How to Remove A 2015 - 2020 Ford Mustang Tail Light - Change Replace LED Brake Taillight Replacement

Подписаться 130 тыс.

Просмотров 50 тыс.

50% 1

A video tutorial on how to remove and replace the LED tail light / brake light assembly on a 2015 - 2020 Ford Mustang.
More automotive DIY information available at www.ProgramYou...
Perform the following steps to remove / replace the LED tail light or brake light assembly on your Ford Mustang.
1. Turn the Mustang engine off.
2. Open the trunk.
3. Remove the two "T" handle retaining nuts and the two plastic rivets.
4. Pull the carpet back to expose the rear of the LED tail light / brake light assembly.
5. Remove the three 10mm nuts securing the LED tail light / brake light assembly.
6. Disconnect the tail lamp / brake lamp connections.
This video will show you how to change - remove and replace - the taillight and brake light housing assembly on the following Ford Mustang models:
2015 Ford Mustang ( EcoBoost, GT and Premium )
2016 Ford Mustang ( EcoBoost, GT and Premium )
2017 Ford Mustang ( EcoBoost, GT and Premium )
2018 Ford Mustang ( EcoBoost, GT and Premium )
2019 Ford Mustang ( EcoBoost, GT and Premium )
2020 Ford Mustang ( EcoBoost, GT and Premium )

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@jrhamilton4448 3 месяца назад

A bit of advice so you dont lose your interior carpet retaining clips, place a piece of painter's or masking tape overtop of the rounded head of the clip and tape it to the pry tool before you pop them loose so you don't send them flying across the room like I did.

@Falciase 3 года назад

Clear and concise! Thanks a ton.

@PYR-Auto 3 года назад

You're welcome!

@RichM0410 10 месяцев назад

BRO! That is PERFECT! Thank you. Water is not draining on 1 side and this most definitely helps👍

@PYR-Auto 10 месяцев назад

Glad it helped!

@Senbonsakuraink 10 месяцев назад

Thank you so much. I was able to changed my taillight in less than 20 min. Much appreciated 🙏🏼

@PYR-Auto 9 месяцев назад

You're Welcome!

@EnsignFuntimes 9 месяцев назад

At least it’s easy but that’s annoying that you need a whole ass assembly

@stephendodd587 Месяц назад

You walked me right thru it, fixed, thx!

@PYR-Auto Месяц назад

You're Welcome!

@jkoolii 3 года назад

i cannot unplug my lights for some reason

@jkoolii 3 года назад

yes im pressing the clip down

@dannyjaouhari8429 Год назад

Same here

@adrianziomek2296 6 дней назад

Thanks

@PYR-Auto 6 дней назад

You're Welcome!

@Nostalgic_95 3 года назад

Thanks man helped heaps 👍

@PYR-Auto 3 года назад

You're Welcome! Glad it helped

@Lozadacompany Год назад

Thank you for the tutorial 🎉🎉🎉

@PYR-Auto Год назад

You're welcome!

@MrMISTAmarcus 3 года назад

So replacing the whole head light will fix the privlemc

@RoyaleAutoSalonRaleigh 2 года назад

Great video👍

@PYR-Auto 2 года назад

Thanks 👍

@joseaugustoramirezdiaz1528 2 года назад

Tienes mi respeto buen hombre , saludos cordiales.

@PYR-Auto 2 года назад

gracias

@salwansalem8099 3 года назад

I have a 2015 mustang the brake light is out my question is do you is there bulbs to replace or it has to be replaced the whole assembly? Thanks in advance

@PYR-Auto 3 года назад

I believe on a 2015 you have to replace the whole LED assembly like the one in the video

@salwansalem8099 3 года назад

@@PYR-Auto thank you for replying

@brian8431 3 года назад

I was just told the same thing by the Ford dealer, my blinker went out in the rear and they're telling me that I have to purchase a $600 tail light and $150 for install because it's an LED. Who is the fucking genius who came up with that at Ford That's what I want to know and I'd like to punch them in the jaw

@salwansalem8099 3 года назад

@@brian8431 you can get online whole LED a lot cheaper around $200 dollars and you can do it yourself car dealer is a rip off good luck to you

@brian8431 3 года назад

@@salwansalem8099 oh really? That's great thanks for the information. Do you happen to know if I find somewhere to order them now do I have to take apart the entire tail light assembly? Because I hear opening headlights are tail lights can go very wrong very quick if you don't know what you're doing

@macyspradlin2128 Год назад

I have a 2014 and the rear driver turn signal is going out. Bought the bulb but obviously there’s no way to take the housing unit apart. Am I going to have to buy a whole new unit?

@PYR-Auto Год назад

not sure how the 2014's are

@joshuagibson36 Год назад

How do you change the light bulb in the tail light?

@PYR-Auto Год назад

on these LED style tail lights the whole assembly needs to be replaced, not just the bulb

@luissalinas4184 10 месяцев назад

@PYR-Auto so have to buy a complete assembly for 1 bulb thats not working?.

@lepton31415 10 месяцев назад

@@luissalinas4184 there isn't a bulb. it's all LED

@rrhippal 3 года назад

thanks! that helped. do you know if I can change just the bulb cover in a Mustang 2020? lights are still functional - brake lights and turn signal indicators.

@PYR-Auto 3 года назад

You're Welcome! I'm not sure on the cover but I would guess not as it seems most LED set-ups are sealed units

@nickimcb3842 2 года назад

Maybe from a very professional company but no, people are under the impression that light covers are replaceable they don't even sell those separately.

@OrdainedPrepper 2 года назад

My 2017 Mustang GT has one rear taillight bulb blown. Is it easy to just change the bulb after removing the light assembly?

@PYR-Auto 2 года назад

The whole light assembly will need to be replaced

@ccasinoo5909 2 года назад

Dumb question I tried splicing my headlight wires. For some reason both my headlight and tail light went out. Are the wires connected from headlight to taillight? Or is this a completely different problem

@PYR-Auto 2 года назад

Not sure on that