How to Repair Clear Coat Fix 100% all types

Подписаться 853 тыс.

Просмотров 12 млн

50% 1

How to guide on repairing old peeling or damaged clearcoat with amazing results you can do at home for small money and with professional results!. This guide is a complete fix for all types of clearcoat failure no matter the kind!
Guys Now You Can Learn Professional Spray Painting & Body Work Repair With Step-By-Step Complete Video Training...Here: bit.ly/LearnAutobody
How to paint and customize wheels Here: • Turning a $100 set of ...
Send me pics of your car, advice or whatever here / mad4motors
Watch me Paint the Hood- • How to Paint Your Car ...
Similar videos that you may enjoy: • How to Repair Curb Ras...
• How to Repair Rip or T...
Products used:
2K Clearcoat aerosol- amzn.to/2ANeEUJ
Primer Aersosol- amzn.to/2DctNR7
Sandpaper assortment- amzn.to/2RSrcUg
Masking Tape- amzn.to/2RLsZuy
Tack cloth- amzn.to/2RK60jv
Body Filler Bondo amzn.to/2Mai48q
My Camera and gear
Canon Eos Camera -amzn.to/315aKSE
Sturdy Tripod -amzn.to/2Wm4erX
50mm Stm Lens -amzn.to/2HUCgut
Timelapse iphone 8 -amzn.to/2WPEvrn
Phone Tripod -amzn.to/3183gxW
Camera Bag -amzn.to/2JTPh9V
Connect with me:
Facebook- / mad4motors
Instagram- / mad4motors
Disclaimer:
Due to factors beyond the control of Mad4Motors, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Mad4Motors assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Mad4Motors, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Mad4Motors.

Хобби

Опубликовано:

17 мар 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 4,2 тыс.

@Mad4Motors_ 6 лет назад

Watch me spray paint the Hood on this car! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_owAbAw7FSE.html

@sopheakchhaing3727 5 лет назад

Hi there! First thanks a bunch for the video. I'm planning to paint my faded trunk over the weekend. wonder if a can of both base and clear are enough?? Thanks

@kaminski3036 5 лет назад

Nice working!

@richardneuberger6611 5 лет назад

Mad4Motors

@leonardoombalino9422 5 лет назад

Mad4Motors

@Choconuss 5 лет назад

so i have a small convertible its RED, which one do i have to buy? or what? if i want Blue???? and after you do the last step, do you have to like polish it with Compound?

@tetlowracingteam 4 года назад

Dude I just found your channel. love your how to videos, straight to the point. All car repair videos should be like this, no face reveals, no telling me about your family/day/pets, no talking to the camera, no bullshit, just show me the car. Thank you, thank you, thank you.

@jamiiiepilton1530 4 года назад

Amen lol!

@Chris-kq7ko 4 года назад

No starting off the video with "what is up guys!? blah blah blah back with another video!"

@uponwavs5515 4 года назад

Exactly, nowadays every instructional video ends up being a vlog in the beginning

@Anna-sq7cn 4 года назад

Yeeeeeees exactly.

@rwtfallenjf25132 4 года назад

THIS. Other channels this would have been a 20 minute long video.

@-smp-scientificmethodpersp838 5 лет назад

Not bad for an Aerosol can! I also love how the video was short and strait to the point! Thanks a million

@boblong6796 5 лет назад

scientific method perspective I agree be nice if more youtube was like this

@Kgio-2112 5 лет назад

Strait? Of Gibraltar?

@duanegarrett4900 5 лет назад

@@Kgio-2112 😂

@ibraheemfathy 5 лет назад

and no music

@simonkosh30 4 года назад

@@ibraheemfathy And no 'HEY guys Whassup?'

@joesquash3198 Год назад

Just a quick comment for those who have not yet gone through the school of hard knocks. THIS IS NOT A QUICK AND SKILLESS JOB. You really have to follow every step in order to get good results, otherwise you get crap. Do not try to dry sand your clear coat off either --it will leave deep scratches. If you don't like the way it turned out, don't panic! Use 2000 grit sandpaper to wet sand, after you have let your clearcoat dry at least a day. Than use some compound with a buffer to really shine it up nice. You can save your paint job this way.

@nzmarco Год назад

Would you not lightly sand the base coat before applying the clearcoat?

@Oneklickmedia Год назад

@@nzmarco depending how your base coat look. If you notice a lot of runs, dust or imperfections you can do light sanding using fine grit. Clean it with a safe cleaning agent and use a tack rag to ensure no dust left behind before clearing.

@ModMINI Год назад

@@nzmarco Always lightly sand before applying clear or it won't stick.

@kojam1 11 месяцев назад

Agreed 1,000%. This is not a skilless endeavor. RU-vid videos are great for learning but at times I think they oversimplify things. Some intentionally others not intentionally. I don't believe the producer of this video was intentionally trying to mislead people. I wish I had his skill

@bryceyoung3418 11 месяцев назад

@@nzmarco yes, I feel like a step with skipped. I feel like they should have sounded defender after painting before clearcoat that’s just my opinion I could be wrong look like it would’ve turned out better if it was sanded before the clear.

@POME8 Год назад

This 100% works, I used different paint tho, keep it waxed every few months and use car covers during the scorching summertime and it will last you years, im going on 3 years now and it still looks as if I did it yesterday... This video is underrated!

@dimwitsadvocate6264 5 месяцев назад

Thank you for sharing your experience with the clear coating!

@MissMarie1377 5 месяцев назад

Do you know how to get specific colors in a spray can like that? I’m looking for black, for a 2002 Honda accord. Is that a generic enough color/car that I can use the spray cans from the auto parts store? Any help would be greatly appreciated. Thanks

@williamhartgrave6105 3 месяца назад

@@MissMarie1377 I get it mixed at my local paint supplier they will just put it in a can for you it cost more but nice for small jobs

@kenhurley4441 4 года назад

Tip, get a small bucket and put warm soapy water in it. Get a sponge to keep the sanding area wet. Reduces friction and you end up with a better job of sanding.

@Ac3banditt 5 лет назад

This guy just shut down 2 thousand paint shop across america lmao 💪🏻 real M.V.P

@markmikheyev6730 5 лет назад

Wade Wilson lol spray can jobs are shot

@stefanprijic6613 5 лет назад

Yeah panel shops rely on $500 cars coming in for repairs that exceed their price tag, RIP panel shops Side note, this is a temporary touch up and won't last very long and is only useful for flipping a cheap car

@biggadigittydee7607 5 лет назад

Gotta love capitalism

@JKazama182 5 лет назад

Yeah right! Until you do this and realize there is a huge step he missed, orange peal! Not to mention, that was just a fender! 75% of people dont have the time to can spray paint a whole car let alone the time it takes to sand by hand!!

@biggadigittydee7607 5 лет назад

JKazama182 He does mention orange peel, and this method is meant to repair individual panels not an entire car.

@karab5771 3 года назад

Sooo I've 'inherited' 3 cars that need this so badly. Thank you for this, I may be broke but I'm proud of what I do have and like to take care of my stuff. You are awesome.

@Robbie-mw5uu 8 месяцев назад

why is inherited in apostrophe did you steal them?

@hiker64 Год назад

My toxic trait is buying all the supplies thinking I'll just do it myself and then throwing them out 5 years later after everything is dried up and ruined.

@Chazfunaccount Месяц назад

😂 same. My wife said that I hoard.

@spenceradamsjr 4 года назад

I really appreciate that you don't waste time. You show what to do and the results without wasting time. Fantastic!

@DrummerDelight Год назад

And he does an amazing job. I could only wish to do a job like that. Thank you.

@Scotford_Maconochie 4 года назад

When applying a 2k clear coat make sure you use a respirator (eg. 3M 6035) as it is toxic to respiratory system.

@ashtongreen6270 4 года назад

ASG66 The trolls are showing their ass today I see. You enjoy breathing problems...I’ll enjoy getting old enough to watch my grand children grow....

@investigate311comittee 4 года назад

@ASG66 do you also think seatbelts are for snowflakes too

@Caveman473 4 года назад

It cures inside the lungs 😂

@therealaveragesmitty 4 года назад

@KaSwipeSter 4 года назад

ASG66 excuse this man for not wanting to fix the non-existent clear coat in his lungs. Enjoy your lung cancer.

@dannyxcon9999 3 года назад

I know I am 2 years late to the party but wow this is some amazing do-it-yourself work

@yishaithegift9953 3 года назад

Amazing bro. My car has the same clear coat damage... I'll most likely get carried away and repaint the entire car.

@IBK66 2 года назад

you and me both I am doing this on my BMW 99 5 series...and I am a female... lady, I must say....lololol..Tell me how did your come out?

@bugeyegang7573 2 года назад

@@IBK66 we're you able to do it on your vehicle? How were the results?

@dollikareworked Год назад

The body shop asked for $1300, let’s see how good I’ll do it myself

@simonbainbridge3507 Год назад

Fantastic video. Straight to the point without missing any critical steps. Thank you!

@number1pappy 6 лет назад

I did this to a 22 year old Toyota pickup truck,figures I had nothing to lose. I was freaking amazed how good it turned out!...my advice to anybody who is thinking about doing this is just get over the fear of screwing s omthing up and just take your time and do it!...there are plenty of videos out there to follow although this one is very good!...I think you'll be amazed!

@MiguelFlores-bp9sn 6 лет назад

john crawford John afew years back I paint my uncle Thunderbird 70's red color base coat with top coat white pearl. It turned out very PINK. I must have let the red paint dry more time. My uncle gave away the car to my aunt...

@scottmcgill4414 6 лет назад

I'm thinking about doing this to my 300zx, any tips? How long did your recoat last for, definitely gonna get the K2

@healthygirlll 6 лет назад

retired, how long did it take you ,to do your truck

@junkie842 5 лет назад

Painted a car one time years ago, will never try that again! But paint repair? That's something I have done, and just like you said. Don't be scared of messing it up, just try it! You'll be amazed (if you get it right)

@kxngearner698 5 лет назад

toyota is a UGLY Piece Of SHIT no matter how old or new it is everything toyota makes is TRASH

@coltonjacobs5383 4 года назад

I really appreciate that you didn’t make this a 20 minute video on how to use a spray can like most people would do.

@briankoncyk3379 3 года назад

Awesome job! Very easy to understand the way you explained and demonstrated the process. I like the way you condensed the whole thing bit kept everything needed in a very good editor fashion. Thanks for sharing!

@stellabandante2727 11 месяцев назад

Fantastic!! Just what I was looking for. Thanks for making this so simple and straightforward.

@gregcy89 5 лет назад

Holy crap man! You just pro painted 20% of the car with 2 sprays. Amazing!!!

@OlBlueshound 6 лет назад

People tend to get a little hysterical about paint finish on older automobiles, this video is a great example of how a really quite presentable finish can be a achieved affordably & with a small amount of effort & work space available. No, this is not professional quality, but it is really amazingly good for spray cans & gives the car a new lease of life for a few years. Well done to you on sharing your skills on this as getting a cars paint professionally restored is almost beyond most of us financially now. And bonus is doing a section at a time is much easier than tackling the whole car at once.

@Mad4Motors_ 6 лет назад

Yes very true it can be very expensive, and doing a small section at a time you can do it at home, I'm doing n the hood next

@raymundomelendrez4295 5 лет назад

Mad4Motors did you finish it do u have a video of it?

@williamschuman4951 5 лет назад

Perfect if you have the time and not the money, I like it

@sixchiensblancs 5 лет назад

@@Mad4Motors_ Nice job! I have been working on my 1989 Mazda B2200... Funny thing is I was T-boned in an accident in 2002, the passenger door and front panel were damaged... so the door was replaced and panel painted... Well that is where most of the problems are!!! My door has rust on it, while the rest of my 30 year old truck is perfect, and I mean perfect!!! Thank you, Isabelle on Canada's West Coast.

@MrChristoKruger 3 года назад

Wow will this work on my vw beetle plastic bumpers?

@rick00770 2 года назад

Great points, I know very little about painting. I scratched up my firebird using too much pressure on a hard rubber fender, got lighter sand paper and went over it. But this method seems great, sounds like it will work, well done. Subscribed.

@alternativelivingbulgaria Год назад

I've got the exact same car with the exact same problem! This looks amazing, great job. Something I've been thinking about doing for a while, I just don't know how much life the thing has left in it.

@kathrynliu74 3 года назад

Awesome, the thumbs down are from auto body shops he’s putting out of business 👻

@ICON-11- 3 года назад

Soo true 🤣👌

@lismsthebenchandthebooth2230 3 года назад

I own a body shop lol and everytime somebody ask "is there anyway i can get it cheaper, my response is always the same....just do it yourself" that's how you save the most money on any job😎

@krazykozey2259 3 года назад

@@lismsthebenchandthebooth2230 exactly! Every one of my clients that asks this I point them to RU-vid. There's not a thing out there you can't learn from youtube. Basically all you're doing is paying me so you don't have to do it.

@lismsthebenchandthebooth2230 3 года назад

@@krazykozey2259 yup i agree...its the block sanding process that usually brings them back like "how much did you want to do this again"😂😂

@dannyruckert9359 3 года назад

Sand paper, tape, paper, canned spray paint, canned clear coat. What was cost? How many coats? Was there chemical reaction with factory paint/primer? Did the paint match? Of all colors only black is universal! But fade? I'm not in anyway in auto body. But I've seen many cheap paint jobs. This is just another gimmick! If you want to try. Try on a model car. If it doesn't work, at least it was cheaper than a real one!

@sta8ise 4 года назад

Finally, a video that is straight to the point! Thank you Sir...

@sounddesignsforyou998 3 года назад

Why can't everyone just do videos like this. No bull crap, no foul language just right to the point and an excellent tutorial.

@Mad4Motors_ 3 года назад

Thank you 👍

@snufbox 8 месяцев назад

@@Mad4Motors_ +1 There’s no need to hear everyone’s life story of why they’re doing it. Good job man.

@MrLuvgarden 2 года назад

I think your Video on Clear Coat repair is one the best ive seen on You-Tube. Your straight to the point and the job was trully helpful , thanks a bunch ! 👍

@joshbrookes6439 3 года назад

Just like all your other videos 10/10 perfection 👌 no FAFF ✅ no BS ✅ no selling ✅ just straight to the point ✅ Easy to follow instructions ✅ Expert advice from a master ✅ It's everything I want and need when researching how to do something on my cars. MOST UNDERRATED AUTOMOTIVE CHANNEL ON RU-vid!

@jcetrangelo 4 года назад

Great results! I wasn't expecting a finish like that with a spray can. Good work!

@davidogan Месяц назад

Shockingly good results! Thank you for demonstrating that doing the job at home with good knowledge can be achieved and yield excellent results.

@thehoofersclub 3 года назад

Very direct video with no goofy music. Nice!

@Mad4Motors_ 3 года назад

Yes sir, thanks 🙏

@gordoncrawley5826 29 дней назад

Why do RU-vidrs always have to add stupid music especially to videos of how to do things. Go Hollywood, go home.

@richardsmalley122 4 года назад

Really quick fix, looks user friendly. Paint and body shop would have been in the hundreds for sure. Good job.

@FluffyRaT 5 лет назад

Amazing! Brilliant video, results, pacing, camera work. A joy to watch and the content is spot on. More please!

@duncancoolidge4041 2 года назад

Quite amazing results and very reassuring so thanks for the instructional video. Prepping well obviously takes some time but the return for that effort is appears to be well worth it. I have a ‘95 Miata with custom pain that was horribly expensive and doesn’t come in spray cans. Hopefully I will be able to bypass the paint coat step and still get a acceptable end result.

@remnantfewministriesminist495 2 года назад

Same here.😔

@donporter8432 Год назад

Well, did you succeed?

@preludedudesi5208 5 лет назад

Dang nice job, turned out flawless

@TacoBellWerewolf 6 лет назад

Been a casual detailer for years, never seen anyone do a diy clearcoat repair. Excellent work man, it looks great. Wish I would have known about this a few cars back. The attitude then was 'clearcoat failure? you need a new paint job!'

@jakubzidek 6 лет назад

Michael Curry Did you just make almost the same comment on Reddit? lol

@JrVtec 6 лет назад

Still a new paint job actually which is the only way to fix it but a bit more affordable which is perfect for a car that doesn't warrant taking to it to a shop.

@splash5974 6 лет назад

I think thats what he did here...

@TacoBellWerewolf 6 лет назад

splash yeah I think 'diy' is the point rather than paying hundreds or thousands.

@tripperuk 6 лет назад

I was thinking the same, I bought a car about 6 months ago, and the previous owner had ignored some stone chips and maybe used a pressure washer on it, and the paint is peeling (meh the car was cheap) and I was thinking I would have to pay for a complete respray. Now I've seen this video, I can probably give it a go myself for a very small fraction of the cost.

@akimmbo 21 день назад

Good job. short and to the point. Ive got a football size peel on the hood of my older Kia Soul, it's baking in the Florida sun here. I used to fix my own vehicles and repaint and clear coat, just with cans, always came out fine. You reminded me that it's time to get back on the stick . Thanks. Subscribed.

@avazquez5852 11 месяцев назад

Excellent. Probably the best video I’ve seen for just such a repair. Awesome. Thank You.

@freedomfreakazoid 4 года назад

This is the best instructional video I have seen on accomplishing this task. I'm confident to take on my job now. Thanks !

@milspecmachine3014 3 года назад

The worst part of this is now you have to respray the rest of your car 😬 👍🏻 awesome job man thanks for the tips

@reydogmotor 2 года назад

WOW that finish was incredible ! Great job !

@Val-bw4bz 2 года назад

I don’t know what I enjoyed more, the paint job or your accent! ❤️

@karaboodavidson2769 4 года назад

Thank you for all your clear consise videos and fast forwarding through the sanding bits...brilliant!! If anyone ever thinks that they can't do this themselves, let them know a 51 year old woman with no auto bodywork experience made the paint on her C-class Mercedes look as good as new thanks to your videos. But my boyfriend keeps wonderi g where all his decks of cards keep disapearing to lol. Thanks again Mad4Motors!

@vonnettagraves-brooks8874 Год назад

I'm a 51 year old women too! You have inspired me to take on this project!😊

@chris_-in3ff 11 месяцев назад

that's awesome! has it started to peel again or has it lasted?

@margheritac2928 5 лет назад

Outstanding! Today I learnt something, getting over the fear of botching it up, thankyou.

@georgeyoung2336 2 года назад

Thank you for posting this video. It was extremely informative and your instructions where easy to follow along with. It’s amazing to me that you where able to get the results you got using spray cans. Very impressive. I have this very same problem with my HHR SS. A shop in my area gave me a quote of 5k just to prep and spray the passenger fender and door. After watching your video I’m definitely going to give it a try. So again thank you for taking the time to make this video and explain how this repair is done. Thank you

@ericklopezgraciano2962 9 месяцев назад

How did it go?

@psychedelix4294 5 месяцев назад

@@ericklopezgraciano2962Fr lol (my door is peeling) 😞

@Eener1000 2 года назад

If you are on a budget, then this is a good way to do it. If you don't have any time constraints you can even get a paintshop perfect result by letting the base coat dry a few days and then lightly smooth sand it with really high grit and later do the same to the clear coat with an extra step of polishing the clear coat. You can get a mirror finish with some extra time and elbow grease.

@classicbikerx3588 Год назад

Yep, 1000g wet sanding the base coat will make it shine. All of that orange peel is killing you

@JB-qw2jk Год назад

I was going to ask about that. I assumed you would need to wet sand the base coat and the first clear coat with longer time between each, so thanks for clarifying. I’m assuming also that most orange peel would be removed with a wet sand. Any issues spraying 2K clear over acrylic base coat?

@classicbikerx3588 Год назад

@@JB-qw2jk I have only ever used 2K clear on 2K paint or plain old enamel rattle can paint. I know many ppl use water based paints and then 2K clear them. It is popular with custom motorcycle helmets

@stoyannikolov1017 7 месяцев назад

Lol name 1 good paintshop who does this, all good ones are full of jobs, no time to waste you must have heard something wrong bud.

@davosholdos1253 4 года назад

Connor McGregor details cars after the lockdown.

@steveyousif6037 4 года назад

Davos Holdos i love u

@aww4954 3 года назад

Haha

@arneezyr1592 3 года назад

Who da fook?

@teenytinytoons 3 года назад

💀

@vergecryptocurrency4552 3 года назад

Sounds nothing like him

@nomad4715 4 года назад

Now you have to paint entire body 😂😂

@retrogamerdave362 2 года назад

So many people on the internet will say that "you can't do that". Well, you just did. Great job, cheers

@anthonyrudd7970 Год назад

Wow! Absolutely amazing end result.. and just taught me a new skill. Thanks heaps man!!

@pjmlenn1857 4 года назад

Ive just done this to my car. It looks great plus your video is straight to the point. Thanks.

@longrifle531 4 года назад

This worked out amazingly!! Been dreading paying for a new paint job because of the clear coat. Thank you so much for sharing this video!

@selmar735 3 года назад

I appreciate this video. I will be using your technique to prep my bumper for a wrap. I just didn’t know what grit to use in order to remove the clear coat properly.

@josemartinez-tv6nf 2 года назад

Simple fast and you go straight to the point awesome video thank you

@derrickallen2054 5 лет назад

I'd say that's excellent results from an aerosol can, impressive

@user-mq2ww7ux8z 3 года назад

www.trisco.com/products/pro-automotive-multimeter

@derrickallen2054 3 года назад

@@user-mq2ww7ux8z you are super cute

@user-mq2ww7ux8z 3 года назад

Thanks

@derrickallen2054 3 года назад

@@user-mq2ww7ux8z you are welcome. Lovely hair as well

@user-mq2ww7ux8z 3 года назад

@@derrickallen2054 nice car your pis showing

@WhatsMarlyUpTo 5 лет назад

Was looking for this exact tutorial as my 99 Tercel is peeling badly on the roof. Thanks for the clear, simple instructions. Going to watch your video on the hood area now.

@touncy1533 3 года назад

thinking of my roof on a 2002 svt.. how'd it turn out ?

@trents.b6903 2 года назад

This is dope! My 2006 scion tc got beat by the sun. Ordered all the stuff. My son is fixing it up. She looks brand new.

@robertluisb.9287 Год назад

I really enjoyed the short and simple video. This guy didn't waste no time with all the unnecessary talking and bs. Obviously if your pain is bad you going to go by the base coat. If your clear coat is messed up and obviously you know that you have to go by the clear coat. This video actually inspired me to start working on my classic car one panel at a time.

@nairblab4061 6 лет назад

A few tips.. - Once sanding is complete, PUT ON GLOVES. Your hands carry many oils, and washing them won't fix this. Touching the panel with your hands will transfer oils and compromise your work. - Clean panel with wax & grease remover on a clean lint free towel. Be sure to get all of the panel edges. Open adjacent panels (hood, door) to get to the edges if needed. - Mask off your area (if required), clean the panel again, then tack it. - Start your spraying in the "hard to reach" areas, such as the edge of the fender that's next to the hood, the edge by the door, the edge by the headlight, and the underside of the fender (wheelwell arch). Your normal back and forth spray pattern will most likely miss these areas. If the clear doesn't "envelope" the entire panel, and falls short on one edge, guess where it's going to peel first? Just some constructive tips, otherwise you did a good job. Judging by the fact that it is a 10+ year old Hyundai, you just wanted it to look better, which you definitely achieved.

@buddyclem7328 5 лет назад

*Envelop Envelopes are for *mail.*

@nairblab4061 5 лет назад

They're also good for storing household documents, photos, and birthday cards. Stay tuned for next week, when we talk about cardboard boxes.

@Xlr8ive 5 лет назад

@@buddyclem7328 didn't know

@Xlr8ive 5 лет назад

Good tips thanks.

@Cheepchipsable 5 лет назад

Well, once you have sanded, there is no need to touch the panel. I'm sure the dude knows you tips, but the fact he painted it on the car the way he did suggests he just wants a quick and easy job. He should get a few years out of it, since the 2k is pretty tough.

@Matthew-21_22 3 года назад

Awesome video. Quick, efficient great "to the point" how to video! What amazes me is how you can put clear over sanded rubbed out gray back to black! Before and after certainly looks outstanding.

@sespider 3 года назад

Going to check this out. Really hope it works. Walked out today, after 2 days of very heavy rain, and found TWO large water bubbles on the side of my truck. All because the 20+ year old clear coat had flaked some and now holding rain water.

@jmack3041 2 года назад

great video, ive searched for alot of videos and ive been quoted 1000s for my car, i didnt even want a fancy full respray just bonnet and fender to look decent and match the car.... similar clear coat issue. your video was brief and informative. im gonna do this on my own now. cheers

@SandiFTL 5 лет назад

Thank you! This is something I can do. Your video is short and sweet!

@ErinRaciell 4 года назад

This gives me ASMR and im loving it ✨😌✨ great job as always 👌

@scottwilliams5216 Год назад

What a lovely job mate. Mirror finish on it and out of a rattle can. Really nice job.

@TheOnlyRaceEngineer Год назад

The best no-nonsense, cheap DYI, spray paint video. great work @Mad4Motors

@ItsKibet Год назад

Great job.I am having this issue with my motorcycle tank.This kind of damage is very common with Honda's here across the pond. Now hyundai's pretty much have the paint peeling off completely.

@YahawahsChild-sw6vc 4 года назад

Thank you for saving me thousands of dollars...on my way to the store

@68chevelleconcours 2 года назад

Did you ever paint your car after watching this video? I paint cars for a living and I can only imagine the aggravation a person will go through after watching this video. Hopefully it went well for ya.

@simonnayzgi2573 3 года назад

He made it so nice and shiny you can see the man recording what a legend 💯🐐

@tomjones2348 3 года назад

Wow. Excellent presentation. No rambling on. Just right to the point and good camera work.

@Mad4Motors_ 3 года назад

I appreciate that!

@pamibaga2139 Год назад

Thank you for being precise and straight to the point.

@Manix461 4 года назад

Impressive! Concise, informative, methodical. Thank you for sharing the material and tools used. Cheers!

@Mad4Motors_ 4 года назад

Thank you for the nice comments 👍

@timothymorris6019 3 года назад

Just subscribed to your channel. Very informative, straight, and to point. I'm restoring my truck, and it has a lot of the problems that you show how to fix. I've saved a few videos and will definitely be using your knowledge to fix the issues. Thank you, very much.

@Mad4Motors_ 3 года назад

Great to here you are fixing it yourself. If you need any help at all send me a dm 👍

@enzofiero2924 2 года назад

Great video, great procedure and great results.. Kudos to your work!

@tonylatimer1308 3 года назад

Thanks, Mad. Loved the presentation & admired your skill.

@ranger2316 3 года назад

That was nothing less than amazing! Great job.

@vdgitaliano 4 года назад

A few more coats of clear and then a good wet sand with a high-speed polish and that paint would look like glass. Good job!

@porthos6914 4 года назад

Would this take away the orange peel?

@sportaholic4482 4 года назад

Definitely needs the sanding and polish to get rid of the orange peel and trash in the paint.

@SwayPromo 4 года назад

How do you do a wet sand and high speed polish?

@TheBlaert 4 года назад

@@SwayPromo rubbed down with very very fine grit sandpaper and water. It smooths things off and flattens the orange peel effect without removing too much of the clearcoat. Then when polished with a buffer it will shine again

@SwayPromo 4 года назад

TheBlaggert thank you

@thpxs0554 3 года назад

That’s the best video I’ve seen for these repairs. Great result

@Budrick3Gaming 19 дней назад

Wow that tird polished really really well! Good job!

@bobbyborysiak5103 4 года назад

Wow, great job! The car looks amazing where you touched up. I have a small patch of clearcoat that peeled somehow on my F30 front bumper thats needs to be done. If only I can have the guts to do what I just watched from you especially the sanding process. Just don't want to screw it up and make it looking worse!

@krikri3387 4 года назад

Use a high grit, like 800, so you will not damage the surface, and if the surface is not smooth then try to go lower and more aggressive grit like 600 or less. Make sure you use water while sanding

@pkasb90 4 года назад

This is the best video on RU-vid on paint a car.

@jrizzle9927 Год назад

One of the best DIY videos I've ever seen ! 👍🏼

@djsavage2421 2 года назад

Wow I thought I was pretty good with the spray can you surpassed me sir by far that is one of the best jobs I’ve seen from a spray can ever looks like he did it with a professional paint gun good job.

@newedgefrank3257 5 лет назад

Wow, that looked amazing.

@FWill-mv6qi 6 лет назад

Fantastic finish gives me confidence to do this at home. Thank you.😊

@Mad4Motors_ 6 лет назад

I was suprised of the finish from a rattle can myself!

@jankindl915 6 лет назад

we will see after one winter :)

@jamesrotunno6911 5 лет назад

Have you done yours yet, if so how is it

@venomycilious 5 лет назад

How was the result? Did you do it?

@charliebarrie9139 2 года назад

I’m very pleased to have come across this video, I have clear coat issues on 90% of my vehicle small areas only luckily, however, I will need to be doing the whole car .video has given me the confidence to buy the materials myself. base coat clear coat masking wet and dry sandpaper the whole lot I still save money. thank you so much.👍

@TheHamouda Год назад

did you do the job? iam willing to do on my car .I have also clear coat issue

@leevww Год назад

ok heres the thing..simple straightforward, minimal talking, no music. top man

@scrappiron6347 4 года назад

Thanks alot brah...I'm going to try this on my van...I definitely will make sure I let the world know I learned this from you...I appreciate you big homie....👏👏👏👏👏🤜🤛🤝🤙✌

@creiggarrett565 3 года назад

Did it turn out good for ya!?

@TheManWithNoName93 3 года назад

@@creiggarrett565 his car blew up when he tryed it, hes no longer with us

@talicrew 3 года назад

I've been putting off doing this on my car for sometime now. But watching this guy makes me go "You can do it! COME ON!" 💪🏼

@Mad4Motors_ 3 года назад

Yeah man go for it 👍

@kafkent6727 3 года назад

Yesterday I removed some vinyl from my Mini Convertible on the A panel....lifting bits of lacquer off....today your video pops up 😁 Great job boss, much appreciated 👍

@anastasiacampbell9165 7 дней назад

Love...love, love his accent!! Great information too!!

@johngoldman5823 4 года назад

I love this guy, save me bunch of money. Thanks for sharing.

@marcusm1766 4 года назад

Damn! That looks amazing man. Good job

@kimothy777 Месяц назад

Exactly what I needed to see right now, thanks a million

@1mansopinion966 3 часа назад

You just gave me the confidence to do this to my 06 bmw. Thank you

@SomeOtherGryph 6 лет назад

I was a little worried at first when you put the base color on because of that orange peel, but it turned out really awesome. Nice work!

@briankennedy5578 6 лет назад

The clear will help hide that. As long as the clear has no orange peal. You see the top shiny layer.

@chriswebb383 6 лет назад

The base coat will lay down

@ThatMoralGuy 5 лет назад

Yea. The base coat is going to put a thin coat over everything, and because gravity happens, the small divots even out.

@kitkat53ftw 5 лет назад

Plus if you buff and polish it it'll really really help

@rwieber79 5 лет назад

Basecoat always looks like that when its wet. As long as it looks right when its dry your ok. If you see orange peel or even worse fish eyes or crow feet then you have to start over because you have contamination under the clear and will have to sand it out and then try again. Also make sure to use wax and grease remover before spraying anything to help avoid those problems in the first place.