Тёмный

How To Remove Carbon BuildUp using Fuel Injector Cleaner in Vacuum Lines 

BadAssEngineering
Подписаться 6 тыс.
Просмотров 9 тыс.
50% 1

Cleaning Intake Carbon Build Up by pouring Fuel Injector Cleaner into the Throttle body of an engine is not always posible, if the throttle body is not in an accesible place. How To Remove Direct Injection Carbon?
In this video, i show how to use Chevron Techron Fuel Injector Cleaner to remove carbon buildup from an intake by using its Vacuum Lines or Ports to suck it into the intake manifold and intake valves. This method works on any gasoline engine, from Carburetors, Multi Port Fuel Injection MPFI and GDI.
As i have exposed in previous videos, any good Fuel Injector Cleaner will dissolve carbon build up in intake valves, runners and manifolds if sprayed directly into them
Best Chemicals to remove carbon: • TOP 10 Best Chemicals ...
How to Use Fuel injector cleaner via Throttle Body: • How To Remove Intake C...
Such Clean
Very Carbon Removal
Many Fuel Injector
Much PolyEtherAmines
Carbon Clean Carbon Cleaner Carbon Build up Carbon Buildup Vacuum Port Carbon Removal How to remove carbon
#CarbonBuildUp #FuelInjectorCleaner #BadAssEngineeering

Авто/Мото

Опубликовано:

 

26 сен 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 27   
@ospuddy
@ospuddy 2 года назад
This car has port injection: putting the cleaner in the tank will clean the injectors, intake valves, and combustion chambers slowly. Instead, he's overloading the engine with the cleaner; that's why the car is smoking. The unburned cleaner may damage the catalytic converter. And if the vacuum sucks up the cleaner too fast, the engine will hydrolock and be totaled.
@elroz1675
@elroz1675 Год назад
yeah. If it is port injection, then they should just put the cleaner in the gas tank. All set. This process on the video would be for GDI. But it is not GDI engine. 😅
@mikmik7033
@mikmik7033 Год назад
Exactly what I was trying to find I have 1nrfe vvti petrol engine but which hose to use Is it the one brake booster one or anything else
@rmh5102
@rmh5102 3 года назад
"This truck, car, crossover, whatever you wanna call it" Lmao
@BadAssEngineering
@BadAssEngineering 3 года назад
It self identifies as a PickUp truck
@Admin-ie9hp
@Admin-ie9hp 6 месяцев назад
Can you do thUs with BG 44K as well?
@atifsarfraz7621
@atifsarfraz7621 3 года назад
hi, love you videos.... can I do this on a 2006 Civic Ex sedan 1.8 liter. I don't know wheres the vacum line? can you help
@BadAssEngineering
@BadAssEngineering 3 года назад
The easiest one would be the brake booster line, but there are others
@areethe7
@areethe7 2 года назад
So, injection cleaner has same effective effect to clean intake manifold and valve as catalytic cleaner and be able to shoot throttle vacuum line? I only know specified product each to clean as their described name. Catalytic cleaner to clean catalytic converter, intake manifold and valve, and combustion chamber by shooting through vacuum line, while injection cleaner to cleaner injector and valve by pouring into fuel tank.
@BadAssEngineering
@BadAssEngineering 2 года назад
That's the marketing trap. Detergents are the things that do the work, I don't know about cat cleaners, but a good fuel injector cleaner works. Seafoam is injector cleaner, they just market it as a pour-into-engine product. Any injector cleaner will work, what you look for is for the one with the most detergents ln it
@Aaron44654
@Aaron44654 2 года назад
I tried this with techron but I bogged the engine on purpose and let it stall thinking maybe that would be a good way to hotsoak it? Could this damage the engine? I barely poured any at all, just enough to stall it.
@BadAssEngineering
@BadAssEngineering 2 года назад
Nah you should be fine, just be mindful to change your oil afterwards if it gets too dorty
@ospuddy
@ospuddy 2 года назад
You may damage your engine if you hydrolock.
@BadAssEngineering
@BadAssEngineering 2 года назад
@@ospuddy Dont pour a 5 gal bucket at once lol
@ospuddy
@ospuddy 2 года назад
@@BadAssEngineering A few reviews on Amazon for CRC show the users hydrolocked their engines after following the CRC instructions. If the intake manifold has a geometry that tend to puddle the cleaning fluid into a low spot or if the intake has variable-length runners, the risk of hydrolocking increases. Both BG Platinum and ATS 3C include instructions to rev the engine 2-3 times every 30-45 seconds to clear any puddling. ATS has service bulletins warning which cars cannot be cleaned using their machine due to hydrolocking risks.
@dr.priyankasharma3634
@dr.priyankasharma3634 3 года назад
is it normal to dry carbon buildup in petrol engines exhaust?????
@BadAssEngineering
@BadAssEngineering 3 года назад
No, unless they have EGRs
@dr.priyankasharma3634
@dr.priyankasharma3634 3 года назад
@@BadAssEngineering what is EGRs??? My toyota yaris sedan driven only 6000 km and I found little dry black carbon in silencer
@BadAssEngineering
@BadAssEngineering 3 года назад
@@dr.priyankasharma3634 that's... normal...
@dr.priyankasharma3634
@dr.priyankasharma3634 3 года назад
@@BadAssEngineering thanks
@mb7050
@mb7050 2 года назад
why not just mix it with the fuel in the tank ?
@BadAssEngineering
@BadAssEngineering 2 года назад
Only if you had a carbureted engine
@marcustrue1213
@marcustrue1213 Год назад
That’s not true even if it’s a carbureted engine, he would pour it down the throat of the carburetor. I don’t know how familiar you are with carbureted engines. Sounds like you’re kind of a hater on them but really the only difference in procedure between the two is on a fuel injected motor, you have to worry about setting codes off or clogging the catalytic converter/02 sensors etc. whereas with a carbureted engine you can pour it directly into the carburetor as said or utilize the brake booster vacuum line just because it’s carbureted doesn’t mean that you can do the same procedure if anything it’s easier
@seanhatch4425
@seanhatch4425 3 года назад
Removes every bit of carbon.... Hilarious dude!
@kevlong8119
@kevlong8119 3 года назад
This is not how you do an injector cleaning. Completely wrong. Also if I find out where you are tearing up the street or parking lot with your tire spinning I will report your foreign ass to authorities where I did this with another individual and they had to pay for the damage to the area from the tires. It cost them a substantial amount.
@soydan5057
@soydan5057 2 года назад
Haha I know you drive a ford f-150 😂🥱 seems that old junk of yours is having so many issues Kev long always the small size energy threatening someone over the internet
@sambrown1849
@sambrown1849 7 месяцев назад
Try that in my town tough guy! We’ll settle it the old fashioned way
Далее
How To Clean Carbon Off Your Engine!
13:58
Просмотров 1,9 млн
5 Car Products You Should Buy (This Saved My Car)
10:06
Я ВЕРНУЛСЯ 🔴 | WICSUR #shorts
00:57
Просмотров 2,3 млн
GDI Engines and Carbon Deposits | Know Your Parts
14:00
Does Seafoam Actually Work in a Car? (with Proof)
9:02
You MUST ALWAYS Carbon Clean Your Engine
12:11
Просмотров 359 тыс.
The CAR WIZARD shows how to de-carbon your engine
17:08
The Story Of Fuel Injection
39:00
Просмотров 1,4 млн