my sd card is white protected too when i go to properties it's says this sd card is white protected and read only but when i go to cmd/bootdisk or whatever that is it's says read only (NO)
The point where you entered " attributes disk clean read-only" did not work on mine. But rather "attributes disk clear readonly" . If anyone has a problem when they entered the former command, they can try the latter. Thanks
*SOLVED* This may not apply to your specific situation. I was using a SD card adapter, connected to an SD port USB adapter, because the info was stored on a microSD. The culprit was the SD card adapter. I noticed that the SD port USB adapter also had a slot for microSD cards. So I took the microSD card out of the SD card adapter and just slid it directly into the microSD slot of the USB adapter and it worked! The SD card adapter must have put up some sort of barrier or prevented efficient re-formatting. Note that the SD card adapter was NOT in the physical 'locked' mode AND that I had done what all these other websites and videos had told me to do (CMD prompt, regedit, etc).
Thanks Mate now I realize that the sd card has no issue actually. The cause why my sd card is write protected because the small selector set to write protected. After I adjust, the write protected info has gone. Thanks mate.
I think I'm in the exact same issue. I've tried everything to remove write protection but it's not working. Could you elaborate more on your experience?
When I follow all steps Still my SD card not in list . I tried too much still not sd card option came. I think this work only for pendrive not for sd card Please help
Didn't work, even when I DIDN'T mis-spell "attributes". Also, it's suspicious that the disk you "fixed" displayed as not write-protected to begin with.
Additional note: I DID manage to unlock the Micro SD card I had, by simply putting it in an adapter that had a switch on it (like a full-sized SD card does). With that, the micro card promptly started to behave and accept formatting.
Those adapters with the switch don’t really help all the switch does is engage the switch either on the computer or disable writing. There is a switch inside the pc that the switch hits disabling write protection if you open the sub with a write lock witch you will see it actually doesn’t have anything to do with the inside of the chip itself. It’s basically a bypass switch
I felt like such an idiot I was worried that my SD card on my homebrewed 3DS wasn’t working and that all the games I downloaded were gone until I saw your comment thank you 😅😂
If you're using a sd card with the adapter (which we use in camera) then see if you have switched to lock on the physical adapter. If yes then unlock it and you're good to go
doesn't work for me. After typing "attributes disk CLEAR readonly" ... It's says "sd card successfully formatted" but the sd card is still full of data lol
On the sd card there is a switch if it’s flipped down it’s write protected if it’s flipped up then it’s not Flip it up and It shouldn’t be right protected anymore
Useless, others here on RU-vid have posted this "method" without the obvious spelling error and in the case of my SD card, it still doesn't work. Refuses to format and says Write protected.
not worked showing attributes disk clean readonly The arguments specified for this command are not valid. For more information on the command type: HELP ATTRIBUTES DISK
unclear tutorial.... misspelled the command "attributes" to attribites, then system provided a list of proper commands, then the next step performed in the video was to type "exit" which ends the diskpart process. HTF did the SD card got fixed here? very unclear!
The SD in the first place was in the read only No. It was not protected at all. Therefore, by showing the steps you have gone through definitely it can be formated. The video is useless.
Never mind I found the issue 😅😅😂 my adaptor's thing was on lock so I had to unlock it so 😅😅 but thanks for the tip so next time if it happens I'll know what it might be😂
Not working with my SD card.. and for your info in ur command box ur USB is showing that "current read only state : No" but in my command box shows : "yes". Can u help?.
what if it show like this then ? DISKPART> attributes disk Current Read-only State : Yes Read-only : No Boot Disk : No Pagefile Disk : No Hibernation File Disk : No Crashdump Disk : No Clustered Disk : No
@@donotsubscribe5226 Maybe that's why it doesn't work so well for me. But then again, I can't add my card reader into the USB drive, because when I do it, the card gets obstructed.
I ordered a few of these machines and the SD cards on them don't work. I checked them all with a functioning card and the arcades boot up. Is there a way I can clone my functioning SD card onto the other cards that don't boot up?
you just write "attribites" that's means your sd card is ok from begining, correctly "attributes" because if you write wrong word it doesnt work, be smart please even your wanna help people
All if this didnt work on mine. This is the sixth of the videos I watched to see how I can remove write protected foles in my USB flash drive but still nothing works
I've tried this a few times with my SD card but it doesn't work cause it keeps saying Remove write protection and I did this a few times😞😭 HELP PLZZ🙏🙏😞
you just did it wrong by typing the word "Attributes" in wrong way as " Attribites" and you continued without having the messege succesful at the end of command and pretend at the last that you have done it !!!