I never knew such a tool existed until I saw your video; thanks! I've ordered one after I put soapy water on the tube and a bubble formed at the valve.
Good, thanks for sharing. I tried to fill my tire because it was low, then it got worse, I tried another air pump, I put pressure on the tube, but it wouldn't hold. I got to my destination by pushing my bicycle. I have heard a long time ago to lubricate the valve. I sprayed some lube in the valve and I tried a third air pump. It was a very good pump, it took me about 6 to 10 strokes, and it fixed my tire. From now on I am going to get one of these tools and keep it in my bag every time I ride my bicycle.
I would recommend getting the tool that is longer like 4 inches so you can take out the valve stem while the tube is still in tire n on the bike, with the one he is using in video it will hit the spokes on your rim as you turn it This comes in handy also when putting green slime in tube to fix leaks, one time the plastic valve remover tool with green slime bottle broke n wouldnt take valve stem out cause it was in their too tight, i had to use a steel valve stem remover tool n some skinny pliers to get it out, i recommend keeping a pair of skinny pliers on your bike also.
Thank you most people are saying you can't remove some valve cores because they are showing how to add sealant to tubes so if you get a puncture on a trail it will seal.
I would recommend getting the tool that is longer like 4 inches so you can take out the valve stem while the tube is still in tire n on the bike, with the one he is using in video it will hit the spokes on your rim as you turn it This comes in handy also when putting green slime in tube to fix leaks, one time the plastic valve remover tool with green slime bottle broke n wouldnt take valve stem out cause it was in their too tight, i had to use a steel valve stem remover tool n some skinny pliers to get it out, i recommend keeping a pair of skinny pliers on your bike also n a bottle of green slime not out of expiration date n extra valve stems- one time green slime messed up my valve stem n it wouldnt air up i had to put another valve stem in, bottle of green slime saved me a few times especially on my 70 pound e bike
The end opposite to the one we are turning is flat in some cases and have a pin like structure as in your case,are both compatible with all schrader valves of four wheelers, motorcycle and bicycle? The replacement valve pin cores I have are flat at one end.
Hi there what do you do if the valve wont come out. No air getting in or out as silly people at my scooter company put green slime in tube during maintenance. Even when I press little valve inward no air gets out. Thanks.
So if I cover the hole with a finger and I still hear air leaking , that would mean the leak is coming from where the valve stem connects to the inner tube? Otherwise the air leak would stop if it was in need of a repair such as you showed? Is that correct?
I ride my bike often. Probably more often than most. I was preparing to do my late night bike ride. I heard air coming out of the valve stem!!!!!!! I have no clue why this happens on a brand new inner tube? Does anyone know why does the valve stem go bad on a inner tube? I have had so much trouble with flats. My spokes were puncturing my inner tube so I had to buy a wheel strap. Too many issue. I just want to ride my bike and go.
I bought new cycle but after few days tube gas leaking without reason. There has no leakage spot but why gas leaking. When i pumps the tube after 1/2 days it gets back.
@@hp11208 ok... so there's nothing wrong with the pump ? Coz whenever the cycle mechanic uses a machine to pump , it won't leak! Once if I use the pump and boom the tyre goes flat within 8hrs