How To Remove A VERY Stripped Lug Nut - When All Tools Failed - Guaranteed

Подписаться 40 тыс.

Просмотров 166 тыс.

50% 1

How to remove a broken or stripped lug nut when extractor removal tools failed without damaging your rim.
❗️If you find this video helpful, I would appreciate a $uper Thanks that can be found below the video.
Hot Tip: Use a Torch for Broken Stud Removal
• Hot Tip: Use a Torch f...
Lug/ Wheel Stud Replacement - Fast & Straightforward - Any Vehicle
• Lug/ Wheel Stud Replac...
Save money and learn how to bleed brakes by yourself on any car
• Save Money And Learn H...
Brake Burning Smell? - Frozen Brake Caliper Replacement on Any Car
• Brake Burning Smell? -...
Brakes Dragging? And Not a Frozen Caliper?
• Brakes Still Dragging...
💰Save money on other vehicle maintenance and repairs :
Top 3 Reasons Why Your Car Won’t Start
• Top 3 Reasons Why Your...
Pittsburg Harbor Freight Engine Support Bar 1000lb. Capacity - Review& Install
• Pittsburg Harbor Freig...
Cheap Way To Check For Bent Valves Without Removing Cylinder Head
• Cheap Way To Check For...
How to properly gap spark plugs
• Car Misfiring? Running...
Proper way to install valve stem seals
• Proper Way to Install ...
Hot Tip: Broken Stud Removal
• Hot Tip: Use a Torch f...
Remove a Broken Stud Below the Surface
• Remove a Broken Stud B...
Oil Bearing Clearance measuring - simple to understand video
• Oil Bearing Clearance ...
How to properly gap and install piston rings
• Piston Rings Replaceme...
How to check cylinder head or block deck for warpage
• Cylinder Head Warpage ...
Why is it important to replace the timing belt at the manufacture’s intervals
• Check and Change Your ...
Fast & Easy way to lap “grind” intake and exhaust valves
• Seating Intake & Exhau...
Replace Front Exhaust Flex Pipe on most 4 or 6 cylinder cars - Cheap Way
• Replace Front Exhaust ...
Better Throttle Response in Minutes
• Better Throttle Respon...
⁉️QUESTIONS
If you have any questions or I missed something, comment below and I’ll answer and try to help you out
If you find this video helpful, like it and subscribe to my new channel. I’ll have tons of videos on all kinds of car and truck repairs in the
future.
⚠️Disclaimer:
The videos on Motorcarnut channel are posted with informational purpose only.
Information posted in this video does not guarantee any particular result. Use this information provided in the video with caution and at your own risk. It is the responsibility of the viewer to take this risk.
Motorcarnut is not responsible or liable for property damage, any loss damage, or injury related to or resulted from information posted in this video.

Опубликовано:

10 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 106

@alexjulius69 Год назад

Mafia boss gave one hell of a lesson, thanks.

@Motorcarnut Год назад

No problem!

@floopglandikis8453 Год назад

I'm not watching this video because I want to watch this video, but it's exactly what I needed thank you

@Motorcarnut Год назад

Lol, no problem, thanks!

@patrickkennedy8706 4 месяца назад

Good job. I’m in a fix, been looking at these videos regarding a spinning lug - yours is by far the best. No stupid macho hot rod music that they all have, to the point, got it done and here’s how. Thank you.

@Motorcarnut 4 месяца назад

Thank very much for the feedback truly appreciated!

@thehamelsduck1600 Год назад

Wait I thought all tire guys had to use that Ugg Aaa Dugga NASCAR Impact gun on the tire? Apparently thats what the guys who installed my daughters tires last time did. Very good vid and tip. It's not cool when your baby girl is stuck on the intestate with 5 rounded off lugs. Thanks this was the only thing that worked.

@Motorcarnut Год назад

Thanks! No, every nut and bolt on a vehicle has a torque spec and the lug nuts are no exception. Tire guys barely have any automotive knowledge and use impacts because they are fast but don’t care if you can never get the lugs off again.

@jenniferelliott9368 Год назад

AAA woman here and yes I use an impact. However, I'm always very careful not to over tighten the lug nuts. It's mostly the MEN who don't pay attention to the torque that should be used for each vehicle. They end up over tightening the lugs, stripping the lugs, they misthread the lugs on, and so on. Which can and will lead to even bigger problems. These guys that do this are trying to be the fastest...WRONG. I don't want to be the fastest! I want to do it right the first time and send my members off safely. As a former RN I have seen more than my share of vehicle mishaps. Also don't let them use the compressed air impacts either. Most shops use them because they are able to do the job faster and make more money. I'm with this gentleman when he says if you see them pull out an impact gun of any kind...run! Unless you see them grab a Manuel or have a chart that tells them the torque and you see them adjust it. Hell ask to watch them adjust it and make sure it's right yourself. Better yet learn how to change your own tires in case of a flat. It's not hard...at all! Good luck and stay safe!!!

@Motorcarnut Год назад

Well spoken!

@crlzm Год назад

We use impact guns with attachments on the gun so it doesn’t break the lugs n then we torque the wheels and boom done and safe idk what this man is talking about🤷‍♂️

@Motorcarnut Год назад

@crlzm I’m talking about people who don’t torque them at all! You do , good for you! Thats what I’m talking about.

@Vision-MileHigh 9 месяцев назад

" I don't want to use the word" Insinuates the word 😂💯

@Motorcarnut 9 месяцев назад

@Ajaxaxxess 4 месяца назад

Worked perfectly. Used an air hammer to walk the rest of the nut n stud off. Ty bud.

@Motorcarnut 4 месяца назад

Sure, no problem! Thanks for the feedback!

@dw3094 Месяц назад

I agree an impact wrench should not be used on lug nuts. Since you're always working on cars, I would like to get your opinion on this. I believe the main problem with stuck lug nuts and stuck wheels to hubs is the aluminium rims that are used today. Steel and aluminium do not go together well under certain circumstances. One being when you add salt, I think it gets a chemical reaction (Galvanic Corrosion?) that almost equals welding them together. I live in Minnesota and they use a lot of salt in the winter. I don't ever remember having this problem or I should say it was never this bad when all they used were steel rims. Let me know what you think? Do you notice the problem more with aluminum rims? Thanks, David

@Motorcarnut Месяц назад

You're a 100% correct. Most of the times the corrosion is so bad it compromises the wheel and hub. Putting a little grease between the hub and rim and some on the lugs goes a long way and avoids most problems especially in the salt belt areas like here in NY.

@eddietv1501 Год назад

Thank you for the tutorial. The instructions were very clear

@Motorcarnut Год назад

Glad it was helpful!

@mahdavimail Год назад

Crappy lug nut No wonder on Jeep. Tnx for video

@Motorcarnut Год назад

No problem, it’s not so much about Jeep but someone who over torqued it.

@petevaldez3254 Год назад

Thank u.

@Motorcarnut Год назад

You're welcome!

@mparylo 25 дней назад

Amazing video! What if! I broke the bloody small drill inside and can't get it out ?

@Motorcarnut 25 дней назад

Oh no! Maybe with a chisel?

@kassemrami Год назад

Thanks so much , exactly what I needed

@Motorcarnut Год назад

You're welcome! Thanks for the comment!

@Motorcarnut Год назад

@94grandmarquis 11 месяцев назад

WORKED... THANKS

@Motorcarnut 11 месяцев назад

You're welcome! Thanks for the feedback update!

@Bueller68 Год назад

Legit. Watched other BS vids on using sockets.

@Motorcarnut Год назад

Thank you! Appreciated.

@chefstone8178 Месяц назад

😅 you're funny.

@Motorcarnut Месяц назад

Thank you

@sexykrabz4185 Год назад

About to go buy a drill I’ve been trying to get a badly stripped lug out for about 2 months 💔

@Motorcarnut Год назад

This will work! Good luck.

@montakims 10 месяцев назад

7 months for me!

@lorihaire6459 9 месяцев назад

A couple of years for me. I’m curious why doesn’t anyone put grease on the lug nuts before putting them on in the very beginning? A friend of mine swears by it.

@Motorcarnut 9 месяцев назад

@lorihaire6459 Because lug nuts are supposed to be properly torqued dry with clean threads.

@blakehorton6306 Месяц назад

Impact is fine with a torque stick

@Motorcarnut Месяц назад

Most don’t use it

@blackred1032 14 дней назад

How much will a mechanic charge for this?

@Motorcarnut 14 дней назад

That depends how long it takes them and how much they charge

@Humester12 6 месяцев назад

what metal drill bit did you use? Cobalt, titanium, carbide? I am having such a hard time drilling the stud. Maybe mine is just too hard of a steel.

@Motorcarnut 6 месяцев назад

I used cobalt with no problem

@montakims 10 месяцев назад

Thank you!!

@Motorcarnut 10 месяцев назад

You're welcome!

@trutymeproductions5478 Год назад

Can you tell what type of drill bits you used since the lug is hardened. Carbide tip?

@Motorcarnut Год назад

The ones I have are titanium but carbide will work too.

@jrsbdhj202 8 месяцев назад

We use an impact all the time but only to tighten them on and then we torque them

@Motorcarnut 8 месяцев назад

Most people don’t, especially tire places

@tigerconway Год назад

good idea

@Motorcarnut Год назад

Thanks

@AFatherToTheFatherless Год назад

Will this work on a lug BOLT like on German cars?

@Motorcarnut Год назад

Absolutely

@FollowerOfChrist589 Год назад

This was very helpful thanks brotha !

@Motorcarnut Год назад

No problem, thanks for the comment!

@GTFOofHERE 6 месяцев назад

You skipped the most important part,when u removed it😂

@Motorcarnut 6 месяцев назад

Nut just fell off and removed the wheel

@wvmcc82 Год назад

I've got this same exact problem. With a Jeep. God their lugnuts are crap

@Motorcarnut Год назад

This will work, for sure. Good Luck!

@michaelislam9951 2 месяца назад

Why is it always a jeep dodge Chrysler with this same problem

@Motorcarnut 2 месяца назад

It’s not

@claframboise Месяц назад

They use lugnuts that have an aluminum cap over a steel nut.

@mattmgarza Год назад

This is helpful but is drastically oversimplifying it, in most cases. It's going to take significantly longer than that to drill out, typically.

@Motorcarnut Год назад

Depends, some longer some shorter. The videos about how to do it not how long it takes?

@user-jz1ht8ry2w 3 месяца назад

All wheel places should use torque wrenches to tighten. Consumer always pays!

@Motorcarnut 3 месяца назад

Exactly but they don’t

@frankfencepost13 Год назад

So your on the road with no plug in or electricity

@Motorcarnut Год назад

You’re not supposed to be on the road with extremely stripped lug nuts in the first place??

@mezenman 2 месяца назад

Battery drill?

@tykendrick800 Год назад

I never owned drill bits that cut this fast. What bits are those

@Motorcarnut Год назад

Forgot the name brand but their titanium tip drill bits.

@rileyjackfansmithandjones8238 Год назад

Thanks for the Titanium Tip TIP......my drill bits are Useless on a 2001 Ford Escape.....as are Every other Tool made to Man. I can fix piston and turbine Acft airframes and engines.....can't do even a simple repair on this Rig....hour Gig turns into 3 hours, and multiple busted crap. Strange thing is, just over 100,000 miles, but the engine runs like a sewing machine, and Plenty of Power.......the rest of the Rig systems are all in business for themselves. Got the car for free, to keep it in the Family,as a Grocery Getter....2 In Laws, and a Nephew sent it to me.....I think I've been Conned!

@Motorcarnut Год назад

Lol, no problem!!! Thanks for the comment!

@phillylifer Год назад

How do you replace the stud?

@Motorcarnut Год назад

Just hit it with a hammer and punch if it’s level with the hub. They are pressure fit.

@anjan21670 4 месяца назад

What's that spray ??

@Motorcarnut 4 месяца назад

Just some wd40

@lennyface5540 7 месяцев назад

Dude I gotta take my tire off to change my battery I guess years of doing that and probably someone used an impact to tighten them (not me I don’t even own one) well there’s literally two nuts like those…

@Motorcarnut 7 месяцев назад

This method works if you have no other choice

@lennyface5540 7 месяцев назад

@@Motorcarnut right on

@masihmoh6395 7 месяцев назад

Don't gotta do this just hammer in the socket into the lug nut and loosen. You might lose the socket that's about it. My socket came lose once I got the lug nut off

@Motorcarnut 7 месяцев назад

This method is for even when your method fails.

@masihmoh6395 7 месяцев назад

@@Motorcarnut it won't fail 💯

@Motorcarnut 7 месяцев назад

There are nuts sometimes so rusted that method won't work. You don't think I've tried that?

@masihmoh6395 7 месяцев назад

@@Motorcarnut this method in the video should be the completely last option when everything else fails. There is alot of other options than cutting into your lug

@tallibanbaby2x502 Год назад

I drilled straight through and still stuck🤦🏿‍♂️

@Motorcarnut Год назад

Try hitting the drilled lug nut with a hammer and chisel

@donmckay7742 10 месяцев назад

man hoping i don't have to do that lol. change my own tires very year, take it in for only an oil change, then get a bill for new nuts and rotated tires with out asking. damn douche bags feels like they welding one of the nuts on. But thanks for the last resort option.

@Motorcarnut 10 месяцев назад

No problem, because the use a impact gun instead of torquing them to manufacture specs.