No video :(

How To Replace A Blower Motor On A Trane XL80 Furnace

Подписаться 304 тыс.

Просмотров 24 тыс.

50% 1

#1 Source for HVAC equipment: hvacdirect.com
Use my discount code 1MJTDLG4GM70 for an extra 3% off!
All my favorite HVAC tools: www.amazon.com...
Join our channel membership and gain access to exclusive HVAC training videos AND automatically be entered for our monthly giveaways!! They are valued anywhere between $500-$2000!
Join here: / @diyhvacguy
IF YOU ARE IN NEED OF ONE ON ONE GUIDANCE WITH YOUR HVAC SYSTEM, whether it is diagnosing a bad part, replacing your system, or help with sizing, check out our membership program here: / diyhvacguy
For a low price of $200, you will get assistance from myself when it comes to your hvac needs, whether it's sizing, diagnosing, or locating the correct equipment.
Here Is Where I Order All My Air Filters:
filterbuy.com/...
Follow us for more diy hvac tips & to enter for our giveaways!
Instagram: / diy_hvac_guy
Tiktok: www.tiktok.com...
Facebook: / selfmadehvac
⚠️ Disclaimer:
This video is for educational purposes. Any and all HVAC repair work is done at your own risk. Any person attempting to deal with any type of refrigerant MUST have their EPA 608 certificate. The DIY HVAC Guy channel is not responsible for any possible damages or injuries caused by the use or misuse of the provided information.
The DIY HVAC GUY is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Опубликовано:

24 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@orangetuono38 Месяц назад

You covered EXACTLY what I needed when I need it. I was stuck on motor/blower swap and you showed exactly how to gently swap the motor into the captive blower fan setup. THANKS!

@jeffreymoore4132 Год назад

Thank you so much for talking the time to make this vid, My blower just went out and this was an excellent walk through.

@user-ek2gu1kg2j 22 дня назад

I used this to remove the fan so I could clean it. The motor was practically sealed with dust, so I cleaned that too. It hasn't been cleaned since it was installed 23 years ago. You can feel the difference, especially upstairs

@terencescott3957 Месяц назад

Getting ready to do this in just a minute. I'm not a HVAC person but this will be my second time replacing a blower in 11 years. Hopefully it will be easier this time around since I have a "little" more knowledge than back then.

@eddiee2371 5 месяцев назад

Pretty funny that just before you said it, i said to myself, "this is way harder than it should be", except I added in, "i'm sure it's by design". Great video. Thanks for making it.

@WmCRobison 7 месяцев назад

I have an XR80, and think the fan motor is getting weak. Thank you for showing how easy it is to diagnose and replace.

@marcoperez4712 Год назад

Great video, I'm going to tackle this job myself on my Trane furnace, after I got the blower diagnosed as bad after they ran power to it and motor was a no go. The motherboard was working fine.. They quoted me $1905 for parts and labor, plus the $95 for the service call. I declined, the oem trane motor for my furnace is about 1k new with the module included. I couldn't justify paying $900 for labor and motor mark up on a 1.5 hr at most job. Thanks for the helpful video

@diyhvacguy Год назад

It’s not brain surgery, I have faith you can do it no problem 👍🏼

@marcoperez4712 Год назад

Update, thanks for your very helpful video, tackled the job myself this morning and all went well. I have my furnace up and running again, so long Jack Frost.

@fuse98 Год назад

Awesome video man. Very raw and real informative. Hopefully that customer will use you again in the future or at the very least spread your name around for good work.

@terencescott3957 Месяц назад

Thanks, very informative video.

@renehasp 11 месяцев назад

This video saved me 100's of dollars!!! Thank you so so so much!!!

@diyhvacguy 11 месяцев назад

You are super welcome!!

@tommylzllzz4295 Год назад

Man you are very good I learn from you a lot thank you so much🙏👏🙏🙏

@diyhvacguy Год назад

Happy to hear that! Thanks for watching l! Make sure and subscribe to our channel for more hvac tips and tricks! Cheers

@meechgates4824 9 месяцев назад

Thanks for the video. Looking to replace blower motor on my own once it’s comes. Motor was $1200 I’d rather do it myself lol

@eddiee2371 5 месяцев назад

Thanks!

@tommylzllzz4295 Год назад

Too bad you don’t live in Denver I will ask you to install my AC 😂😂😂 thanks man🙏🙏🙏

@diyhvacguy Год назад

Haha I’d love to help you out! Thanks for watching!

@kinglions23 7 месяцев назад

What size are the 3 screws that attach the belly band mount to the side of the blower cage

@Nonsense62365 Год назад

Great Job! I'm impressed young dude! about 23?

@diyhvacguy Год назад

I wish haha I’m 31

@beaglemice4585 Год назад

Many thanks for your video. I am working on to replace my blower motor for Trane XV80 Model number is: TDD120R9V5F4. My question is: How could I get OEM replacement blower motor? I couldn't find this model online. Thanks

@kristenleah6943 Год назад

Hello! My motor is broken on my trane xl 80. Where did you find the replacement?

@rodgraff1782 Год назад

That motor mount looks antiquated for that furnace. Never seen that type of mount on a furnace that looks fairly new. It’s a total different color. It’s usually a belly band. The resilient mounts are usually used in a cradle mount situation. I don’t think that is the original setup. Motor sounded like it strained starting up. Did you leave the old capacitor in? Maybe you have the wrong capacitor. Did you check the amp draw on the new motor? That motor sounds like the 32 year old motor in my 1990 carrier.

@diyhvacguy Год назад

It was a new capacitor that came with the motor, correct size. Sounded fine to me.

@stevem9369 Год назад

Sorry for this. Probably get it all the time. I have a trane xl80. Model tdd080r936f4. And I think my blower went out. But I have no idea on what model number the blower is. I've looked but cant get a definitive answer. Furnace kicks on. Can hear the heat going. But when it's time to push. No air. And I'm no electrician. So im afraid to get that deep into it

@diyhvacguy Год назад

If you need some help finding the right part and walking you through replacing the motor, check out our membership at Patreon.com/diyhvacguy where you will get one on one help with diagnosing and repairing. It’s cancellable at any time and only $25/mo. Best, Dave

@medwards3798 Год назад

Thanks for the informative videos, how much does this type of fix usually cost? And can a complete amateur try to replace a blower motor?😁

@diyhvacguy Год назад

Totally. Just be safe and make sure to turn your breaker off before you touch anything! This job was $600 with materials and labor. It was an oem Trane motor though.

@robbanks1436 Год назад

@@beaglemice4585 did you do it yourself? I am going to do the same.

@robbanks1436 Год назад

@@beaglemice4585 thanks for the info

@thegodessqueenhope5667 8 месяцев назад

@diyhvacguy how do we hire you??

@PC-uz1pv Год назад

Can you explain the symptoms they were having ? And how did you know it wasn't a sensor or a furnace pressure switch? My York is old and just stopped blowing. Will light up, get hot, and then shut off. A motor is 300 bucks, sensors are much cheaper. Can you show how to test so you know which one to get? Also, it's a down draft furnace I think. Are those super weird? A little different to work on.

@diyhvacguy Год назад

In the video you may have saw it but I tested between neutral and the heat pin and I was getting voltage 120 V to that pin so I knew the fan was getting power but nothing was happening. The symptoms for this one was that the flame would light but the fan would not turn on. downdrafts are the same thing but the components will be oriented different. If you’d like some more information feel free to email me at DIYHVACguy@gmail.com

@KingOfPokerAndSlots 8 месяцев назад

Hello @@diyhvacguy Nice video. I had two techs checking out when the heat did not come from my Trane. One recommended draft inducer motor replacement the other said blower motor. I tried draft inducer motor, pressure switch to get the heat working with very low heat coming for few days. It stopped with a humming noise then I replaced the run capacitor the same low heat came out for a few days then heat stopped with the same humming noise, I tried run capacitor changing but this time it did not work , same humming noise again. Does it sound like a blower motor replacement ?

@Santiagohaward Год назад

What about they work on cold but don’t want to work in heat ?

@wasatchmotoco Год назад

I’d try swapping the heat wire on the terminal labeled “heat” with the one labeled “cool” and see what happens. If the fan works then you probably have a bad fan. If it still doesn’t work it probably is a bad board.

@Santiagohaward Год назад

@@wasatchmotoco thanks sir fan it’s working , the board of my a/c don’t work I need to change furnance that board don come anymore unfortunately

@jungsandhu9267 Год назад

Hey Buddy, one quick question, looks like you are certified Hvac tech, so why the channel name DIY HVAC Guy?

@diyhvacguy Год назад

Because a lot of people aren’t certified but that doesn’t mean they don’t have the capability of repairing their own furnace or air conditioner. So a lot of my videos help DIYers whereas a lot of other hvac channels kind of frown upon the idea of a homeowner fixing their own system. Obviously someone who doesn’t know basic functions of a furnace or how to use hand tools probably shouldn’t be fixing their system but alot of people can totally fix or replace their system and save a bundle. I also explain in my videos where to buy products and parts, what kind of warranty a homeowner can expect etc.

@diyhvacguy Год назад

Thanks for the question!

@jungsandhu9267 Год назад

I appreciate your idea, your channel is subscribed 👍. Hope I'll see more detailed videos in near future from you.

@user-ek2gu1kg2j 22 дня назад

Removal starts at ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NMCIQJX74C4.html

@petertom4423 Год назад

My blower is unbalanced. Is it possible to balance the squirrel cage?

@diyhvacguy Год назад

Are you sure there isn’t something stuck in it? Your best bet is to pull the assembly and manually spin it and see what’s going on. I’ve had the mounting holes get stripped and cause it to wobble around.

@buddy7485 Год назад

I didn't know Trane Systems were capable of breaking

@diyhvacguy Год назад

😂😂😂 Aparently snakes can break em

@leonardsturm9775 Год назад

@@diyhvacguy don't know about anyone else, but my blower motor on an XV80 TUD100R95K4 has gone out twice in 14 years, but everything else on the furnace is like new. Also had to replace the Trane evaporator on AC after only 12 years. A little disappointed I didn't get at least 20 years out of all of it considering the initial system cost.