Тёмный
No video :(

How to remove your bumper + tow hitch and trim the rear quarter on a 1997-2011 Ford Ranger 

RAYREGNO Garage
Подписаться 8 тыс.
Просмотров 13 тыс.
50% 1

Cus it just looks cooler! I took off the bumper and trimmed the rear quarter panel on my Ranger!
WARNING! Highly recommend you remove the bumper with a friend. I won't be responsible if you drop your bumper on your face! 😬😬😬 I am also a weightlifting coach and lift heavy/awkward things for a living.
______________________________
PROJECT PARTS AND TOOLS
Milwaukee M12 FUEL Stubby 3/8 in Impact
amzn.to/3bqFFOR
3/8" Drive Impact Deep Sockets
amzn.to/2UZuJ3k
Long Ratchet
amzn.to/39fzT3k
Crescent 9 Pc. X10 12 Point Long Pattern Combination Metric Wrench Set
amzn.to/390JTvs
Zip Ties
amzn.to/2Xk0c1n
I used Harbor Freight tools for this project to try them out.. but I also own and DEFINITELY PREFER these:
Milwaukee Cordless Angle Grinder (uses M18 Battery)
amzn.to/351hmoD
Cut of Wheels
amzn.to/2LcT8Rc
40 Grit Zirconia Flap Disc
amzn.to/2X6qwf9
Milwaukee Cordless Reciprocating Saw (uses M18 Battery)
amzn.to/3onOqi0
Reciprocating Saw Metal Blades
amzn.to/3ootAzr
Milwaukee Cordless Rotary Tool (uses M12 Battery)
amzn.to/3rPb597
Milwaukee M12 Battery for Impact and Rotary Tools
amzn.to/3hEaHFM
Milwaukee M18 Battery for Grinder and Saw
amzn.to/3oot4Bv
Milwaukee M12 and M18 Charger
amzn.to/3ohAWEQ
______________________________
CONNECT WITH ME
Instagram: @rayregno @rayregnogarage
For Business Inquiries ONLY: rayregno@gmail.com
______________________________
FTC LEGAL DISCLAIMER
Some links found in the description box of my videos may be affiliate links. This means that when you purchase products or services using these links, I will make a commission on these sales. This is free for you and is one way to support the channel so that I can keep buying more parts and tools and make more videos! Thanks in advance for your support!
______________________________
LIABILITY DISCLAIMER
Please use the information in this video at your own risk. Neither Ray Regno nor Stronghold Garage will be held responsible for any damages, injury, or loss that could arise from using any information in this video.
______________________________
#fordranger #fendertrim #offroadranger

Опубликовано:

 

22 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 72   
@kieranpalmeira9748
@kieranpalmeira9748 3 года назад
Finally someone with an active ranger build!
@rayregnogarage
@rayregnogarage 3 года назад
There are lots of them that I know of. Just no one who videos them. lol
@James-eh6jh
@James-eh6jh 3 года назад
Gotta love it when youtube dosent send notifications and you randomly look to see if stronghold uploaded and he did lol
@rayregnogarage
@rayregnogarage 3 года назад
Ha! I actually wondered about that. You’re always the first person to watch and comment.
@JJCantGAF
@JJCantGAF Год назад
Dear ray, I plan on doing these exact same features on my 2001 Toyota tundra tomorrow. This was the only video I could find too deliver quick, precise and valuable information. From the diffrent grinding wheels you mentioned, too even the license plate light trick thank you. And keep pushing out useful info like this too us new off-road enthusiasts!
@rayregnogarage
@rayregnogarage Год назад
Glad you found it helpful!!!
@stevensmodrnlife
@stevensmodrnlife 3 года назад
Dude a pulled bedside vid would be awesome man 🤙🏼🤙🏼🤙🏼 Definitely anxious for more content on this truck ‼️
@rayregnogarage
@rayregnogarage 3 года назад
I kinda like it the way it is.. but I can do the pull for the video and then undo it. lol. Stay tuned!
@goldenhexagon6301
@goldenhexagon6301 Год назад
This man's a Savage and I love it
@mada310
@mada310 3 года назад
Mark your lines with masking tape. Easy to follow and helps to keep from damaging the paint
@rayregnogarage
@rayregnogarage 3 года назад
Lol. I did that on my Xterra. but i don’t care what this truck looks like. Sharpie was faster.
@rayregnogarage
@rayregnogarage 3 года назад
Besides. you can always sharpie the line a few mm before where you actually want to cut. you’ll smooth it out with the flap wheel anyway.
@ytsteve69
@ytsteve69 2 года назад
We want a pulled bedsides video💪💯
@dumplin666
@dumplin666 3 года назад
I work at a car lot and every time we get trucks that have a hitch with no key I just use a breaker car to snap the locking mechanism right off lol, surprisingly easy way to get em off. Love the finished look btw keep the content comin bro
@rayregnogarage
@rayregnogarage 3 года назад
Didn’t think of that! Thanks for the tip! I’ll try it on another one... I want to build a couple near model Rangers, too. Been working on these trucks since the 90s and we never videoed anything. it’s crazy how much people want this content. lol
@reynaldopadilla7420
@reynaldopadilla7420 3 года назад
Fine Stronghold...I want you to make a video showing how to pull the bedsides. Also, is your rear on blocks or anything?
@rayregnogarage
@rayregnogarage 3 года назад
That's ONE request so far. lol. It has the factory lift block back there. i think it's a 2". I'm planning to get a full Deaver Race Pack and some extended shackles... but first.... Engine swapping my integra. lol
@uzileopard6199
@uzileopard6199 3 года назад
This vid helped me when I had to do this to my 2000. The bumper was crunched and so were the rear corner quarters. Looked so much cleaner after. Then eventually I got pulled bedsides.
@rayregnogarage
@rayregnogarage 3 года назад
Nice!
@DYLANTHESK8ER
@DYLANTHESK8ER 2 года назад
Truck looks super good man!
@rayregnogarage
@rayregnogarage 2 года назад
Thanks!
@reynaldopadilla7420
@reynaldopadilla7420 3 года назад
Literally been waiting for MONTHS
@jeremytn1
@jeremytn1 3 года назад
Can’t wait to see how you build the front bumper just got a ranger myself to make a fun little pre runner out of
@rayregnogarage
@rayregnogarage 3 года назад
Awesome!!! it's been 17 years since I've built anything. We'll see how it goes. hahaha
@dasmach1873
@dasmach1873 3 года назад
How do I have the exact same truck as you..even the same dent in the bed hahaha
@rayregnogarage
@rayregnogarage 3 года назад
hahah. it’s a pretty common color and problem.
@movementonwheels
@movementonwheels 3 года назад
Nice dude! I want to cut my front fenders on my Dakota but I’m scared :/
@rayregnogarage
@rayregnogarage 3 года назад
Just cut less than you actually want to cut and do it in stages. if you mess up at least you have a few more tries. Good luck!
@j.s3591
@j.s3591 3 года назад
Yeah It would be great if you make a video on removing the bedside! Great video by the way, keep up the great work!
@rayregnogarage
@rayregnogarage 3 года назад
remove the bedside?
@JeffreyNevrotski
@JeffreyNevrotski 10 месяцев назад
Future reference screw the saw zaw get yourself an angle grinder with a cutting wheel. I used a saw all the time then finally got a grinder only because i had to grind down some concrete then said wait a tic... Used it to cut off a couple things on my ranger abd it became my go to tool....oh u got a grinder lol
@rayregnogarage
@rayregnogarage 10 месяцев назад
I prefer the grinder for most things. But sometimes the sawzall is nice for some sections.
@mogleymic3834
@mogleymic3834 3 года назад
I have that exact same dent in the back on my ranger
@rayregnogarage
@rayregnogarage 3 года назад
it’s very common. haha.
@Robertschannel-1
@Robertschannel-1 3 года назад
Looks good buddy! I like the ranger content. I own a 95 Ranger XL 4.0 4x4 myself
@rayregnogarage
@rayregnogarage 3 года назад
Nice! What do you have done to it?
@Robertschannel-1
@Robertschannel-1 3 года назад
@@rayregnogarage a ton. It was a Single Cab Long bed truck from the factory and one of the previous owners chopped it and mated it with a 2000 4dr cab. Half 95 half 2000. Then shorted the bed to about a 4.5ft maybe. Moved the fuel system etc. I'm currently trying to fix everything such as water leaks, and stuff. We have warn manual hubs, rebuilt trans. I have re done the entire wiring harness because it was a mess. I have LT265/75R15 Atturo Trail Blade MTs on stock 01 Explorer wheels.
@rayregnogarage
@rayregnogarage 3 года назад
that’s a cool idea. I loved my 99 with the 4 door. Much more convenient than the regular super cab
@scissrface2182
@scissrface2182 Год назад
Remember young techs, always use corrosion protection if you want your work to last.
@thhomy2868
@thhomy2868 3 года назад
Getting some 31’s on my 97 ranger stock suspension 🤟🏻
@maxmlggaming4911
@maxmlggaming4911 3 года назад
Same bro let me know how it looks
@rayregnogarage
@rayregnogarage 3 года назад
It will rub unless you get wheel spacers or wheels with the right back spacing. Mine rubbed on the lower valance on the front bumper, so I removed it
@maxmlggaming4911
@maxmlggaming4911 3 года назад
@@rayregnogarage i was planning on removing the front bumper, but did it rub on the back at all?
@Mike-cn1ei
@Mike-cn1ei 3 года назад
I’ve got 32’s on my 93 with no rubbing. Stock rear and skyjacker leveling coils.
@maxmlggaming4911
@maxmlggaming4911 3 года назад
@@Mike-cn1ei I’m thinking about running 31s on my 97, all I should need is leveling coils correct?
@jessejames0000
@jessejames0000 3 года назад
My 2001 ford ranger has that same dent I thought it's weird cuz its behind the bumper...
@rayregnogarage
@rayregnogarage 3 года назад
ya, the bumper can flex though especially on the corner. It’s a common thing. there’s no side support for the bumper so it bends easily.
@lrchava07
@lrchava07 3 года назад
Love your videos.
@rayregnogarage
@rayregnogarage 3 года назад
Thanks!!!
@hoboslapper1577
@hoboslapper1577 3 года назад
Great Video!!
@rayregnogarage
@rayregnogarage 3 года назад
thanks!
@cl0_dy714
@cl0_dy714 2 месяца назад
Is there anything you used to secure ur rear quarter panels from flopping in the wind lol
@rayregnogarage
@rayregnogarage 2 месяца назад
Ya. You can use some electrical conduit. flatten and bend the ends to the right angle. I did that 20 years ago on another ranger that I flared the bedsides on. will get to it on this truck eventually
@burtgummerVerified
@burtgummerVerified 3 года назад
More ranger please😉👍
@rayregnogarage
@rayregnogarage 3 года назад
Just got a new shop...with heat...hahaha. will be more motivated to do projects now. Did not like working in the cold. Stay tuned!
@burtgummerVerified
@burtgummerVerified 3 года назад
@@rayregnogarage awesome. My build is going on at the explorer forum. www.explorerforum.com/forums/threads/410customs-builds-a-2007-ranger-v8-custom-truck-build-project-ranger-premier.481492/ Looking forward to seeing how you do the TTB
@rayregnogarage
@rayregnogarage 3 года назад
410Fortune...did you ever have an old bronco 2 and post on the old offroadrangers forum? I’m Regeeno
@burtgummerVerified
@burtgummerVerified 3 года назад
@@rayregnogarage yes, 410fortune has a BII and is my builder. I'm the lucky recipient. He is building my 07 ranger on the forum. I'm eddie money.
@rayregnogarage
@rayregnogarage 3 года назад
Small world. That was almost 20 years ago when we were on those forums together.
Далее
Tips for Replacing Front Shocks on a Ford Ranger
13:55
УГАДАЙ ЕДУ ПО ЭМОДЗИ! #shorts
00:57
Просмотров 78 тыс.
Rear Bumper REMOVAL Ford Ranger (2007-2011)
3:35
Просмотров 18 тыс.
97 Ford Ranger - Trailer Hitch Installation
14:16
Просмотров 9 тыс.