer to your message will be useful to you. Thank you!