No video :(

How to repair fiberglass in your rv

Подписаться 68 тыс.

Просмотров 93 тыс.

50% 1

How to repair fiberglass in your rv. In this video I'll walk you through the steps it takes to repair damage in your fiberglass on your rv or boat.
If you have any questions leave them in the comments below.
Do me a favor and SMASH THE SUBSCRIBE BUTTON it doesn't cost anything and is a great way to support the channel.
I truly hope that you enjoy the video and it helps you with your repair!
Disclaimer as an Amazon Associate I earn a small commission (at no additional cost to you) from qualified purchases. I will not recommend any product that I do not use personally.
Amazon links to products i use:
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
U-Pol 2892 High Solids Urethane (4.4 VOC) High Solids Spot Repair Urethane Clearcoat Kit
amzn.to/311CVTc
Mirka Abrasives Mirlon Total 4.5" X 9" Scuff Pads, Ultra Fine (1500 Grit)
amzn.to/2D6OKiO
Evercoat 125 Rage Ultra Body Filler - 0.8 Gallon
by Evercoat
amzn.to/30ey7uq
Fibre Glass-Evercoat Co 100911 Fiberglass Cloth - 6 oz.
by ITW EVERCOAT
amzn.to/30dl3FB
Bondo Fiberglass Resin, Stage 2, For Repairing, Resurfacing, or Rebuilding Metal, Wood, Fiberglass or Masonry, 115 US Fl oz with 1.48 Fl oz Hardener
by 3M
amzn.to/3gfoPDZ
Be sure to check out my other how to videos on paint and body repair.
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
how to use body filler to repair a dent
• Auto body dent repair ...
How to repair and paint your bumper
• How to save money pain...
How to remove fisheyes from your paint job!
• How to remove fisheyes...
How to save a bad paint job
• How to save a bad pain... isclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@dragonbutt 3 года назад

Been apprenticing in a bodyshop and the main body guy doesnt explain things too well. You did everything he does and actually explained it very clearly! Many thanks.

@dovannim.gaming8570 2 года назад

Me and my Fiancé bought a 2002 Damon Challenger 348 with 30K miles, earlier this year. We gutted the entire rig and found a few leaks throughout. The passenger mirror was leaking and the awning began to punch a small hole in our fiberglass near the upper trim. Up until now, repairing these issues was a job we’ve been tip-toeing around! I don’t know why it took me so long to find your video, but all I can say is THANK YOU! Other videos just didn’t give us what we needed to in order to do this job with confidence. We’ll be tackling this job this week!

@GarageNoise 2 года назад

Great that's what it's all about! appreciate taking the time to comment and thank's for supporting the channel!

@healsinger 3 месяца назад

Somebody on RU-vid really knows what he's doing! I'm researching a delamination project that I'll be doing soon. Yours looks like a very well done stable repair. It looks to me like Bondo is a good product. This was an easy to follow and logical video. Thank you for generously sharing you expertise.

@jrnyrv 3 года назад

Man, I feel pretty confident that I can do that myself now, awesome!

@yyl3683 3 года назад

Love that attention to detail

@GarageNoise 3 года назад

Thank you!

@llott319 3 года назад

Please mention that before anyone who is new to sanding fiberglass that they do what you did and wear preferably a respirator. Not good for lungs to breath in the dust. Also goggles and a long sleeve shirt is good too. Fiberglass is nasty to get in not only skin but mucus membranes and cause tissue damage to lungs. A newbie would not necessarily know this even though you show yourself(or whomever) protected in video, you say nothing about it to the viewers. Not everyone would know this Other than that, thanks for the demo.

@GarageNoise 3 года назад

Yes, I will do that

@lucianosantucci108 2 года назад

Perfectionist - necessary to make it look right

@SolidSnakeSan 3 года назад

This guide helped in a pinch. Thanks for the help!

@GarageNoise 3 года назад

Your welcome, thanks for watching.

@martinrascon1350 2 года назад

Overall good job looks factory

@MAF545 3 года назад

Very helpful Brother!

@bobdhitman 3 года назад

Awesome video

@devonkinsey9085 3 месяца назад

What about where a small piece has completely separated but you have the piece? It’s about 8” long by 6” wide.

@DoctorSmartyPants 3 года назад

You stopped before the painting process. I wanted to see how you match the paint color and finish. I have a brand new rv that is gel coated and has tiny hole in cap from a hail storm. I am extremely concerned about the dealership repair...trusting how it will look in the end. Any suggestions? Thanks for the video, by the way!

@GarageNoise 2 года назад

Ther is another video showing the paint process.

@Rose-yo2du 3 года назад

awesome!

@patbullard9276 3 года назад

How long do you let the resin/fiberglass and the filler dry between coats?

@GarageNoise 3 года назад

Good question, I let it cure fully before a second coat depending on the temp about an hour. Sand with 80 grit before the second coat. If you sand the first coat and it doesn't create dust or seems soft then it's not yet cured.

@chantalle2869 2 года назад

Hi, we just had a bit of an accident with our Prolite trailer. There's a hole about 10 inches long, 3 inches wide and it's right through to the styrofoam. There wasn't much there, as it's an ultralight trailer, but it looks like the layers are Styrofoam, really thin plywood, fiberglass and then a gel coat. My question is, can I just fiberglass up the hole? How would you repair a hole like this?

@GarageNoise 2 года назад

I would use a little fiberglass matting along with resin. Then a little fiberglass filler to finish

@R_Arizona 3 года назад

Awesome...you wanna drive over to queen creek arizona to do a small job? J/K

@markpayne6803 Год назад

Question because I couldn't see in the video,the pieces that were still attached but pushed in did you leave it that way or did you remove them

@GarageNoise Год назад

I ground the loose fiberglass leveled it out as best as possible before applying new fiberglass.

@philipvanbergen3924 4 года назад

Cheers - helped me enormously.

@DanielWilliams-fp4oz 3 года назад

So is the RV painted originally, or gelcoated? Is the resin you use epoxy or polyester based?

@GarageNoise 3 года назад

I used fiberglass resin. I used automotive clearcoat for the top coat. Polyester base resin

@DanielWilliams-fp4oz 3 года назад

@@GarageNoise So you used polyester resin. You sanded the surrounding area rough so that the resin-soaked-mat would stick to it. But the surrounding area still had white color (paint?) on it. What I am wondering is if that original white is paint, or gel coat. I want to know if I need to clean the paint off down to the raw fiberglass before glassing to it.

@GarageNoise 3 года назад

No, you don't need to remove th surrounding paint as long as it's not damaged. Rough up the area around the damage with 80 grit sandpaper or something coarser. I use 80 grit. Its coarse enough to allow the resin and matting to adhere properly.