How To Remove And Replace A Kitchen Faucet

Подписаться 46 тыс.

Просмотров 583 тыс.

50% 1

Here are some of the tools that get it done home repair uses
www.amazon.com...
Moen Faucet Tool amzn.to/3lVC3Zt
Basin Wrench amzn.to/2CDgCL6
Step by step tutorial for the removal and replacement of the kitchen faucet. Easy step by step installation of a modern single handle faucet.
Due to factors beyond the control of get it done home repairs, it cannot guarantee against unauthorized modifications of this information,. get it done home repairs assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. get it done home repairs recommends safe practices when working with power tools, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of get it done home repairs, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not get it done home repairs.

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 329

@getitdonehomerepair 3 года назад

Check my playlist for the entire kitchen replacement ? ru-vid.com/group/PLTjc9tRPaZUZ19kHgJSXH5CtSjVW9BSbB

@tjjohnson4951 2 года назад

Do you want me a little too much to eat my

@avemaria4063 3 года назад

Thank you SO MUCH for this!!!!! You have NO IDEA how much you helped me out!! Bless you!!!!

@getitdonehomerepair 3 года назад

Glad I could help!

@PP-vc8fg 3 года назад

Fantastic video. You are very clear, and concise. Very easy to follow your instructions. Thank you!

@dchun273 3 года назад

Wonderful demonstration and explanations. Now I think I am ready to replace my kitchen faucet! Thank you very much.

@getitdonehomerepair 3 года назад

Glad it was helpful!

@dawitdejene9521 3 года назад

Thank you sir! You make so easy my first pluming project is a success. Thank you again you saved me $350!!

@getitdonehomerepair 3 года назад

Glad to help

@crazyspartan2991 3 года назад

I had both of the same sinks. This was soooo helpful. Thank you 😊

@hollyhopalong7405 4 года назад

Thank you thank you. Just switched out my faucet, the old one had a slow leak I guess, was a bear to get off due to previous corrosion and cross threading. Someone had attacked it with a pliers 😂. Had to take the Dremel tool to it. Once out, the new moen faucet was a dream to install. Now a nice new faucet , not an old eyesore with instruction “must keep bucket in x spot under sink”taped to the sink back splash. Will subscribe.

@getitdonehomerepair 4 года назад

Glad it helped. Thanks for your input and for watching.

@migueladames2550 3 года назад

Great video, really helped me when I changed my faucet. Thank you so much.

@getitdonehomerepair 3 года назад

Glad it helped

@steaksandchops 4 года назад

Thank you. Taking out the old one is half the battle. Super helpful!

@getitdonehomerepair 4 года назад

Glad it helped!

@gaucho5204 4 года назад

Thanks for the great video you're really great at teaching people I'm doing it right now with you I took it off with your help went and bought it and I'll put it on thanks a lot I really appreciate it I wasn't planning on doing that so I didn't look into it thank you

@getitdonehomerepair 4 года назад

Glad I could help

@BK411PHX Год назад

Great job with the instructions and video

@getitdonehomerepair Год назад

Glad it was helpful!

@joewilson5371 Год назад

Indicate what size wrench is required. Other than that, its an excellent demo

@pervezdurrani3421 3 года назад

Great presentation, May God bless you

@getitdonehomerepair 3 года назад

Thank you! You too!

@nancyvalentine9901 2 года назад

wonderful, clear precise video. Good job.

@getitdonehomerepair 2 года назад

Glad it was helpful!

@94ferraz 4 года назад

Good video vey Explicito you Teach well

@getitdonehomerepair 3 года назад

Thanks and welcome

@donovanj8840 3 года назад

This was incredibly helpful.. Thank you so much

@getitdonehomerepair 3 года назад

Glad it was helpful!

@ryansmith8944 3 года назад

Great tutorial and made it very easy to do it on my iwn. Appreciate and great job

@getitdonehomerepair 3 года назад

Glad it helped!

@nickwashington100 3 года назад

Wish me luck, watching this and then getting to it.

@getitdonehomerepair 3 года назад

Thanks for watching.I'm happy to help.

@patriciozazzini968 2 года назад

Very neat Video!

@getitdonehomerepair 2 года назад

I'm happy to help. Don't forget to subscribe.

@calvinchun34 3 года назад

Thank you very much. You saved my plumber a lot of time and me $$$. We can now put the sledge hammer and sawzall away!!

@getitdonehomerepair 3 года назад

I'm happy to help. Thanks for watching.

@purushottamdhakal867 4 года назад

It is really great to solve the problem , easy and save our costs . Thank you very much for your videos and hope to see more in future.

@getitdonehomerepair 4 года назад

Glad it helped

@stephenzies8867 5 лет назад

Great Job As Always Jim

@getitdonehomerepair 5 лет назад

Thanks for watching.I'm happy to help. Don't forget to hit the bell for notifications when a new video is posted

@chrisfromshaolin213 8 месяцев назад

Thanks

@getitdonehomerepair 8 месяцев назад

No problem

@kginoregon8550 9 месяцев назад

Wow, what a great teacher. I had instructions to install the new faucet, but had no clue how to remove the old one. I'm a 76 year old woman who HATES plumbing. It still took me hours to get the old one off, but now I have a pretty new sensor faucet with no leaks and no major mistakes. So happy. Thank you so much for the help.

@lindabeard7035 7 месяцев назад

Kginoregon8550, I'm a 74 year old woman and I'm getting ready to install a new kitchen sink faucet too. Hoping all goes well.

@briancastaneda9020 3 года назад

Great Job!!!

@getitdonehomerepair 3 года назад

Thank for watching. I'm happy to help.

@paulwatterson5992 3 года назад

What is that tool called to break the nut free? Great video.

@getitdonehomerepair 3 года назад

it is called a basin wrench. You can see it in my Amazon store in the description below the video.

@breeze787 Год назад

Good job I just changed mine same nut on the bottom of the faucet had to use the same deep socket plastic wrench you used. You could have edit out the more mundane stuff out of your video though.

@getitdonehomerepair Год назад

Good tip!

@markaubuchon6265 3 года назад

Nice edit - helpful video

@getitdonehomerepair 3 года назад

Glad it was helpful!

@georgefrench1907 4 года назад

Thank you.

@getitdonehomerepair 4 года назад

You're welcome!

@LiquidSoul06 4 года назад

What is the name of the tool for the nut

@LiquidSoul06 4 года назад

You can use a basin wrench about 13.00 at lowes

@getitdonehomerepair 4 года назад

It is called a basin wrench

@me4654 4 года назад

Can I lossen it just 1/4 inch without going under the stairs and turning off the water? Lazy mantaince guy's didn't clean the scraps of metal from previous faucet the corrosion I just wanted to slip a wire brush and clean under there because it's not flush+ it's not the correct one it's for a big bathtub with the clear seperate turning noobs super tacky

@amiruddinahmed7586 4 года назад

what is that tool used to at 6:15 to tighten the faucet

@getitdonehomerepair 4 года назад

It is called a basin wrench. Check my Amazon store in the description under the video to see the tool.

@GohAhweh 3 года назад

I cannot remove my current kitchen faucet.. impossible!

@getitdonehomerepair 3 года назад

What happened?

@IamBetMAN729 2 месяца назад

All i got is hot water and no cold

@getitdonehomerepair 2 месяца назад

Did you turn on both hot and cold valves

@navigatingrealestatetransition 4 года назад

The camera moves a lil too much

@getitdonehomerepair 4 года назад

Thanks for watching anyway

@waltjenkins1046 2 года назад

awesome video but i would add that with older faucets it is extremely difficult to get that install nut at the bottom of faucet under the sink off. i tried a couple of wrenches and got nowhere. i ended up just hack sawing off the top off the faucet and let the whole thing drop through the hole. took a couple of minutes but saved a lot of time and aggravation.

@mariahrosemarek 3 года назад

Thank you so much for the video! I followed this along and was able to replace my first kitchen faucet all by myself with no problems! Thank you again! 😁

@getitdonehomerepair 3 года назад

Great job!

@cannedlaughter2535 2 года назад

You failed to include the obligatory corrosion and obstructions (such as a garbage disposal) for the proper "ambiance." Nor were the resultant swear words and "oaths" against God and heaven made. But otherwise, it was an excellent overview.

@21314dac 5 месяцев назад

2 years later this is a stupid comment. Critic the video but still say excellent??

@monicamuzzy 2 месяца назад

Also the 3 more trips to the hardware store 😅

@ashbarakat8379 3 года назад

Best tutorial ever! So clear and detailed.

@CoreyAMoore 4 года назад

Thank you ... very thorough and easy to follow ... I have to replace my faucet due to a leak so this was very helpful ... thank you very much

@jonduggan7433 Год назад

This helped, Thanks...... BTW..... I haven't heard that accent since I left NY in the early 1980's. 🗽

@getitdonehomerepair Год назад

Glad to help

@alexandrastarks 3 года назад

Thanks so much for making this video. My husband and I just purchased a new home and we hated the faucet that came with it. We had never messed with anything like this before and it was a bit daunting, but we were able to completely replace it with a nicer one with your video. Thanks a million 😁

@getitdonehomerepair 3 года назад

That is awesome!

@AhmedN1404 3 года назад

I usually don't leave comments on videos, but I wanted to give a shout out to the great camera work and excellent narration of the whole process. It was very informative and easy to follow. Keep up the good work!

@getitdonehomerepair 3 года назад

Glad you enjoyed it!

@whitneyfry3236 3 года назад

Like a patient father explaining replacing a faucet! Wonderful! Thank you!

@getitdonehomerepair 3 года назад

Thanks for watching

@kensehres6330 4 года назад

Thank you! Your video helped me understand how to use the extender tool to remove the nuts. I was struggling with a crescent wrench when I realized I had the tool with the new faucet. Removal then became a piece of cake.

@getitdonehomerepair 4 года назад

Glad it helped!

@MustLoveFrekals 4 года назад

@@getitdonehomerepair what is this tool called?

@dasquarefoot 4 года назад

Thank you for creating this video - it was very thorough and helpful for this DIY newbie!

@getitdonehomerepair 3 года назад

Glad it was helpful!

@TitosCuatro 4 года назад

There is something therapeutic about watching the care you exhibit in replacing this kitchen faucet. A tour de force!

@getitdonehomerepair 4 года назад

Thank you.

@kimberlee0509 3 года назад

This was seriously the best tutorial, I have never ever did this myself and because you were so thorough I was! Woohoo! Thank you!!!

@getitdonehomerepair 3 года назад

Glad it was helpful!

@TheHungarianchick 4 года назад

I wish I had this much room to work in. I have a giant one hp garbage disposal unit in the way. 🤬

@getitdonehomerepair 4 года назад

Thanks for watching

@Bhoddisatva 4 года назад

I'm suffering the same problem. Its incredibly awkward to work around. Its impossible to get any leverage. :(

@laurameredith2118 Год назад

When disconnecting the sprayer hose, your hand is ‘in the way’ so I can’t tell if you are only pulling it, or unscrewing it as well. Help!!! I can’t get mine off!

@tomlee7904 4 месяца назад

It depends on the manufacturer’s design. I bought Glacier Bay and no tool need to tighten from underneath. It comes with a plastic compartment to tighten from underneath the sink

@garygullikson6349 Год назад

Excellent video, but I noticed that you didn't flush the supply lines through the hose fitting as shown in other videos. Not neccessary?

@faustace3093 6 месяцев назад

I replacing a Old Modern Faucet with an New Old School Reliable faucet. Modern not mean betta in my book

@SuzyTaylorOakley 4 года назад

Excellent tutorial - easy to follow. Now I just have to make sure I can get the old lines unscrewed. I have a feeling they'll be too tight, but I'm not giving up! Thanks, sir, for a thorough visual tour of the process.

@getitdonehomerepair 4 года назад

Glad it helped

@SuzyTaylorOakley 4 года назад

@@getitdonehomerepair It definitely helped! It took me longer than it would have taken an experienced plumber, but I got the job done, and NO LEAKS! That was the goal; our previous faucet was leaking badly. Thanks again for your help! Now I can check "replace leaky faucet" off my bucket list. LOL

@ernestleo6284 4 года назад

Great job thank you for taking your time to describe in detail the correct way to install this type faucet. It is interesting how the installation differs from manufacturer to manufacturer. The faucet I just installed came with non bursting color coded supply lines, gaskets for the bottom of the faucet or hole cover and top of the connecting nut. Along with the gasket is a metal ring that also fits over the connecting nut. The nut comes with 2 locking screws that are tightened after hand securing the counting nut.

@getitdonehomerepair 4 года назад

Thanks for watching.

@RichBoyLiving 20 дней назад

For..cet

@wd0enr 3 года назад

Do all brands have the same size nut? I have a 20-year-old Delta. No luck with a wrench. Need that special tool. Thought about hacksawing the pipe off so I could use a standard socket wrench. I need something like what is used to change spark plugs, except smaller diameter.

@getitdonehomerepair 3 года назад

Check below my video in my Amazon store.The tool is there.

@jenniferlee5127 3 года назад

Nice instructional video! Where do I find the tool 6:17 minutes into the video you used to unscrew nut from under the sink?

@getitdonehomerepair 3 года назад

Thanks for watching.That tool came with the new faucet. If you don't have the tool you can buy it in a big box store or below my video check my Amazon store . I have it there.

@graemebr 4 года назад

Nicely done. I watched the video while I did the work. All went well. Thanks!

@getitdonehomerepair 4 года назад

Glad it helped!

@DavefromCA2023 Год назад

Thanks for the video....but all these DIY have one thing different versus under my sink, room. Between the XL garbage disposal and the 19 stage water filtration system, I have about 10 square inches of room to work.

@getitdonehomerepair Год назад

Sorry to hear that. That will make it a little difficult.

@michaelholder57 3 года назад

What is the tool you were using at 6:30 called? Thank’s for the video!

@getitdonehomerepair 3 года назад

That tool came with the new faucet. If you need one you can buy one at the big box store.

@VictoriaDavies-o1i 6 месяцев назад

Why can't you connect water lines to faucet, then drop down thru sink

@ninemilliondollars 3 года назад

It was a good video. I'd recommend also to lay a towel in the sink, especially if you have a ceramic one to protect it and keep anything from falling down the drain. Same with the counter where the tools are being laid.

@getitdonehomerepair 3 года назад

Thank for watching. I'm happy to help.

@qiyang4596 Год назад

May I ask you what name is the tool which you use to take off the bolt ? Thank you!

@noraO2833 4 года назад

I appreciate this video. I’ll be changing my faucet this evening 🤩

@getitdonehomerepair 4 года назад

Thanks for watching. How do your job turn out?

@noraO2833 4 года назад

Get It Done Home Repair. Thank you for asking. My son and I made it happen 😃 No snags or hang ups.

@marvinshook9142 2 года назад

That plastic Moen tool works great for installing the faucet, but it ain't worth much for removing an old rusted together assembly.

@getitdonehomerepair 2 года назад

Yes rust can be very challenging sometimes.

@scottbillingham2221 3 года назад

My sprayer has a big black plug thing stopping it from pulling thru, how do I take this off? Thanks man in advance

@getitdonehomerepair 3 года назад

Sorry I don't recall but if you send me a picture I'll take a look.

@dougl6304 2 года назад

Appreciate your video. Which brand of faucet and model number is the new faucet you installed. Great job.

@getitdonehomerepair 2 года назад

Sorry I don't recall the mode but the faucet was Moen.

@chrisking3029 3 года назад

Thank you so much for this tutorial. I had my faucet break unexpectedly today & had to get a replacement. I've never done this before, watched your video & was able to replace it myself. Thank you again.

@getitdonehomerepair 3 года назад

I'm happy to help.Thanks for watching.

@anjmsar9 2 года назад

What brand faucet did you replace it with? Can please have the model number if possible? Thanks

@getitdonehomerepair 2 года назад

I'm sorry I don't remember the model number by it was Moen.

@kellymcsweeney6914 Год назад

Can anyone please tell me where to get the tool and what it is called to loosen the nut that holds the faucet and cords to the sink from underneath. I am trying a ridged wrench , but it's not working.

@getitdonehomerepair Год назад

The tool came with the new faucet. It is called a basin wrench. Here is a link to one in my Amazon store.RIDGID 57003 EZ Change Plumbing Wrench Faucet Installation and Removal Tool. amzn.to/3MhhBCj

@CC-zr5nv 3 года назад

Thank you, this was so helpful and all of your tips are spot on, if only I listened when you said to go slow when disconnecting the hose from the water line, I made a big mess but once it was cleaned up everything else went smoothly. It pays to watch the entire video first and then start the project. Thanks again.

@getitdonehomerepair 3 года назад

Glad it helped. I'll bet the next time you will loosen the hose slow.Hahaha

@Kisarazu99 3 года назад

17:30 my sink doesn’t have a valve but rather two lines connected by a nut - and I can’t get the to lines disconnected. Any ideas?

@getitdonehomerepair 3 года назад

Can you send me a picture?

@stevemarine769 4 года назад

Informative video, could have used a bit more lighting while doing under sink installation. Thank you for refresher video.

@getitdonehomerepair 4 года назад

Thanks for watching!

@TheHungarianchick 4 года назад

One of those headlamps will do the trick!

@joekind1 4 года назад

Good job but you left out one final step: Remove the aerator then turn on the faucet for a few seconds.

@getitdonehomerepair 4 года назад

Thanks for your input and for watching.

@perrystone7112 5 лет назад

Great job and excellent video👍🏾 But can you tells us why they put shelf pin holes on the back of your cabinet 🤔😂 never mind I’m too nosey😂

@getitdonehomerepair 5 лет назад

Thanks for watching.

@michaeldoherty2289 4 года назад

Its a stock base cabinet that can be used for base areas that don't have a faucet, sink, and sewer trap. End user can buy the shelves if needed and save a few bucks if not needed. Cabinet manufacturers save money by having only one cabinet that does double duty.

@Baldevthakur2725 3 года назад

Not all Hero’s wear a cape! Thank you!!!

@getitdonehomerepair 3 года назад

Thank you . That was very nice of you to say.

@qix6424 4 года назад

Nice video. Any recommendations on what size crescent wrenches to keep around for sinks and shower type things?

@getitdonehomerepair 4 года назад

Usually it is a good idea to have a few different sizes Thanks for watching.

@ogw28 7 месяцев назад

Thanks for the tutorial! I can save hundred bucks by learning this DIY. ❤👍

@getitdonehomerepair 7 месяцев назад

Glad it was helpful!

@sunsetz72 3 года назад

Thank you soooooo much!!!!! I had to replace mine today and after watching this video it was a breeze!!!!! I really appreciate it👍.

@getitdonehomerepair 3 года назад

Glad it helped!

@MyNameIsDaxito 3 года назад

I am replacing mine today, thanks!

@matthewjasinski4170 2 года назад

I like how you skip the hardest part ,loosening old but thanks

@getitdonehomerepair 2 года назад

No problem 👍

@IamBetMAN729 2 месяца назад

My extra length has my line all pinched

@getitdonehomerepair 2 месяца назад

You can create a loop in the extra so it will not bend the extra lines.

@wd0enr 3 года назад

Wish I had a handy tool to get my broken Delta faucet off. That gray plastic tool looked like something I need. Unfortunately I can't find one in any store and don't have time to order online. Kitchen faucet out of commission until I can get the old one off and new one on. Dirty dishes piling up. (This video is actually better than anything else I've seen.)

@getitdonehomerepair 3 года назад

Thanks for watching. Did you check any big box stores for the tool?

@OmazingE30 2 года назад

Couldnt make a longer video.. damn

@mykuljay 8 месяцев назад

This was terrific! My new faucet only had pictures - no written instructions. Thank you.

@reallifeengineer7214 3 года назад

When removing the old nut & bracket, at 6:26, Have you ever had a faucet so old, the nut has basically rusted & fused with the bracket itself? And does not even allow the hex tool to fit over it anymore? What have you found to be the best way to remove that, other than cutting thru patiently with a Dremel? Thx!

@getitdonehomerepair 3 года назад

can you send me a picture of it?

@JustMe-mn4gr 3 года назад

Great tutorial, thanks! I just brought a Delta Savile home from Lowes on sale for $159. Not sure I want to replace my old one but it's dripping plus leaking out the bottom and it has no manufacturer tag on it so I don't know for sure which seats and springs to get. Plus it isn't a high arc like this one. I haven't unboxed it yet, but I am guessing the "diamond seal technology" will be cut off if I cut the hoses shorter and put those gaskets in. Also the color coding will be lost? I really don't want that kind of hose and I don't want extra hose looped around under there. But it was either this one or a Moen and the Moen has only max 1.5 gal per minute flow where this one has max 180 gal per minute. Plus this one has three different spray settings and it is supposed to be over-spray proof.

@getitdonehomerepair 3 года назад

Thank for watching. I'm happy to help.

@alono4473 3 месяца назад

Great video! Very well explained and very detailed.

@getitdonehomerepair 3 месяца назад

Glad you enjoyed it!

@laurameredith2118 Год назад

No problem. I cut the hose.

@jaimemacias4760 4 года назад

Great video....going to change my faucet now.

@getitdonehomerepair 4 года назад

I'm happy to help. thanks for watching.

@dougl6304 2 года назад

Great video. In future could show us what exactly what it was you removed in each step and the tools side that fits into the part being removed. Also Delta faucet instructions include flushing the lines into a bucket first before installing hose.. to prevent possible clogging of aerator on water sprout. Thank you for making video.

@getitdonehomerepair 2 года назад

Thanks for watching

@unxdroidsteve8026 Год назад

Thank you!!! Great video! Super helpful to me because I was removing and installing the same faucets you used. How did you know? 😀

@getitdonehomerepair Год назад

Glad it helped. You will like the new faucet.

@MzIrresistable38 4 года назад

I just got a new fauand and installed tonight, here's the problem I ran into. The connections to the hot and cold lines are exactly like the ones you have, but I have an older line and its not the same. How do I connect it to the water line? Do I have to change the hardware, or can I go and buy a piece to that will match the type I have? Sorry if I don't know the correct names or right wording. Hope you understand what I'm saying? Thank you in advance.

@getitdonehomerepair 4 года назад

Can you send me a picture of the parts and send it to me?

@tnpp2864 3 года назад

What’s the tool you use? I’ve got this nut that holds the faucet to the sink that just won’t budge! I’ve tried penetrating oil/spray and it won’t budge!

@getitdonehomerepair 3 года назад

Basin Wrench amzn.to/2CDgCL6

@michaeldowning2902 Год назад

Excellent - just followed your directions to change my kitchen faucet and it was perfect. Thank you very much

@getitdonehomerepair Год назад

Fantastic!

@kevinmadison862 2 года назад

What is the name of the tool that take of the faucet nut

@getitdonehomerepair 2 года назад

It came with the new faucet.

@JackMcMotivate 4 года назад

Thanks. When i try to close my hot valve, the faucet still drips slightly, valve may b shot, can I perform the hose change with a slight drip from hot? Really dread turning off water to house, my luck it’ll break. May be a valve under sink in basement?

@getitdonehomerepair 4 года назад

I would not try to change it without turning off the water completely.