How To Remove Electronic Components - PART 1 / Soldering Tutorial

Подписаться 86 тыс.

Просмотров 405 тыс.

50% 1

How to remove Electronic components is a neat guide showing common and uncommon methods to remove your soldered devices.
Including examples such as QFP + QFN IC removal and an easy AWESOME method for removing your header connectors. Also featuring various ways to remove Electrolytic capacitors including a really cool easy uncommon method , you will really love this one.
Part way through the video see how you can protect your plastic parts while using a heat gun close by with the cool silver foil tape method.
I have also posted a PART 2 of this video with more great examples of common and unusual removal methods that may help you in the future.
If you wish to see more future releases by Mr SolderFix please be sure to like and subscribe.
Thank you for your time and good luck with all of your soldering projects.
Mr SolderFix
#smdrework #soldering #pcbrepair

Наука

Опубликовано:

24 окт 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 499

@deanjohnson9646 11 месяцев назад

This is a FANTASTIC video! Makes what I have always believed to be huge problems look so easy to solve!

@mrsolderfix3996 11 месяцев назад

Hi , thank you for your comment, very much appreciated. I'm glad you enjoyed the video . If my channel can help a few people out with their soldering issues then that's great . Thanks again , take care 👍

@MeitsMSX Год назад

I really liked the thick wire against the 5 pin connector. It's so simple, but someone's got to come up with the idea. Thanks for that idea.

@mrsolderfix3996 Год назад

Hi , thank you for your comment, much appreciated. Yes it really is a simple trick and it does work so easily as shown in the video . It's much safer than trying to remove all the solder from the barrels around the pins. I'm glad you enjoyed it . Thanks again , take care 👍

@romancharak3675 Год назад

That was my WOWEEE moment too!

@mrsolderfix3996 Год назад

Hi , thank you, I'm glad you found the video of use 👍

@MeitsMSX Год назад

@@mrsolderfix3996 I haven't been in the situation yet, but when I run into it, I'm going to use it. This was (for me) so out of the box that it will be remembered. So please go on and keep on surprising your viewers with new tricks :)

@mrsolderfix3996 Год назад

Hi , thank you for your comment, I will keep posting when I can , hopefully the videos continue to be of use to people . Thanks again , take care 👍

@olavrask9729 11 месяцев назад

You have a great calm style of explaining - super clear - thank you!

@mrsolderfix3996 14 дней назад

Hi , thank you for watching the video and commenting , very much appreciated 👍

@supermick83 Год назад

Very hypnotic watching the best methods of removing all those components. Great video 👍

@mrsolderfix3996 11 месяцев назад

Hi , thank you for watching the video and commenting, very much appreciated. I'm glad you enjoyed it . I've posted a few other removal videos with another one being posted shortly , hopefully these can help a few people out . Thanks again , take care 👍

@matambale Год назад

Appreciate one really important reminder: be patient. Thanks for another great video, Mr. SF

@mrsolderfix3996 Год назад

Hi , thank you for your comment, much appreciated. I'm glad you enjoy the videos , take care 👍

@extremedry3379 Месяц назад

Your channel is the first channel attracts my eye and not waste time to watch your video. Your are really straight forward and practical, while other videos with the same subject drives me confused. They talk too much about tools, theory, and impractical. But your channel is straight forward, I can copy and do it on my own after watching your video with ease. I was curious much on how to repair the PCB, and one of your videos solved my curiousity. Hope you can have more videos on how to repair and rework the PCB.

@mrsolderfix3996 Месяц назад

Hi , thank you for supporting my channel , your time is very much appreciated . If my videos can help a few people out with their soldering / desoldering issues then I'm happy . I will always post some more videos when I get some spare time . I'm glad you enjoy my channel , thank you again for your kind words , take care 👍

@dime666bag Год назад

That single row pin connector trick was amazing ! Cheerz .

@mrsolderfix3996 Год назад

Hi , thank you for your comment , much appreciated. Yes it does work really well and can work for some 2 row headers if all the pins are close together and can be heated at the same time. Thanks again , take care 👍

@petersmith5199 Год назад

Loved that! The two iron job is great. Well done Guv!

@mrsolderfix3996 Год назад

Hi , thank you, I'm glad you enjoyed the video 👍

@jeffreystroman2811 Год назад

You are the man, takes a lot to show me something I don't know and that's what you have done

@mrsolderfix3996 Год назад

Hi , thank you for your comment , very much appreciated. I'm glad you enjoyed the video , I'm still seeing things these days that I've never seen , I've always said no one knows everything , but if we can all share knowledge and ideas then that would be great . Thanks again for your support , take care 👍

@horusfalcon 11 месяцев назад

Another fine instructional video. It looks like you are using a cable tie end as an applicator for the flux. That's good use of materials at hand.

@GDJrides Год назад

Really helpful video. Using the bit of wire for the connector is a great idea. I have a 4 day SMT rework course coming up and this has helped me get a head start. Cheers

@mrsolderfix3996 Год назад

Hi , glad you enjoyed the video . I've got plenty of other videos on soldering on my channel ( you probably know this ) the claritys got better as I've gone along . Maybe some of these can be of use to you . I hope you get on ok with all your courses , projects etc , thanks again , take care 👍

@electron7373 Год назад

Really excellent tutorial - lots of must know tips and tricks! Thanks so much.

@mrsolderfix3996 Год назад

Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video, hopefully it can help a few people out with their soldering issues. I've posted a few rework videos on RU-vid now with other great methods that may be of use . Thanks again , take care 👍

@denniscoburn5801 3 месяца назад

Nice work! I can’t believe I never thought of applying additional flux to solder braid or of using aluminum tape to shield other components! Thanks for a great video.

@mrsolderfix3996 3 месяца назад

Hi , thank you for watching the video and commenting , very much appreciated . I'm glad you found the video of use , great to hear that . Thanks again , take care 👍

@sih9696 10 месяцев назад

Never thought of two irons. This opened my eyes! Thanks for sharing!

@mrsolderfix3996 10 месяцев назад

Hi , thank you for your comment, much appreciated. I love using 2 soldering irons together, this method is so easy for certain situations. In fact I posted a complete video on RU-vid a while back dedicated to the 2 iron method. Thanks again for your support of my channel , take care 👍

@2UGoodHealth Год назад

Today was the first time I found your channel, as an old tech dog I was still able to learn a couple of new tricks. That encouraged me to subscribe to your Channel. My early days of triodes and transistors was no preparation for smd work. Enjoyed your video.. keep it up. Thanks again.

@mrsolderfix3996 Год назад

Hi , thank you for your comment, much appreciated. I'm glad you found my channel and enjoyed the video . I've tried to improve my videos as I've gone along ( my early ones are definitely not as clear as my later ones ) , hopefully some of them prove useful for you . Thanks again and good luck with any soldering projects you take on 👍

@RICHARDT193 Год назад

Another great video, i especially liked the two iron method, that will come in handy as i have a few to replace on some Roland synth expansion boards, also the trick of using the wire to increase the heat coverage from the single iron, simple but so effective! Thanks again.

@mrsolderfix3996 Год назад

Hi , thank you for your support of my channel , very much appreciated. Hopefully I can help a few people out with my videos. Thanks again , take care 👍

@surgingcircuits6955 Год назад

Very Good techniques. Especially liked the in-line pins removed with a wire trick. Very helpful. You can teach old dogs new tricks. TY

@mrsolderfix3996 Год назад

Hi , thank you for your comment, very much appreciated. I'm glad you enjoyed the video , if I can help a few people out then I'm happy . Thanks again , take care 👍

@karinje2208 11 месяцев назад

Bow Wow ❤

@theviperman3 Год назад

Very informative .... I've been trying to remove electrolytic caps on a retro console without damage and this video illustrates some very good practices. Thank you for sharing

@mrsolderfix3996 Год назад

Hi , thank you for your comment, much appreciated. I'm glad the video proved helpful to you and hopefully you get on ok with your soldering projects. Thanks again , take care 👍

@brizpc 3 месяца назад

Brilliant technique and excellent photography. I enjoyed learning something new, thank you. All the best.

@mrsolderfix3996 3 месяца назад

Hi , thank you for watching the video and commenting , very much appreciated . I'm glad you enjoyed the video and found it useful , hopefully it can help a few people out with their desoldering issues . Thanks again , take care 👍

@middleway1885 Год назад

Cheers! Thanks for all the interesting episodes, sharing all your knowledge and experiences...

@mrsolderfix3996 Год назад

Hi , thank you for your comment and support, very much appreciated. I'm glad you enjoy the videos and find them useful. If I can help a few people then that's great . Thanks again and good luck with all of your soldering projects 👍

@supersilve Год назад

Thanks for the informative video, you make it look so easy :) Sometimes I encounter SMD resistors, capacitors and even chips that are glued to the board and at times its a nightmare to remove them. ( I am mentioning the little glue bead under the component). I am asking if you have any method when you come to removing glued components. Thanks.

@aliveandwellinisrael2507 Год назад

Great video. Anything with 8 or more pins has been a pain in the past, but these methods should make it much easier.

@mrsolderfix3996 Год назад

Hi , it definitely is a good method . I will probably post another video on RU-vid soon showing more examples of where this method can be used . Thanks again for your time , take care 👍

@deplinenoise Год назад

Loved the 5 pin TH trick basically taking out of the board. Great stuff!

@mrsolderfix3996 Год назад

Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video , the wire trick along the pins really is a simple effective method . Hopefully these rework methods and ones shown in my other videos can help people out . Thanks again , take care 👍

@MrRawUK 7 месяцев назад

These videos are super helpful!

@mrsolderfix3996 7 месяцев назад

Hi , thank you for your comment , it's very much appreciated . All I want to do is help a few people out with their soldering / desoldering issues , if I can then that's great . Thanks again , take care 👍

@AstonsVintageTechnologyWorkshp Год назад

Did a quick 2-soldering iron tutorial for SMD caps a few years ago, but it's nice to see someone else doing it too. It's good to see soldering techniques being passed on, it's the foundation for long-lasting work. I must find the time to do more videos.

@mrsolderfix3996 Год назад

Hi , thank you for your comment, much appreciated. I'm glad you agree on the 2 iron method , I just love using 2 irons for lots of different soldering situations. If you do start posting more videos I hope they go well for you . Thanks again for your comment , take care 👍

@KY4K-10 10 месяцев назад

I have to say….. I used the two iron method before as well. Nice video I enjoyed it.

@mrsolderfix3996 10 месяцев назад

Hi , thank you for your comment, much appreciated 👍

@villcrs4110 5 месяцев назад

2 irons are awesome, i also realised with hands on approach that 2 heat guns can do also miracles for desoldering. I had to desolder 12 points toggle switches and some SMB connectors. With one, i fried the boards until they desolder, with 2 job done fast. Mind you about the switches, the footprint was wrong, they made contact but didnt pass through-hole. So they where soldered with 138 degrees paste poured all over the contacts on a hot plate. So it was not as strong bind as if the switch fit the footprint.

@tylercoombs1 Год назад

I've never seen the use of two soldering irons. It looks like a really quick and effective way to remove components. I definitely got to give it a go, thanks!

@mrsolderfix3996 Год назад

Hi , thank you for your comment, much appreciated. I love the 2 iron method so much that I've posted a complete video on my RU-vid channel showing all the benefits of using 2 irons . Is definitely one of the best things to help with soldering I've ever learnt. Thanks again , take care 👍

@tylercoombs1 Год назад

@@mrsolderfix3996 Oh fantastic! I'll take a look. Thanks a lot!

@mrsolderfix3996 Год назад

Hi , no problem , thanks for your support 👍

@aliveandwellinisrael2507 Год назад

I've seen devices that have, essentially, a tweezer thing on a soldering iron lol. Achieves the same result, but if you have a second iron, no point in buying a third!

@mrsolderfix3996 Год назад

Hi . You can buy soldering tweezers but personally I much prefer using 2 irons as if you need to for example bring the irons in from different angles you can do , whereas with the soldering tweezers you cannot achieve this , so for me 2 irons is a much better option.

@chrisalexthomas 11 месяцев назад

This is amazing, you make it look so easy, I'm new to this stuff and I still have trouble wicking away solder, it doesn't seem to melt :( but I'm getting much better each try! thanks for posting this up!

@mrsolderfix3996 10 месяцев назад

Hi , thank you for your comment, much appreciated. The more you can practice your soldering you will definitely get better . The main things are a decent iron tip , correct size solder for the job you are doing and flux . Hopefully I cover a lot of the things that are important in my videos so stick with it and watch yourself improving daily. Thanks again , and good luck with all of your soldering projects in the future 👍

@nohrtillman8734 7 месяцев назад

Try soldering the wick just a little to help get the heat transfer started. Once the flow starts it will slurp it right off the component/board.

@jameshorn7830 11 месяцев назад

Watching this video was so relaxing... Great camera work!

@mrsolderfix3996 11 месяцев назад

Hi , thank you for your comment, very much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out with their soldering issues. Thanks again, take care 👍

@steveng5503 Год назад

Not a solder pump insight. Nicely demonstrated. 👍🇬🇧

@mrsolderfix3996 Год назад

Hi , thank you for your comment, much appreciated. I'm not a big fan of solder pumps , I've probably mentioned it in a few of my videos , I much prefer solder braid , personal choice I guess. Thanks for watching , glad you enjoyed it , take care 👍

@cesarcantoral6100 Год назад

you put out some good info not seen in other channels .....good work

@mrsolderfix3996 Год назад

Hi , thank you for your comment, very much appreciated. I'm glad you enjoy the videos , if I can help a few people out with their soldering issues then that's great. Thanks again , take care 👍

@Skunkola Год назад

Brilliant as ever, always something to learn from your videos thank you. Shared on twitter incase it's helpful to anyone.

@mrsolderfix3996 Год назад

Hi , thank you for your support of my channel and for sharing it. I don't really do enough to promote the channel , maybe I should do a bit more so it's been good you've helped me , thank you 👍

@Maveric193 4 месяца назад

Happy new year Thank you for your time to go into detail how to remove these components. I like the two soldering iron method. Please could you advise whether two 80 watt digital temperature adjustable soldeting irons would work ok for the small components or whether they would be to much? Im thinking of buying a couple from a well known auction site. I only have a 15 watt and 30 watt fixed temp irons and i have smoked nearby components in the past. Would you recommend upgading as they are only about £20 each. Thank you for your time. Have subscribed and look forward to more videos.

@rockymountainhiker8119 Год назад

I've been contemplating how to remove a battery that is soldered onto a circuit board. It has two tabs, one on each side. Your suggestion to use two soldering irons is, well, brilliant!! Now I can't wait to get to it. Thank you!

@mrsolderfix3996 Год назад

Hi , thank you for your comment. 2 irons is a great method that I use a lot . Just be careful with your battery as sometimes they can overheat and pop , hopefully you will be ok . If you do it fairly quickly should be fine. Thanks again , take care 👍

@goodun2974 11 месяцев назад

When desoldering a battery, be sure to wear eye protection; I've encountered battery-electrolyte leakage that sparks and spits when heat is applied to the solder joints, even when the battery measures stone-dead. BTW, If the battery has any voltage left on it, cut the battery out with side cutters if possible and unsolder the two terminals separately,

@mrsolderfix3996 11 месяцев назад

Hi , thank you for your comment, much appreciated. Definitely good advice you've given there , we can all help each other so thank you for that 👍

@uricohen5463 9 месяцев назад

what swizers you use they look good

@arronthomas68 Год назад

Very well explained. I'm trying to learn it your presentation makes a lot of sense. Cheers.

@mrsolderfix3996 Год назад

Hi , thank you, I'm glad you enjoyed the video and found it useful 👍

@larseivindwelle Год назад

Great video! Thanks 👍. Question: What kind of tool do you use to see all these small parts? A microscope? If so, what kind?

@johnwest7993 Год назад

I always tell people to use much more solder to desolder than to solder. An important reason to clip off the used solder braid instead of just working your way up to clean braid is that the used braid draws away the iron's heat, and you don't want that to happen. This is the only one in the series I've seen as yet, but it's clearly a very good instructional video series with professional video standards, and I will suggest my soldering class students watch it. Thank you. What camera setup are you using for these great close-ups of what's happening? It looks like it's perfect for this kind of work, and for inspection as well.

@karinje2208 11 месяцев назад

And it is always a good idea to minimize any tool or materials (i.e. flux, hot braid) contact with the wafer board. Non?

@mrsolderfix3996 11 месяцев назад

Hi , I personally use lots of flux , soldering is so much easier and you will definitely get better joints with flux without it you will struggle at times. Thanks for your comment 👍

@karinje2208 11 месяцев назад

@@mrsolderfix3996 You are very welcome. I remember when I started, the flux residue could cause damage. I was curious if you had a preferred cleaner to use ? Thank you for your attention.

@mrsolderfix3996 11 месяцев назад

Hi , thank you for your comment. The flux I have used for many years is SMFL200D , a non clean , non corrosive flux , so if any remains on the PCB after cleaning you will be ok . Unfortunately it's been discontinued recently. Old style flux if left on could cause electrical shorts as it could cause joints to grow solder fingers , but that was long ago. I have posted a video on RU-vid showing my preferred cleaning fluids and how I clean boards . All the information is in that video . Thanks again, take care 👍

@Pathankot_ 9 месяцев назад

Thanks 💗 for sharing beautiful knowledge about Removed components from p.c.board

@mrsolderfix3996 9 месяцев назад

Hi , thank you for watching the video and commenting , your support is very much appreciated 👍

@ursopolar6535 8 месяцев назад

Excellent work!

@mrsolderfix3996 8 месяцев назад

Hi , thank you for watching the video and commenting , very much appreciated 👍

@saidbaci4344 Год назад

Just brilliant, wonderful. Thank you for sharing.

@mrsolderfix3996 Год назад

Hi , thank you for your comment, very much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out with their soldering issues. Thanks again , take care 👍

@cann0nf0der Год назад

So many good tips, love your videos mate thank you 👍

@mrsolderfix3996 Год назад

Hi , thank you for your support, much appreciated. I'm glad you enjoy the videos , if I can help anyone then I'm happy . I will always post more videos when I get some spare time . Thanks again , take care 👍

@kennith. Год назад

Very informative video, I specially enjoyed the blue through hole wire method.

@mrsolderfix3996 Год назад

Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out . Thanks for supporting my channel , take care 👍

@leifjansson8074 3 месяца назад

Absolutely amazing video!! Thank you very much for sharing years of experience! 🙂

@mrsolderfix3996 3 месяца назад

Hi , thank you for your comment , your support is very much appreciated . I'm glad you enjoyed the video , hopefully it can help a few people out , if it can then I'm happy . Thanks again , take care 👍

@CarlosMartinez-px9xo 11 месяцев назад

hi, amazing videos, i used to work, and i do for training and for hobby, fixing my old stuff, i have a project to rebuild and old technics amplifier, but most modern circuit, multilayer and big ground pads for disipattion has been very struggling for me, i want to know, what brand of tin, braid, and if you use tin sucker for clean pads, because it's no easy to clean the with sucker even without the pin inside

@NightVisionOfficial Год назад

Really satisfying, one of the best video out there for people that loves "asmr" like video for desoldering :)

@mrsolderfix3996 Год назад

Hi , thank you for your support, very much appreciated. I'm glad you enjoyed the video and hopefully other people find it enjoyable as well . Thanks again, take care

@lww3988 Год назад

Thanks for your teaching, very useful! fans from Taiwan

@mrsolderfix3996 Год назад

Hi , thank you for watching the video, much appreciated. Hopefully I can help a few people , take care 👍

@kimgyzerelectronics4144 6 месяцев назад

This is so relaxing to watch.

@mrsolderfix3996 6 месяцев назад

Hi , thank you for watching the video and commenting , very much appreciated 👍

@TOM452 Год назад

You’ve great skills and can teach very well, subbed!

@mrsolderfix3996 Год назад

Hi , thank you for your support, it's very much appreciated. I'm glad you enjoy the videos and you find them useful . Thank you for subscribing 👍

@davidcross30 8 месяцев назад

What temperature do you tend to run your iron at?

@andreyace8768 9 месяцев назад

That's great! Thank You very much!!! Peace and good to You!

@mrsolderfix3996 9 месяцев назад

Hi , thank you for watching the video and commenting , much appreciated 👍

@chelikan 2 месяца назад

You make it look so easy!!, thanks for the tips

@mrsolderfix3996 2 месяца назад

Hi , thank you for watching the video and commenting , much appreciated . Plenty of practice and you get to know what works and what doesn't. Also you learn what thickness solders are best ( I only really use 0.25mm and 0.5mm sizes ) , different tips for each specific job , these sizes will become known to you . If my videos can help people along the way then I'm happy . Thanks again , take care 👍

@berryj.greene7090 8 месяцев назад

Great video coverage

@mrsolderfix3996 8 месяцев назад

Hi , thank you for your comment , much appreciated . I'm glad you enjoyed the video 👍

@wouter_h Год назад

Thanks mate! Very useful. Love to see more

@mrsolderfix3996 Год назад

Hi , thank you for your comment, much appreciated. I will hopefully post another video shortly showing a few more removal methods . Thanks again for your support 👍

@ydonl Год назад

Nice information and techniques, as always! I've had trouble with the heat gun melting solder in the small parts surrounding a big chip I was trying to remove. I get the impression from your demonstration that I should concentrate more on the "inner" parts of the big chip; maybe just a little air out onto the pins, but... most of the heat is going to flow through the chip's package out into the leads, instead of trying to heat up the pins directly. Does that make sense? Is it right?

@mrsolderfix3996 Год назад

Hi . I occasionally get small parts surrounding the IC that's being removed melting as well so if I'm worried parts will shift I usually put a silver foil tape ( sticky backed ) over these parts protecting them from the heat so the solder on them won't melt. Some people use Kapton tape for this but heat will go through Kapton and the parts will still unsolder and potentially move. You are right , go round the edge to warm the area then concentrate on the centre . Hope that helps 👍

@trevorwoods3367 Год назад

Amazing. Just the help I needed. Thanks.

@mrsolderfix3996 Год назад

Hi , thank you for your comment, much appreciated. I'm glad the video was of use to you . Good luck with all of your soldering projects in the future , thanks again , take care 👍

@TheIronHeadRat Год назад

Great stuff as always , thank you 👍

@mrsolderfix3996 Год назад

Hi , thank you for your support of my channel , I'm glad you enjoyed the video 👍

@Universallaws776 Год назад

Thanks. Very net and efficient and effective and more to the point

@mrsolderfix3996 Год назад

Hi , thank you for your comment, much appreciated 👍

@fwflyer78 Год назад

Nice work! Very educational!

@mrsolderfix3996 Год назад

Hi , thank you for your comment , much appreciated. If I can help a few people with their soldering then that's great. Thanks again 👍

@petepnut 11 месяцев назад

Excellent tips.... For aluminium tape - Screwfix (and others) 2" Plasterboard Tape. Its also great for RF Shielding inside Platic Housings. It makes conductivity when layers are stuck to each other.............

@kermitinmountain6371 3 месяца назад

Thank you for the educational video, where do I buy very thin needle pointed solder tip? Do I need to run by lathe to make it smaller? I bought a few electronic item from China, but the problem was: the pins of chip was off centered and wasn't lined up properly onto pcb strip which it won't work. Will the heat gun help lined up the pin legs to pcb strips? Thank you.

@Johadart Год назад

Very informative video, cheers mate, keep up the great content. 🤙🏼🇦🇺

@mrsolderfix3996 Год назад

Hi , thank you for supporting my channel , very much appreciated. I'm glad you enjoy the videos , I will keep posting while people seem to find them useful . Thanks again , take care 👍

@Somanathan-hj7ge 8 месяцев назад

Fantastic sir, very best method s,to removing electronic parts, very very good 💯😊 thankyou sir

@mrsolderfix3996 8 месяцев назад

Hi , thank you for watching the video and commenting , your support is very much appreciated 👍

@naderhumood1199 Год назад

That was first class of work..., Sir....what is your microscope brand.. I'm planning to go for one. Thank you very much indeed.

@florenbaron7111 8 месяцев назад

Do you have any advice about obtaining good value tools? How do I purchase a chip kit, so I can replace parts with new ones? What are they called? Thank you.

@Viking8888 Год назад

I really enjoyed this tutorial. I have a dead USB controller on a Raspberry Pi 4 I need to replace from a donor board and I've been putting it off. I'm going to do A LOT of practice before moving on to the actual part using your methods. Thanks so much for this.

@mrsolderfix3996 Год назад

Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video and found it useful . I have many videos on my channel showing all different aspects of soldering , maybe some of these will be of use to you . Thanks again and good luck with all of your soldering projects 👍

@undercrackers56 8 месяцев назад

Any idea how to remove a couple of 0402 SMT resistors from a six-layer PCB? I tried soldering irons, heat gun and ChipQuick. The problem is that the component density is quite high, giving very little room to work and the six-layers seems to soak the heat away and threatened to delaminate the top tracks.

@mingosutu 2 месяца назад

Nice tutorial especially the five pin trick. Good job

@mrsolderfix3996 2 месяца назад

Hi , thank you for watching the video and commenting , very much appreciated . I'm glad you enjoyed the video and found it useful , that's great to hear . Thanks again , take care 👍

@moseswally Год назад

Nice vid. What magnifier are you using?

@uricohen5463 9 месяцев назад

amazing video , what pads you use to clean the board , and what temperature do you use on the soleding iron

@mrsolderfix3996 9 месяцев назад

Hi , thank you for your comment , much appreciated . The cleaning pads I use are called Gtek dry wipes from a company in England called Grove Sales . Unfortunately I don't think they ship these overseas . The cleaning fluid I dip them in is called Ultrasolve . The irons I use in my videos are Weller TCP S , which are 50 watt . If I'm doing leaded soldering I use about 330 degrees Celsius and for lead free I use about 360 to 370 degrees Celsius . Hope that helps , thanks again for your time 👍

@ytrew9717 Год назад

exactly what I was looking for, thanks a lot!

@mrsolderfix3996 Год назад

Hi , thank you for your comment, I'm glad the video is of use to you . Take care 👍

@ficklebar 4 месяца назад

4:00 As a newbie, I couldn't help cackling when the second soldering iron appeared on screen 😂 It's so simple!

@mrsolderfix3996 4 месяца назад

Hi , thank you for your comment , much appreciated . 2 irons really is a great method , in fact I've done a total video on my channel showing the benefits of using this method . Thanks again for your support, take care 👍

@fuzzs8970 Год назад

Excellent. Soldering is an art like thing.

@mrsolderfix3996 Год назад

Hi , thank you for your comment . I hope my videos can help a few people out , hopefully we can all get better , take care 👍

@scottmerriman8549 Год назад

Another excellent video! Thank you!

@mrsolderfix3996 Год назад

Hi , thank you for your comment and support, very much appreciated. If I can help a few people out with any soldering issues then I'm happy . I'm glad you enjoyed this video , thanks again , take care 👍

@paranoidgenius9164 Месяц назад

Very neat & clean. I have scrap circuit boards up the ass, so I have plenty of scrap stock to work with & I would probably be able to build my own homemade devices which I've always wanted to do.

@YL-mc9oz 8 месяцев назад

Hello, I really enjoyed the video and the explanations. I am not a professional in the field and I wanted to please ask what is the reason for putting FLUX before heating with hot air or working with a soldering iron ? Thanks in advance

@mrsolderfix3996 8 месяцев назад

Hi , thank you for your question. Solder already has a thin core of flux inside it but as soon as it's heated it tends to burn away before the joint is fully formed . Adding a layer of external flux before soldering extends the flow time giving you a much better chance of a nicely shaped , flowed joint . If you ever have solder spikes and your struggling to get rid of them add flux , reflow and they will be gone . Hope that helps , thanks again 👍

@YL-mc9oz 8 месяцев назад

@@mrsolderfix3996 Thank you very much for the detailed and professional answer

@mrsolderfix3996 8 месяцев назад

Hi , no problem , all the best 👍

@VariaGaming Год назад

For the electrolytic capacitors I found if they are really old and have leaked on to the board it is easier to put some pressure on the cap and then just cut them with some wire cutters near the bottom and just pick off the left over.

@thomasheckhaus205 8 месяцев назад

I'm an old timer, I have an older Weller station that was for older vacuum (Valve) technology and also used for early transistor technology. It has tip temperatures in the 700f range. Now with SMD I have a lot to learn. I've been watching many of your videos and have learned a lot. I've also subscribed. I do have a few questions, if you don't mind. I see I'll have to buy a lower temperature soldering station. Is there any particular Flux and braid you can recommend? I have a liquid rosin Flux I assume that will do. I see the braid is about 2mm wide, will that suffice for surface mounting removal and pad cleanup? Thank you I certainly appreciate any assistance you can give. Regards and Thank you.

@oahuhawaii2141 4 месяца назад

FYI, I've heard this host say in another video he uses a setting of 380⁰C (716⁰F) -- he sounds like he's from the UK, which uses metric most of the time.

@amayii0 Месяц назад

@@oahuhawaii2141 Thanks for temp tip, it was looking so easy, I tried sticking to 350°C, that's why it looks faster/easier I guess

@chrispotts2010 Год назад

What a great video! Full of really useful information and tips AND, at last, a channel that DOESN'T use the word SODDER. Thanks for your excellent tutorial.

@mrsolderfix3996 Год назад

Hi , thank you for your support of my channel , very much appreciated. I'm glad you enjoyed the video and hopefully found it useful. Thanks again , take care 👍

@nazeerabdulrahuman9526 9 месяцев назад

Very useful video Thanks

@mrsolderfix3996 9 месяцев назад

Hi , thank you for watching the video and commenting , much appreciated 👍

@suntan8655 11 месяцев назад

Great explanation and techniques.

@mrsolderfix3996 11 месяцев назад

Hi , thank you for your support of my channel, much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out with their desoldering issues. Thanks again, take care 👍

@davefoskett2418 3 месяца назад

Thanks for your vids, very helpful. I've just started soldering as a hobby in my spare time and finding tips and tricks to help me along. What do you use to wipe the flux off after you've wicked the pads?

@mrsolderfix3996 2 месяца назад

Hi , thank you for watching the video and commenting , much appreciated . I've posted a complete video on my channel showing all the consumables I use for cleaning such as cleaning cloths , cleaning fluids and one special item , a hairdryer . This video may help you massively as this method I use is now adopted by many , many people I work with on a daily basis . Thanks again and good luck 👍

@johngulliver6151 Год назад

Very good informative video, thanks for posting

@mrsolderfix3996 Год назад

Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video, hopefully it can help a few people out with their soldering issues. Thanks again , take care 👍

@niconine268 2 месяца назад

Thankyou for the tutorial. Very useful

@mrsolderfix3996 2 месяца назад

Hi , thank you for watching the video and commenting , your support is very much appreciated 👍

@thehobbit2422 5 месяцев назад

thanks for sharing your professional skill 🙇

@mrsolderfix3996 5 месяцев назад

Hi , thank you for watching the video and commenting , much appreciated . Hopefully my channel can help a few people out with their soldering / desoldering issues , if it can then that's great . Thanks again , take care 👍

@user-yd7eq5ke5p 4 месяца назад

satsfying to watch !

@mrsolderfix3996 4 месяца назад

Hi , thank you for watching the video and commenting , very much appreciated 👍

@speedbird737 9 месяцев назад

excellent thank you!

@mrsolderfix3996 9 месяцев назад

Hi , thank you for watching the video and commenting , much appreciated 👍

@MKINDYR107 6 месяцев назад

Spot on video, thank you. Can't wait for something to fail now.........

@mrsolderfix3996 6 месяцев назад

Hi , thank you for watching the video and commenting , very much appreciated 👍

@zhenyakostenko2467 6 месяцев назад

Cool guide! What flax you use?

@ResistCircuitResist Год назад

Home made de-soldering braid, you get an upvote and sub. Excited to see what other goodies you have.

@mrsolderfix3996 Год назад

Hi , thank you for your support, much appreciated. Hopefully you find some of my other videos of use . Thanks again , take care 👍

@Briganteman 3 месяца назад

Proper Wow moments in there Sir :)

@mrsolderfix3996 3 месяца назад

Hi , thank you for watching the video and commenting , very much appreciated 👍

@castlecodersltd 10 месяцев назад

I really enjoy your videos, they've helped me loads, thank you. Which foil do you use please? ☺

@mrsolderfix3996 9 месяцев назад

Hi , thank you for your support of my channel , very much appreciated. I use an aluminium adhesive lined tape made by 3M . Advance tapes also do a good one . Thanks again , take care 👍

@trone32 Год назад

Some great tips here thank you I had issues with boards popcorning, I think my heat was too high with a low airflow, after watching your video

@mrsolderfix3996 Год назад

Hi , thank you for your comment. Good luck with all your soldering projects in the future 👍

@megeezer69 Год назад

Excellent tutorial

@mrsolderfix3996 Год назад

Hi , thank you for your support, very much appreciated 👍

@Mark-ce4rz 10 месяцев назад

Great videos, had a fair bit it trouble with multi pin devices until I came across your videos. It looks like you run a fairly hot soldering tip, what range do you use? I'm typically around 365deg c and get really concerned about damage to any tracks or pin holes. (Clearly not practicing enough:) )

@mrsolderfix3996 10 месяцев назад

Hi , thank you for your comment , much appreciated. If I'm doing leaded soldering I would use roughly 330 degrees Celsius and for lead free I would use roughly 360 to 375 degrees Celsius I may vary these slightly for certain jobs but overall I try to stick to these temperatures. Hope that helps , thanks again 👍

@brylemacanin3321 8 месяцев назад

very informative vid.

@mrsolderfix3996 8 месяцев назад

Hi , thank you for watching the video and commenting , very much appreciated . Hopefully it can help a few people out , if it can then I'm happy . Thanks again , take care 👍

@ghassanali8144 Год назад

thanks for this great tutorial

@mrsolderfix3996 Год назад

Hi , thank you for supporting my channel , very much appreciated 👍

@de-bodgery 8 месяцев назад

I'm fixing a bunch of boards with dual copper plains inside them. They take a lot of heat! I'm preheating the boards, using lots moire heat in my hot air and lower air speed to get the solder at the parts to flow. How would you handle this?

@mrsolderfix3996 8 месяцев назад

Hi , thank you for your comment . I use a hot air gun on lots of multilayer boards and the one thing I've found is I've had to up the temperature for a lot of component removals to 420 - 450 degrees Celsius . I always protect nearby parts like plastic connectors, LED's , and also the edge of the PCB with aluminium adhesive backed foil . Amazing stuff . I have found if I'm struggling with the hot air station and I've upped the temperature a lot I then turn the air up . This can do the trick , I hope you get on ok . Thanks again 👍

@de-bodgery 8 месяцев назад

@@mrsolderfix3996 I'll try a higher CFM. I tend to keep the CFM low for reflowing tiny parts so they don't blow away. I pre-heat quite often as that gets those large copper inner layers warm enough to keep them from sucking away too much heat. I do have aluminum tape...this is a great trick.

@jonathanbuzzard1376 Год назад

Any tips for components that are soldered onto either ground or power plains? All the copper in the plains just seems to suck all the heat away.

@garymucher4082 Год назад

Some pretty interesting methods. If you are not looking to replace any of those components back on, you always have the option to cut the leads and remove the component and than remove the individual leads one at a time... Done that a lot...

@mrsolderfix3996 Год назад

Hi , thank you for your comment, much appreciated. Your right cutting the legs is an option if you don't need the component anymore. I actually showed this exact option in one of my earlier videos ( 4 ways to remove smd IC ) and like yourself I too have used this method on numerous occasions . The one thing I would remind people is check whether the part has a thermal pad underneath because then you would need the hot air rework method . Thanks again , take care 👍

@kuyaferdskievlog 10 месяцев назад

Thanks for sharing your ideas it's to very helpful to the newbie like me. Great video tutorial lods God bless ang more power to your channel. ❤

@mrsolderfix3996 10 месяцев назад

Hi , thank you for your comment , very much appreciated. I'm glad you enjoy the videos , hopefully they can help a few people out with their soldering / desoldering issues. Good luck with all of your soldering projects in the future and thanks again 👍