This video shows how I brought a full frame DSLR camera back to life and full function after it had been completely submerged in muddy river water.
Nikon D-610 camera: amzn.to/2fS7tDk
Cleaning Kit: amzn.to/2y3wWQy
Mini Screwdriver set: amzn.to/2fO5Hzl
Check out my book: amzn.to/2fQ357H
My Children's book: amzn.to/2xfDnw3
This was definitely not a planned video but I thought I would share my experience in case it might help some others. It is a horrible feeling to think you just ruined expensive camera equipment. As I show in the video there just may be some hope if you handle the situation appropriately.
In my case the camera fell off a tripod, bouncing off a dock before hitting the water. The camera landed in muddy water that was about two feet deep. I had to get in the creek to retrieve the sunken Nikon camera. It was probably completely submerged for about two minutes. When I was back on the dock I wanted to get the battery out right away but notice it was already missing (this might have been a good thing). The camera was completely soaked with water behind the view finder and the lens was a mess with water and dirt behind several glass elements.
I went and found a large bag of rice with the idea to leave the camera sitting in the rice for several days in an effort to draw out the moisture. I left the camera in the rice for 5 days but then decided the rice trick would not be enough. I decided to then dissemble this Nikon D-600 to clean and dry out the individual components.
Dissembling the camera was a last resort but salt and impurities in the water could damage internal parts so I felt it a necessary procedure. With the correct screw drivers and a system to keep track of all the screws and components, the camera dissembling was not as complicated as I feared. Video taping the steps help me reassemble the camera correctly.
This particular camera was a Nikon D-600 and I imagine the Nikon D-610 is constructed similarly.
Music by incompetech.com
11 сен 2024
