Тёмный

How to Remove Tailgate Glass Micro switch for repair or replace BMW E61 E91 F31 F11 3 5 series Rover 

Mark's reviews and tutorials
Подписаться 37 тыс.
Просмотров 138 тыс.
50% 1

How to Remove Tailgate Glass Micro switch for repair or replacement. BMW E61 E91.
A viewer told me I needed to add a link so people could buy me a Beer or Coffee when they are so helped, especially financially by my videos, so here it is Thanks 😃: www.paypal.me/...
Affiliate Links to Buy:
New Window Switch: amzn.to/39Qa6By
Stanley Basic Tool Kit 210 piece amzn.to/2QAukUf
To buy a basic tool kit look here: amzn.to/2JKQe3s
Torx set (BMW, Euro special tools): amzn.to/2YtjdNh
Torx Sockets: amzn.to/2LLLz3Q
Torx Sockets (F): amzn.to/2HlWblO
HEX / Allen Key Set: amzn.to/2Q5RuPC
Great Multi Tip Screwdriver set: amzn.to/2Yx9u8t
The BMW Store Genuine items: amzn.to/2UGZv4o
BMW Filters and Accessories: amzn.to/2W3J8h4
Thanks for watching this Mark's reviews and Tutorials video. Mark is not a trained mechanic, especially when it comes to torquing bolts. Just a car guy that loves to drive and work on cars. What I do here may not work on your car and I am not intending to give professional advice for you to work on your car. But if you do know a bit about cars then hopefully watching these videos will help you to sort out what is going on with your car. Mark is not liable or responsible for any damage you do or things that happen to your car or yourself.
Cars are complex and dangerous things and not only can you be hurt working on them but you can also do serious and expensive damage to your car.
Cars should be worked on by qualified people, don't over reach.
Talk to a qualified mechanic if you are in any doubt.

Опубликовано:

 

7 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 47   
@johnpetersen8116
@johnpetersen8116 Год назад
Tailgate switch test with an ohm meter reveals a known good reading of 332 ohms of resistance when the switch is activated. Test this first.
@jonredd650
@jonredd650 8 месяцев назад
Question? Theoretically if i leave the old switch on and disconnect the wire and hook up the new switch it should work? Just trying to pinpoint if it is the switch or the wiring?
@mathisnaessens6359
@mathisnaessens6359 21 день назад
Normally that should work. If there is a shortage in the mircoswitch itself than everyting should work perfect with a new switch, if it still fails to work properly than you should start looking towards the wires
@markmckenzie3072
@markmckenzie3072 5 лет назад
Hi Mark you have presented a good number of very helpful videos, thank you. I'm having the same trouble. Can you tell me which fuse I can remove to temporarily stop the rear glass opening intermittently please? Cheers.
@Marksreviewsandtutorials
@Marksreviewsandtutorials 5 лет назад
Mark McKenzie Hi there. No I don’t know which fuse. I had to replace that micro switch and that solved the problem. It was a pain regularly and randomly opening. Especially at night as the interior lights would come on. MRT
@Marksreviewsandtutorials
@Marksreviewsandtutorials 5 лет назад
Mark McKenzie Hi there. No I don’t know which fuse. I had to replace that micro switch and that solved the problem. It was a pain regularly and randomly opening. Especially at night as the interior lights would come on. MRT
@miagreatsister9612
@miagreatsister9612 5 лет назад
Did you find the fuse?
@Kernwaffe88
@Kernwaffe88 4 года назад
What if you just unplug the microswitch?
@nitrueboszczuronefide3052
@nitrueboszczuronefide3052 2 года назад
@@miagreatsister9612 if you take fuse out, wipers will not work just unplug wires from the button
@Bacon-cn1wr
@Bacon-cn1wr 3 года назад
Hi man great tutorial. My wiper arm is fused good and proper to the micro switch housing I've tried everything with no joy any tips or ideas.
@Marksreviewsandtutorials
@Marksreviewsandtutorials 3 года назад
Isn’t it frustrating when things refuse to budge. I would soak it in wd40 and give it time. That will help even if it is corroded MRT
@ruimpinho
@ruimpinho 3 года назад
After removing all the screws and drowning everything in WD40, my switch is still completely glued to the glass. I tried using a hammer, but don't want to apply too much force, or else I might break the glass. Any suggestions? Also, my inner wiper fixture (which is removed alongside the switch) does not rotate no matter how much strength I use to try moving it.
@ppawlot
@ppawlot 3 года назад
I have the same problem, impossible to remove, I am either thinking cutting into the old swith, since I am replacing it with a new one. Or did you eventually have found a way to remove the old micro switch from the window?
@ruimpinho
@ruimpinho 3 года назад
​@@ppawlot I eventually made it. Had to use a saw to cut it in half, then remove it. As said in here: www.bimmerforums.co.uk/threads/e91-rear-wiper-rear-glass-switch.572298/#lg=thread-572298&slide=1 The wiper shaft from underneath was a big pain to remove as well. Be very patient and extra careful to not break the window.
@ppawlot
@ppawlot 3 года назад
Thank you for your reply, funny thing is I did exactly the same, glad we did it 👍
@habtab3498
@habtab3498 Год назад
I've got this exact same issue. I'd really like to avoid cutting so clse to the glass, but as 2 people have had success with this method, it might be the only thing left for me...
@vitasjr2737
@vitasjr2737 Год назад
@@habtab3498 did you cut? I have the same problem…
@jamesgraeme3657
@jamesgraeme3657 6 месяцев назад
Good video but the music at the start is annoying. Mark position of nut on glass with tape so you don't over tighten and break glass on reassembly
@isitgoodtodo2834
@isitgoodtodo2834 3 года назад
my wiper is working but it doesn't work to open the glass hatch i need to do it manually
@Jorfion
@Jorfion 5 лет назад
Music is too loud.
@pimmelpetra3229
@pimmelpetra3229 3 года назад
Hi mate, my switch is tight as f…! All screws removed but it will not come loose. Can you help me out?
@mattonfire1978
@mattonfire1978 2 года назад
Wiggle it hard. Just got mine off an 05 plate, id steer clear of prysing as you'll shatter the glass
@krzysztofp7846
@krzysztofp7846 3 года назад
e39 the same. always problems with cables
@ioncristov6897
@ioncristov6897 4 года назад
Turn the music down please!
@GeorgeZaharia
@GeorgeZaharia 3 года назад
my button doesn't want to come off... i took all bolts and nuts and everything out.. is superglued lmao to the metal piece beneath i think ... well i oiled the other pivot point... i dont think that button is supposed to come off... unless u heat it and ruin the seal ... but on a 17 year old wagon... that thing is cemented... better leave it as is.
@Bacon-cn1wr
@Bacon-cn1wr 3 года назад
I'm having the same problem right now and I've tried everything. did you get it done in the end?
@GeorgeZaharia
@GeorgeZaharia 3 года назад
@@Bacon-cn1wr yea i fixed it, now my wiper works, but i broke the wires for the actual button and i can only open it by remote. the shaft needs to be worked out carefully, the problem on my end was the shaft cause of my e46 2004 old Betsy was cemented there with lots of stuff... so yea in the end i manage to do it, wp40 a flaming torch a clenching wrench and lots of patience and carefulness but i should've tried that before i messed with the button and cut off the wires... but ehm, works atleast. the button on my end, i think the last owner changed it and when he placed the new one, he used some cement adessive or something on the button to stick to the window cause it wouldn't want to come off, the seals and everything was there just the button was stuck to the window definitely and forever.
@Bacon-cn1wr
@Bacon-cn1wr 3 года назад
@@GeorgeZaharia thanks for the reply. I think the problem I have is I live right near the sea and the aluminium ring has corroded and fused to the shaft. I'm going to drill through the aluminium ring with a small drill bit in the morning hopefully that works and I don't brake the window lol.
@gordonaddison435
@gordonaddison435 Год назад
@@Bacon-cn1wr how did that go, mine is the same, drilling seems the best option, but nerve wracking
@Bacon-cn1wr
@Bacon-cn1wr Год назад
@@gordonaddison435 went good was a while back now I don’t have that car anymore. I drilled quite a few 1 ml holes close to the thread then tapped it out. Be careful drilling tho one slip and there’s your back window gone.
@gavincard4568
@gavincard4568 5 лет назад
Ive got same problem on a e91 2008 320d touring (uk version), boot keeps popping open and wont re close, even bought a new boot catch for £90 from bmw to no joy?? Pain in the arse help???
@Marksreviewsandtutorials
@Marksreviewsandtutorials 5 лет назад
Hi Gavin, I have done a few videos on the BMW tailgate. See them all here in this playlist. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YvM9NzIMaRY.html Chances are you may have wires touching in the hinges and causing the glass to open. It is all covered in these videos. Enjoy your research MRT
@geraldholland5872
@geraldholland5872 5 лет назад
My problem is that the switch does not work so I cannot get the hatch open.
@jovanthomas560
@jovanthomas560 5 лет назад
I have the same issue, did you manage to fix?
@swekz
@swekz 5 лет назад
@@jovanthomas560 You have to open it behind the bonnet then. There are some vids about how to do that
@steveromeocars
@steveromeocars 5 лет назад
@@jovanthomas560 Lol I have the same problem. After installing a new MPM ecu because of water in the trunk I´m now searching for the water leaks. Panoramik roof blockers have been deleted. I think there is coming water through the rear window and I can´t manage to open it. Will try to only take off the cap, and cleaning all the contacts behind.
@geraldholland5872
@geraldholland5872 5 лет назад
Not yet. @@jovanthomas560
@robbo82alfie
@robbo82alfie 5 лет назад
@@swekz I have the same problem, where are the videos please?
Далее
@ItsMamix учу делать сигму😎
00:12
Просмотров 809 тыс.
Einbau SenCom Kabelsatz beim BMW E61 rechts und links
16:31
We convert 16 chainsaws into an engine for a car
11:50
Просмотров 161 тыс.