*** How to Remove Really Deep Scratches from Car!! *** 

WLA WRESTLING, wrestling fan you basically " DDT 'ed " that panel ! nice job removing the majority of these scratches on that panel, thanks for posting

If you have a deep enough scratch that your finger nail catches in it then try this first. Take a wet microfiber towel and wipe the scratch. Did the scratch visually disappear when wet, or can you still see it? The water acts as a clear coat and if the scratch disappears then the scratch is in the top clear coat of the paint where the method shown here will work if done carefully. If the scratch is still visible with the water then the damage has removed the top clear coat and the base color coat and possibly the primer down to the metal substrate in which case no amount of sanding and buffing will remove.

It's hard to believe you only have 145 thousand views on this it is amazing what you did to that car you're the man!

Tolecut works amazing. Recommend holding block flat on surface to level the clear in a even fashion.

I am BLOWN away! Great job and thank you for the tips.

Damn out of all videos, yours was by far the best. Good job! my car got keyed, i need to repaint 3 panels and there asking 1000$.

Great video, great finish really glossy, thank you, you have a new sub

Question: Where did you get the little sandpaper/sand block for the process?

Great video! I tried to repair some scratches on my bumper by wet sanding then using a spray can with factory matched paint, but the paint-can sprayed unevenly and looks "bumpy". Will using a buffing machine with a cutting compound smooth out the paint? Thanks in advance and have a great day! Keep up the good work!

That was a excellent job. What compounds did you use ? Thanks

This scratch was definitely not deep. I myself took 1-2 hours of sanding before getting rid of a big scratch. This scratch was broad but it was definitely not deep to be mostly gone after one pass of sanding. A shot of the scratch @ 1:06 on the fence show the scratch characteristics and that's definitely not a deep one. The process is correct but be prepared to carefully sand for at least half an hour to an hour before you can get rid of a deep scratch.

Where can I buy the wet sanding block?

will show my son your amazing video. some one keyed his car and other cars were he lives

Nice job came out great👍

Nice job.

Great job man looks good

Damm...your good kid! Thanks

A product list added to your videos would be appreciated 😊

That was a good video thanks ..pls can you list the materials and the items u. Need to do d job thanks

This is good better than having a scratch anyway but I find if you do this method the lacquer gets removed ever so slightly and ull notice the paint job looking abit more dull almost like a Matt look funnish you can see it on the before and after on this video. Hardly noticable but another way is if you add paint from a touch up pen to the scratch in the coded paint from manufacturer it already has lacquer in it abit let it dry then do the same method hear ur actually working new paint into the old paint and not just stripping layers

Great job pal 👍🏻

I can’t take out all the scratches with Compound from Meguairs and I use the GPO 14 Bosch and the yellow pad from Bosch, i tried also with a quality wool pad white, I tried all the speeds, but nothing, the color it’s so nice and fresh it’s a big difference but some scratches are still there.

Should list products you use

great job youth man ,,respect,,one love2020

I know you posted this a year ago but I was wondering where you got your small sanding block from?

Great job ! What was that little wet sanding knob/disk?

wet sand and compound with a Rotary wool pad , then the Dual Action ( porter Cable is the best ) . The Da is commonly used for light compounding and fin finishing . By the way I can still see your scratches lol good video by the way !!

What kind of grit sandpaper should i use???

man your girl crazy, but i guess that'll teach you to cheat on her! lol, kidding man, kidding, looks like you went through some trees in your car, lol , good on you man, keep exploring! also, i'm a grown ass man, despite how stupid my profile looks, 36 y/o and i'm learning from you man, keep it up, really appreciate you taking the bit of time and effort to put a little video together for the uninitiated, im a 4x4 guy so never really worried about my paint too much, i was in a forest fire last summer and the paint got really messed from tree branches and the ash, it's actually bad enough that i figured i'd put the effort in to attempt to fix it this time around. lol. thanks again buddy!

U good young man!

Way to go! Thanks and subscribed....

You need to get a clear coat pen. After acquiring the clear coat pen. You need to overfill the scratch. It takes about a 5 days for the clear to cure. Then you place tape on both sides of the scratch. Then you wet sand the over filled scratch until it is now level with the rest of the area that is not scratch. Then you simple buff out the scratch marks.

Which Products Did You Use And What Type Of Machine? .. But Great Video!!👍👍

That’s good work bro. I have a few scratches on my car. About how much do you think it’ll cost at a shop to repair? Or just anyone. I live in Los Angeles.

Great job 👍

Impressive!

Thanks man. 🤘

Nice work.

The music is hideous but great video

Hey what about a garage door scratch down the rear bumper. Just happened the other day after work. Ugh I was so mad. Made 2 scratch downwards. One is a little deep and one is a surface scratch. Sorry for the questions. Hope I’m not annoying u with them. I know some of ur videos are very self explanatory but maybe I’m special that way I’d like a direct response to my situation lol 😂 so any ideas?

Where do you get the product

Hi what is the background music I love it

Great video. Very impressed with the result. How long have you been doing this type of paint correction? Can you let me know where did you buy the sanding block you used and what is it called. Thank you.

Did u claybar it before? Or do u need to?

I’m confused. Shouldn’t you spray some new clear coat over that deep scratch before buffing. I mean he did removed a lot of clear coat that was right near the long deep scratch.

It's a d nib process 2000 sandpaper on a small block when blocking use flat hand not fingers! 400 cut with maybe a 2500 medium cut clear will distort untill scratch is fading clear not paint! Yes spot buff smaller pad a lot better to isolate scratch.try filler polish nice work

My ex keyed my car real deep. Would this help?

What did u use in the start of the video..? What was that u were rubbing on pannel in beginning

Hey any tips on how to shine up my black paint. It’s nothing like this door but it just has super fine light scratches. More like haze marks than anything. It’s a 2012 so it’s fairly new paint. Like what steps can I take to make it gloss wet shine if that makes any sense. Let me know that’s man.

Wow!

Thank you very much. I will be using this on my car soon.

Whichbcompound you used for buffing

Was the scratch just on the clear or on the paint

you are the best

I love the shirt!

My scratches are deeper than his 🥺

will this work if i dont have cutting pads or the machine?

What are the exact products you used please

Hello,unfortuly, i Can not enough understand english, what is the product that you use on your car ??? Thanks !!

What grade of sandpaper do you use?

Nice work! Subscribed.

Nice vid

Where do you buy that sand paper block?

Hey champ what is the name of that lil tube your using

Damn bro, she keyed the shit out of your whip!

wow...and no touvh up paint? i have a deeo scatch that seems a little thinker then yours..I donno if this would work...i would hope though

Nice job

What products?

Good job

Dude.... you shouldn’t just wet sand that small part where the line is. You should start small with a course sand paper and feather it out with a finer sand paper like a 5000 grit this way you smoothen the valley within the clear coat. You should also seal the spot with wax after buffing with polish

What compound did u use

The name of the product is?

How much can this last?

You should also keep the car wet as you are wet sanding.

How to remove squirrels? I don’t think a cutting compound can do that

Whats the material u use to fill the scratches?

Nice

If it's grey but I can catch it with my fingers, can I still buff it out?

will the scratch show up later when the compound wears off?

I couldn't hear you sometimes over the music. Most people don't have buffer machines. I wish you would have shown us by doing it by hand.

Awesome job. 😉😉😉

Title should read "How to remove deep clear coat scratches only" Thie will do nothing if it goes through the paint/base/color layer

30K Views🤑

What products did you buy and from where?

Plenty of scratches left on top of panel.. left and right hand side. Bet with proper light would find more. Look under a handle at 5:04 later on you can see another one on right next to front door 6:07 on lamp reflex. And its only visible because he didnt try to show it ;)

What have you used there?

Deep, but still not through the base and primer, that requires a repaint. This was obviously still in the clear, that's why it sanded and buffed out pretty easily.

Your title is misleading. It is not a very deep scratch. Deep scratches cannot be removed with the process you did. Looks awesome for light scratches though.

nice effort mate are you on Facebook for more query

makes an instructional video but says doesn't know what grit sandpaper he's using

Where are you located?

I sub to your channel broo

Dont need the music, harder to hear

Clear coat ain't a deep scratch

Bro what’s polish name ?

where can i buy the tools

This is just detailing eventually all that buffing will disappear and scratches will come back 😒😔

That took to long. I'm a pro, I would not use that tiny holder on those huge scratches... to much time bro

Wet sand? More like dry sanding

That constant background music makes me tell RU-vid to not recommend your videos to me.