The best tool to remove stubborn spring bars is an Exacto razor knife. Especially good for watches with no or little room to reach the spring bar. You stick the tip of exacto blade with non cutting side to watch body and make the blade follow the inside edge to the spring bar ridge. Push outward and give a small twist to blade so to contract the spring bar tip. Careful to work away from self to avoid getting cut.
I can’t insert the spring bar tool in multi brand watches the size of tip is big so how to use that bro ? Any different in spring bar tool size ? Please let me know bro 🙏
Mine never broken and I've so far not hear of anyone else. I guess it depends what you are doing with it. The tips should not break off simply by inserting a spring bar. But thanks for sharing your opinion. Dave
I passed the fiddley stage a long time ago, I'm putting a deployant clasp on a watch and the band attaches to a small hinged piece that shifts when I get the spring bar depressed near the tiny little hole. I actually got it in place once then realized I'd done it upside down so I had to take it off. I sure like the Precitool. Hope I can find one. My respect a admiration for jewelers has certainly shot up. Very nicely done video by the way.
Great vid. Best part : the illustrations in 3D cad! I know it's a lot of work, but would you consider doing a video on how to measure the spring bars and bezel lugs on the watch for replacement. I'm on number 3 try to get the right pins, and there are no accurate tutorials on what the measure. One youtube vid tells you to measure to the ends of the uncompressed spring bar, but I think it's better to measure the watch bezel lugs. Can't tell if spring bar lengths are based on uncompressed or compressed length (that would be a PAIN to measure!) Anyways, thx
As I understand it (not saying Im right here). The sizes of the spring bars refer to the overall length.The bar itself should be slightly longer than the lug width, in order to go into the little holes. So for example if you have 10mm between the lugs, a suitable bar may be 12 mm or so end to end. allowing 1mm to go into each hole. You also want a little tension in order to keep it there, so perhaps even a 13 or 14mm length would fit when compressed. Obviously when compresses it would need to be less than 10mm or you'd never get it in. just my own observations (I'm not a watch expert). When I've been to my friends shop, who does dozens a day, its usually down to a little trial end error, to get a snug fit. But thats easy when you have a huge stock of pins. I hope this helps. Dave
I'm a bit of a watch collector myself, and that looks like a great spring bar tool--solid and made to last. I'd add that other good tool(s) for minor watch repair are those made to open the watch back for battery replacement; some backs snap in, others must be unscrewed with a special wrench. Here in the states, a lot of places replace watch batteries which really have no business doing it--they either use the wrong tool or they're careless and damage the watch back. A skilled jeweler is probably one of the best professionals to do minor watch alterations--because they have an eye for detail. I have all the tools so I'm the one my family goes to for watch repairs.
Hi, can we install spring bar on smart watch that fits standard quick release pin? Say it fits 22mm quick release watch strap as standard, then we use 22mm spring bar?
As long at the watch has pin holes, then a suitable size spring bar will work. Spring bars are usually referred to by the lug width they are designed to fit. But in reality the bar will be longer to allow for it to expand into the holes. So for a 22mm gap, buy "22mm" bars, But in reality they will be a couple of mm longer . Hope this helps. Dave
Thanks for the comment. Yes these tools work best with the little grooves on the spring bar. although I have used this very one with some single sided spring bars, that don't have groves at all. All a matter of personal taste, but this little tool is quite useful.
My days of using a blunt penknife are now over, I bought the correct tool and now know how to use it, one thing before attempting to use it on expensive watches practice on an old junk watch. cheers "H"
Mr. Wilson (or any other helpful person...), how do I know what size spring bar my watch needs? Is it the INTERIOR measurement between the lugs? I lost both spring bars so, I don't have them for referencing the new ones. I have the Precitec brand tool and lots of assorted spring bars...
Measure the inside gap between the lugs. That is the size you need. say 20mm. if you "buy" a 20mm spring bar. It is actually a few mm longer to fit into the holes. Hope this helps. Dave
Great video, nice illustration and macro shots. Very slick. Thanks for the info, I actually made one of these tools today in the shop, out of an old dental tool. :)
This is more of a plug for the tool itself than it is a guide to removing spring bars. It took over one half of the video before showing how to actually remove a spring bar.
Yes, it's a review of the tool. Showing it in use is to show you what it does and how it helps. That said, note that I don't sell the tool, or get commision from anyone who does. The idea is to show what it does and comments on its effectiveness, to allow other to make a more informed decision. Dave
Maplin in the UK sell it, but do read the user's comment: www.maplin.co.uk/p/rolson-spring-hook-remover-for-watch-straps-n32gc The "screwdriver" end on mine started to wobble after a few times use. P. S. Possibly, the version sold by Maplin is a cheap Chinese import.
+youtubister ..indeed there are a lot of cheap ones that look similar, but don't quite perform the same. This particular one as sold by Eternal tools is Swiss Made and decent quality without the name brand price tag. Dave.
Thanks. I had bought a kit that had nosheet.to.tell me what the hell they were. I reattached a vintage watch strap just now without having to go back to the jeweler.
+perfect7liberty Precitec are Swiss made watch tools, by "Horotec", who also produce Horoswiss and precitec brands. Dave. Horotec SA Av. Léopold-Robert 105b, Case postale 1023 2300 La Chaux-de-Fonds Switzerland Tel. +41 32 911 21 21 Fax +41 32 911 21 22export@horotec.ch www.horotec.ch
+Celtic Dreams You will find the exact spring bar tool (Precitec) in the Horotec on line catalogue.... Dave. www.horotec.ch/_files/HOROTEC_2013-14_CD_ANG.pdf
Hi Dave, great video. Does this particular tool cover most all watch bands? Any thoughts on the Bergeon tool? I know it has loose pieces but thought I would check I. Case there’s something new out there. Thank you sir!
Thanks Dave, sorry I didn’t word that very well. I was curious if you had ever used the Bergeon tool. I assume the Precitec might be your favorite over the Bergeon?
Scott Leibs Thank you. My videos do take a lot of work, but they do seem to be well appreciated. Thanks for the comments, they are appreciated too. Dave.