HOW TO REPAIR REBUILD STARTER BRUSH SAVE MONEY HONDA ACCORD CIVIC CR-V ELEMENT INSIGHT ACUR TSX RSXA 

You did a BETTER JOB explaining it without saying a WORD!!!!😮😮🎉🎉🎉❤❤❤

Follow this guys directions and you can't go wrong. NOTHING needed to be said, this was perfect. All I would add is that anyone trying to power the starter the same way, just ground the starter as he did and same for the positive cable. You can use a wire with alligator clips between the solenoid and the positive cable. Just tap the solenoid connection with one of the alligator clips to activate.

The brushes are soldered in so he would have replaced the assembly. However the most common part to go in these is that copper L plate that is bolted to the main positive bolt. This is one of the contact plates for 12v coming in to the motor. I shall post something on it. But by and large he has covered the dismantling of it well.

thanks for taking one apart for a 1.8 civic and recording it for us to watch, pretty sure the brushes wear down and fail to contact the armature fully once warmed, disassembly would be necessary but a brush kit and plunger kit from honda would be less than 60 bucks and made in japan and these things are a hassle to replace since on the 1.8l civic they are under the intake on the rear of the engine.

I totally had to rewatch the video because once I realized he's holding it with his feet that was all I payed attention to. True gangsta!

me sirvió de mucho el video,yo mismo repare mi motor de arranque,excelente

1. Yes, he uses his feet as a vice. God only knows how he's holding the camera. ;) lol 2. He's demonstrating how to take apart and rebuild a starter. Given the choice of doing a demo with a new, clean starter, and doing it with an old dirty carbon-filled starter that requires it, I think he chose wisely. Especially with the feet involved! 3. He's selling the brush holder replacements at leeautoelectric.com, as posted in the description. I imagine he grabbed a new starter off the shelf to do the demo. If they/he's not a working mechanic, it would be silly to ask around the neighborhood for the appropriate car to demo the part replacement. He's doing this for people who buy the part. Of course!

Very nice video! You show all he details and don't even need to talk.

Excellent video. My CR-V starts when cold, but after driving and it heats up, if I turn it off to go into a business or anyplace, when I get back in car and try to start, it won't start, and I have to wait at least an hour and a half to give it time to cool down and then it will start. Honda dealership wants insane money for a REMANUFACTURED one! This looks like just what I need. Thanks very much.

I love silent videos and foot vices you rock bro aloha if the starter in anyone's CRV is working intermittently it's in an easy location to bang on that will get you through usually until you service or buy a new one

Bro, you rock, get the job done with minimal tool

Easy starter to work on..great video no talk.hehehehe👌🤣

+1 for monkey vise innovation- feet rule! Thank you for the visual exploration/guide Early starter solenoid contact failure fix FYI- Genuine Honda Brush Holder Set = P/N 31210-5A2-A01 about $28 Honda wants $950 to replace my starter.. not the path I shall take.

did you replace the brush in the video or just show how to assemble the starter?

Exelente demostración,más fácil no puede ser

Was it old/new starter? You took it apart and put it back together

Exelent vidio woow nice

Thank you brother

Great video, what are the chances of plunger malfunction, have you had any starters with that issue?

You are the best !

This is awesome because starters cost 279.00 for new and 135.00 for rebuilt .

Por que no desarmas el bendix??? O acaso no se puede?

question, is the shaft with teeth that turns the flywheel, is it supposed to be free to turn by hand in any direction, just in one direction and stiff to the other, or unable to be turned by hand in any direction ?

I watched the video twice but I couldn't point to what exactly you changed/fixed. It appears that you just opened it and put it back together! What am I missing?

Se deberia mostrar como se saca el vendix

good

connections?

Brush springs should had been removed before replacing the armature, this will prevent damage to the contact brushes.

So I took the starter off my 2014 Accord sport and I saw black “dust” all inside. Would this part still be able to fix my starter or better off getting a new one?

How does the bendix gear/shaft ass'y come out?

Hi, which part# would be the correct one for a Accord EX 2014?

What is the brush kit model number?

Would have been nice if you talked thru the video

cach lam qua au

What grease do you use to repack the gear set after cleaning out all the carbon grit?

the bendix repair?

Quite a feet!

Esf4

Hi there thank u sr you save me $300.00us

Hi. Yes you are & please search this part # 69852001 in our web you will see it thank your contact us.

It looks too clean ...

Helpful, but it would be more helpful if he used his words.

Where can I buy the rebuild kit?

he didn't fix anything took it apart and got it all back together there was knofind

You left out the most important part of rebuilding a starter, replacing the carbon brushes, all you did was disassembled it and put it back together.

Did this guy use his feet to overhaul the starter? 💩

trial & error, looks like to me