How to refurbish an old goalie mask to be like new

Подписаться 4,8 тыс.

Просмотров 2,8 тыс.

50% 1

T-Shirt Shop: www.etsy.com/shop/SportAntic
1oz Goo Gone: amzn.to/3PQuOCb
Gel Coat Kit: amzn.to/3ZOhUtf
Automotive Primer: amzn.to/3ZVfA3I
High Performance Enamel: amzn.to/46Ich1O
Acrylic Lacquer Clear: amzn.to/46tADNg
EVA Closed Cell Foam 1/2Inch: amzn.to/46PDArf
EVA Closed Cell Foam 1/4Inch: amzn.to/3Fdt8xN
Contact Cement: amzn.to/46Jb7mS
Chin Cup: goalieparts.com/products/goal...
Double Sided Tape: amzn.to/3RTupBA
Goalie Mask Hardware: goalieparts.com/products/goal...
Goalie Mask Hardware2: www.goaliemonkey.com/bauer-go...
Neoprene washers: goalieparts.com/products/whit...
Metal Goalie mask slider clips: goalieparts.com/products/goal...
Back Plate Straps: amzn.to/3ZRMfHe
Amazon links are affiliate links
GoPro Goalie Uzi: Detailed Paint Job: • How to paint a goalie ...
• How to paint a goalie ...
0:00 Intro
0:45 Remove hardware, foam and glue
3:30 Gel Coat
9:55 Prime, paint, and clear coat
13:45 Add cage, and hardware
15:51 Add new foam
21:50 Backplate Buckles, straps, and foam
24:40 Trying out the mask

Спорт

Опубликовано:

15 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@GoProGoalieUzi Месяц назад

Bro not bad at all!! Thank you for the shot out 😀❤️

@markfitzurka9995 7 месяцев назад

It is well done for a backup mask. And now a primary one.

@NerdrageHockey 3 месяца назад

I previously took my old mask and painted it as well. The links below your video are worth their weight in gold as I scoured the internet looking for refurbish parts trying to figure out where to get hardware and foam. Ended up paying way to much for it. My only advice is at 13:47 you go from clear coat to "Paint is done" where I added a curing and buffing step. I let the clear coat cure for a couple of days and then got out my buffer, hit the polishing pad with some Meguiars polishing compound and took my time. It put a high gloss shine on it. I did mess mine up by trying to cure it in the sun which stained the clear coat I was using a yellow but with the theme I was using is fine. I wasn't using mine as a back up more an art piece to put behind me in zoom calls.

@NerdrageHockey 3 месяца назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-s-ZRdfM0Qeg.html if you are interested in what I did, also beware I have intro music as I am still playing with my channel trying to be artistic to make up for all my bad hockey playing.

@netmindr32 4 месяца назад

Great video! I've been looking for some insight on how to restore my helmet. This was perfect!!!

@Dbaxter261 2 месяца назад

Contact cement should dry before you stick it together.. just a heads up nice work

@reidcooper33 11 дней назад

what grit sandpaper did you use in the beginning when you were using the power sander?

@sranda9647 3 месяца назад

How does it handle sweat absorption in regards to weight and mold from water/sweat after use?

@user-sh3ni6wf2j 5 месяцев назад

from where did you buy metal bucles?

@Dbomb81 6 месяцев назад

The ol itech aka “the widow maker”.

@burrheadjr 6 месяцев назад

The widow maker was the Itech 1200 and 1400s were made of plastic. The Itech Profile 4000s and above (like in this video) were made from fiberglass and were decent quality. Infact, Bauer bought the design and modern Bauer Profile 960 are based on this Itech design

@Dbomb81 5 месяцев назад

Right but that whole line that was shaped like those are affectionately called the Widow makers@@burrheadjr