How To Remove Door Panel On Hyundai Elantra 2007-2011

Подписаться 32 тыс.

Просмотров 183 тыс.

50% 1

IF YOUR WINDOW MOTOR IS NOT WORKING WATCH MY VIDEO "DOOR PANEL REMOVAL ON SONATA" AND FAST FORWARD TO MINUTE 9:00. HERES THE LINK
• Hyundai Sonata Door Pa...
if you need to buy the panel clips click here: amzn.to/2SreCKF
Heres a panel clip removal tool: amzn.to/33ebpEi
If this video helped you fix your problem and save some bucks, then support our channel! Any size donations are welcome!!! Its simple and quick just click the link and select amount.
www.paypal.me/GarageBoysSupport
Or check my store here:
/ @garageboys
Don’t miss the chance to be a proud supporter of a good cause!
Also like and subscribe
-----------------------------
This video will show you how To Remove the door panel on a 2008 Hyundai Elantra and it will also show you what tools you will need. This procedure works on any 2007 to 2011 Elantra.
lock assembly part# 81970 2HA00
keyhole cover part# 82652 2H00
value of both at Hyundai Dealer $50
for Business inquiries email me at: Garageboys281@gmail.com
Disclaimer: Due to factors beyond the control of GarageBoys, I cannot guarantee against improper use or unauthorized modifications of this information. GarageBoys assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GarageBoys recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GarageBoys, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GarageBoys.

Хобби

Опубликовано:

11 апр 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 74

@RaquelHarrison1 3 года назад

Helped me put in new speakers, lots of thanks!

@bazilwreckerloughead 5 лет назад

Well done. I just bought a 2009 Sonata & the power lock cable on the passenger door wasn't working. I wasn't sure how to remove the inner door panel to fix it, I found this very helpful, I didn't know about the window track being attached to it! Thank you, nice work.

@GarageBoys 5 лет назад

I’m glad I was able to help you, if you can help me back by liking and subscribing :-)

@bazilwreckerloughead 5 лет назад

@@GarageBoys I'm on it, WITH PLEASURE!

@adrisanc 4 года назад

Thanks for the video, great job explaining everything. For those wanting to do this to the rear door, there is only one screw attaching the regulator to the window. You'll see it when it goes down far enough. It's a pain to remove, make sure you don't strip it. Get a bit that fits tight and get as much leverage on it as possible. I'll probably replace it with a bolt when putting it back together. Good luck everyone!

@GarageBoys 4 года назад

Thx for the input!

@MrFatem 3 года назад

Are there any videos on how to do it for rear doors

@jayb9687 3 года назад

Thanks saved me from wrecking my window :)

@paulwood7529 5 лет назад

Thank you so much, you did a really good job, made it easy for me. Thanks again.

@GarageBoys 5 лет назад

I’m glad I was able to help! If you can, help me back by subscribing and liking the video 😊

@flspeid 5 лет назад

Very useful content. Thank you. This will def help me when I will install dynamat in the doors.

@GarageBoys 5 лет назад

Glad I could help! Let me know how it goes, I heard a lot about Dynamat but never tried it.

@ooscgt 3 года назад

Thanks man. It is helping me figure out how to remove it on my 2017 elantra

@GarageBoys 3 года назад

Glad I could help

@youtuberonin 5 лет назад

thanks mate this helped me a lot, thumbs up

@GarageBoys 5 лет назад

Glad I was able to help!

@bachaungoc4805 4 года назад

Thank you very much.

@felixcano7540 6 лет назад

Very useful info thanks

@GarageBoys 6 лет назад

We are glad this video helped you! Please subscribe to help us make more videos and also check or other plays lists for more repairs to this car

@jingcailiu1627 Год назад

clear and nice instruction

@abdalqadr1 3 года назад

Greetings for you from Iraq

@FranciscoGalicia Месяц назад

Thanks for your video. The ossue i have is that the left side door doesnt open electronically. Not the front not the rear left side. You know what can be? Weird that both in the left side not work . Thanks

@omarmohammed1277 6 месяцев назад

شكرا جزيلا

@joshbaez4965 6 лет назад

Quick question my driver side door handle when pulled does not extend all the way out so it’s kind of like.. if it were a door knob it opens with only half of a turn. And it opens on its own while driving sometimes.. any Idea on why it doesn’t pull all the way out??? Thanks for the video I appreciate it.

@GarageBoys 6 лет назад

You can take out the handle easily by opening the hole on the side of the door, you don’t even need to take out the door panel. I have another video of a Hyundai Sonata on my channel under the Hyundai Playlist. That video will probably show you more details on that.

@joshbaez4965 6 лет назад

Thanks brotha I appreciate it. I’ll do that and see if I can add more answers to people’s questions.. thanks for all you guys do..

@jasmwhite1 6 лет назад

Rear left window in my 2010 Elantra is acting like it has popped out of the track or something. Will only go half way up. Will be taking apart tomorrow. Anything different between the front and rear doors?

@GarageBoys 6 лет назад

Everything should be the same except it will have way less electric connections

@jasmwhite1 6 лет назад

Got it done. Thank you. lower bolt that holds the back side of the window track had the nut loosen up and fall off, derailing the window. NOW, I still could not completely get the metal panel off! I removed the torx around the latching mechanism and also completely removed the door handle assembly. But toward the rear of the door that piece of window track (inside the door) is in between the door handle mechanism and the door latch preventing me from completely removing the metal panel. There are two small rivets that anchor the whole latch/handle assembly right where the two sleeved cables (for the inside door lock/handle) to the inner metal panel. Any idea how to over come this? Thanks again!

@GarageBoys 6 лет назад

Well, you can check my sonata door panel removal video, it’s a little more different then this and it may help you with new ideas

@adrisanc 4 года назад

@@jasmwhite1 I ran across this video when I was struggling with the same exact thing on my rear door. I was finally able to remove the metal panel by removing that rear track that holds the back part of the window. There's a bolt that holds the bottom end of that track. Once removed, you have to get the window all the way up, push that track outwards and wrestle with the latching mechanism/door handle to get it out through the gap that you create when moving it out of the way. I was able to get large enough gap to get it out. It's a pain, but it's possible. This will expose everything on the inside of the door. I cut those rivets off that you mentioned, but it didn't do anything. I made a lot of mistakes removing this, but luckily I'm heading to the junkyard tomorrow and will document how everything goes back. I know it's a year old, but other folks may have the same question! Sorry for the long reply, just thought this would be helpful for anyone else running into this same issue.

@savvysav5115 3 года назад

@@jasmwhite1 that track thats in the way has 2 bolts one at top and one at bottom. I loosened those and bent that plastic track a tiny bit so i could sneak the door lock mechanism past that part.

@jwheatley1209 4 года назад

Had to replace the whole inside panel because the window track is built in.. How do I take the dual handle cables out of the old panel?? Take apart the handle?

@GarageBoys 4 года назад

Yes

@aguilahernandez 4 года назад

Muy buen video pero me gustaría lo explicaran en español gracias

@GarageBoys 4 года назад

Gracias por el comentario, vamos a tratar de agregar subtítulos al vídeo más adelante

@user-wr9xs9uc7v Месяц назад

كيف افتح باب خلفي النترا 2007 ما يفتح من الداخل ولا من الخارج

@imamoviefanatic 2 года назад

Not sure how to ‘release the window’. My window track is stuck up and it isn’t sliding down into a lower position like yours

@juanmiguelhernandez3698 2 года назад

Como quito el segundo panel

@jacquelineparrales6521 4 года назад

👏🏻😁

@catnip2906 5 лет назад

I have a 2009 Hyundai Sonata. Both exterior and interior door handles are broke on the drivers side door . I can't open the door. What is the best way to cut out the door panel to unlock the door and replace the handles?

@GarageBoys 5 лет назад

I don’t think you have to cut the panel, it’s hard to give you a solution without seeing it but you should be able to take out the handles either interior or exterior and try pulling the wire manually. Obviously make sure lock is open, that way you should be able to open the door

@catnip2906 5 лет назад

@@GarageBoys Your saying I should be able to get the door open without removing the panel. Thanks for your reply.

@vitoscatigno4207 4 года назад

What is a Philips/star screwdriver...They make plastic tools for removing door panels so you don't mess them up with a screwdriver!

@GarageBoys 4 года назад

Yes if you have it you can use it, but my videos are made for the average joe that doesn’t have special tools but just a basic everyday tools

@camphor333 6 лет назад

I can not loosen the two bolts in the holes because the window is stuck down and the glass is in the way

@GarageBoys 6 лет назад

We had that issue on a Sonata last week (we are posting the video next week) what you have to do is take off the window motor and manually turn it. It’s easy, the sonata had a different set up but it’s 3 bolts and then you manually turn it one way for up and the other for down

@47853ll 6 лет назад

Garage Boys I have the exact same issue where my window sounds like it's grinding when I press the up switch. I took everything off but the window doesn't raise. How does the window motor get removed?

@47853ll 6 лет назад

Alright so my 08 Elantra had one of the metal wires that moves the pulley up and down all tangled. I found that out when I removed the regulator face with the three torx screws. I lifted the metal panel as far as I could outwards with the glass all the way down, used a wrench to loosen the two 10mm bolts tightened on the glass. Then I was finally able to lift the glass. That's how I was able to get past the step that you're stuck at.

@GarageBoys 6 лет назад

47853ll tonight Or tomorrow I’m uploading a video of this same process but on a sonata and in that video I show how to remove the motor and manual raise or lower the window.

@GarageBoys 6 лет назад

Ok so we uploaded the video about the sonata with the window issue and in that video I show you how to take off the motor and manually lower the window, it’s a different door but the format is the same. Here’s the link ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WtxtZoGj9G4.html You can fast forward to min. 9:00 that’s when I start talking about the motor. Hope it helped and hope you subscribe

@brutaltruth4140 3 года назад

Breaking clips isn’t inevitable

@johnkosheluk1041 5 лет назад

No you use a plastic panel tool so you dont scratch the door

@GarageBoys 5 лет назад

If you want you can but not everybody has those tools and my videos specialize in showing how to do jobs with basic every day tools. Ps: I didn’t scratch the door

@paulna5526 10 месяцев назад

WALMART WILL NOT FIX A LEAK IN THIS POSITION, THEY SAID SIDEWALL, I DID IT MYSELF AND IT'S ALREADY LASTED TWO YEARS, THAT TELLS YOU WHAT I THINK OF WALMART

@shantelfullerton9865 4 года назад

I am pretty sure you can still buy handbook with all details you need on woodprix.

@destinydana959 4 года назад

Is there no goddamn video on HOW TO PUT THE PANEL BACK ON??????

@GarageBoys 4 года назад

Same process but in reverse.

@destinydana959 4 года назад

@@GarageBoys yes but i am telling you it just won't f*ing work. I tried to fix my neighbors window, it was off track, took a while but i fixed it, except (drivers side) the left part keeps coming out of the track, so i added some adhesive and im letting it dry. I try to put the panel back on and NO MATTER HOW I put the panel on it wont align with the screwholes. I try from the top first then i tried to shimmy it, finangle it, hammer it, checked too see if there was anything in the way... etc... i ended up putting the plastic rivet things through and forcing it to stay still long enough to close the door

@destinydana959 4 года назад

@@GarageBoys btw besides this very frustrating part im dealing with, your video was helpful, thank you

@GarageBoys 4 года назад

That’s weird, there must be something interfering with the panel or maybe something reinstalled backwards or something bended. But I’m just shooting blanks, it’s hard to know without looking at it.... good luck

@destinydana959 4 года назад

@@GarageBoys thanks, maybe i can take a short video and show you sometime. I was just getting frustrated sorry if i seeemed rude, nothing more frustrating than working on someone elses vehicle and its not doing what it supposed too. I seen 2 videos on putting the panel back on and it just wont do the same for me. The window was a quarter up does that matter? I didnt have the keys for that part.