How To Repair Boat Gelcoat [MATERIALS LIST👇] | BoatUS

Подписаться 68 тыс.

Просмотров 766 тыс.

50% 1

BoatUS Magazine's Mark Corke takes you through the steps for how to repair boat gelcoat. This gel coat repair DIY if you need to fix a boat ding, crack, or scratch is not difficult and could save you a lot of money by doing it yourself and still get professional results. The process for repairing gelcoat on a boat (on flat surfaces) starts by preparing the area to be repaired by thoroughly cleaning with soap and water and then acetone. Use a Dremel with a burr bit to open up the repair area, then vacuum the dust. Mix the gelcoat according to manufacturer directions and add any coloring to match your boat's gelcoat. Tap it into the repair and overfill. Once dry, use wet sandpaper to sand it flush with the surrounding surface. Use cutting compound then finish with a little wax to finish it up.👇Scroll down for a complete materials list for tools and materials used in this video. Read more about gelcoat repair: www.boatus.com/Search?term=ge...
🚩Enjoy this video? Become a BoatUS Member today to get 25+ valuable benefits including a subscription to award-winning BoatUS Magazine! boat.us/e/sy-join
🚩Visit the BoatUS Magazine website: www.boatus.com/Expert-Advice.
BoatUS is the nation’s largest association of recreational boaters with more than half a million Members. We provide a diverse offering of services including marine insurance, on-the-water towing provided by TowBoatUS, the nation’s largest fleet, plus boat financing, graphics and lettering, representation for boaters on Capitol Hill, the award-winning BoatUS Magazine and much more. For more than 50 years, BoatUS has made boating safer, more affordable and more accessible.
🚩Download the BoatUS App today to access NOAA marine weather, tides, exclusive Member discounts, and your BoatUS account. Assistance on the water has never been easier with TowBoatUS CONNECT in the BoatUS App - the fastest way to get a tow! boat.us/sy-app
🚩Connect with us:
/ boatus
/ boatus
/ boatus
/ boatus
/ boatus
🚩MATERIALS LIST
⚓ Disposable respirator: www.homedepot.com/p/3M-Sandin...
⚓ Acetone: I used an Evercoat product, lbut any acetone is fine: www.evercoat.com/product-detai...
⚓ Blue painters tape: www.3m.com/3M/en_US/company-u...
⚓ Dremel rotary tool: www.dremel.com/en_US/products...
⚓ Dremel bit: www.dremel.com/en_US/products...
⚓ Gelcoat for almost any premixed boat color: www.iboats.com/shop/paint-and... (Comes with catalyst)
⚓ Syringes: www.walmart.com/ip/Monoject-C...
⚓ Plastic mixing sticks: www.westmarine.com/buy/west-s...
⚓ Wet/Dry Sandpaper (also available at any home improvement store): www.westmarine.com/buy/3m--we...
⚓ Polishing compound: www.westmarine.com/buy/3m--pe...
⚓ Buffing machine. The one I have is no longer available, but this is the equivalent: www.dewalt.com/products/power...
⚓ Compounding pad: www.westmarine.com/buy/3m--pe...
⚓ Polishing pad: www.westmarine.com/buy/3m--pe...
⚓ Polish / Glaze: www.3m.com/3M/en_US/company-u...
⚓ Collinite Wax (bottle looks different now): www.westmarine.com/buy/collin...
#gelcoatrepair #gelcoat #boatus #satisfying

Авто/Мото

Опубликовано:

11 ноя 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 456

@glowgrrr 3 года назад

Thank you for this brilliant instruction video. I have a couple dents in the gel coat that needs fixing, and this made me confident i will be able to do it myself.

@boatus 3 года назад

Thanks so much for the feedback, glowgrrr! We're thrilled you found it helpful and hope the repairs go smoothly. You may want to check out our two other gelcoat repair videos as they may offer some additional techniques and explanations you may find useful depending on the location of the repairs. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-i2w85yvrbHk.html and ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5EapSjzjAyQ.html

@michaelwarman169 2 года назад

Wish I found this video BEFORE I did my crappy repair. Start again 😂😂

@boatus 2 года назад

Thanks for watching, Michael, and glad you found it helpful. Do check out our other gelcoat repair videos (link to playlist below) for additional tips and techniques that might help you out depending on where the repair is and the type of repair. They also cover frequently asked questions we've had throughout the series like the difference between waxed and unwaxed gelcoat, and what is the glaze Mark speaks of. Good luck with your project, and let us know how it goes! ru-vid.com/group/PLSrVa8gUFaPwF4oz5H4JmSEkdlTwkCrYq

@generationfunk 5 лет назад

I am so baffled as to why anyone would dislike this brilliant piece of workmanship

@boatus 5 лет назад

Thanks for watching, and we appreciate your feedback!

@chroniclesofstuntbucket3522 2 года назад

Wooden boat snobs 😁

@sned442 6 лет назад

Thanks! Very helpful. And thanks for answering the question below about the "glaze" you mention. I had the same question.

@patriciabruce2081 6 лет назад

This was great to see someone do it so patiently showing all the steps. Thank you!

@boatus 6 лет назад

Thanks for watching!

@stevenmcgonagle5597 5 лет назад

Great video, learned a couple things! Thank You!

@rtarchitectrt 5 лет назад

Wow. This was an EXCELLENT explanation and video. Thank You!

@boatus 5 лет назад

You're very welcome, and thank you for watching!

@Fireship1 6 лет назад

Very nice repair. This is why I'm a Boat US member! Your all about boating, from the legal to the maintenance , and everything in between!

@boatus 6 лет назад

Awwww, thanks, Fireship1! We appreciate you being a member, too!

@petercleeland6478 Год назад

Great video. I have a few repairs todo and your instructions are clear and informative. Many thanks.

@harperhatheway6081 6 лет назад

Thank you, learned something!

@raulcubas6000 5 лет назад

That repair looks to be very simple to do so next time rather than sending it out I will attempt it myself! thanks again for the valuable instruction!

@boatus 5 лет назад

Thanks for watching, Raul. Yes, it's not as difficult as many people think. Proper prep is the key. Good luck with your repair, and let us know how it goes!

@peakdiscoveries 5 лет назад

I don't know why anyone would dislike this, thanks so much, great vid

@boatus 5 лет назад

Aw, thanks for watching and commenting, Peak! Glad you found it helpful.

@ricardobrown8746 4 года назад

Anyone who dislikes the video does fiberglass repair and he just made things so much harder for them.

@mikegarcia9786 4 года назад

Definitely makes me feel a little better about cleaning up a few small marks on my boat. Thanks!

@boatus 4 года назад

Thanks for watching, Mike! Good luck with it. Make sure to watch our video on repairing gelcoat on vertical surfaces for additional tips and techniques. We've also got a few videos on spraying gelcoat and repairing spider cracks coming out in the next few months. Make sure to subscribe to receive notifications when new videos are posted!

@raylynch8419 4 года назад

Great video. Very well explained and easy to follow. Thank you, Ray (Australia)

@boatus 4 года назад

Thanks for watching, Ray! Glad you found it useful

@user-th8ok6fo9j 6 лет назад

A great video, very clear and simple. Now let me go and fix the boat. Thanks

@boatus 6 лет назад

Thanks! Hope it goes well. And make sure to subscribe to our channel to receive notification when new videos are posted. We have one coming up in a few weeks on how to repair gelcoat on vertical surfaces, such as the hull.

@paulmorales2623 5 лет назад

effective teaching - well done. thanks for putting this on the tube. gonna try it!

@boatus 5 лет назад

Thanks for watching, Paul. Let us know how it goes!

@jerrychf 5 лет назад

Wow! Prefect repaired! I also want to learn about repairing geocoat for my boat and i saw it crack at some point. Thanks for your video, very detail and clear about the instruction!

@boatus 5 лет назад

Thanks for watching, Jerry. Glad it was useful!

@sparks7227 5 лет назад

This video is very helpful. It gave me the confidence to repair my boat.

@boatus 5 лет назад

Thanks, Dave! Glad it was helpful. Good luck with your repair. Let us know how it goes!

@jolse1 6 лет назад

So easy, thanks for shearing 😃

@lukegermanakos1917 6 лет назад

Very helpful. thanks

@onawhim9079 6 лет назад

Good job Mark, I've got some screw holes to attack but I'm feeling confident after watching your video that with some epoxy and gel coat repair I should be able to tidy it up nicely!

@boatus 6 лет назад

You're welcome, and good luck, Simon. Send us some before/after photos if you get a chance! We'd love to see how your project turns out.

@augustmielke7444 5 лет назад

Well done, thank you 👍

@mikebode2376 6 лет назад

Thank you, very informative!

@boatus 6 лет назад

Thanks for watching!

@F15EKimo 5 лет назад

Great video! Takes some of the intimidation out of the repair process.

@boatus 5 лет назад

Thanks for watching, Jim!

@vinnitca1990 3 года назад

What a great video! Easy to follow! Thank you!

@boatus 3 года назад

Thank you for watching, Harrison!

@moacirfdr-imbituba-sc2818 2 года назад

I am Brazilian from southern Brazil. The video guided me to repair the gel coat on the hull of my 19ft sailboat. Congratulations.

@boatus 2 года назад

Thanks for watching, and we're thrilled you found it helpful!

@theblueboy20 5 лет назад

Thanks for the info just purchased my first JetSki with a few chips I have never played with gelcoat before great video

@boatus 5 лет назад

Glad it was helpful! Let us know how your project goes.

@skeeterd5150 4 года назад

You’ve convinced me! I’m definitely going to stop biting my fingernails

@boatus 4 года назад

Go for it, skeeterd! The hardest part is matching the color, and that's not all that hard either. Let us know how it goes!

@WildeGreg 5 лет назад

Great video. Nice simple breakdown of the steps.

@boatus 5 лет назад

Thanks, Greg!

@bunkman64 3 года назад

THANK YOU! This was a VERY helpful video, I live in St Augustine and have some scratches and small chips on my bow where the current pulled me into a barnacle covered bridge pylon. Best repair video I have seen yet. Again, THANKS!

@boatus 3 года назад

Thanks, Bunk! Glad you found it helpful. Do check out our other two gelcoat repair videos as well since you may find additional info that will help you if any of the repairs are on vertical surfaces. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5EapSjzjAyQ.html (vertical surface repairs) and ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-i2w85yvrbHk.html (spider cracks). Good luck with your project and let us know how it goes!

@dianesullivan8795 3 года назад

Excellent~ I'll be doing a lot of my own repair work. Thanks for the tips!

@boatus 3 года назад

Thanks so much for watching, Diane! It's not hard if you you follow the steps. Be sure to watch our other two gelcoat repair videos for additional tips and a discussion of waxed vs nonwaxed gelcoat. There are a couple other techniques that might help you depending on where you're doing repairs. Keep us posted how it goes!

@georgekerkines7988 4 года назад

Great Video and the instruction nice and clear. THANK YOU!

@boatus 4 года назад

Thanks for watching, George!

@lourimbach6650 3 года назад

Very helpful instructional video Made it look easy, showing all the steps in completing the repair Thanks

@boatus 3 года назад

Thanks for watching, Lou!

@wr5610 5 лет назад

Love it. Going to try it on my Kayak. Thanks for video.

@boatus 5 лет назад

Thanks for watching, Werner. Good luck with your repair and let us know how it goes!

@elgen13 6 лет назад

Thanks for the video, came in very needfull !

@boatus 6 лет назад

You're welcome, Erik! Stay tuned ... we just filmed a video on repairing gelcoat on vertical surfaces, which is a slightly different process. If you haven't already, be sure to subscribe to our channel for notification when new videos are posted.

@brt-jn7kg 6 лет назад

Thank you for taking the time to post this i have a 1964 Crestliner Challenger 14 foot fiberglass boat. I've converted from an empty skiff to a small center console. Ive hot several small places like this to repair. Look forward to using your information to repair it. Thank you

@boatus 6 лет назад

Thanks, brt 123! Glad you found this helpful for your project boat. Check back this Friday, July 20, at around 2 p.m. for a new video showing you how to do gelcoat repairs on vertical surfaces, like the hull or topside. It's still pretty simple to do for the average boat owner--if you can use a paintbrush and a sander, you can do that one, too. Oh, and if you have documented the conversion/makeover, do share it with us over at the magazine!

@dinosman5232 4 года назад

Tqvm for sharing Michael, I have learned something new today :) from down under Australia.

@boatus 4 года назад

Thanks for watching, Din. Glad you found it helpful. We have another video on how to repair gelcoat on vertical surfaces if you search our channel. It's a similar process but there are some helpful tips for that specific application.

@ericmarshall4085 5 месяцев назад

Great video. Simple & effective. Thanks for posting. Appreciated!

@boatus 5 месяцев назад

You're very welcome, Eric. Thanks for watching!

@chrismorrison8524 3 года назад

Great video. Very clear with handy tips to make this process easier

@boatus 3 года назад

Thanks so much for watching, Chris. Lots of folks are afraid to tackle gelcoat repairs themselves, but it's really not that difficult if you have the right materials, prep properly, and follow the steps.

@jpartington5358 2 года назад

Thanks for this- it was very efficient. Most RU-vid videos drone on and on. I put this on 1.5 speed and now will go and do my repair!

@boatus 2 года назад

Thanks for watching, J. It's not nearly as difficult as most people think. You just have to follow the steps. You may want to check out our other gelcoat repair videos for additional tips and techniques that may help depending on where your repairs are located: ru-vid.com/group/PLSrVa8gUFaPwF4oz5H4JmSEkdlTwkCrYq Good luck with your project and let us know how it goes!

@1dowsey 5 лет назад

Very helpful thank you

@firetrt01 6 лет назад

Best jel coat video on you tube

@boatus 6 лет назад

Thanks, Bob! Make sure to subscribe to our channel for notification on an upcoming video on how to repair gelcoat on vertical surfaces.

@macbringy 5 лет назад

Really nice tuition. I learnt a lot. Thanks

@boatus 5 лет назад

You're welcome, Brian! Thanks for watching.

@pashkoskoda3862 3 года назад

Great job! Thank you for sharing.

@boatus 3 года назад

Thanks for watching!

@petergoddard7711 3 года назад

thank you for showing me how to fix chip or dents in boats my wife and i going bye our first boat it needs alot of work and your videos help us more than you ever no kind regards pete from Australia

@boatus 3 года назад

Hi Pete! Thanks for watching from Down Under, and we're thrilled you are finding our videos helpful. Good luck with the new boat next season, and feel free to check out our full library of boat handling videos as well! ru-vid.com/group/PLSrVa8gUFaPwoBcTU1ojy9t7nV2JSQw27

@MrMegdiver 6 лет назад

Fantastic...thank you for this very helpful video...

@boatus 6 лет назад

You're very welcome! Don't forget to subscribe to our channel to receive notification when we post new videos.

@alanmountain5804 6 лет назад

Great video and a big help. Thanks buddy

@boatus 6 лет назад

You're welcome, Alan! Be sure to subscribe to our channel. We've got a great video coming up in the next month or so on how to repair gelcoat on vertical surfaces. It's equally as doable for the average DIY-er, just a slightly different technique.

@jamierobertson2129 6 лет назад

Well done very detailed. Thanks

@boatus 6 лет назад

Thanks for the love, Jamie! Be sure to subscribe to our channel to receive notification when our new videos are posted. Also check out our new gelcoat repair video for vertical surfaces.

@tristanschaper281 2 года назад

Fantastic video, thank you!!

@boatus 2 года назад

Thanks for watching, Tristan!

@augustinkrstulovic1260 2 года назад

Very useful information to keep bogat in the spotless condition.

@boatus 2 года назад

Thanks for watching, Augustin! Glad you found it useful. Be sure to check out our other gelcoat repair and maintenance videos for additional tips and techniques. ru-vid.com/group/PLSrVa8gUFaPwF4oz5H4JmSEkdlTwkCrYq

@scottydavis1813 3 года назад

I used the video to repair my gel coat and it came out perfect

@boatus 3 года назад

Woohooo, Scotty! That's fantastic. Thanks so much for letting us know, and we're happy the video was helpful.

@jaynedurden9989 4 месяца назад

Great video. Clear and easy to follow.

@boatus 4 месяца назад

Thanks for watching, Jayne! Glad you found it helpful.

@poppopbuilds6537 5 лет назад

Thank you. Great video.

@boatus 5 лет назад

Glad you found it helpful. Thanks for watching!

@Talonshields 3 месяца назад

Great instructional video.. right to the point with great tips. Thank you !!

@boatus 3 месяца назад

You are very welcome, Talon. Glad you found it helpful!

@alecharper515 17 дней назад

Brilliant. Thanks, mate!

@boatus 16 дней назад

Thanks, Alec. If you are looking at doing a gelcoat repair, check out our full playlist. We have more videos that show several different techniques and offer tips that might be helpful depending on the location, size, and depth of the repair. ru-vid.com/group/PLSrVa8gUFaPwF4oz5H4JmSEkdlTwkCrYq

@TR4zest 3 года назад

Super clear demonstration. Good stuff. Am subscribed.

@boatus 3 года назад

Thanks for watching and subscribing, Brian! Glad you found it helpful

@BStavFishing 4 года назад

Thanks for this ! Nice job!!

@boatus 4 года назад

Glad you enjoyed it!

@GrahamDodd8 4 года назад

Really well presented - thank you

@boatus 4 года назад

You're very welcome! Glad you found it useful. And stay tuned ... we've got a couple more gelcoat-related videos in the works.

@JohnTaylor-zq7go 2 года назад

Love it...thanks very much. Good job!

@boatus 2 года назад

You're welcome, John! Thanks for watching

@kobiroar4221 5 лет назад

Nice straight to the point sorted.

@boatus 5 лет назад

Thanks for watching, @kobiroar!

@dansiddall3618 4 года назад

great tips, thank you!

@boatus 4 года назад

Thanks for watching this one, too!

@clivethewritermadenglishma4042 5 лет назад

I was able to follow and understand this completely. Made for chaps like me.

@boatus 5 лет назад

Thanks, Clive! Glad you found it useful. Let us know how your repairs go

@CadohaAdventures 5 лет назад

Appreciate that video, thanks for sharing, that’ll be me repairing the damaged caused from nicking the side of the boat on the pontoon 🙈

@boatus 5 лет назад

Ooopsies! Once you make the repair, no one will know. Your secret's safe with us.

@haroldvietti2233 6 лет назад

Thank you this really helps

@boatus 6 лет назад

You're quite welcome, Harold! If you haven't done so already, make sure to subscribe to our channel for notification of more great how-to videos, including one coming up on how to repair gelcoat on vertical surfaces, such as the side of the hull.

@SandroSchwengber 3 года назад

Thank you for this video

@boatus 3 года назад

You're very welcome! Thanks for watching. Don't miss our other gelcoat repair videos--each has a little different technique and tips to help with your specific application. ru-vid.com/group/PLSrVa8gUFaPwF4oz5H4JmSEkdlTwkCrYq

@dougowens2686 4 года назад

Great job looking forward to more

@boatus 4 года назад

Thanks, Doug. Do check out our other gelcoat video on repairing gelcoat on vertical surfaces. There are some good tips there. And we just happen to be shooting two more right now -- one on repairing spider cracks and the other on spraying gelcoat. Look for those in the next few months!

@umutsoysal6792 2 года назад

Thanks a lot, pretty concise!

@boatus 2 года назад

You're very welcome! Thanks for watching, umut.

@josephshilling6926 Год назад

Great instructions video! Thanks

@boatus Год назад

You are very welcome, Joseph! If you haven't done so already, we recommend viewing our full playlist of gelcoat repair videos for additional tips and techniques that may be useful depending on where the repairs are located: ru-vid.com/group/PLSrVa8gUFaPwF4oz5H4JmSEkdlTwkCrYq

@Heartgator 5 лет назад

Outstanding!

@boatus 5 лет назад

Thanks for watching!

@robertovalls Год назад

Great video thanks!

@boatus Год назад

Thanks for watching, Roberto! Glad you found it helpful. Do make sure to check out our other gelcoat repair vids for additional tips and techniques: ru-vid.com/group/PLSrVa8gUFaPwF4oz5H4JmSEkdlTwkCrYq

@Handygrrl Год назад

Thank you!

@boatus Год назад

You're welcome, DS. Thanks for watching!

@steveadams2888 6 лет назад

what a terrific job made too look so easy

@boatus 6 лет назад

Thanks, Steve! Glad you enjoyed it.

@johnbainbridge2452 4 года назад

Excellent tutorial thank you

@boatus 3 года назад

Glad it was helpful!

@spacey_jones 3 года назад

Top! I did learn something, thank you!

@boatus 3 года назад

Thanks for watching, Casey! Glad you found it helpful. Be sure to watch our other gelcoat repair videos for additional techniques and explanations: ru-vid.com/group/PLSrVa8gUFaPwF4oz5H4JmSEkdlTwkCrYq

@patrickmalone6802 4 года назад

Fantastic - thanks!!!

@boatus 4 года назад

Thanks for watching!

@63256325N 5 лет назад

That was really quite easy, thank you for the tip. 😁 👍

@boatus 5 лет назад

Glad you found it useful, Duncan. It's totally doable, even for those with average skills. Let us know how your repair goes!

@63256325N 5 лет назад

@@boatus No repairs for me personally, I was curious as to how gel coat defects get fixed. I've been following an Australian fellow named Ross who's building a 40 some odd foot fiberglass catamaran. Basically living life vicariously through YT. Thanks for the reply. 😉

@Islands4Fun 5 лет назад

Great! Thank you

@boatus 5 лет назад

Thank you for watching! We also have another video on repairing gelcoat on vertical surfaces at ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5EapSjzjAyQ.html

@baluba006 Год назад

Great thanks for a nice video!

@boatus Год назад

You're very welcome, and thanks for watching! Make sure to check out our full playlist of gelcoat repair videos as there are other tips and techniques you may find helpful: ru-vid.com/group/PLSrVa8gUFaPwF4oz5H4JmSEkdlTwkCrYq

@ufukozbir649 3 года назад

nice and clear, cheers!

@boatus 3 года назад

Thanks for watching, Ufuk!

@jimthompson717 5 лет назад

Nice. About to repair a chip on the top of the transom. This helped

@boatus 5 лет назад

Thanks for watching, Jim! Good luck with your project.

@herbertstolz2591 2 года назад

Well done...Thanks

@boatus 2 года назад

Thanks for watching, Herbert!

@stewarthightower4307 3 года назад

Excellent information!

@boatus 3 года назад

Thanks for watching, Stewart!

@hayrettinbuyukeren Год назад

Amazing job!

@boatus Год назад

Thanks for watching High•red!

@morbidfollower 2 месяца назад

great video thank you

@boatus 2 месяца назад

You are very welcome! Thanks for watching. I will suggest checking out our playlist of gelcoat repair videos for some additional tips, tricks, and techniques depending on where the repair is located and how large. ru-vid.com/group/PLSrVa8gUFaPwF4oz5H4JmSEkdlTwkCrYq

@geneonlbk 5 лет назад

great tutorial, thanks

@boatus 5 лет назад

Thanks for watching, Gene.

@victormanuelbolivarleandro3732 5 лет назад

Great video

@boatus 5 лет назад

Thanks for watching! Be sure to subscribe to our channel to get notifications of more helpful videos coming out regularly.

@boblowndes9613 5 лет назад

Great tutorial thanks

@boatus 5 лет назад

Thanks, Bob! Glad you found it helpful.

@narineramotar7426 4 года назад

Nice and quick!

@boatus 4 года назад

Thanks for watching, Narine!

@tfields51able 6 лет назад

Thanks very very helpful alot and hope to see more

@boatus 6 лет назад

Thanks for watching! Subscribe to our channel to see more new videos we're planning to release in the coming weeks.

@funkqueen1 6 лет назад

What if the repair is on the side of the boat, won’t the gel run down?

@tfields51able 6 лет назад

Joanie, you must ask, where it says add to public comment, then you get a respond's from Mark who knows

@boatus 6 лет назад

Great question, Joanie! The process for restoring gelcoat on vertical surfaces is a little different. Stay tuned for an upcoming article and video on this very topic. The principles nearly the same; it just requires some different techniques. --Mark

@jamiejames9828 2 года назад

Great video, glad I watched,I would have messed up bad if I hadn't

@boatus 2 года назад

Thanks for watching, Jamie! You may want to have a look at some of our other videos on gelcoat repair. There are some other tips and techniques you may find helpful depending on location and the type of repair needed: ru-vid.com/group/PLSrVa8gUFaPwF4oz5H4JmSEkdlTwkCrYq Good luck with your project! It's not hard; just a lot of steps. Let us know how it goes.

@mdvs42 3 года назад

loved the video I was raised in two body shops so familiar with some of your workings but have always want to know how to get those nasty little oyster ships out of my boat, and wasn't aware there is a gelcoat repair process will give it a shot.

@boatus 3 года назад

Thanks for watching, Mt. Davis, and glad you found it helpful. It's not a difficult repair to do yourself. You just need to follow the steps, and you'll have a finish you can be proud of! Let us know how it goes.

@robwinn8213 2 года назад

Great video I need to do this on a Yamaha EX I just bought. Thank you for the video.

@boatus 2 года назад

Thanks for watching, Rob! You may want to watch some of our other gelcoat repair vids for additional tips and info: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TJHk81_nKRI.html Good luck with your project!

@pollyrobinson3877 4 года назад

Awesome!!

@boatus 4 года назад

Thanks for watching, Polly! FYI, we have two other gelcoat videos--one for repairing gelcoat on vertical surfaces and one for fixing spider cracks. All three show slightly different techniques that might work better for different applications.

@thebritishboatguy3130 Месяц назад

Great video thank you

@boatus Месяц назад

Thanks for watching BBG! Glad you found it helpful

@fishnbox 3 года назад

Thanks good clear consice video

@boatus 3 года назад

Thanks for watching, Steve. Glad you found it helpful. If you haven't done so already, check out our other gelcoat repair videos for several other techniques you may find useful depending on the size and location of the repair.

@roboeng9128 Год назад

Makes it look easy.

@boatus Год назад

It's not hard, Robo. Just a lot of steps to ensure a good finish. If you haven't seen them already, check out our other gelcoat-repair vids for more tips and techniques depending on where the repair is located and the type of the repair: ru-vid.com/group/PLSrVa8gUFaPwF4oz5H4JmSEkdlTwkCrYq