No video :(

How to remove HTV without chemicals

Подписаться 156 тыс.

Просмотров 810 тыс.

50% 1

99% of the vinyl I use on my channel is Specialty Materials Brands I have tried many kinds over the years, and they are my absolute favorite. The quality is top-notch, I have a video where I wash a shirt 50 times, and the vinyl still looks brand new. • Thermoflex vs. Siser: ... They have the most extensive range of products and colors around ( there are over 90 colors in the ThermoFlex Plus and GlitterFlex Ultra lines alone). They also offer free product samples on their website, which you don’t see anymore. Trust me, request a sample because if you try it, you will know why I love it.
Request a Free Sample:
specialtymater...
Specialty Materials :
specialtymater...
* I DO GET FREE PRODUCTS TO TEST SPECIALTY MATERIALS TO TEST, BUT I STILL PURCHASE 95% OF MY VINYL. I WILL ALWAYS TELL YOU WHAT YOU GET FOR FREE. *
Artwork created by me (unless otherwise noted) is available on my Patreon page:
/ betsygotcher
Affiliate Links (I Earn a Small Commission if You Use Them) :
My Amazon Store (Has most of the things I use unless I state otherwise) :
www.amazon.com...
Vinyl, Heat Press, and Cutters :
Non-Affiliated Links:
HeatTransferVinyl.com (carries all Specialty Materials Products):
www.heattransf...
Affiliate Links (I Earn a Small Commission if You Use Them) :
Heat Press Nation :
shrsl.com/3t4xq
15x15 Heat Presses:
shrsl.com/3t4up
16x20 Heat Presses:
shrsl.com/3t4vb
shareasale.com...
Cricut:
cricut.pxf.io/...
Sublimation Blanks and Supplies:
Links (I Earn a Small Commission if You Use Them) :
Conde: Use Code: CPN-CCV22 $5 off $50 purchase:
shrsl.com/3mxhs
Koala Sublimation Paper: Use Code: Betsy15 to Save 15%
shrsl.com/3mxhk
Design Software and Commercial Use Fonts and Graphics:
Affiliate Links (I Earn a Small Commission if You Use Them) :
Creative Fabrica:
www.creativefa...
Artwork created by me (unless otherwise noted) is available on my Patreon page:
/ betsygotcher
Screen Printing:
Affiliate Links (I Earn a Small Commission if You Use Them) :
Ikonart Smart Screen Stencil: Use Code: CuttinCorners for 15% off
ikonartstencil...
Find me on social media:
Instagram: / cuttincornersvinyl
Facebook: cuttincorners
Cuttin Corners Group on Facebook: / cuttincorners
Betsy's Bees (a fun place to hang out and share your crafts): / 260612806191309
I can't thank y'all enough for sticking by me through hurricanes and health issues, and everything in between. It means the world to me all the love and support that I have received throughout the years.
XOXO,
Betsy
Specialty Materials, #cuttincornersvinyl, Heat press Nation, Cuttin Corners Vinyl, heat press nation 16x20 signature series

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 807

@depressionwhere7073 4 года назад

Every single person in my house is sleeping... me at 3 am watching how to remove prints of my hoodie 🤦🏻‍♀️😂😂

@squiishei9487 4 года назад

Did it work??

@morganwilliams4689 4 года назад

DRAWING LIKE A CHILD I just tried... it was an old one and it left residue so the pattern is still there but is very very faded

@chelsearios7865 4 года назад

Yeah same here...I have a Jeffree star hoodie I gotta remove vinyl from 😂

@leafbiome8679 4 года назад

same lmao

@Stella-ys8se 4 года назад

Chelsea Rios mine is a Shane Dawson one.. it’s one of those OHMYGOD hoodies that takes up the whole shirt but I think I’ll try it

@FeelTheDENT 4 года назад

Lmao, I thought she was about to apologize for her Texan accent.

@jansenmatsumura227 4 года назад

I thought so, too. 😅

@reyes3579 4 года назад

Ali Dent ik lol

@Lore-wv5mt 4 года назад

Me too💀💀💀💀

@iivv_nn 4 года назад

haha, same.

@evaperfecto9451 4 года назад

Same

@irenemoreaux4446 5 лет назад

I'm surprised the shirt didn't go up in flames being held on the iron for so long. Thank you for showing this.

@tomaspalacios2826 5 лет назад

Irene Moreaux 😂

@carriepalero4333 3 года назад

Sameeee with you😂

@kimberlydrake6676 6 лет назад

Wouldn’t have thought there was a way to remove....just saved money and time for all! Thank you!

@sharonspencer5493 5 лет назад

Awesome

@Ronni12Sagittarian 7 лет назад

This was EZPZ.... No chemicals, just a hot iron. Followed your instructions to a tee... perfect removal.... Thank you.

@ritastpierre2877 5 лет назад

I tried it also and it worked like a charm. So glad I found this tutorial.

@icaruslynn9753 4 года назад

I never thought it was ezpz I thought it was easy peasy

@Ronni12Sagittarian 4 года назад

@@icaruslynn9753 It took you 3 years to feel like you needed to correct someone you don't know.. What does any of that matter. Live your Life already.

@icaruslynn9753 4 года назад

@@Ronni12Sagittarian I'm sorry I wasn't trying to correct you I was just looking through the comments to see if this method works and never thought of saying ezpz it's way easier to spell

@susandorsett6988 4 года назад

Oh my stars!!!!! You literally saved my Christmas! I was adding HTV to a project that my daughter made for her nephew and it moved on my press! I didn't think I could remove it until I saw your fabulous video!!!! THANK YOU!!!!!

@carlamhaight 4 года назад

This was a life saver. Worked perfectly! I made some cotton dishtowels with cute sayings and one of the letters got messed up on one towel. Towels are 100% cotton. Then, I was admiring a project I made the other day that was glitter vinyl on polyester. There was a spot that I had not weeded. I took it to the iron which was pretty cool (having used it a few moments earlier to remove the messed up letter on the dishcloth.) I plugged the iron back in and touched the spot on the polyester pillow on the "not too hot iron" and it came off just like magic! So, if someone has a blend fabric, I would try on the lower setting recommended for your fabric and bring the temp up incrementally until the vinyl let's go! Thank you Betsy! I love your channel!

@AJafterhourz 3 года назад

I was getting so frustrated trying to find a plain patch to put over an image on a hoodie I got at a thrift store. This. Worked. PERFECT 👌. Thank you so much!

@jaelynnkupahu4738 5 лет назад

Also, I didn’t think it’ll work on the parts that were practically burned on & all warped on the material but it did. Thank you so muchhhh.

@rachelmeyer6844 5 лет назад

I know this is over a year later, but you just saved me so much time, money and aggravation! Thank you so much!

@oneda_womn4068 10 месяцев назад

I made a design for a birthday sweatshirt and forgot to weed one single letter which really upset me. I thought there was nothing I could do to save it until I came across your video. Thank you so much! Still saving projects 6 years later ❤

@marleneuribe4795 4 года назад

May the angels bless you forever!!! I customized a shirt for a cousin and messed up one of the vinyls. The shirt he brought to me was a special sports jersey and it’s not like I could just run to the store and buy another one....so as I doggie paddled through my tears of frustration and disappointment, I decided to google “hot to remove htv “ and your video popped up. The lump in my throat dissolved as the htv peeled off after watching your video!!!! Thank you (insert voice-crack and and glittery anime eyes)

@rajinderkumari7286 5 лет назад

Omg you just saved me a lot of money and heartache, I ironed on a sticker on a new expensive jacket and got it wrong , I was worried sick until I saw your video and tried it and hooray it worked so thanks you so much xxxx

@shellymartin7139 6 лет назад

Good to know as my son’s sport number change each year!

@leasmadello5702 5 лет назад

Good comment, would have never thought about that one

@bizkit4lyfe 5 лет назад

Shelly Martin soccer?

@MissBiancaRenee 5 лет назад

My son’s # just changed. He’s a goalkeeper. Just trying to save some coins.

@konrad_ludwig 4 года назад

@@MissBiancaRenee 🤦‍♂️

@jamielake905 3 года назад

Thank you sooooooooooo much. I just subscribed after I tried it and stopped crying...I was freaking over it

@patriciat2265 4 года назад

Thank you for this tutorial! It let me use the custom masks I purchased after a wedding date was moved. Just pulled off the day, left the month and year!

@anairda357 4 года назад

THANK YOU!!! My daughter asked me for a spirit day shirt for tomorrow at 10pm and I only had one maroon shirt I had messed on previously!!! Such a life saver!!!!

@gracieandrade1774 3 года назад

Hi there how long was the vinyl on the previous t-shirt before you try taking it off

@jammyn7368 7 лет назад

Thank you, thank you!!!!!! I used your method to remove vinyl lettering on approximately six shirts that had to go out tomorrow! It worked far better than the example shown. I used a tweezer and the letters came off effortlessly. You have earned my subscription :)

@chantelb4126 2 года назад

What about the residue it leaves behind

@fayebasile8792 4 года назад

I know you posted this 3 years ago but ..... You literally just saved my project. With this great trick. I’ve watched lots of your videos but after today I’m subscribed. Lol.

@scobert1999 Год назад

This method truly works. I was making hoodies for a family member and realized I put the wrong design on it. My anxiety spiked, and I thought I had to buy something to remove the vinyl. Luckily I stumbled on this video, and it saved my butt.

@indiabarlow1 3 года назад

First of all I’m mad as he*l . Am I mad about this video? NO! This video deserves a freaking 10 star rating!!!! 😭 I am mad because I tried everything on google before coming here! I’ve applied all kind of chemicals and was sad . I finally seen this and still used your method after all of it. IT WORKS! IT WORKS! Unbelievable . I had to take off a transfer picture and I literally been taking hours for nothing when this took me 10 minutes . I’m still BUMMED but I’m THANKFUL because of you! Thank YOU :)

@stephanieledezma504 5 лет назад

You just saved me 20.00 dollars by doing this for free and easy. Thank you for you help

@Ricardogomez-sn7ri 5 лет назад

Stephanie Ledezma I’m about to try it !

@jennifersimone. 5 лет назад

I was trying to use my heat press before I found this video!! Used my regular iron and it worked like a charm Thank you!!! 😁

@LetitiaOwens 6 лет назад

YOU ROCK..I am a Newbie and made a cra cra mistake and did not weed a few letters, I panic and then I searched for a video, I saw it was YOU, and I said she knows what to do...LOVE you and it worked out great! XOXO

@SuperScrapMom 7 лет назад

Thanks for this tutorial!!! Helped me save three shirts as the person didn't catch the typo in the design I sent for approval!!!

@vee5194 5 лет назад

I was so excited to give my daughter's teacher her shirt I made then I realized I left a piece that was supposed to come off. Then I thought WWBD. What would Betsy do. I remembered u had a video how to remove vinyl. I looked it up and Tada it worked. U are a life saver!!!

@Amordesuvida07 4 года назад

Life saver! Thank you so much. First time working with printable htv, following the instructions instead of common sense and burned the vinyl🤦🏾‍♀️

@terrydemie 6 лет назад

Thank you Sooooo Much. I made a 4th of July Shirt for my wife and was sadly disappointed when I popped open the heat press and had a strip of red glitter vinyl saying Hello. I had weeded my vinyl and didn't notice a very slim strip of Red Glitter Vinyl. I watched your video and was able to remove the small strip with no problem at all. Again, Thank You and have a great Memorial Day.

@trevorbenjamin6502 5 лет назад

WOW!!! This actually worked!! You saved me from having to drive all the way to the mall to buy another shirt! YOU ROCK!! Thanks for sharing!!

@jkm8113 5 лет назад

Thank you, this just saved me from having to buy a customer a new shirt. This worked perfectly for me. I only needed to removed a small line and it is totally gone.

@victoriavanhuss172 5 лет назад

Thank you for this tip! I forgot to week the center triangle out of one of the "A"s on a project and didn't notice until I had pressed the shirt. I immediately searched your videos for a solution and was not disappointed. It worked great!!

@kellyscharfenberger7494 5 лет назад

You just saved me not only money but time..... Thank you Thank you Thank you!

@heartinsimplicity784 5 лет назад

This completely worked! Somehow a tiny strip got pressed on! I was so upset thinking I'd have to make it over. THANK YOU SO MUCH!!!!!!!

@craigmichelleanderson6300 3 года назад

The vinyl came right off, but you can still see it on the shirt. Any suggestions?

@vennicialawson6022 5 лет назад

If there is glue residue that's left behind, how do you remove that??

@itskimburrlayy 4 года назад

can anybody answer this question?? I also have residue left.

@ijam1729 4 года назад

@@itskimburrlayy wash it off with hot water

@bananageden 4 года назад

She tells you 6 mins in...

@axeldeeker5644 4 года назад

5:56

@mongoliandude 4 года назад

@@axeldeeker5644 Her accent is so strong I have no idea what her advice actually was: "you use some Goo'g-wine to soak it off and then wash it" I can use some WHAT?

@laceykhon6619 4 года назад

This is an amazing tip! I accidentally forgot to weed the center of a letter with Siser HTV on a BIG order I was completing. I was worried I would have to reorder a single shirt and remake the design.... using this method, I was able to use my tweezer and get just the middle of the “a” out without ruining any of the other pieces! Amazing! Thank you!

@cookiecutter5162 6 лет назад

Wow, that's amazing. Thanks! It's so hard to get good clothes nowadays without them having big horrible branding plastered all over them.

@giantpaws 4 года назад

See, this is why I love 💘 your videos! I was able to remove a small piece of stray wedding from a tshirt easy peasy. Thank You!

@tallgirlswagg 4 года назад

Works perfectly. White vinyl on a white shirt and zero burning.

@ladybug35476 Год назад

I'm new to making things and recently misspelled a name on a shirt. I was about to go repurchase everything & try again until I saw your video. Thank you so much!

@harveydapper 5 лет назад

I did this with a hoodie but instead of an iron I used boiling hot water and soaked it then the vinyl came off

@batguy9287 5 лет назад

Did you just leave it in a bowl or did you use the scissors

@aishapopal8475 4 года назад

Can I use the iron on a hoodie

@danbarb9728 4 года назад

i thought HTV is tougher and melt into the fibres but as a beginner i made a test and heat pressed small fonts from 5 different HTV brands to a shirt to see how durable it is. I planed to wash it every day but after the 2nd wash i noticed some curling on the edges of the small fonts, this was chemica hotmark HTV, a very thin material of 55 micron. So i tried to rip it off when it was still wet from the washing machine and i was able to rip it off with a medium force i would say. And i was able to rip all the other HTV from different brands off as well, i am a bit dissapointed and i thought the HTV would melt into the fibres permanently but it isnt the case, it seems to only bond slighly with the glue on the fibre. Off course you need some force to do it and i ripped off some fibres of the shirt as well but it wasnt sticking that hard. Maybe it was because it was wet i dont know, maybe its normal and my expectations were to high. I even pre pressed the shirt and give it a quick 2nd press. I mean it was a Stahls heat press i checked with an IR thermometer. One thing i noticed is that when you cutting settings are not good, the cameo tends to rip more instead of cutting which lead to tiny curling off the HTV Vinyl around edges, i think the hot glue of the HTV will bond not good on those parts, maybe i am wrong here. The cut settings i received were all to much, it was blade 2 force 12. With blade 2 force 3 it was much better, i guess i could even go to blade 1 force 14 or something like that. greetings from Germany.

@dianestigen1675 3 года назад

@@danbarb9728 the HTV does NOT melt into the fibres..it is just glued to the fabric...

@jaelynnkupahu4738 5 лет назад

YOU DONE SAVED MY LIFEEE.

@TheZemun 5 лет назад

"... slowly but surely " , just love it ...

@paag.7308 4 года назад

one of the best informative htv video. Ok has anyone ever try removing THERMOFLEX TURBO Vinyl?? i Want to see an easy way to remove that sucker

@JosePerez-lp3ok 7 лет назад

Will it not burn if my hoodie is 50% cotton 50% polyester cause it has a gang nam style print on it and I actually never wore the sweater and I wanna remove the print to just wear the hoodie blank

@BabyBunch 6 лет назад

Jose Perez polyester burns quickly

@hi-pj1xp 6 лет назад

Same

@queenkay8631 6 лет назад

Same it has my school logo on it ;-;

@michellehensley78 6 лет назад

Baby Bunch yep! Just found that out the hard way. :(

@Belovelyava 6 лет назад

Jose Perez 1080 vinyl remover solvent

@yokonamigaara 5 лет назад

This just saved me so much time and grief!! Seriously it was done in mere minutes, thank you

@VickieJudkins 5 лет назад

Wow I have been so afraid of HTV ! Wow! Not anymore! You need to make more videos!

@betzysdiyandmore276 3 года назад

Just tried this on 73% polyester and worked perfectly!!! THANK YOUU!!

@ScrappleCheesesteaks 6 лет назад

Ok, you are awesome! Thank you for this. I did a transfer a few nights ago and really messed up on the alignment. on a thick $9.00 cotton shirt. After seeing "how to's" using chemicals or some type of solution, I thought there HAS to be a way without me spending money on this. This worked flawlessly and fast! No burning of the shirt what so ever! Thank you again!

@jackihattle5855 6 лет назад

You just saved me. I made a shirt for my sweet girl and I missed a piece a vinyl. Thank you!!!

@ashleymccolgan1547 6 лет назад

OH my gosh! I tried following 3 other tutorials. Never thought to wrap it around the iron. Got that piece I forgot to weed off in like 10 seconds! THANK YOU!

@carie0188 5 лет назад

I just tried this and it works..... Life & money saver 😂 Thanks

@Christalist20 5 лет назад

Thank you very much. This just saved my butt. Working on last minute Christmas shirt.

@debrabreister7942 4 года назад

Thank you so much!!! You just saved me a ton of time & money on my daughter's sorority shirts!!!

@bamforza9098 3 года назад

Just stopped in to say thank you. You just saved me so much time and stress. I had a little vinyl weeding fling onto my project, it came right off with this method .

@anupriyamalik6016 3 года назад

My print came off by this method before the video was even finished...so good..thank you💛💛

@lingo9355 4 года назад

Thanks alot Now I can wear my father's hoodie and my little brother can wear mines You have saved me alot of money 🙏

@paulwilson6968 4 года назад

Thanks for the video. Did a shirt after doing a few practice shirts and thought I had it down pat and sure enough the vinyl stuck to the easy press as I was lifting it up and peeled partially off. Thought GREAT ANOTHER WASTED SHIRT. Then I remembered your video watched it and got the vinyl right off. Thanks again for the videos.

@mariannklein7720 6 лет назад

started watching this in frantic mode cause i messed up! by the time your video was complete i was finished taking off my oops!! Thank you thank you thank you!!!

@angieverity1975 5 лет назад

Thank you so much!! you just saved my project! I had ran out of the chemical vinyl remover which is costly and actually kinda scary how dangerous it could be but I needed on number removed from an expensive jersey and this did the trick! :) Thanks so much. I'm going to be sure to watch all your videos for ideas and tips!!

@raquelocasio8588 2 года назад

This just saved me a whole lotta stress. I thought I ruined a tshirt for an order that had to ship same day. Thank you!

@tamibarron1691 7 лет назад

Thank you, thank you, thank you! I missed some weeding on a shirt for an order and your video saved me so much time, energy and money!!!

@thegraybarnsoapsandcandles4721 5 лет назад

Thank you for this tutorial! I just used this technique to remove some vinyl on a burlap table runner and it worked wonderful!

@wsexydevilful 6 лет назад

This video has just saved me!! thank you so much! it worked perfectly for me, and you werent trying to sell me anyting "SPECIAL".... just honest helpful advice!! I really appreciate you for this video. thank you

@azcreationsbycheri9535 4 года назад

I am so thankful I found this video, you honestly saved my shirt I was doing!!!!! Thank you

@kgilchrist10 6 лет назад

Thank You Thank You Thank You! Your video saved me from having to buy another shirt and also helped me remove excess vinyl ironed on. Great video.

@london4676 6 лет назад

I'm so glad I watched this before I needed it! I watched it just in case I ever needed it. Then one day I was pushing the limit of getting an order out on time and lo and behold I put 3 number 6s onto my shirts as 9s instead😱 but they came right off with this method!!

@nicolethomas1830 5 лет назад

This just saved me a shirt! Thank you! It was 60% cotton 40% polyester so I didn’t need the temperature on the highest setting :-)

@BajaMija 4 года назад

Oh my goodness!!! YOu are a life saver!!! I just finished a shirt and realized I mispelled a word. #rookiemistake Thanks to you I didn't have to junk the whole shirt and start over!

@karenr6825 2 года назад

This was so needed. Thank you. I have thrown away a lot of Tshirts because the vinyl didn’t come out right.

@lauransantos 4 года назад

Thank you so much for this video! I made a mistake on a friends shirt and I just knew I had to trash it 😢 but then I found your video and fixed it!

@itsjenabena3292 4 года назад

THAAANK God for you & this!!! I misspelled a letter on my project & this saved me from having to throw it away & start over!! Whewwwwww

@tiffanyperry888 4 года назад

Omg i replaced two shirts for mistakes on my tee shirts, buying them over and over im going to try this now

@tanyaakers5743 7 лет назад

So glad I found video... had a thin line of vinyl missed until heat pressed on 50/50 cotton & polyester t-shirt, it came right off!! Family reunion t-shirts only one in that size and to late to order another. Thank you, Thank you, Thank you!!

@NewYorksFinest1 3 года назад

You rock. I ordered a jersey with my name on it and the company misspelled my name and told me to keep the shirt and resent me a new one so I was wondering how to get the letters off then I saw your video and the letters peeled right off. Good job :)

@mistyewhite4966 3 года назад

You are absolutely wonderful for sharing this!!! Thank you so much 😊!! What a blessing 🥰🥰🥰

@mistyewhite4966 3 года назад

This helped me save 2 shirts I was working on!

@katrinasfamily4852 5 лет назад

Thank you for tutorial, I have ruined MANY shirts by forgetting to take something out. I'm going to remove the mistakes now! Thank you again

@elizabethkrotov3096 4 года назад

Thank you! You saved my shirt!!!

@devanquinones1144 6 лет назад

I definitely appreciate you for uploading this video!!!!!! You have SAVED the DAY!!!!!

@aprildavidson5671 5 лет назад

Worked like a charm! Wish I would have found this long ago to have in my HTV toolbox of knowledge! Betsy you rock!

@Ikandybybarbie 5 лет назад

Thank you for this video! spent hours making a shirt for Disneyworld! Put it on and didnt like how some of the numbers looked (sport flex should have been used ) was soo disappointed put the shirt away and found this video!!! Now Idont have to start over!

@ellentracyy 5 лет назад

Followed her instructions and it worked perfectly on my hoodie, has some left over glue stains but the print is completely removed

@emilyhunley7728 5 лет назад

Did your hoodie have polyester in it

@ExposeDarkness7 Год назад

thank you! You really helped me out, I like my clothes plain and this opens up a lot of options if I don’t always dig the logo, God bless you, you totally rock!

@barbienut1 5 лет назад

This is great! I have a t-shirt I wanna remover the vinyl on just one part and reuse. So glad I found this video before I spent any money. Thank you!!!

@jamiehuber6082 3 года назад

You just saved my christmas present!! Thank you!

@CraftsbyShavon 3 года назад

Omg think this will b an life saver! I start for Halloween making a mask for every holiday. Was wondering if I was gonna just store them for next but no... now ima rub em off and reuse ♻️ thank u!!

@PMPerformance 5 лет назад

this helped me a ton to fix my first shirt I pressed! great videos by the way. I bought my press due to your video overview on it

@LyndaCarpenter2015 6 лет назад

Thank you, thank you, thank you!! Just kept me from ditching two Christmas presents for Grands..

@lynneluce9139 4 года назад

THANK YOU SO MUCH FOR THIS!! It worked perfectly on a piece where a little weeded piece hung on! Worked perfect!

@finahence5075 5 лет назад

This video was a LIFESAVER tonight!! Thank you!!

@maisiemcgeever9364 5 лет назад

I want to take some letters off my hoodie but don’t know how? However tho how did that T-shirt on the inside not burn if you have it on the highest setting.

@blairb7884 4 года назад

Maisie McGeever it did

@marcusdordevic2991 4 года назад

Blair B7 What do you mean

@shannondotta602 5 лет назад

I just ran across this video!! It totally saved me! I just applied my HTV and when I went to do my2nd press after removing my transfer there was a small piece of vinyl stuck to my teflon sheet that I did not see and it got pressed :/ Thank you so much!! :D

@iShopSuey 6 лет назад

Thank you! Didn't know this was possible ... especially nice if you did forget to weed something! You're so sweet!

@zild71 5 лет назад

Just came across this today really good tutorial you should refer this again!

@justinesmith2192 3 года назад

Thank you !!!! I am a new ar using the vinyl and have messed up a few times already and my project was almost perfect ...but So I am so happy to have found this....

@zoesalamahill 4 года назад

THANK YOU SO MUCH!!! I bought a dress because the fabric was cute, but I really don't want to walk around with a large "PLAYBOY" vinyl on my chest!

@amberrudisill1155 5 лет назад

Thank you for showing this!! So amazed right now!!

@anitahall53 4 года назад

man are you awesome, thanks for this i ruined by burning a back design on a customer's tee and this saved it . on another note the reason why i burnt the design was that my press isn't functioning at all , if i say set the temp to 300 f it does heat up to that degree the counter runs up quickly too 300 and the output light comes off, when i go into the c-f settings and press and hold down 'c' the output light would come on and the press would just get hotter and hotter but the minute i press settings again, the light comes of and it will bring to cool right down way past the 300 smh . i've given up decided to us the press to put everything on and then go over with an iron cuz i don't know what else to do and i can't buy another press ATM

@kristinomalley1652 2 года назад

Thanks so much for posting this. I hadn’t seen it done like this before!

@CuttinCornersVinyl 2 года назад

Glad to help!

@OG_Beckie_Leigh 4 года назад

THANK YOU! THANK YOU! THANK YOU! I have a lovely Bella+Canvas shirt with a full front design that I ordered before I started making, and the seller used a terrible, cheap HTV. I was about to try using my heat press to remove it today, but this will save me so much trial & error time. RU-vid recommendations was reading my mind! 😂😂😂