How to replace a broken HDMI port on PlayStation 4 motherboard

iPad Rehab Microsoldering & Data Recovery

Подписаться 178 тыс.

Просмотров 210 тыс.

50% 1

Support our work by sending us a repair, buying supplies or coming for training. www.ipadrehab.com
All the tools and supplies we use in videos are available at www.ipadrehab....
Jessa’s Equipment Links:
Our thermal camera recommendation:
Seek Compact Pro for Android amzn.to/2J5kkfA
Seek Compact Pro for iOS amzn.to/2RXrF4H
Macro Close Up Lens for SEEK COMPACT PRO THERMAL CAMERA tinyurl.com/5d...
›Charging:
USB ammeter: amzn.to/2k2suZN
Bona fide MFI charging cables
Anker: amzn.to/3u3GqIG
Anker USB-C: amzn.to/3KIMbSm
›Microscopy:
Recommended microscope: amzn.to/3IyoBFT
Light ring for microscope: amzn.to/2iRRdOt
Barlow lens: tinyurl.com/4n...
›Soldering:
My soldering station with standard iron: amzn.to/2hG656k
Primary soldering tool--mini hot tweezers amzn.to/2hY5DN5
Favorite tips for mini hot tweezer: amzn.to/2iSKF67
Favorite tip for standard iron: BC2 amzn.to/344iWZ2
›Ultrasonic cleaning:
Crest iphone sized cleaner: amzn.to/3qVxO52
Branson EC cleaning fluid: amzn.to/2iSVuFq
›Hot Air:
My hot air station: JBC TE-1QD not available on Amazon, $1500
Recommended station Quick :tinyurl.com/2p...
›Small supplies:
My favorite tweezers--store.ipadreha....
My favorite flux:amzn.to/2iCy5Vm
My favorite solder:amzn.to/2hY1gBA
Kapton tape: amzn.to/2iqxVAY
My blue mat: amzn.to/2jfAiKp
Cutting board I solder on: amzn.to/2kDO0XJ
Low melt alloy:amzn.to/2iqITGB
UV light: tinyurl.com/39...
›Diagnostic tools:
Tristar tester: tinyurl.com/35...
DC Power supply: amzn.to/2iRN9hj
Multimeter: Fluke 115 amzn.to/2iqMmou
Fine point tips for multimeter: amzn.to/2iRPjgP
Freeze spray:amzn.to/2iuNZnE
Zxwtool: tinyurl.com/2p...
Storage Repair Case:
Christy’s Favorite for iPad Repair: amzn.to/3KIhQD6
Jessa’s Favorite for iPhone Repair: amzn.to/3qYTgGc
Large Size for iPhone Repair: amzn.to/35m1Gzh
iPad Rehab is a participant in the Amazon Affiliate marketing program and may receive commission for orders placed through above amazon affiliate product links.

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 295

@JessaJones 6 лет назад

Playstation 4 HDMI connectors here with same day shipping from Western NY. Www.iPadRehab.com

@irwinada2 6 лет назад

iPad Rehab where can I get this repaired

@jasonshrout8921 5 лет назад

I just learned more in 20 minutes than I have over the past 10 years! You're an excellent instructor! Thank you!

@michaelholmes104 7 лет назад

OMG....you saved me at the least 260. So i bought a small Zeny Rework.Tried to not wait on Chipquik next day delivery and found myself unsuccessful. But was happy with the hour practice time..lol.I received CQ today and now you and i are BFFL.(Best Friends for Life)......Thanks..

@ThePols87 4 года назад

Incredibly knowledgeable and thorough! Loved the video. These are exactly the type of videos I hope beginners stumble upon when starting out.

@JCowdigital 7 лет назад

I see what I did wrong on the one I was working on. I didn't put in ChipQuick/QuickAlloy before removing the old connector. I just applied as much heat as I could with tons of flux and ripped off a pad! Well, I learned. Might be able to rebuild the pad, Did that on a Fire Tablet once.

@orbita1 7 лет назад

What temperature are you applying to the port with the air gun?

@ottovp 4 года назад

i've seen on other videos about 320° C

@humbertogonzalez1269 4 года назад

A little less than too much!

@mariopic 7 лет назад

i find if u use a preheater under the pcb and a hot air iron above the pcb the port comes off clean also for install use solder wick and thin liquid flux and use solder paste to install the new hdmi port

@JessaJones 7 лет назад

Solder paste is a recipe for bridged connections! Too messy

@SamuelCharmetant 7 лет назад

You make it look so easy ! Tx for sharing

@Abdallah.795 3 года назад

Hello thanks very much for sharing your knowledge i want to know on what temperature u used the hot gun

@brenlyd 5 лет назад

attempted this. the hdmi port WOULD NOT COME OFF with a full workshop available to me. it was extremely stubborn at the anchor pins. I used a heat gun, solder iron, flux, desoldering suction. still too stubborn. some more tips on how to effectively transfer heat/ desolder would be useful

@JessaJones 5 лет назад

You have to watch the video -the key is using a lower melt alloy.

@sandy1234853 7 лет назад

i am going to attempt this with just a soldering iron and not even a good one a cheap one. should be easy enough.

@ASkilledRoy 7 лет назад

MOZZYTHE1ST any youd recommend?

@mark9404 4 года назад

What would be the minimum magnification required to attempt this at home?

@khkworks777 8 лет назад

MY PS4s power supply has gone dead ! there is a big transformer that have melt, I suppose this could be the cause. what do You think?

@crxsks 7 лет назад

what temperature did you have to use when applying heat to the bottom?

@beyondrepair8112 8 лет назад

i m a technician in india jesse.i hav an apple 5c it was dead, i chaged d u2 ic it started workin,bur shows accessory not supported on charging.plse help me wid d solution.

@ScoopDogg 8 лет назад

I've found the easiest way is to film yourself taking it off, then play the film backwards voila!

@JavierOcampo 7 лет назад

Can someone help, the solder won't stick to the pads. She does it so smoothly and it just sticks perfectly! When I try it, the solder gets bunched up and then it's difficult to take off since I don't have the solder remover wire stuff.

@JessaJones 7 лет назад

Use a bigger tip that has enough thermal mass for the job

@roma_kolesnikov 7 лет назад

круто! спасибо!

@jaimegonzalez4716 8 лет назад

hi, what type of solder do you use??

@TheDigitalAura 8 лет назад

Check her earlier videos as she clearly says. I think it could be kester.

@ravendrow83 8 лет назад

good vid...i have done hundreds of these ports..i actually have a fairly easy way of cleaning out the holes for the legs of the port...you use some 0.5mm solder braid and your hot air station with a small nozzle heat the holes till they liquefy and feed the solder braid through the holes cleans them out pretty quick..i am currently working on one that has been completely fubar..a previous tech ripped all but one of the pads off the board (that's what happens when you try to pull a port without heating it properly) so i now have to completely rebuild the circuit with awg 36 wire ...oh and they blew off several of the diodes near the port so i get to replace those too lol

@Eyem1337 4 года назад

When I buy broken systems and see that much damage (just had one, 3 missing diodes), I end up salvaging the working parts (PSU, BD Drive, HDD, etc) and resell them, I actually 100% of the time end up making more off of the console than I would if it was just working. I've done about 6 of the HDMI ports now, they can be a real pain in the ass

@ThePols87 4 года назад

This is my literal nightmare! Lol

@mark9404 4 года назад

Any advice on what would be minimum required magnification for this job?

@Cabeza492 2 года назад

She is actually using very good quality tools and supplies, as I can see, she is using a very good desoldering wick and as she said she's using Chip Quik, which is a very good flux... so I can't understand why struggles so much to clean those support holes. The only reason I can think is the soldering iron is too low on temperature, otherwise that solder should came off very easily.

@jamesgravestock8234 8 лет назад

This video actually helped me a lot when I was struggling. Now repairing HDMI ports like a pro, thanks to you :) Much repair Love

@JessaJones 8 лет назад

Fantastic!

@sethgandy1337 3 года назад

I just finished doing one of these replacements with your instruction! I have so much respect for your skills and steady hand! That was seriously such a tricky operation, especially without a microscope! ChipQuik for the win! 😁

@MrBnbsfsd 7 лет назад

I'm deaf, I can hear other videos with no problem perhaps a redo with louder voulum. It would be great for Me.. Love the video like to get in touch on a couple of tools you use and flux solder... Please reach out to me. Thanks and Kudos.

@MrAmity009 3 года назад

You’re the first person who mentioned that design of the board has to do with thermal heat displacement . This shows that you’re a professional 👍

@dubwillis340 4 года назад

Hey maam! Im 14 and i probably watched this video 17 times to try to fix my hdmi port on my ps4 and i was successful after around 2 hours. I was lacking a couple of tools and my port ankers were completely broken off and after trial and error i was able to get them. I couldn't have done it without your help thank you so much. You really made this look too easy it was a HEADACHE. For any future people trying to do a first home repair i suggest to take it slow and do not get frustrated and go slow or you will make incredible mistakes.

@tcctech3211 3 года назад

I know this is an old video but i have to say you are a genius and your instructions are flawless thank you

@AngeliRivera92 4 года назад

Question my mother boards 19 pins broke off well some is that fixable ??

@hddrecoveryservices 8 лет назад

thanks Jessa, just did this on my nephews PS4, and your video was very helpful as I have never working on these units before. Result - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-chjgvDCO8KQ.html one happy kid :)

@asrarhassan 6 лет назад

My branded Goot GS-100 Japanese solder sucker will suck that solder out. Its only $20 on ali_express, try that.

@tastytechaddictsmtb 8 лет назад

To clean out those holes I just use an electric solder sucker gun, it gives out loooooads of heat and sucks like an elephant after a peanut, clears them no problem.

@bigslatt708 5 лет назад

Hi this is very old but can a soldering gun replace my HDMI port

@leecwilkin 6 лет назад

when i replace these i use a solder sucker from underneath and use hot air from the top and the holes normally come out clean first try

@tc7630 4 года назад

I have been in an electronic engineering program for 3 years and this feels more tangible and useful than about 90% of the crap i learned

@ChristoefurQ 8 лет назад

New sub, Followed you after watching you on Louis's channel. Love what you do, Thanks for sharing it

@stugtodd2778 3 года назад

Yeah awesome. I discovered my Pioneer KRP-600M had only one working HDMI port after having it moved over 700 miles and over water to me here in the UK. It's the first 2nd hand display I've bought but always a risk on Ebay and I've found that out to my cost in away. I still have the working HDMI. There's DVI-D and component - fortunately this monitor supports 1080P over component RGB. But it's always a worry when down to your last port. Took the thing apart yesterday and these things are built to last so even getting the board out took quite a while and about 40 screws, ribbon cables, power supply connectors etc. Anyway one of the connectors is very slightly damaged inside - on the far right, second from right the little copper strip is very slightly damaged. It wasn't saying no signal before just a blank screen. But I'm actually glad it's just a damaged port itself and not the chip itself dying. Like 75% eventually of LG video input boards lol. Anyway it's £160 to buy a fully functional tested used board, or it's send it off for repair through the post somewhere - or attempt it myself as I've nothing to lose. I don't have any soldering equipment anymore and have never attempted HDMI before. But I love all this stuff so I'll guess I'll just need to think about it first. Your example here is by far the neatest, professional I've seen yet here. Amazing touch and skill - very quick and tidy too. Fantastic. Subbed.

@NunYa953 5 лет назад

Listen up kids trying to fix your PlayStation: this is an excellent video and great instruction. One thing to remember and consider before attempting this is the proper tools and materials to do this job properly are not cheap. Im all for people learning to repair things for a variety of reasons, but the most common is to save money. If you buy a $10 iron at Walmart and borrow you grandma's magnifying glass you are destined to lift pads and screw up traces. Then you'll take it to a repair shop and the repair will cost 5x what it would've cost to just have them do it first. Does this mean you have to get a degree to do the work? Absolutely not, but you better be prepared to fail for the first few times! Failure is the quickest way to learn sometimes so do the first repairs on friend's PlayStation. 😉😂

@jaylingibbons7857 4 года назад

So I tried this repair with a heat gun off of eBay and I learned that it blew the right amount of heat but way to hard. The board around my hdmi port is burnt quite a bit. Will that effect it’s functionality? And I learned my 2$ soldering iron from the flea market I bought when I was 11 isn’t hot enough on the top to melt solder

@PrinceTechJourney2050 2 года назад

My PS4 is turning off immediately after I open up any game, disc-based or not. The PS4 first gives an on-screen warning that the PS4 is overheating, shortly followed by the light bar on the PS4 flashing a red color, 3 beeps, then a black screen. It does not, however, immediately turn off when I am on the main screen, only when I open up a game. Does anyone have any idea why this is happening? (Additional information: it's the optical drive/HDD area which is overheating, and every time I turn the PS4 back on, it searches the HDD in the same fashion as though I installed a new one, and comes up with the error message that the PS4 what not shut down properly.) how fix that.

@lMoNsTiRl 2 года назад

i came across your video while searching how to replace my display port. I assume its similar to the process you showed us here but I'm curious if you know of any differences before i decide to go to work on it. also i checked the website and cant seem to find a replacement mini display port, can you possibly help me out and lemmie know where i can find one please? thank you in advance!

@ianjsandfly4552 Год назад

I tried this and kept trying to get the solder on the brown connectors…however they seem to have gotten scratched off( about 4 strip places turned completely brown). DIY fail. 🤧 Was my soldering machine to hot?

@FelineThrasher 4 года назад

I'm hella glad I had this video in my watch later thank ya tech wiz you saved 4 years worth of saved data on my ps4 🤘

@mike7958 8 лет назад

That's a bevel tip, not a chisel. T15-B are bevels T15-D are chisels. Also, you can get the FM-2030 140watt heavy duty iron. It works wonders on those larger thermal mass ground planes. And have you tried the FM-2024 or the 808 desoldering tools? Mine work great for through-hole components. I'll bet they would clear those holes with ease.

@JessaJones 8 лет назад

I have the FM 206 with desoldering gun. Still in the box. Just not enough use for that on when soldering on microscale of iPhones.

@mike7958 8 лет назад

Very true. I can imagine the heavy duty FM-2030 iron and FM-2024 would not get much use when it comes to microsoldering. But in cases like these, when you're not working on the microscale, they can make your life so much easier. And the FM-206 runs every iron under the sun. Why not take advantage of it?

@7io_x 5 лет назад

Hallo Can I send my Ps4 motherboard with HDMI brocken and fix and how money that is coast With bist wishes

@BirdManPhil Год назад

I watch alot of you soldering pros on RU-vid and it always blows my mind that you've never heard of a deslodering iron.

@hove131 5 лет назад

went to remove an hdmi port from an xbox one s today and was using my new hot air station i purchased from Amazon. I fluxed the led free solder and added some leaded solder to the ground pads and used my hot air gun at 480 degrees. I worked at it for awhile and could not for the life of me get the solder to melt to release the port. I have no idea what the deal was. Any ideas? Thanks in advance.

@MichaelDaponte-fy9ji 3 месяца назад

What are them parts you taped over called the shuare with black in the middle and silver on both sides was wondering

@Jonathan11225 7 лет назад

your hands seem steadier than Louis Rossman Hands

@shaneoneil1862 3 года назад

At 2:10. The name of the liquid she's applying anyone know? Possibly another form of flux?

@jennajohansen6377 7 месяцев назад

Thank you so much this video is amazing. Camera work with the microscope is amazing!!!

@jamescoon9950 6 лет назад

If you put it on a rework machine and pre heat the board they come real easy., Great video .

@Brokevwap 4 месяца назад

Your are the only person who actually talks about how much heat is really needed!!

@VonSpud Год назад

Excellent vid with some great hints and tips for those tough jobs. Thanks.

@realisticcritic 8 лет назад

How terrible is it to melt the through-hole joints with an iron then blow the melted solder out the bottom of it with compressed air? Thats what I've been doing.

@JessaJones 8 лет назад

Totally fine. As long as the joint is strong in the end you're good to go.

@alejandrotobienne584 3 года назад

And this is why this is a 150 dollar job vs paying 180 for a new Motherboard.

@saramuzinski6901 7 лет назад

Hello, I have a problem when I turn on the blue light flashes and the console will not start, I tried almost everything. Is it possible that this is the HDMI port?

@dstrollers753 7 лет назад

Sara Muzinski no

@filkz4530 6 лет назад

Sara Muzinski its definitely not the HDMI port. It is either the motherboard, the power supply, the hard drive, or the RAM. You’ll have to troubleshoot to find out.

@3absisoRA 8 лет назад

i have my own consoles repair shop back here in the middle east - Palestine, i do this regularly specially for the 10xx and 11xx ps4 models, one thing is that the replacement port sometimes does not align correctly, so i need to clean the 4 fixing holes before i replace it to so it aligns perfectly, great vid thanx

@nachhaltig-reparieren 6 лет назад

hello Lady good job 👍can you help me and answer a question? I lost an SMD component when replacing the HDMI socket. It sits directly near the HDMI jack ... there are two components .... a 2,6uf capacitor and a diode, can you tell me what that is for a diode?

@George241312 8 лет назад

What flux are you using here ?

@JessaJones 8 лет назад

mailin.repair/amtech-nc-559-v2-30-cc-16160.html

@katzhai0000 6 лет назад

You make this process look so easy and simple! Very informative video thank you.

@rusovich1999 2 года назад

Joe costo thia work$$

@MTX95000 2 года назад

do the 4 main soldier points power any thing at all or are they just to reinforce the port-

@Freb7 7 лет назад

Hello, I have a doubt, my ps4 when it lights presents the PlayStation logo does not return to give video and is left with the light in white. I want to know if it is HDMI Video Output IC MN86471A Chip for Playstation 4 that needs to replace or only the HDMI port.

@victornpb 8 лет назад

A good reason those can get damaged is because there are HDMI cables that look like hoses, and they put a lot of stress on the port.

@TheDigitalAura 8 лет назад

Mostly careless kids and hamfisted adults don't know how to treat gear with respect. I see things in all manner of conditions.

@orfeous 5 лет назад

Just happened to my Onkyo recievers one hdmi port. Im using Supra-cables and they are quite thick and causes some stress on the port. Mine needs fixing because the port is kinda loose. I can wiggle it up and down. Signal is lost doing this :) new HDMI-board is like the half price of a new reciever :) so i think it will be cheaper to change or resolder the connector pins that are loose.

@Michael-w8v 3 года назад

My honest opinion is I wouldn't use hot air to insert the hemi port unless it has a kapton tape on it.

@haseebahmed3262 4 года назад

I wish you were my mama. Thanks for this great tutorial.

@renegarcia5657 7 лет назад

Time to buy a new ps4

@caddymac3 6 лет назад

Everyone that feels that way. Send the one to me.

@LukeWatts85 3 года назад

Thanks for the clear video! Very informative. Hopefully you can help me with this. I have a PC motherboard from a 2013 Lenovo H520e. The PC never had a back IO HDMI port but the connection is there on the board (just Lenovo never put one on). If I just solder one on should I expect it to work (as long as I do it right)? The processor will support HDMI also so no issue there. It's not my main PC anymore so I'm using it to experiment and see how much I can upgrade it. Thanks

@CookieCraftMedia 7 лет назад

Seems like a stupid question, but this could be possible with a normal soldering iron as well, I suppose? Snip off the old connector, get rid of all the remaining pins and pieces from the old connector, clean the pads up with some flux and wick, and for the new connector just melt all four main solder joints in a circular motion to seat the connector, and then finally soldering the little pins by doing the pull-soldering method. I cant see why it wouldnt work.

@shanetillery254 8 лет назад

When you get a chance will you make a video on the Xbox One Hdmi, and once again great work..

@xlwirelesselectronicrepair 5 лет назад

Same way

@kk-yy8oi 4 года назад

Very nice video and thanks ... Quick question, how secure are those HDMI port? When we connect HDMI to TV port ... Sometimes when we move the cable , or when we push it in... It's not easy to make the port lose right?. What happened was one of my TV , when I life the HDMI cable, the colour or screen turned dim and when I move it again .. it turned back to normal ... So I assume the port was losen?

@thefixitgal 7 лет назад

OMG another lady Tech. Hi "Waves"

@garyvte 5 лет назад

It’s *Waves* with * instead of “

@user-wj9xq7ig2v 4 года назад

It's bit of a secret that women are usually better at fine detail work like this.

@DannyWilliamH 4 года назад

03:23 No, for some reason that I cannot find an explaination for, the PS4 (at least on the original model SAA-001 board) has one side of the socket barely soldered on on some boards. The other socket on back (some kind of connection port) is always half soldered and the HDMI is almost always half soldered or all 4 look like the joints on the right. Very bare and spare solder.

@matthewcargill9489 5 лет назад

Great video and dialogue! Thanks!

@jaybee1158 3 года назад

I know this is an old video but got to say you did a great job.. I’ve done my share of soldering and being self taught , I use to be hesitant on doing solder jobs. The smaller the more I was like “idk bout doing that” lol. But got better and now I’m like “who needs soldering done” lol.. still don’t like doing very small solder jobs my hands shake to much , but anyways just giving you a salute .. much respect..

@TheDigitalAura 8 лет назад

Good equipment is key to this kind of repair. A cheap iron will just get you into trouble (not you Jessa)

@Brawlio13 5 лет назад

DigitalAura so I'm guessing a $40 iron don't do... damn

@lifeisagame5796 3 года назад

Great Job

@TonyToneFixMyPhone 8 лет назад

I've done a great handful of them too LOL. One time I lost a diode near the port and couldn't figure out what it was. (Borrowed a Playstation from Walmart : P) How would one find out what the missing component was without a schematic? Is it possible? [And they have two types of ports, get the one with the reinforced backing, so the pins don't get pushed back in. The one in your video is the opened backed one].

@MrMrSaldana 5 лет назад

Wow i just got discouraged watching this..all other video dont do the first steps..they just apply the heat and remove..

@d00s0n 8 лет назад

very good work. i fix consoles and pcs for a living. and i hate how cheap sony made there hdmi ports. no back plate to stop pines from being pushed back. i have a question what would be a good pc cam to use to work on replacing the hdmi ports? using my eyes alone drivers me crazy. thanks!

@astrataway7077 5 лет назад

I don't know how these hot air guns are designed but I wonder if I could use a culinary butane torch to do this type of job. How hot is too hot? I find it very hard to judge with the culinary torch as the flame isn't vectored to the work like that of an actual hot air gun. I wonder maybe I could add a collar with a nozzle and get the heat where i need it.

@murshidmubarak4857 3 года назад

How money heat can use ant wich soldering is beter for this

@oblioi 8 лет назад

the holes are a nightmare i aggree,but i challege you to the 4 diffrant syptoms of the blue light of death...iv fixed 1 in 20,not good satistics,and for once google not a lot of help on the subject :o)x

@dinoproductions6901 3 года назад

how cost chipquik for 10grams?

@alengine94 3 года назад

Is it not possible to use the sucker to remove the solder from those holes?

@HondaAholic 7 лет назад

For those holes, you would want to use the radioshack solder and sucker in 1 tool.. If iRadioshack hasn't completely shutdown yet anyway.

@CRAZYGAMER-en6rx 7 лет назад

my mate has a PS4 and it was stuck on system storage and its happened about 3 times and he put the framework back on it and it keeps going back to system storage is there a way fixing that or he needs a new console. thank you for your help

@jonataslanzonimoura2647 6 лет назад

Excellent video !!! Can you help me? I changed the hdmi connector on the 1215a board, but the hdmi's near diodes went out of position, can you tell me the correct position? Thank you

@HackingVision 4 года назад

What irons do you use in the video? I heard you say at some point I just can't find the point in the video thanks for the video very educational.

@TheRyano4ever 8 лет назад

very useful video, don't think ill be able to do the job due to lack of equipment and lack of soldering experience but If I had the kit id definitely give it a go... so precise though damn here's me thinking id just be striping a few wires and screwing in a new port... damn it

@mainz_.1896 4 года назад

Can you fix mine I am 15 I can’t pay for it, it’s too expensive for me.

@nicogarciaaa 4 года назад

Lmao

@ryanwakebradtelle8682 6 лет назад

I got the middle part of an HDMI cable stuck in the HDMI port of my graphics card, this wasn't my main machine so I just set it off to the side and didn't worry about it but now I want to use it so could you help me.