How to Replace a Ball Joint (in depth, ultimate guide)

Подписаться 10 млн

Просмотров 2 млн

50% 1

Replacing a Lower Control Arm Ball Joint. Learn how to replace a lower ball joint by pressing it out of the control arm and pressing the new one back in. To watch the longer, in depth version, click the link below.
Replace a ball joint (short, fast version): • How to Replace a Lower...
Here is where to get the ball joint press: www.amazon.com/gp/product/B002...
Torque Wrench I use: amzn.to/1N65Maz
Socket Set I use: amzn.to/1BlL0Tj
Ball Joints: amzn.to/2qEOOhc
How to check your ball joints to see if they are bad: • How to Check if a Ball...
In-Depth Version: • How to Replace a Ball ...
Upper Control Arm Replacement: • How to Replace a Contr...
How To Press a Ball Joint: • How to Press a Ball Joint
How to Change a Wheel Bearing: • How to Change a Wheel ...
Torque Specs are for my 2001 Mazda B3000
(each make and model will have different torque specs so check your service manual for proper torque specs.)
-Lower Ball Joint
83-113 ft-lbs and tighten to the next slot for the cotter pin (don't back the nut off)
-Upper Control Arm Ball Joint
35-46ft-lbs
-Caliper Bracket Bolts
85ft-lbs
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: ru-vid.com_c...
-RU-vid Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Авто/Мото

Опубликовано:

28 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,1 тыс.

@bobbyshah5743 7 лет назад

This guy is the best instructor for car stuff on YT period....

@chrisfix 7 лет назад

+Bobby Shah thanks Bobby!

@michaelfoster5475 7 лет назад

Bobby Shah he really is, I've been watching his videos non stop.. who ever dislikes his videos are idiots.

@normanbuchanan9710 7 лет назад

Bobby Shah the best bar none

@KM5347 7 лет назад

The ones who dislike 1. Jealous mechanics who lack the charisma, dedication, and hard work to make a channel like this 2. Selfish mechanics who have a hard time simplifying or even sharing this knowledge with the general public 3. Competing RU-vid mechanics who can't do it like Chris 4. People who use a different brand of threadlock or ratchet set 5. People mad Chris doesn't have boobs to look at

@jnambo5500 7 лет назад

KM5347 okay calm down!

@jonerikgreene1175 5 лет назад

Did lower ball joints, both inner and outer tie rods, and upper control arms today.... it’s a lot easier to watch the videos than do the work! I couldn’t have done it with the confidence I had (which got me through some rough patches) if not for your videos. So, again, a BIG THANK YOU.

@cyrusIIIII 5 месяцев назад

You are saving thousands of dollars man.

@GreyStreet14 Год назад

Absolutely did the same exact thing Chris did and I had so much confidence! Chris' videos being free is a crime!

@Chris3836 9 лет назад

Thanks for using regular tools, they give me confidence knowing that an average guy like me can do this with simple hand tools. Much appreciated. :)

@shag377 8 лет назад

This video saved me over 500.00 in labor. My cousin had the tools, including the press, for me to do this. Thanks for taking the time to make this.

@TechCrazy 2 года назад

You could also rent those tools from a local auto shop.

@niktarasyuk8514 Год назад

Simply the best instructional videos... the visibility, the clarity, the pace... everything is simply spot on, no fluff, absolute top of professionalism. Unreal work, thanks Chris

@GeoJockey Год назад

ChrisFix repair videos are the BEST...! Attention to detail, no cussing and very well done. Bravo!

@chrisfix Год назад

Thank you

@chrisfix Год назад

Thank you

@chrisfix Год назад

Thank you

@leorahim6268 4 года назад

Learned so much from Chris's channel. Defiantly the best instructor on You Tube.

@chrisfix 4 года назад

I'm glad you are learning a lot!

@takeadayofff 7 лет назад

8:48 turn the C-clamp upside down to install it easier. Remeber, it's a system with 2 opposing pressure points, so the force upon them is identical no matter which way the C-clamp is pointed. 9:38 the sharp edge of the snapring should be pointed down so if the press fitting looses tension from extreme use, the snap ring will bind in the groove and help prevent separation. 9:44 tap around the snapring with a flat blade punch and a small hammer to make absolutely sure it is fully seated in the groove. Probably best to install the grease zerk last so u don't damage it during CV/knuckle maneuvering.

@adamskead8859 5 лет назад

Shhh it doesn't matter how it's done as long as it's done

@scottdonahue9193 3 месяца назад

I looked through the comments to find this.... I'm not being a critic, because he did a good job, but I did notice two out of three of these

@Zooumberg 7 лет назад

Chris, I'm loving your videos. Thank you for taking the time to upload them. And of course educating us at the same time. We're all much appreciated by your kindness.

@JohnnyGutierrez-um6nt 2 месяца назад

It’s so crazy he has like 25 likes on this I swear this is the best video I seen all damb year on a very complicated repair he simplifies so well ❤❤❤

@chrismartin9084 8 месяцев назад

Man I am so glad I found your channel I literally knew nothing about cars or how to fix them but the way you break stuff down it makes it sound simple enough for average people with no proper training to do it themselves and save hundreds if not thousands. I recently just changed a tie rod and ball joint on my 2017 Nissan rogue all from your videos!

@cassiusclaynyc 10 лет назад

first video of yours I've seen and I am very impressed with not only your knowledge but the perfect clarity that you explain in. Not everyone can do this! I've been to 2 years of Automotive vocational school and was a light wheel mechanic in the Army. I learned a ton of new stuff. Keep em coming bro. Much appreciated.

@chrisfix 10 лет назад

cassiusclaynyc Thanks a lot man! And thanks for your service! I am glad my videos are clear and helpful, that is a goal of mine! Stay safe and keep learning as much as you can!

@alexjones8141 9 лет назад

Your videos and descriptions are EXCELLENT! You explain things in simple terms and show that a person doesn't always need special tools to do the job. And the fact you provide helpful links.

@chrisfix 9 лет назад

+Brian Ramuno, I cannot reply to your comment for some reason but I hope you see this. I dont know what springs you need to compress. You are not taking the control arm off, you are just moving the knuckle out of the way. I will have a new video next Thursday working on another car to show you the similarities and difference in removing the ball joint and pressing in a new one. If you watch the video, that is what you need to do to press out a ball joint.

@mitchtalmadge 3 месяца назад

Thanks for the video Chris. Btw your description says "To watch the longer, in depth version, click the link below." but I think you meant the short, fast version.

@adamschatz7718 9 лет назад

Hey Chris, I really, really appreciate your videos .. I find them to be the best DIY home auto repair videos out there, and you've saved me hundreds of dollars. Very much appreciated.

@waterboy8999 8 лет назад

Great video sir, no crap, and no music, thanks.

@chrisfix 8 лет назад

+David Punton Thanks! Glad the video was helpful!

@CaseyChambliss 7 лет назад

Your videos are so useful! Thank you!! Your attention to detail, editing, clear sound and shots are appreciated. Thank you for taking the time to edit these and making them high quality. Bonus points for showing how to do this with hand tools and stuff you can borrow from a parts store.

@bradforddrake8633 Год назад

Fabulous video! Now I have the confidence to "do-it-yourself" and save big $$$! Thank you Chris!

@dustingriffith7415 6 лет назад

Chris Fix is a great RU-vid instructor. His voice is so soothing and makes me feel like I can accomplish any auto repair I need. Plus you never see his face, which gives him a certain allure.

@dirtydan9032 5 лет назад

I love how you do everything with hand tools!! Great videos man keep it up

@rochelleanderson882 7 лет назад

Omg I'm so beyond excited to have found this from you! All four upper and lower ball joints are bad in my SUV and I have been told that'll be well over a grand maybe even a couple grand fix. I was looking all over the Internet for info on how to do this at home and came up pretty much empty handed. All your videos are so detailed and easy to follow even for people who have no car knowledge. I feel confident I can order the parts and do this. Thanks so much! Btw I can't believe you haven't found sponsorship. Someone should pick you up soon.

@tomasgaspar8065 6 лет назад

Rochelle Anderson a woman that can replace ball joints? This i have to see

@pxndxlunx5821 5 лет назад

How did it go?

@xxmuadxdibxxable 5 лет назад

tomas gaspar you are a certified duesche nozzle. Let’s see if you can clean your nutsack with out your mother helping. Now this I gotta see.

@bagginn 4 года назад

SoLID SiC haha

@riley633 9 лет назад

Hats off to you ChrisFix!!! I like referring to your videos all the time, You go thru these videos step-by-step for the ordinary people who doesn't have all of the special tools on hand. You are down to earth my man. Thanks again...

@chrisfix 9 лет назад

riley633 Thanks man! I am glad my videos have been helping! That is the idea, easy to follow, step by step, concise, and educational how to videos using common tools! New automotive 'how to' videos every Thursday and most Mondays!

@codyq0987 10 лет назад

Now I am a big fan of your video. 1> you detail all the steps 2> you show where the tool is come from 3> you indicate safty issues 4> you use simply tool. Great show. Thank you

@chrisfix 10 лет назад

Great! That is how I make all of my how to videos. Glad you enjoyed it! Remember to give the video a "thumbs up"!

@dcanon 10 лет назад

Wow, very detailed and informative. Erictheguy should be worried. Love that you film every angle/shot and with proper lighting. Do you have someone holding the camera? I don't even hear any traffic - just birds chirping. I hope you're sponsored because you're good at what you do. Keep up the great work!!

@chrisfix 10 лет назад

Haha, thanks a lot man! I do everything myself. I use a tripod and many times I wish I had a 3rd arm. I edit all of the traffic out and as much of the other noise (birds, planes, buses, etc) out as well. I am currently looking for sponsorships but no luck yet. Thanks for the awesome feedback! I really appreciate it! It makes making these how to videos worth the effort!

@jameslogan3383 7 лет назад

Would you do the upper and lower ball joints on the Nissan pathfinder 2007-2009? Also lifts on the struts

@sz4179 6 лет назад

Hi ChrisFix, Can't believe you don't have sponsors beating down your door to attach themselves to your top notch you-tubes.. Thank you so much for great gift of free instruction and advice on car repairs, I couldn't do it without you and a couple other of the great generous you-tube mechanics. and the factory service manual. .. I have watched a lot of your auto-repair videos and never seen you do any Hack thing on them, always professional, the best! Whoever you learned from was stellar. Thanks for the inspiration to do it right, too! Nicole

@earlkoropatnick1928 10 лет назад

Love your video's you describe everything even simple things like shaking the truck to ensure a stable lift. Please keep it up!! Thank you!

@chrisfix 10 лет назад

Thanks! I try to keep it simple yet provide the maximum amount of detail to make the job safe and easy!

@patricklogston4031 4 года назад

I appreciate you taking the time to do these videos! Really helps me keep my 99 Suburban maintained and running good and safe for my family! Thank you sir!

@jaykay6897 Год назад

Excellent video!!!! Clear concise, excellent videography and editing along with to the point commentary instructions with no ums and ahhhs and wasted unnecessary silent gaps. Super well rehearsed and scripted. Well done!!!

@chrisfix Год назад

Glad it was helpful!

@haroldbaptiste4749 10 лет назад

Great job. Keep up with those vids been learning alot and taking the time and patients to do it myself.

@chrisfix 10 лет назад

Thanks man! I am glad you are learning a lot from the videos! That is my goal!

@SalandFindles 6 лет назад

+Harold Baptise Patience**

@kalemercer7053 4 года назад

I spent 2 years of my life in a E-coat paint factory watching, loading, and unloading parts on the line. I thing i see a few of them here too.

@AZTECHSOUL213 4 года назад

What a great instructional video! clear sound, editing, picture, and lighting. You are awesome, bro! keep up the good work.

@kirkhepburnmiddleagedwhiteguy 6 лет назад

Best video I've seen on the subject. The lighting, camera angles, and direct narrative explanation are excellent. Thank you for taking the time to post.

@imjabroni1 6 лет назад

Thanks for the info in your videos, and for the CONFIDENCE to attempt this job. I did both upper ball joints, sway bar end links and tie rod ends on my '06 Ram 1500. The satisfaction of doing it myself makes the hundreds of dollars I saved worth even more to me.

@chrisfix 6 лет назад

That's awesome! Nice work and I am glad the video was helpful!

@andrameda1 9 лет назад

Very helpful thank you Chris!

@MrGeno1951 9 лет назад

This video has renewed my mechanical instinct and confidence. Thank you, ChrisFix: you are an exceptionally gifted teacher.

@chrisfix 9 лет назад

MrGeno1951 Awesome! That is what I like to hear! Glad the video was helpful! Definitely consider subscribing! New automotive 'how to' videos every Thursday and most Mondays!

@elijahvertsehovski7020 2 месяца назад

And this is where it all starts from. So many years, Chris. Almost showed your face lol Good job buddy!

@1947froggy 9 лет назад

Nice video, great details. :)

@chrisfix 9 лет назад

froggy New automotive 'how to' videos every Thursday and most Mondays!

@1947froggy 9 лет назад

I'm subscribed, my channel is Froggy's Garage. :)

@chrisfix 10 лет назад

WV591 I get my torque specs from my service manual. But you can also just google your car year, make and model and what part you are looking for. And finally, your parts store should know the correct specs as well!

@rokin89 9 лет назад

if you take the word from someone at a part store ,usually means 4 trips back to the part store do to wrong parts

@chrisfix 9 лет назад

rokin89 A lot of times they might be able to pull up the torque specs on the computer. You just need to make sure they put the correct year, make, and model lol

@colemanadamson5943 8 лет назад

+rokin89 Exactly my point in my comment today (9 months after yours). This video can hurt someone.

@alexlava8195 7 лет назад

Coleman Adamson

@TheHamadanners 7 лет назад

awsome

@RESTORATIONRESCUE 4 года назад

This is an awesome video. I am just seeing this and it is awesome to see how far you have come to where you are now. Plus it makes me feel better that you started with the same type of tools as I have now and gives me things to look forward to.

@bhumane8642 3 года назад

The amount of time you spend on everything. Including editing blows my mind. Thank you for your videos, you do an excellent job teaching. Not too fast not too slow!

@XxSNiBZxX 5 лет назад

7:21 zmm zmm

@moquadri08 9 лет назад

hay chris thank you are very perfect explain good job .you guys makeing job easyer .

@chrisfix 9 лет назад

Mohiuddin Quadri Thanks! I am glad the video was helpful!

@luphinus 5 лет назад

Great instructional video! Clear, concise, and you take into consideration that not everyone has every specialty tool.

@philipadcock3508 3 месяца назад

@chrisfix 9 years ago bro. 9 years.. I hope RU-vid has paid you well. You made a smart decision making these videos as a young guy. I’ve been watching for a while now.

@alphaomegaello 8 лет назад

I see you got moog parts, I always buy moog for my suspension parts. always reliable

@chrisfix 8 лет назад

Yea they are pretty good!!!

@bryankenwood3025 3 года назад

So you would know how much moog upper control arm n ball joint would cost, can you share that?

@MoparGuy1625 3 года назад

@@bryankenwood3025 or google it....

@bryankenwood3025 3 года назад

@@MoparGuy1625 I bought the moog upper control arms (2) n lower ball joints $250. Just got to find the time to install them.

@WV591 10 лет назад

where did you get the list of torque for this project? THX

@kevinhughesIT 4 года назад

I love your videos. I've learned so much from them. I'm new to fixing cars and these videos help so much. Thank you.

@ng1400 Год назад

I know very little about vehicle repair/maintenance but I somehow ended up here after typing "how do ignition coils work" in the search bar. Awesome, video mate!! Very clear and concise for rookies like me. I just subscribed and will work through your videos in the coming weeks. Cheers for all the work you put into your videos.

@johnralston5818 5 лет назад

... Thanks Chris.. i know i can count on a video from you to refresh my old 73 y.o. mind on car maintenance. ( ... been a while tween ball joint replacement ; )... so Thanks Again & i'll see ya down the road.

@tammykeyser1254 7 лет назад

Chris Fix! Man you just saved us a crap load of headaches! Your indepth videos really helped my son save about $700 from shops. We really appreciate everything you do. Keep up the excellent work!

@andrewhoskinson1487 7 лет назад

Well that's one of the best instructions video I've come across yet! No B.S no music just great direction. Good on you

@Pendaws 7 лет назад

You sure do explain things well. There are many people who find it difficult to understand workshop manuals and your videos are very useful. It's a pity in Australia, you can't rent that removing tool for free. :(

@greenlungz 9 лет назад

Honestly man, you did just as great of a job on the video as you did on the tutorial. You speak clearly and loud enough, there's no background noise, and it's very thorough. Very nice man, very nice!

@chrisfix 9 лет назад

greenlungz Thanks for the feedback man! I am glad the video was helpful!

@editrento1 5 лет назад

Great videos. Bravo on editing and plain speak tutorials 👏. It’s nice to see some one who knows what their doing.

@braydnwensloff6197 6 лет назад

Chris... u are the best diy mechanic out there. U make everything so clear and it is just amazing what u have taught me. I wouldn't be able to change a tire if it wasn't for u. Keep up the good work man!

@dariushfarhand4872 7 лет назад

This is fantastic and thank you for all the work you do to educate people and all the tips!

@shaneluthy3041 3 года назад

The only thing that's changed in the last 6 years is the pace and tone in which ChrisFix talks. The quality is still 10/10, even for the early stuff like this. Doing it right the first time, every time.

@rsscarr 8 лет назад

God you are informative. You really need your own show or something. You are very good at making things out as simply as possible. Keep up the awesome work man

@MTL514rosemontrep 9 лет назад

Chris I love all your videos man! You're a truly great teacher, I just want to say thanks for sharing!

@chrisfix 9 лет назад

pachanized Thanks a lot! I am glad you are learning a lot!

@liraziyad5806 6 лет назад

ChrisFix! I am soo mad at you! You make is all look so darn easy all the time! I am sitting here breaking my finger nails, getting my hair snagged and yanked out and fighting stupid bolts that NEVER want to come out! Pulling out my Oxy torch to loosen stuff and rolling around in the dirt... That being said, I thank you for taking the time to make your videos so fast and to the point so that when I get stuck, I can fix it myself! Thanks for your videos...

@resellerrunner5149 3 года назад

Thanks for making these videos Chris! I have more knowledge AND confidence to replace my lower ball joints on my 98 S10 now.

@goonitunezperformance3155 2 года назад

I find it crazy that i watched this channel for years and now i own a 04 Ford Edge which is basically identical to his truck💯😂

@davebonnie4 9 лет назад

Hello Chris, I'm done. First one took 3 hours, second one was 55 minutes. The solution I used for the stuck tapered ball joint was an old gear puller, penetrating oil, and two 5 second blasts of electronic parts cleaner and lube,(much like Freon,gets real cold). Waited about two minutes and it popped out on its own. Just got it all aligned and tires rotated. Thanks again for the great! video.Your camera work, editing,and syntax really pull it all together, You saved me a boat load of funds. Dave

@chrisfix 9 лет назад

davebonnie4 Glad the videos were helpful Dave! Thanks for letting me know how it went! See how much faster it is when you do it a second time! Nice work!

@toxic1venom 4 года назад

You're the best sir. I just purchased a ball joint press through your amazon link. I hope you get a little kickback or something from it to help support your channel. Keep up the great work. From Arkansas

@Cys62 7 лет назад

enjoy all your videos... your explanations are very easy to understand and especially you are so energized in giving the explanation....

@CptnCobblestone 8 лет назад

All of those steps for one ball joint? No wonder why they charge you a lot to repair!I'm glad you showed me cause as much work as it is, it'll save me money.Thank you!

@chrisfix 8 лет назад

No problem! It is not that bad once you do one! The other side goes a lot faster!

@OldTimeReligion1611 4 года назад

What clear, concise instructions! I have just subscribed and will recommend to friends! Thanks so much!

@chrisfix 4 года назад

Welcome aboard! And thanks for sharing!

@keyg3n_ Год назад

cv axle blew out on the cr-v, figured id replace the lower ball joint as well so this video comes in handy bro! thanks for all the great content thru the years

@alexjones8141 9 лет назад

Thank you! Please continue doing these types of videos.

@Cos127 6 лет назад

Thanks for all your videos ChrisFix! I was able to change out the lower ball joints on my 2007 Ford Ranger because of the help from this video. You Da Man!

@scottketchum2224 6 лет назад

Thank you Chris Fix, your demonstration helped me change my lower ball joint. I'm a diy guy and I've never changed one before and your video saved me a lot of $$$$ 🤣thanks again.

@jackrpool 8 лет назад

To the point and super clear, thanks for posting this tutorial. Can't wait to tackle this with confidence. Cheers

@kvillaceran 2 года назад

See. Dede tee e e exxdexddexdddx wedded edsxdxdddeeddddedddd

@sergeantinfantrymen1468 3 года назад

This guy has saved Americans collectively probably millions, without doubt. Amazing channel 🔥🔥🔥🔥🔥

@zechthompson7688 4 года назад

It’s a damn good thing your Mazda is basically the same thing as my 99 Ford Ranger! This will pretty much give me the exact specs I need to do the job. Thank you Chris!

@chrisfix 4 года назад

Awesome!

@pave505676 9 лет назад

Chris, fantastic video. After watching I feel very confident on doing the job myself. Not only are you very thorough, you offer great tips. Keep up the great camera work and thanks for the video.

@chrisfix 9 лет назад

pave505676 Thanks man! I am glad the video was helpful! New automotive 'how to' videos every Thursday and most Mondays so stay tuned!

@davidtoro376 5 лет назад

All I have to say is: just great!!!!!! Keep the wonderful job you perform.

@8BloodyKnuckles 6 лет назад

Zzzooom zzoom! Love the sound effects man. Lol. You truly have the best how to videos and it’s awesome that you use basic tools to show that you don’t need a $500 impact and such. Thank you for all you do man. As a father of 5 money is scarce so I appreciate seeing that I can do this with what I have

@mariannerollins6144 2 года назад

Woman also appreciate your videos because we google stuff that mechanics say our vehicles need fixin. This way we have a good idea what they are talking about. Thnkyou

@JUKE179r 6 лет назад

Thanks for this in-depth video! I'm going to tackle mine this weekend on my 2001 Land Rover Discovery. Cheers mate!

@lenchast 9 лет назад

One of the best and most informative videos I have ever watched. Always keep safety in mind and continue your good work.

@chrisfix 9 лет назад

lenchast Thanks a lot man! I appreciate it and I am glad the video was helpful!

@eldinpeterson3760 Год назад

just came across this you did a great job explaining what to do, hope you helped out people who need a little help .

@riclacrl 10 лет назад

This video was very helpful for me. I am also planning on replacing all four of my ball joints on my avalanche. Thank you for posting.

@chrisfix 10 лет назад

Great! Glad the video was helpful! Let me know how it goes! Also, remember to give the video a "thumbs up" (it helps me out, thanks)!

@riclacrl 10 лет назад

Already gave the thumbs up!

@reznha 5 лет назад

perfect as always chris, nice job. i will do it tomorrow thanks for your video

@DarkscytheHD 6 лет назад

Hands down the best lad on Ytube for car enthusiasts!! Learned so much from this lad, gave me confidence to start doing stuff myself! and im loving it

@chrisfix 6 лет назад

+DarkscytheHD thanks! Glad the video was helpful!

@jardo531 9 лет назад

This video was a great help to me when I replaced the ball joints on my trailblazer for the first time. Thanks for posting.

@chrisfix 8 лет назад

jardo531 AWESOME! Glad the video was helpful!

@ernestoramoscruz73 3 года назад

I really like the way you explain every step of the process...you are a natural teacher...keep going...👍👍👍

@sikavac1 9 лет назад

Exceptionally clear instructions, with all important tips & torque values. Video well lit.

@chrisfix 9 лет назад

S. Pavlovic Thanks a lot! Glad the video was helpful and clear!

@franci8766 3 года назад

Thanks for the step by step using tools any ordinary car owner may have in their garage. Looking forward to replacing 30 year old ball joints in my old pick up.

@OscarGomez-bm3wh 8 лет назад

IMO this is an excellent video; informative, perfectly shot and edited. I am not an auto mechanic but this video helped me understand the process. Being informed helps us, the regular citizens, to pay the fair price for this and, in general, just about any other repair (auto, home, personal services, etc.). My auto mechanic is an honest and well trained individual but it never hurts to remind him I already know what he is going to do. Thank you.

@chrisfix 8 лет назад

+Oscar Gomez Thanks a lot! I am glad the video was helpful and informational!

@colemanadamson5943 8 лет назад

+Oscar Gomez You're not an auto mechanic. Exactly. Therefore your opinion of this video is based merely on presentation, not accuracy. Don't try to show up your professional and honest mechanic. He will merely shake his head and laugh at you when you leave. UGH!

@lucasmccann1 8 лет назад

Great video, awesome editing with various angles to show what's going on. well done!

@chrisfix 8 лет назад

+Lucas Callahan Thanks! Glad the video was helpful!

@acwither 6 лет назад

Failed my car inspection. Used this video and (another one of your videos) to repair it myself! Thanks man

@chrisfix 6 лет назад

Awesome! Glad the videos are helpful!

@andrestrose8878 9 лет назад

Well done ChrisFix, I am now ready to replace my ball joint. Keep up the good work, thanks.

@chrisfix 9 лет назад

andre st rose Awesome! That is why I make these videos!

@HeavyInHawaii 10 месяцев назад

The ball joint press can be used screw side up to press the new ball joints in so you can use an impact drill on it. Great video, I have loved all of your content over the years.

@UccelloLibero86 Год назад

So grateful for all of your videos

@cameronmay843 4 года назад

Been watching sense your a few hundred subs. U blew up big time! 💪🏿

@inaznmismail2071 2 года назад

Just awesome .... Thanks man for all the valuable information and techniques you provides in your clips...you give the confidence for the average guy to take care of his vehicle. May Allah bless you more.

@barryc.768 7 лет назад

Great job on this Video..getting ready to do my H3 Hummer... garage wants $325...to do this...includes Ball joint and Alignment. But not paying this outrageous price, your vid decided this for me ;) Thanks for this in depth vid my man..you are a God send.

@therealchayd 7 лет назад

Great and very informative video, thanks! One small thing; when loosening the hub nut, to avoid possibility of wheel bearing damage, it's a good idea to partially lift the car so you've still some friction to counter undoing the nut, but most of the load isn't on the bearing. This was from a VAG workshop manual. Don't know if it applies to other manufacturers. Just something to be aware of. I think it also may only apply to non-driven stub-axle types, don't remember 100%.

@lanmedia707 9 лет назад

Good job Mr. ChrisFix, Appreciated Your time and efforts. You're easy to follow and very descriptive and your video's are super focused, thats priceless, many thanks and a ThumbsUp to you..

@chrisfix 9 лет назад

Tom Lancaster Thanks a lot Tom! I am glad my videos are helpful and you like them! Definitely consider subscribing! New automotive "how to" videos every Thursday and most Mondays!

@Roger_That_UAV_Az 9 лет назад

Great video, I used this for my 2000 Cadillac Escalade 4x4. THANK You once again. You have saved this computer geek a lot of money over the last couple of years. -rog AZ :)

@chrisfix 9 лет назад

Rog Hyles Awesome! Glad the video was helpful and you were able to fix your Cadillac ball joints!