How to remove an ice maker from a KitchenAid Refrigerator 

Very helpful video. Thank you for posting. This is exactly what’s going on with my icemaker.

Thankyou, removed mine and it was a broken wire. Really appreciate you making the video saved me hundreds of dollars.

Thanks for your video. Same ice maker goes in many different frig models. I would add that if the coating on the ice tray is intact you may think about repair. The coating (teflon???) on mine was badly peeling off. Entire unit straight into the garbage after recording the m/n.

Thank you for this video. It helped me remove my unused ice maker.

Thanks for the step by step removal. Your description is exactly my problem, corroded heating element, plus the non-stick coating on the mold is failing. Ordering a new ice maker. Thank you.

My bar has broken, so ice just fills the whole freezer up 😂

Hope you're still kickin. I used your video to remove mine. It was noisy and never used it anyway. Thanks.

You don't have to remove the two top screws. Just loosen enough and lift up.

Thank you for this video! I never wanted an ice maker, it's a big waste of space. I plan on doing this, but are there any other steps to take, to seal up the any hoses or the electrical plug? I never had the water line connected to my fridge, because I really didn't want an ice maker and couldn't find a fridge that didn't have one. Thanks for this great video!

How do you clean it? Can you soak it?

do you have to put a cover over the connection if you are going to totally disconnect it, if so where would you get one? Thanks

Thank you, very helpful video.

hello, my kitchenaid refrigerator KBFS20EVMS13 is frosting so much than some times i'm not able to open the freezer because there is ice in the reels, i change the gasket already, check and clean the whose drain( thanks for that tutorial) and the problem continues.

Do you need to turn off the water supply if you take it out?

Thanks for the video. I'm about to replace one of these. What camera are you using? The video quality is fantastic.

If you remove the ice-cube maker, what's the best way to seal the holes left by the screws?

I am having issues with my ice maker. It had been leaking but then started clicking. I took it out and let the freezer compartment come to room temp to see if the input was frozen. I put the ice maker back and now it just clicks. I am wondering if you have any ideas. Could this be the input valve not opening? Or what other things?

Do you have to shut the water off before removing the Ice Maker? It seems like water will come poring out when the ice maker is removed.

What screw did you use

Do you know how to turn off this ice maker without taking off. It is making too much ice

I can’t take the white plug off. Is there a trick

Can I just unplug it ? I live in a rental and don't want to remove it, but it is not hooked up to water and will still try to run at times.

I took that plastic panel off the end and it was full of ice!!

new ones have some stupid clip system on the top two mounts that I can't figure out to save my life

what

it would help to hear you speak