How to remove the mirror cover on a 2013-2019 ford fusion 

Just so you know, the tabs on a 2016 Fusion are hard plastic, not soft plastic. Lifting up the tabs as shown will snap the tab off. I learned this on the first one. And after the top three are done, the mirror has a 4th tab on the bottom, so one has to somehow wiggle the casing off very careful or it too will snap off, just like it did for me. And the is another 1/2 tab on the windshield side as well. Just an FYI.

Thank you. This makes vinyl wrapping the mirrors much easier 👍

Thanks for the video! You most likely saved me from breaking the clips and damaging my mirror cover!

Very clear instructions thanks

Thanks, this helps a lot, I went to go put led puddle lights in mine and I pulled one of the wires out of the connector and I can’t get enough grip on the wire to pull it out to crimp on a new connector

Thanks for the thorough demonstration

Great! Thank you very much! I just replaced LED lighting with new one. Broke lower cover parts, but not a big stuff.

Thank you for saving me $25 in a garage

Nick, you are just amazing 👍

Thank you for your video! It really helped!

Thank you , very helpful

Thanks for the info and help!

where did you get the glass that has the BLIS and the convex mirror? I don't know why manufacturers don't do that more often, it makes so much sense.

great video! Very helpful

Great vid. Thank you

And how do you remove the bottom part going to the door ?

Thank u... Apparently my car is an accident magnet.. 2 doors... and Now a mirror all within 4 years lol

I have a 2020 ford fusion energi hybrid..the plastic cover and frame has been badly cracked ...bought replacements...got mirror off ..easily...the plastic just fell apart...got 3 screws out but 1 screw is in opposite direction...just a tiny piece of plastic still attached. How can I get it out? then...I can put the 2 new cover and frame in..reattach the wires to the mirror....

Should I do this to replace the turn signal light on a 2015 mirror? (It was hit by a door)

I need to find out how to replace the black frame part of the driver side mirror. I've managed to get the mirror mostly disassembled but can't figure out how to reach one of the screws. Do you have a video showing a total disassemble of the driver mirror?

Well done thx buddy 👍

***** WARNING ***** Do not follow this video. Along with the three tabs on top, there is a fourth one about 2" in underneath that must be pressed upwards to release the bottom of the cover. The reason Nick's comes off so easily is he's already broken his. Once broken, the cover becomes dangerously easy to remove and can simply be pulled off - Expect it to fall off and as such needs replacing. I found this out the hard way! Don't be like myself and Nick.

Thank you!

My cover doesn’t come all the way off, it seems like it’s being held on at the lower (inside) corner ( on the door side). Is there another clip to push or something other than the 3 along he top? The light along the side of the mirror assembly got broken in a car wash and I’m tryin to replace it. Seems like I may have to take the lower cover off too? Any ideas? Thanks!

Sweet, time to black my mirrors

thank you !!

Does anyone know if the 2017 is already wired for BLIS and heated mirrors? Mine didn't come with it, but I'd like to add it.

Do you know if the procedure is the same for the 2010 Fusion?

Hi! Could you please to tell me how I can disassembly mirror frame from mirror arm?

Never heard it called flat bladed screwdriver lol where are you from?

Is this process the same on a 2018 Edge?

👍🏻thank you

can anybody tell me how to replace the plastic mirror frame on my mk 5 mondeo

Nick my electrochromiyc mirror dosent work, how it be can repair

👍

Nice but way to much talking! learn to hold the camera a little better. Thanks.

great video...thanks..you help me alot