HOW TO REFILL YOUR PRINTER INK CARTRIDGE & SAVE MONEY. EASY STEP BY STEP INSTRUCTIONS. 

Thanks so much! I appreciate your feed back. I hope this was off some help to you

Excellent! That’s great you got it to work. It can be so frustrating. Thanks for checking out my video and commenting.

I know your video has some years since filmed. But the most effective way to fill those, is with a dedicated machine, as i have.

Great tip!! Thank you

@@VanzHumbleHome It works on the favorite "Pilot G-2" ink pens. Slide the needle past the wax top cover and add ink to near empty bottom tube. I will admit however that's going to result in less viscous ink during use. I can't control the formula but treat it like a fountain pen. Let sit to dry for 30 seconds or blotter paper. In the 70's, we actually were taught to right like the constitution was written, except no turkey quills. I is cheaper than buying a 10 pack of G-2 pens with a 0.7mm tip for $18. $1.50 in ink was my calculation for refilling 12 pens & 3 magic markers! Have a luck one! DK

Glad it was helpful! Thanks for your comment.

Of course! Thanks for checking out the video:)

That's great that you found it to be easy! It's nice to know that I can be helpful! thank you for watching.

Thank you! I appreciate your feedback.

That’s awesome that you found a way to make it work! Save money too!! Thanks for sharing your experience. I hope ppl will see your comment and get theirs working as well.

@@VanzHumbleHome Thanks. It was my first experiment. Thank God it succeeded. Plz do not forget to put a piece of small transparent tape over the hole where you put the injection

@@VanzHumbleHome Everytime the printer is not printing, first dip the cartridge head in very hot water ( not the full cartridge, only its head) for 6 to 7 minutes, then take out the head, rub it over a piece of tissue paper. If lines emerge over the tissue paper, it is ready to print. No need to fill it with ink. If no lines emerge, leave it in hot water again the same way. It usually starts printing. Fill it with ink if it does not. Always put boiling water in a flat glass bowl then put the printer head in it. Never boil the printer head. If you do not put the ink in the printer cartridge the way suggested in the video above, the catridge will backfire the ink over your face, clothes & table. This ink can be removed with common white clothes bleach from skin& clothes both

@@VanzHumbleHome Also never put the syringe with the needle in the plastic ink bottle. The needle punctures the thin plastic ink bottle. Put the syringe without the needle in the plastic ink bottle. Fill in the ink and then place the needle upon the syringe

Thanks for the compliment:) the music is pretty cringe I admit. I get lost in all the options and end up making pretty random choices. Sorry about that. I hope this vid helped u save some money on ink at least!

Glad it was helpful! Thank you

Thank you, I am glad you liked it.

I am glad to hear it! Thanks for watching.

Thank you ☺️ I’m happy to hear you liked it.

Any tips?

Nice! Be prepared to sabe some money 💵

Sabe? 😂 I meant save

Thank you so much! I’m glad you enjoyed:)

Ofc! Thank you for watching and commenting!

Hmmm…. I’m not sure, try Google.

Glad I could help!! Thank you

Amazon. I thought I put a link in the description, I’ll have to update.

Hmmm…. Maybe power down and restart/ reset it. I hope that would help. Do you still have the manual? You can usually get the Manual on line as well. I would start there. I hope you get it figured out. I know what a pain printers can be.

I know this is way too long of a reply. If this still persist, hp doesnt recognize refilled cartridges. Its not a problem anyways. It would still work.

I m als facing the same problem ? Pls help me

D Hi there! Did you found the problem I have the same. I filled out my cartridge but still didn't print. And it said the black ink still empty even it's full. Thank you

​@mariakochelorov1099 it doesn't work . Hp chip is only recognized 120 prints . So after that .. hp disable the chip and the cartridge no longer works..

Lol, thanks:) I wasn’t sure about it but I did it anyways.

Of course! I hope this helps you save a bit of money. Thank you for watching!

Hi there, yes, I think it would still work just about the same. It may be slightly different but for the most part fairly similar. I would at least try.

Sometimes you have to clean the cartridge on the bottom. I put it in a very shallow amount of hot water. Just so the bottom of the ribbon on the bottom can soak. You will see where the ink comes through. Then I dry it really well and it usually is the problem. I hope you get it working! I know it’s a pain. Also, if you keep your printer on stand by mode the ink will fry up faster again if you don’t use it often. It is better to shut it off bc it should close the cartridges and they won’t fry out as fast. I rarely use my printer and I have to clean it almost every time I use it.

Thanks! I’m glad it helped.

Mine did the same thing. I’m not sure how to reset it but try turning it off and then back on again, maybe that will help.

Just cover one of the points

@@yabsera-d4628what ports?

Glad it helped!!

Ummm…. Ran outa ink. Refill like this is less expensive and less wasteful than purchasing new cartridges each time they run out. Hope that helps!

I Can't exactly remember, we moved and I have a new printer &it's just as much of a pain n I am wondering the same...

@@VanzHumbleHome so it's pointless getting the ink kit

@@iiparachuteregiment8800look up a video for your particular machine.

@davidwayne9982 Yes 3 holes and your correct on the colors.

Yes. Unbend a paper clip to stick in the hole to identify the color.

@@robert50173i used a toothpick in each hole. But the cartridge was so dry. I really had to shove it in. After filling with only 5ml it seems to be flowing out the bottom. So I had to syringe some out. In the video she used around 4ml it looked like even though she said ten. So I’m questioning what I did wrong. 😂

😂 that’s great! Thanks for letting me know! I’m glad I could put a smile on your face 😊

Possibly, thank you.

True!

Addicted…