How to Remove + Install Dual Carbs for Honda Shadow

Подписаться 43 тыс.

Просмотров 65 тыс.

50% 1

Removing or installing a new set of dual carbs? We've got a step-by-step guide for you right here.
Once you pull your carbs off you'll see two rubberized intake boots. Start by taking those off. DO NOT REUSE YOUR OLD CARB BOOTS!
Next, TJ walks you through the full process in this video - WATCH AND LEARN, people!
Get your DUAL CARB intake boots here: shoptjbc.com/products/dual-ca...
Get your SINGLE CARB intake boot here: shoptjbc.com/products/intake-...
Get your DUAL CARB Complete Stock REBUILD KIT here: shoptjbc.com/products/complet...
--
Like what you see here? SUBSCRIBE to our channel, then make sure you’re following us everywhere else!
Get all the latest updates on new product releases via our FACEBOOK page: / tjbrutalcustoms
Then follow us on INSTAGRAM, for all the off-color stuff and exclusive content you LOVE: / tjbrutalcustoms
On the hunt for LEGIT BADASS CUSTOM HONDA SHADOW PARTS?! We’ve got ‘em! Check out our shop: shoptjbc.com/

Авто/Мото

Опубликовано:

2 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 103

@big_air_jer9768 5 лет назад

Great vid TJ, have seen sooo many posts lately of people having issues with removing or replacing there duel carbs. This will help them out a ton.

@vadimkovalev8155 5 лет назад

Awesome video defiantly helped a lot! Thank you!! Now I need to know how to install the fuel/coolant hoses and get the bike running again

@madebyhim1197 3 года назад

Amazing videos, just bought a 2002 Honda Shadow 750 ACE from a guy who said something was wrong with the air mixure settings so i took it home and it idled fine but would die when i gave it gas. I wantched about 6 of your videos and felt confident enough to take out the carbs and clean it. They were gunked up bad, clead everything LP aired all the jets and passages and reassembled and man it has power now. I did notice that it was not regetted for the Vance and Hines exhaust due to the original needles still being used...im going to be purchasing your performance kit and fix what should have been done years ago. Thanks for your videos...

@jefffrayer8238 5 лет назад

Thanks so much. My stock, low mileage '06 Shadow, 1100 needs the carb jets changed when I put V&H drag pipes on. Carbs have never been off and I was planning to put new boots on. Love the bike even though I have 2 Harleys, Lol. Thanks for taking time to make informative videos. Hopefully I'll be getting parts from you. Jeff in Mich.

@AlbertRamosArt 5 лет назад

Amazing tutorial TJ! Thanks so much for sharing!

@cri8tor 5 лет назад

Exactly the tutorial I needed! Yes, please keep recording and posting these basic tutorials. Not everyone is used to working on cruisers. Thank you so much.

@highonfire885 4 года назад

Agreed

@TJBRUTALCUSTOMS 8 месяцев назад

You got it man! Thanks for the comment and support!

@nghtrider62 3 года назад

Thank you, I know this video is 3 yrs old. But this was sent to me by a friend, who recently learned I will be rebuilding my 85 Honda Shadow VT500 Carburetors. And turned me on to your 1-4 Carb rebuild, I bought a 2nd set of Carbs off of eBay and the rebuild kits and the Diaphram and plunger. I just ordered Intake boots for my Bike as a Precaution since I'm, it's 3rd owner and 2nd owner sold it to me as a used bike. DMV says it's a Salvaged bike. So I gotta be prepared. Runs great, using full synthetic without any leaks. Cycle shop said it's only using 1 carb on low rpm's. So I'm just going to rebuild the 2nd set and pickup a vacume Calibration tool. And thinking about picking up a 6L Ultra sonic cleaner. I liked how yours turned out. Thanks for the tips. They will help. "My Handle is Nightrider, I use to ride my mountain bike at night. But RU-vid wouldn't let me register that name". Hence Nghtrider.

@jasonleavitt1289 3 года назад

OMG I fought getting the card back on but after watching your video I ordered new boots and put the carb back on in a snap. Thank you so much.

@johnblegen1150 5 лет назад

Great video love the explanation of a "prybar" can't wait for your parts for a 1100 sabre

@stackumz 5 лет назад

thanks for the clear, direct and detailed video man. I gotta monkey around with mine soon and see what's up 🤘🏼

@davehowie03 5 лет назад

This is the one I’ve been waiting for. Gonna clean and rebuild my carbs this summer.

@manuhonkanen2111 4 года назад

Did you do it?

@John-bz7kn Год назад

Did you do it?

@derekv275 Год назад

Bro! Great video! Made my life so much better

@thomascollins4353 4 месяца назад

I love your videos. My 2003 Honda Shadow carb job needed your help. Thanks Bro!!!

@TJBRUTALCUSTOMS 4 месяца назад

hell yeah dude! very welcome!

@craigevardson6241 5 лет назад

Cheers you are my manual it's what I'm doing with bike in Thailand now thanks for the help ..... been looking at the Honda goldwing next cafe racer style second hand prices are low in the UK for the flat four goldwing do you have anything to do with that bike in your shop

@JimSturdivantWoodButcher 4 года назад

Thanks dude, I've really bed struggling with mine. I'm gonna try it your way.

@leesnavely2006 3 года назад

Super helpful man, thank you

@MrArnie1963 2 года назад

Thanx TJ big van of yours your the man!

@vasilarangelov2604 4 года назад

Hi, I am huge fan of your work. I ride VT600CV. I have a question - with 4 valve carb synchronizer can i sync dual carbs using only 2 units from the device?

@TheBlade302 4 года назад

Do you have a vid showing the velocity stacks on a duel carb? Dying to see how it looks. I have an 03 ace 750.

@tylerpreston1124 5 лет назад

Hey TJ not trying to bug ya but have you made the exhaust system for the 1100 shadow yet and another question the back daft exhaust will it fit for the 1100 shadow

@wildbillavl Год назад

Thanks for this video! Dumb question but are both boots the same or is there a designated one for the clutch side vs brake side?

@nelsondiaz4344 Год назад

Father Mucker you're just awesome. Crisp, clear, concise, education. Thank you for all you do! Rock on!

@TJBRUTALCUSTOMS 3 месяца назад

THANK YOU!!! YOU are awesome as well! Thanks for the rad comment dude! 🍻

@Onlyone10184 4 года назад

What size jets do you recommend with velocity stacks and your back draft exhaust

@meinbherpieg4723 2 года назад

You. Rock. Thanks for the video. Much appreciated.

@dmitriyeveasley2646 3 года назад

Good video. Just bought your carb kit. Why do you send 2 idler screws with the kit?

@Webrunner6951 2 года назад

TJ, Any tips for Carb Install on an 88' VT800C? New boots cannot fit it in with the Boots?

@krustykarver4503 2 года назад

Do you have one for a double to a single on a vt1100?

@Onlyone10184 5 лет назад

What size jets do you recommend with velocity stacks

@MrGoatmilk97 2 года назад

now do you have a oart number for the carbs? I've been trying to get some from a Honda dealer, online, the forums aren't helping just trying to tell me how to temporarily fix them, I just need a new set

@alexandradeneve6701 2 года назад

Do you have a video showing how to prep the bike for carb removal? I am trying to figure this out but I see different prep options like removing the gas from the carbs, draining the coolant system, stuff like that.

@Sil3nt_Cha0s 4 года назад

Love your videos and have learned a fair bit from them. Just out of curiosity though. Why no love for the shadow 500? Looking forward to seeing more videos. 🙂

@TJBRUTALCUSTOMS 8 месяцев назад

unfortunately the 500 is a superannuated model. Not enough demand to really invest my time and money into it. Parts are impossible to find for it too.

@asukalangleysoryu9416 3 года назад

Hey so I bought a new carb for a 1986 honda shadow vt500 but the choke cables are now definitely do you have any tips ?

@broyzilla9134 2 года назад

Is there a video after this one for running the fuel lines correctly?

@user-ug3rj3nz7k 5 лет назад

Do you have boots for the vt1100?

@dre3k78 2 года назад

Awesome vid! Dont forget your boot clamps though!

@highonfire885 4 года назад

Thank u helped so much

@wcarper1 4 года назад

Where did you get the new replacement carb boots?

@dustineskew3689 3 года назад

what kind of grease do you recommend

@juanocybe 2 года назад

is the phantom dual carburated?

@suprmn1978 5 лет назад

Done it a couple times. Not too bad. I still need to shim my needle jets. My top end and high rpm is like a damn slug.

@davidcruz943 2 года назад

How do I determine what carb I have on my 750 ace

@zraker7 Год назад

Just noticed after removing both boots one boot is slightly longer than the other. How can u tell which one goes where ?

@PeterSmith-or3pq 3 года назад

Good stuff

@chrissysucks909 2 года назад

my key will not turn inside my ignition.. Ive had a new key cut and ive used a little bit of graphite powder and jiggled the shit out of the key and still nothing. Should i replace the igniton entirely? If so how do i do that?

@mikesrcgarage 4 года назад

Hey my bro do you have a video for a 2002 Honda Shadow vt 750 ace fuel line routing and vacuum line routing? I have the manual but it's pretty vague. Thanks my brother and great video!

@christopherdavis63 7 месяцев назад

Did u ever find info on fuel lines and hose,I need help with this and can't find a detailed diagram

@MichaelJCline-pu1hz 4 года назад

What year does this work for? 98'-03'?

@gavinmccormack8915 4 года назад

Love that music...Anybody know what it is?

@samanthaalvarez7724 5 лет назад

Is there a single carb video?

@davidlindsay5761 8 месяцев назад

Hey brother I watched your video about removing airbox, after removal do I just put Air filter cones on intakes to carbs, then am I going to need to re jet my carbs?????? Any help I would greatly appreciate it thank you

@TJBRUTALCUSTOMS 8 месяцев назад

DO NOT USE CONES OR PODS! You will need to pick up our stacks and a tuning kit. for further info please check out the how-to's page Stacks - shoptjbc.com/pages/search?query=stacks Performance tuning kit - shoptjbc.com/products/jet-kits-for-honda-vt600-87-08-and-vt750-98-08

@yungdark409 5 лет назад

Good knowledge as usual!

@jessejohnston4474 5 лет назад

Woah. The choke is on the throttle cable plate or whatever?!?! Lol. What year is that bike?

@Basement31 5 лет назад

Follow up question Tj....do you know if a honda rebel rear shocks 10.5" will fit an 07 spirit 750?? I'm not a tall guy. Lol

@Basement31 5 лет назад

TJBRUTALCUSTOMS does it take more than just jacking the bike up to make it fit to the mounting post? Can I use the same oem bolt on my spirit?

@4evergaming-622 5 лет назад

I want to run a single throttle line. I put on clip on bars to. Do I need to run a shorter line or is the stock length ok to use ??

@4evergaming-622 5 лет назад

TJBRUTALCUSTOMS thanks man much appreciated!!

@Basement31 5 лет назад

Hey Tj, Can you convert forward controls to mid controls? - 07 spirit 750 dual carbs.

@Basement31 5 лет назад

TJBRUTALCUSTOMS YES!!! I would love to see that. I'm not a tall guy and I think I like mid controls better. Thanks Tj U R D MAN!!!

@PierreClavie 2 года назад

My throttle will not move! I don’t know what to do. It’s was in garage to long.

@FutureMarineDevilDog 5 лет назад

What about all the hoses? That's the part I don't get

@Zahra2008. 3 года назад

hey man... in my bike there iz two exhaust and one heats up more than the other.. why is this happening.. ?

@agentone8511 3 года назад

Probably clogged up or only one piston is getting spark

@PelukaUSA 3 года назад

Yeah, so easy with a naked frame, Tell me on a 1996 Honda Shadow with the air intake conected to the frame air box thru a rubber boot, how easy is that? Pain in the butt!

@agentone8511 3 года назад

I need to learn where the tubes go. None of the service manuals clearly says where they go

@TheFunky57 3 года назад

Thanks buddy, my Clymer's manual is pretty sparse on info and the black and white picture are shit. Subbed!

@danefan2904 5 лет назад

Yep. Could have known that 2 years ago. Too soon old...too late smart. Next time I'll grease it!

@olinlego8117 9 месяцев назад

Having trouble reinstalliung the boots for the air cleaner box

@TJBRUTALCUSTOMS 8 месяцев назад

literally spit on them.

@BenjamIncredible 4 года назад

The part your missing out on the fun is when you try and get the stock airbox on and the F'ING $#!+ does not have enough rubber to carb ratio and you can only push the airbox down so hard before it crushes. If you run into this as i have. Try and get a heavyset gal to sit on the air box while simutaneously pushing the carb up with a 6ft long pry bar.. When you're done, I recommend jumping into a snowbank to try and cool off.

@rolandaspacevicius1967 4 месяца назад

I've never worked with dual carbs, yes the info was useful. But let me explain what I'm looking for... I've bought a used bike that had dual carbs ''installed'' haphazardly aftermarket. Only one of the lines on the bottom is connected to anything. Should they be interconnected? I know my single carbs, but this just got me confused...

@TJBRUTALCUSTOMS 4 месяца назад

I'm so sorry but I can't really tell what you're talking about via comments man. I'd suggest watching this video series which will familiarize you with what you have - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gYLGWX_y_v8.htmlsi=kPvxCOCniZnrYlvJ And dig into your service manual as well! Hope this helps!

@rolandaspacevicius1967 3 месяца назад

@@TJBRUTALCUSTOMS I will. I'm looking for information how to connect all the tubes correctly. It's kind of a ''know your bike before you can ride it'' thing, and also learning as much as I can that I can do maintenance myself. That's why I've bought it as is. It needs some work to be done before it can run. Other than that, the engine is basically a copy of an old Honda CMX250 (that much I've figured out during my research) so also looking-up info about that as it may come in handy.

@HeavyCha Год назад

I've replaced the boots twice and still I have some type of vacuum leak this doesn't work

@TJBRUTALCUSTOMS 3 месяца назад

maybe its not a boot issue??? slide diaphragms? open vent on the carb that should be plugged? have you done a compression test? leakdown test?? lots of other things can cause a leak

@4evergaming-622 5 лет назад

Hey man.. I’ve emailed you guys twice and no response. I placed an order over two weeks ago and I can’t even get an update from you. What’s going on? I hate to comment about this but I don’t how else I can get in contact with you.

@4evergaming-622 5 лет назад

TJ9124

@4evergaming-622 5 лет назад

Thanks for the email back. Now I understand why it’s taking a while. Much appreciated thank you.

@disciplez0 10 дней назад

Now do it with the velocity stack😂 not so easy lol bu5 ill try again with this technique 😂

@TJBRUTALCUSTOMS 7 дней назад

👍

@disciplez0 7 дней назад

@@TJBRUTALCUSTOMS hey worked out great, picked up the bike for free with most of the parts from your site installed but cab so I'm going through everything can't wait for the first start up.

@jessejohnston4474 4 года назад

Need a video that shows hooking it all up lol. I have a line that I can't find where it goes but it was also a used bike so idk. Diagrams and all still lost smh

@jessejohnston4474 4 года назад

@@TJBRUTALCUSTOMS it was the vent line. I took the carb back apart and found the float stuck. Gas was coming out of it originally so I was confused lol. Rebuilt carb and reinstalled and line is no longer leaking gas. stuck float caused gas to come out vent line I suppose.

@jessejohnston4474 4 года назад

@@TJBRUTALCUSTOMS learned alot for watching all your vids

@HyperionTwo Год назад

Step one: Strip your bike down to the frame and motor only 😂

@bradleymorgan8223 3 года назад

my bike has the intake manifold built into the frame, with boots above and below the carb. i'm this close to just taking a knife to the boots and ripping them out

@saintex190 2 года назад

you have an 86 shadow 750? did you figure it out?

@bradleymorgan8223 2 года назад

@@saintex190 it's a 700, and i haven't once gotten it to run quite right. it's close, but it just seems like it never really gets the right mixture

@saintex190 2 года назад

Keep trying? How did you get the carbs out of the frame?

@bradleymorgan8223 2 года назад

@@saintex190 i ended up cutting the boots out. I have replacements for the lower ones, but getting the carb to seal against the frame ports is tricky. I don't have much time now during school, but i might 3d print a new manifold that just comes out the side rather than connecting to the frame