How to remove turn signal lever / wiper switch VW Golf Mk4, Bora, Jetta, Passat, Polo, Octavia

Подписаться 120 тыс.

Просмотров 206 тыс.

50% 1

VW Golf Mk4, Bora, Jetta, Passat B5, B5.5, Polo, Skoda Octavia 1, Fabia, Seat Leon 1M, Ibiza turn signal lever / wiper switch removal / replacement in 10 simple steps!
HERE you can find Wiper Switch for VW Golf Mk4, Jetta, Skoda, Audi: bit.ly/3NOBNco
Find More Cool Products for VW Golf 4, Mk4, Bora, Jetta HERE:
- 12-Piece Magnetic Torx Screwdrivers Set, Security Tamper Proof: amzn.to/36xs4T8
- Actuator Door Lock Module from HERE: amzn.to/3GnmOUg
- Window Panel Switch for VW Golf Mk4 (2-door model): amzn.to/3buq1kM
- 5 Speed Manual Gear Shifter Knob for VW MK4 GOLF/Jetta/Bora: amzn.to/2XPq2f1
- Cool White Interior LED Kit + Installation for Volkswagen Golf Mk4: amzn.to/2XOeZmg
- Sequential LED Side Indicator for VW Golf MK4/Jetta/Bora: amzn.to/3wU1aUC
- 5 Speed Manual Gear Shifter Knob for VW MK4 GOLF/Jetta / Bora: amzn.to/3MWfL7k
- Cool White Interior LED Kit + Installation for VW Golf Mk4: amzn.to/2XOeZmg
If you enjoyed this video tutorial, make sure to give it a thumbs up and share it with your friends. Also, don't forget to LIKE and SUBSCRIBE!
More VIDEO TUTORIALS on www.servicetutorials.com
Follow us on INSTAGRAM: service_tut...
SUBSCRIBE our RU-vid channel: / @servicetutorials
This video is only for informative purposes! We do not take any responsibility and we are not liable for any damage as a result of the information contained in this video. Use this information at your own risk. Thank you!
If you have any suggestions about new tutorials, let us know in the comments section!
DRIVE by Nicolai Heidlas Music / nicolai-heidlas
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library • Video

Авто/Мото

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 58

@michaelbarr6187 3 года назад

I found this really useful, except it doesn't explain that you need to centre the clock spring, with the wheels central before replacing it. If you don't, the clockspring internal cable will break when the driver locks the wheels to one side or the other. Found that out the hard way :)

@victorjan486 5 лет назад

Mulțumesc pentru videotutorial! Mult succes si spor la treabă!

@Servicetutorials 5 лет назад

Victor Jan Multumim si noi ca ne urmaresti!

@fikibiff 3 года назад

Thank you for the video. My daughter's Bug has been buzzing very loudly. We first replaced the hazard relay switch and it didn't do much to help. We then sprayed an electronic lubricant in at the base of the stalk. That helped a bit, for a while but the buzzing eventually came back. Then, last week she had a bit of white smoke come out from behind the speedometer. Knowing that this signal had been a problem, presumably from a short, we are hoping replacing it will solve the problem. I cannot see any charring on any wires anywhere, but fingers crossed this will be it. I've got the part on order and will have to put it all back together next week.

@Servicetutorials 3 года назад

Thank you for watching and good luck!

@acmurda84 5 лет назад

Thank you so much , I plan on doing this job tomorrow.

@Servicetutorials 4 года назад

Thank you for watching!

@Moncho68 3 года назад

Thanks a lot from Barcelona SPAIN

@Servicetutorials 3 года назад

Thank you for watching!

@shanetalke468 3 года назад

Been a great help thanks.

@Servicetutorials 3 года назад

Thank you for watching!

@lkjkjhkjh5363 3 года назад

Hello man, on my vw polo everything is working but long lights. THis looks very complicate to change is just because of long lights. Is it possible that something else is wrong other then lever?

@ericcohen5967 Год назад

Thanks for the video. My dealer mechanic has diagnosed the problem with my 2003 Jetta to the wiper switch on the column. $700 to replace so I’ll try to do this myself. Your video is great but doesn’t show the final steps how to change the column lever for the wiper. Is it fairly easy to exchange once this assembly is in your hands? Wiper issue is that they turn on but won’t turn off or adjust.

@waelfagiri7877 6 лет назад

So nice, well done 😉

@Servicetutorials 4 года назад

Thank you for watching!

@oscarromero9858 Год назад

Hola tengo un vento variat tdi y me quede sin bosina y sin controles en el volante revise los fusibles estan todos vien

@andresosa8419 6 лет назад

Gracias por el video

@Servicetutorials 4 года назад

Gracias!

@danielgriffith2636 4 года назад

Thanks for the videos! So I've got a problem with my wipers on a 2000 jetta I bought for my son. They start and don't have the power to complete a rotation. I have changed the wiper motor and the 377 relay but it still hasn't fixed it. Is the issue the actual W/W lever on the side of the column? Do you have a video where you change that? Or is there something else I can check into without just throwing more parts at this car?

@Servicetutorials 3 года назад

Hello! Maybe you have a problem with the assembly.

@barozanul2 6 лет назад

Mulțumesc

@Servicetutorials 4 года назад

Multumim si noi ca ne urmaresti!

@DRAINTVofficial 5 лет назад

My steering column adjustment is stuck. Any tips how I can fix that?

@Servicetutorials 4 года назад

It's stuck because of the ignition lock.

@lawson9855 3 года назад

My indicator stalk is stuck on a right signal

@cerrajeriamultllaves 4 года назад

I have one that does not turn the key as is done in that case so that the key turns and can be repaired?

@Servicetutorials 4 года назад

Yes, it can be repaired or replaced.

@bieganowsky 3 года назад

Is it possible to change only wiper switch ? On sale are available separated both signal and wiper...The thing is, that wipers switch is clicking and can't stop wiping... I see for amateur its too hard to replace it anyway...

@Servicetutorials 3 года назад

Hello! Yes, you can replace just the wiper switch.

@keaganbarnes4629 5 лет назад

Great. Now how do I take those apart to add a new cruise stalk.

@Servicetutorials 5 лет назад

Keagan Barnes ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Oabxizwhzx4.html

@cenariusbg 5 лет назад

@@Servicetutorials WTF This is a link to the very same video :D

@yungjavier 4 года назад

@@cenariusbg did you figure it out

@cenariusbg 4 года назад

@@yungjavier Yeah I changed mine long time ago.... How I do not remember - should not be something very hard. If I did it, you should be able to do it really easy!

@yungjavier 4 года назад

@@cenariusbg haha thanks for responding 👍

@AlexanderAnayaZambrano 3 года назад

Hi . cordial greetings, well I have done all the steps you have done, but the airbag warning light on the dashboard does not go off. There is an important step which is the wheel that rotates with a yellow dot that must be left in the center, I have left it that way but nothing, the witness remains on, I don't know what to do I need your help please, what do I do? well remove the rudder to change the intermittent crossover lever and connect the three connectors in fact I have tested both levers and they work correctly, I need your help please, thank you very much

@Servicetutorials 3 года назад

Hi, Alexander! Did you check the connector from the bottom of the seat? I suggest that you make a diagnose to see the exact problem for your car.

@AlexanderAnayaZambrano 3 года назад

@@Servicetutorials Hello, thank you for answering, I changed the intermittent turning lever to the car, I did all the steps that you do in the video, to be able to change the lever, and I repeated the assembly steps, but the airbag warning light it does not turn off, is it normal for this to happen? Will I have to erase the error with a scanner? The same thing happened to you when you disassembled everything and when you reassembled everything again?

@Servicetutorials 3 года назад

@@AlexanderAnayaZambrano Usually, when you remove something like that, the airbag warning light appears, but you can erase that using a scanner. But first, you can try to drive the car for at least 10-15 km and see if it's turning off.

@dieselbourbon3728 Год назад

My lights only work on high beams. I wonder if it's the switch.

@BlackJackPOL Год назад

Did You found the issue? I am guessing in my 2004 Bora there is the same problem. Main light switch is fine.

@BlackJackPOL Год назад

Is it possibly to take off only signal lever/light switch?

@Servicetutorials Год назад

Yes, you can but first you have to remove both of them and then separate them.

@BlackJackPOL Год назад

@@Servicetutorials Thanks I have replaced the signal lever/light switch put everything on, but once connecting the battery (-) and turning on the key the horns turns on, do you know what could be the issue ?

@paintwetonwet 2 года назад

At 6:10 ,- what is a 4m imbus?

@Servicetutorials 2 года назад

It's a 4 mm hex key or 4 mm allen wrench

@DCLopezmusic 3 года назад

well at least the music made it seem easy to do

@edmundasmickevicius8415 Год назад

My wipers won't swich off.what can be problem?

@Servicetutorials Год назад

Maybe you have a problem with 377 relay, watch this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TVT8079jERk.html

@markraines8138 2 года назад

Intermittent then continuous fault. Pulling fuse worked until rainy season. Watched this but didn't have M12 spline remover. Took clip off indicator and filled housing with wd40. Stopped working. Bugger. But a few hours later all dried out and back to normal... Touch wood