How to repair and re-paint a damaged fibreglass flat roof 

Great Job, are you based in London? Could you quote me to fix my fibreglass roof please?

Great video, difficult to find quality videos on fibreglass roofs. I now feel confident in giving it a go. Thanks a lot.

If you did a job like that up north with car repair kits and diy gear, you would starve. I got the impression this is your first time with grp. Try reading the book again specially the technical bits about "CLEANING" MIXING" and "LAYING UP" and how to do it correctly. I'm sure in time with a bit practice you could get it right. I have been doing this for a very long time with flat and pent roofs, also repairing sea going fishing boats. I do have an idea how it's done.

Bro you need to post more often you’ll definitely gain followers your work is amazing good to see a brotha doing it shout out for Australia

If that rood does not peel within in a year or two id be stunned. Never seen GRP roofers work in this way. Not enough tacks in trim, not enough resin used, didnt notice a paddle roller, no additional coat or two of resin before top coat applied i could go on

You are a very hard work

Hi guys thanks for your comments. Please subscribe for more videos which are uploaded weekly. Thanks again

very well demonstrated

Hope you are well insured , as a long drop off that roof if you forget where you are working , which is easy done and slip off that roof .

I'm just wondering why doing fiberglass just the edges supposed to be the whole thing whole roof

Really nice job. This will help our repair. 🙏🏾

Looks good ! I reckon a floor sander would’ve been easier?

what's the difference between the resin and the top coat? If you have pinholes would the top coat fix that .. Some good videos. Keep them coming.

Really a fantastic job!

Coating was very thin?

Got to say that patch repair had no where near enough resin underneath or ontop?? The rest looked ok tho 👍

Could a commercial jet washer be used instead of the scrubbing and wiping with acetone?

That's a excellent job, I have a flat roof that needs repairing in Manchester like that , looking for someone who can repair it like this, as had lots of cowboy roofers who don't understand fibreglass, can you recommend anyone?

I gotta repair a fiberglass roof that has black volcanic sand on it, any tips buddy. Great content 👍👍

Again AMAZING 👍👍👍

Great video how many coats would you put on a boat Hull and do you do boat hulls thanks again

I have peeling in a small area, could I not do a patch repair? Also, would isopropyl alcohol be a suitable alternative to acetone?

Hi nice repair I tried to repair my fibreglass roof last year but now the gray top coating is pelting off I sanded everything down just like you do Can you give every advice please Blus up 👍

How did it get damaged.?

This is a job welll done. I also have an issue with my fibre glass roof, of course it’s leaking. Lol. Would you be able to give us a quote. Many thx. 😀

PPE where the mask at bro. You’ll regret that in years to come. Get a mask. Worth the money

By looks of roof it was a ply base substructure which fiberglass is not happy to adhere to unless sanded before fiberglassing and also if damp it will also not adhere to , OSB 3 is best for the roof decking. Also you did not put fiberglass matting over places where you scrapped off the smaller areas where it had delaminated which you should have before using the gel coat on top.

Omg that is nightmare finish, and why not nail trim ? Was leak coz not enough nails and no glue under , and you put mesh and hold by hand ? That will do ? After half year will leak again, and finish top coat is really bad

Good Joob!)

Hi 👋 could you let me know where based please?

I like fiber glass roofing , it will last forever and strong perfect and nice job .

Looking at what your chipping off......... apart from the edges of about 6 inches up to the roof edge. That looks far too thin, there can’t be any fibreglass mat on that roof, it looks like the centre of that roof only has topcoat straight onto the plywood. (You weren’t chipping up fibreglass mat-were you) ? Or is it possibly 1 layer of 1 oz mat. Very odd. What the hell are you using to laminate the fibreglass mat on the edge trim ? Goggles every time measuring and mixing the Catalyst. Sorry to say it, but just putting another thin coat of float-coat over the whole roof will not fix that roof problem. A waste of time and someone’s money.

I’m not sure who has taught you this but , where the gel coat had lifted fron trim where you did repair the raised trim was not nailed down properly , the gelcoat you fibreglass repaired onto was not power sanded what won’t last more than a year , the roof needs to be power Sanding back to fibreglass even then I would re fibreglass all roof , rubbing a-bit of acetone on gel does nothing I can assure you, fibreglass roofs don’t peel the gel because they not been sanded , soon as the styrene has released from fibreglass roof and Are fully cured it can be gelcoat we sand them to take off burrs and and rough edges , I will assure the roof you repaired in years to come will look alot worse than It did before you started it 😂😂 hope you take my advice on board it’s not a dig at you if you even need help or advice message me

Is this roof leaking?

how money much ?

Can you give it 2 coats

Job well done but you could lose your life with no mansafe line or edge protection.

This is a guy who thinks he’s a fibreglass roofer

That one sheet of sandpaper won’t last to do that whole roof

Wtf have I just watched

Total amateur job..

Mute guy