HOW TO REMOVE AND REPLACE SIDE VIEW MIRROR ON FORD FIESTA MK7

Подписаться 968 тыс.

Просмотров 242 тыс.

50% 1

HOW TO REMOVE AND REPLACE SIDE VIEW MIRROR ON FORD FIESTA MK7 S ST SE 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017
► Our Website: mechaniclifesty...
Hey guys, in this video we will demonstrate how to remove or replace side view mirror on Ford Fiesta MK7. We demonstrated on the left driver side mirror removal on 2015 Ford Fiesta ST. If you need to replace the right passenger side view mirror it will be almost the same procedure. We will have the video on our channel.
Check out the playlist for more Fiesta Repair Videos ( we will have almost 200 Fiesta Videos): goo.gl/zJZG19
This video might be helpful on the following models:
2008 Ford Fiesta Side View Mirror Removal Replacement
2009 Ford Fiesta Side View Mirror Removal Replacement
2010 Ford Fiesta Side View Mirror Removal Replacement
2011 Ford Fiesta Side View Mirror Removal Replacement
2012 Ford Fiesta Side View Mirror Removal Replacement
2013 Ford Fiesta Side View Mirror Removal Replacement
2014 Ford Fiesta Side View Mirror Removal Replacement
2015 Ford Fiesta Side View Mirror Removal Replacement
2016 Ford Fiesta Side View Mirror Removal Replacement
2017 Ford Fiesta Side View Mirror Removal Replacement
Products used in the video:
► Screwdriver set: amzn.to/2DLqzWw
► Panel Removal Tool: amzn.to/2EfKSZa
► Makita Impact: amzn.to/2DUG65o
► Socket Set: amzn.to/2DQTnfh
► Replacement mirror: amzn.to/2DPiKee
► OUR MAIN CHANNEL: bit.ly/2ad33QG
► BMW E46 ZHP PROJECT bit.ly/2g8tOa9
► 2013 GT86 Project Playlist: bit.ly/2dz4xY1
► 2015 Ford Fiesta ST BUILD Playlist: bit.ly/2a59UKp
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300
amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch
amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser
amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable
amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310
amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405
amzn.to/2jk8nqB
•GoPro HERO5 Black
amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510
amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 82

@AutoRepairGuys 6 лет назад

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ru-vid.com ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@ibrahimkeagan6842 3 года назад

i know im asking the wrong place but does someone know of a way to get back into an instagram account?? I stupidly lost the password. I would appreciate any tips you can offer me!

@kaydenhank852 3 года назад

@Ibrahim Keagan instablaster =)

@ibrahimkeagan6842 3 года назад

@Kayden Hank thanks so much for your reply. I got to the site on google and I'm trying it out atm. Takes quite some time so I will reply here later when my account password hopefully is recovered.

@ibrahimkeagan6842 3 года назад

@Kayden Hank It worked and I finally got access to my account again. I am so happy:D Thanks so much you really help me out :D

@kaydenhank852 3 года назад

@Ibrahim Keagan glad I could help xD

@darrylscott-windsor6556 3 года назад

No need to completely take off the door panel and disconnect all the wires, you just need to disconnect the window up and down control in the middle of the panel, that's all, then just let the door panel hang down enough to get access to the mirror wire. Really easy and took me no time at all. Just use a strong string to help get the wires for the mirror through that pesky little hole. Tie the string to the old wire before you pull the wire through to take the old mirror off, then retie that string to the new wire of the new mirror to help pull the wire through inside the car again. Oh, and be careful with that nut, undo the last few turns really slowly with a lot of care so you don't lose it in the door. Good helpful video though, thanks :)

@discocitygroove 3 года назад

TIP! It's really easy drop the mirror nut down inside the door (I lost 2). Before unscrewing the nut, push a soft small towel in to the door cavity underneath the nut that way if you drop it you won't lose it.

@hvymax 2 года назад

I use a piece of tape on the socket to retain the nut in the socket.

@hvymax 2 года назад

Might be easier to splice the wires outside the car eliminating the door panel removal.

@hvymax 2 года назад

I use a piece of tape on the socket to retain such fasteners.

@armed_but_blind2768 2 года назад

I'll keep this in mind thanks for the tip

@SPCLPONY 7 месяцев назад

@@hvymax Hmmmm, I'm almost inclined to give that a try.

@monkeytommo 6 лет назад

Just wanted to say a quick thank you for this video. Whilst my Ford didn't have as many screws to remove, it was pretty similar. Especially liked the advice about getting the wing mirror wire in the gully to avoid getting it in the way of the window glass when you open the window. Word of note, I didn't have to take the whole door panel off... I was hindered by a nut that just wouldn't unscrew, so had to improvise! It was tricky, but I tied a piece of string to the new wing mirror cable and managed to feel where it was before pulling it through and re-connecting everything! Glad to say it worked and I've saved myself over £500 for a new one fitted by a Ford dealer in my area. Thanks again, inspired me to give it a go... So glad I did.

@CMCustom112 4 года назад

My sister Basically Totaled her car and this channel has been a Godsend.

@milesdavey6245 5 лет назад

Brilliant video. Thank you very much for producing it. I replaced my mirror using your video and did it first time with no drama. I owe you one.

@mrlim9205 4 года назад

Thanks for the video. I changed the same mirror without remove the door inner panel. It took about 3 hours. The hardest part is the rewiring the cable back to the connector.

@jeremyhefton2542 9 месяцев назад

Thanks. I just bought an 11 Fiesta and realized tonight as I was putting on the Frostbkocker that the mirror was loose! I will pull the rubber hole cover and check for the bit tomorrow!

@DonSheppard 5 лет назад

Thank you very much. Excellent video made replacing my mirror almost too easy. Sure took all the guess work out of it.

@josephdanaher3572 5 лет назад

nice easy to follow video, I cant help but think ford could have made this easier by placing the connector points for the mirror within the seal where the nut is removed to take the actual mirror off, would save having to remove a whole door panel

@hvymax 2 года назад

Mine are there now with spade connectors.

@andrew8614 3 года назад

Thank you so much! Just finished replacing my wife’s mirror with the help of this video

@chrishendry578 3 года назад

Here for the same reason

@dannygarcia8341 4 года назад

Greatly appreciate all the detail shots

@peterruppert7856 4 года назад

Great Video! Those quick disconnects can be a PAIN!!! So thank you so much for giving the extra detail on disconnecting those things! :)

@TheAIWizard Год назад

Thanks, very helpful. Getting the door to pop off once the screws were out took an inordinate amount of force. But worked fine in the end. Didn't actually bother removing all the wire from the door panel just had my partner stand there holding it while I did the door mirror cable.

@Pantsdownbrown 4 года назад

How to remove side mirror: 90% of time will be spent taking the door apart. Thanks, Ford!

@hvymax 2 года назад

I spliced the wires eliminating all that.

@777aintboeing 5 лет назад

Brilliant video guys! Saved me money! 👍

@stephenbromley1876 2 года назад

Just fitted my new mirror on my 2016 2 door fiesta your video was a great help although layout was slightly different, but tips about window channel useful cos I would never have known that. didn't have a panel removal kit so I used a paint stripper to pry door panel clips .

@ksmith7111 6 лет назад

Thanks guys. Was able to swap out a broken drivers mirror with your instructions. I was curious whether the mirror should fit tight against the door, since there is all that foam in the mirror housing. My daughter was concerned that water/rain could get between the door and the housing and cause problems, since the mirror isn't sitting totally flat on the door. The passenger side doesn't fit flat either, so that may just be a design flaw.. er... feature.

@kimanora5178 2 года назад

Were you able to fix this gap?

@fischermann2891 6 лет назад

Excellent work guys. Thank you very much!

@brianhardin1 Год назад

Attach a string to the mirror wire when removing the old mirror. long enough to be able to grab it on both ends. then remove the string and attach to the wire from the new mirror. that will make fishing the wire back thru the door easier.

@castrolgtx5064 4 года назад

Fantastic video thanks for sharing 👍

@NovaValentine000 2 года назад

11:23: I love how you mentioned Ford makes things more complicated than it should. Lol, so true.

@robinfrancis2911 5 лет назад

Great video.....but do you really have to remove the whole inner panel just for one connector??.....surely there must be an easier way!

@hvymax 2 года назад

Spade connectors on the wires.

@santiagodelbono1 5 лет назад

Great video, thanks for sharing.

@mikk600 5 лет назад

If you attach a piece of string to the old wire you can use it to pull new wire back through

@stevenk5786 4 года назад

What do you mean?

@Tribulation88 3 года назад

@@stevenk5786 If you tape some string to the wire you can fish it out easier and then pull it through & remove the string. Much easier that way. Also magnetic bits will help you not drop the nut for the mirror. Work smarter not harder ;)

@raynoble5186 Год назад

Great video but I think I will try not to remove all the panel just the plug for the mirror don’t no maybe not work I’m ready to replace my broken mirror so thank you so much for your video very helpful thanks

@rjc241 Год назад

excellent video i wish a lot more were as good

@mizheanfrazier5441 3 года назад

Thanks y’all.

@Jherry1027 2 года назад

my Friend, i learn a lot from you how to fixed my ford fiesta 2016. Csnni request how to change lower cover of side mirror. I want to replace it. I stead of buying whole side mirror. It have crack. Thank you.

@hiramesensei3112 6 лет назад

Cheers mates, this helped a lot.

@hvymax 2 года назад

You can tie a piece of string to the old plug before you pull it out then tie it to the new one to pull it back along the same path.

@wolves606 2 года назад

That's what I'm gonna try lol

@victoriabanner5336 5 лет назад

Thank you so much for this!

@unit0033 3 года назад

this was a lot easier on the 2001 focus! 1 small panel and boom.. done. This one is ridiculously complicated

@thom2967 4 года назад

Heads up, the white connecting the inside door handle may just fall out when the plastic front is removed. Make sure to reconnect that one when you put it back on or you'll trap your passengers

@ashleyturner7259 4 года назад

This was so helpful ☺thanks for posting

@hvymax 2 года назад

Great video Thanks. My daughter busted her mirror on somebody's trashcan.

@oguzhanbuyukbayram8677 Год назад

In my fiesta car, when I turn my right-hand mirror inside, it doesn't turn completely. is interrupted. I think there is a fault in the motor that turns the mirror inside. what can i do wd40 ?

@thejestern 2 года назад

Hey that's cool but what's the shape of that 30mm nut? just a normal hexagonal?

@peterwilliams1004 Год назад

They couldn't position the connector so you can disconnect it without removing the door card?

@efreutel Год назад

Very good. Thank you 🙏

@seancarmichael1685 Год назад

Should have taped a piece of string to the mirror wire before pushing it in the hole. You can use it to pull the wire from the new mirror back into the door.

@natsuteo94 Год назад

i’ve changed my mirrors and now they don’t respond to close button. Is there any setting or something I should do? 🙏

@franciscobarafani6792 5 лет назад

A piece of my screw driver fell inside the mirror hole while I was trying to tighten it up. Do I have to disassemble the whole door again?

@trentdd15 3 года назад

My passenger side mirror won't fit at all. Getting to the point of absolute frustration with this. I got ran into a little bit, but more like slowly moved into on the highway and before I knew it my mirror was facing directly at me. From what I can tell the door panel holes for the connections don't look fucked up but my new mirror refuses to get the right fit.

@kimanora5178 2 года назад

Was this fixed?

@trentdd15 2 года назад

@@kimanora5178 The inside of my door panel was damaged which ended up being my issue. Just wouldn't sit flush until that was fixed

@kimanora5178 2 года назад

Just noticed mine got a bent bolt on the used side mirror replacement. Not sure if the door panel is damaged have to compare it with the other side. So if its the door panel, how do you fix that?

@trentdd15 2 года назад

@@kimanora5178 I took my car to a shop to get it fixed by people who had experience with it unfortunately I won't be much help there

@kimanora5178 2 года назад

I see. Thanks.

@cknightley2290 6 лет назад

Awesome! :)

@sebastianlpoliak 5 лет назад

Hi guys, do you know the size of the nut? I've lost it inside the door and I don't want to open all panel... so I'll buy another one

@tomas-jj3gm 3 месяца назад

Why don't you tie a peace of strong on old wire pull it through when you remove old mirror pull it through with wire and string then tie it to new one and pull string though with wire untie plug wire on

@hydrobuu 6 лет назад

Awesome, have side mirror looks to be loose.

@mgproryh 2 года назад

My dad broke my mirror the second day of owning this car, I'm fuming lmao, all that was up is the mirror cover had come unclipped in one spot, he pushed down and crushed the mirror breaking the black parts that hold the clips. Didn't even let me know or ask me first... Annoying as hell imna have to go through this when the mirror comes... £50 that could've been spent on petrol

@Aaronhouston33 5 лет назад

Ford made this more complicated than it had to be, replacing a Tesla mirror is easier

@AndrewLale 3 года назад

How do you remove a gap?

@philcopson3900 2 года назад

Thanks for the video; just one small off-topic point to help you when making these videos - "Mk" is short for "Mark" - so it's pronounced as "mark", not "Emm Kay". Cheers.

@Hermitmaster 2 года назад

For anyone watching this...please remove your HUGE metal watch before working on a car! You're going to cause scratches.

@maxxalexandrov1251 6 лет назад

как будто русский рассказывает :D

@Gerich_Dnepr 3 года назад

How many "Okey" you said!?

@JT-qi1wk 2 года назад

Okey

@jonathanboreham8717 5 лет назад

Should of put wire at the end of it before Removing it why do people make things so difficult and then make a video of it

@dexietyy7922 Год назад

So stupid don’t understand why they didn’t put them in the same place as the Mk6

@blumtop 10 месяцев назад

before you put the cable through the top hole when installing the mirror, make sure you attach a long wire to it. then run the wire down until it comes out of the bottom hole with the plug, then tighten the mirror (13 hex flange nut in case it gets lost). i had tried this without the wire, installed it and the window regulator pushed the cable down. be sure to use the wire, i spent hours trying to figure out why the cable was interfering and pushing it to the side etc. apparently there are several shafts in there, hence the problem with the cable blockage. bevor man beim einbau des spiegels durch die obere öffnung das kabel steckt, unbedingt einen langen draht daran befestigen. dann den draht runterführen bis er aus dem unteren loch rauskommt mit dem stecker, dann den spiegel festmachen (13er sechskant flanschmutter falls diese verloren geht). ich hatte das ohne draht probiert, eingebaut und der fensterheber hat das kabel runtergedrückt. unbedingt mit dem draht machen, ich habe stunden damit verbracht warum das kabel stört und zur seite gedrückt etc. anscheinend sind dort drinne mehrere schächte, daher das problem mit der kabelblockade.