How To Replace A Clutch And Rear Main Seal On A Honda Accord Without Pulling The Frame

Подписаться 211 тыс.

Просмотров 131 тыс.

50% 1

Brian Eslick from How to Automotive www.howtoautomotive.com takes you step-by-step through the process of replacing the Clutch, Flywheel, and rear main seal on a 2003-2007 Honda Accord without removing the subframe.
New! How to Automotive T-shirts, stickers, and more! Click the link teespring.com/stores/how-to-a...
Affiliate link mentioned in the video for complete clutch kit with fly wheel, clutch pressure plate, clutch disk, throwout bearing pilot bushing amzn.to/2HWtzQk
Affiliate link mentioned in the video for OTC pilot bearing puller amzn.to/2EWpx8K
Affiliate link mentioned in the video for seal removal and installation tool amzn.to/2HWeVbF
Affiliate link mentioned in the video for Milwaukee Tools M18 FUEL 3/8 Mid Torque impact amzn.to/2WscDdp
Affiliate link mentioned in the video for Milwaukee Tools 1/4 M12 Stubby impact amzn.to/2Xvn5xg
Affiliate link mentioned in the video for Milwaukee 2554-22 M12 FUEL 12-Volt Lithium-Ion Brushless Cordless Stubby 3/8 in. Impact Wrench Kit with One 4.0 and One 2.0Ah Batteries amzn.to/2V19Ozl
Affiliate link mentioned in the video for Milwaukee Tools 3/8 M12 Ratchet amzn.to/2XygDFO
Affiliate link mentioned in the video for How to Automotive Tool Store www.amazon.com/shop/howtoauto...
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomotive.com/
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: / how-to- Automotive-432536836946801/?ref=settings
Google+: plus.google.com/+HowtoAutomot...
LinkedIn: / brian-esl. . 819839118
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick. #HowtoAutomotive

Авто/Мото

Опубликовано:

4 июн 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 255

@HowtoAutomotive 4 года назад

Be sure to check out the How to Automotive Tool Store www.amazon.com/shop/howtoautomotive

@ramiromonsivais9180 4 года назад

How are u buddy,,i replaced my clutch followin ur video,,everything sounds okay,,but now the clutch pedal does not have any ,,strenght it just gets stocked all the way to bottom and not pressure at all,to change gears,,any advise,,

@HowtoAutomotive 4 года назад

Ramiro Monsivais your clutch has air in the system needs to be bled out.

@HowtoAutomotive 3 года назад

@Jeffrey Immanuel You’re right no one cares and I’m blocking you

@lucahugh7209 2 года назад

You prolly dont give a shit but does anybody know a trick to get back into an instagram account..? I stupidly lost the account password. I would love any tips you can give me.

@alexanderamos9961 2 года назад

@Luca Hugh Instablaster =)

@stephenridge7054 3 года назад

I'm a mechanic and I've got to say I love how you describe what your doing and why as you work. Damn good video!

@leetos.4915 3 месяца назад

Yep great diy for my current apprenticeship here in my area

@YOUZTUBE2000 5 лет назад

Brian you are,, by far, the best one handed mechanic- Period!

@HowtoAutomotive 5 лет назад

YOUZTUBE2000 lol thank you!

@yelsinchacon124 4 года назад

YOUZTUBE2000 have you seen chrisfix??

@davidosterman2141 Год назад

Thank you for this video, saved me over $2000!!! My son burnt the clutch up on his 2010 Accord and this video and the 20 times i watched pre/during gave me the confidence to take this on in my garage on jack stands.

@firepr00f77 3 года назад

Finally! An informative how-to without all the extra b.s. or missing information. Steady and clear image, & carefully and well described process. I just helped a (single mom) friend get this done without a hitch thanks to this video. The cost of repair at a shop or dealership was well outside her budget so this video truly helped a family in need. God bless!

@ddobbins777 2 года назад

You are a good friend, Sir. I have quite the oil leak and by watching RU-vid videos I was able to change the valve cover gasket, spark plugs and PCV valve. I still have an oil leak. After watching this video, I'm basically feeling kind of screwed. I do not have the means, or the proper tools, to do this job myself. I pray your friend knows and appreciates what you've done for her. 💯🙌

@-_-abk 10 месяцев назад

@@ddobbins777did you ever figure it out? These Hondas just burn oil when they get past 200k miles

@ddobbins777 10 месяцев назад

@@-_-abk You are not wrong! This is quite the story, so bear with me - you may even be sorry you asked. 😂 I despise going to the dealership because I feel like they take you for all you have, but I decided to take advantage of the fact that I needed my oil changed and that they would have it on a lift and would be very interested in the oil leak. I told the lady up front that I knew it had an oil leak, I just needed them to change the oil and rotate my tires. There was some confusion (gasp! 😱) and when I picked up my car they charged me for a diagnostic fee to find the oil leak. I'll save you the drama from all that only to say I did NOT pay that fee. They narrowed it down to the timing cover gasket and spool valve. You'll love this also, they gave me a total of $4,511.21 worth of repairs that needed to be done to my vehicle. Seven of the items listed were listed as maintenance. Four were listed as repairs and then there was an additional line for a new battery at $221.50 because my battery failed the test. (**Very dramatic eye roll**) Needless to say, I ordered my parts and got right on it! 😂🙌💯

@-_-abk 10 месяцев назад

@@ddobbins777 so the car is back on the road and it’s running good again? That’s fkn awesome dude

@ddobbins777 10 месяцев назад

@@-_-abk Absolutely! 290,733 miles strong! It's been a damn good ride. ❤️

@davegarwood4004 2 дня назад

I'm an experienced home mechanic, and this was a pretty complicated job. This video helped me make sure I didn't forget something and the correct sequence for disassembly/re-assembly. All back together and working great! Thank you!

@HowtoAutomotive 2 дня назад

Nice I’m glad the video was helpful and you got the car back together in one piece. Thank you for watching!

@ericm2333 10 месяцев назад

I used this video to replace the clutch on my 2006 Accord. This video is excellent and describes all the steps perfectly. I did the work with the car on jack stands and also used the jack to support the transmission once everything was unbolted. The only major problem I ran into was rusty nuts/studs on the (2) engine mounts that sit on top of the sub frame, had to drill them out. Total time to complete was about 16-18 hours. Thanks for the great video!

@vjmickelson1 9 месяцев назад

I'm probably going to finish in about the same amount of time. Also a 2006 accord. I had a really difficult time getting the transmission back in. I was also doing this with jack stands and just a regular floor jack. To get the transmission back in, I used the floor jack, and a second bottle jack to get it positioned just right. Then I put in two of the bolts and used them to draw the transmission the last 1/4" onto the engine.

@FTomTijoem 2 года назад

Used this video to successfully complete my first solo clutch replacement and I am super duper grateful for you taking the time to make it, share it and walk the viewer through the entire process step by step from beginning to end. Thank you! Every car has its own quirks so had to be flexible with what was actuality possible on my own 2005 accord but your base of information was key to understanding what needed to be done to finish the job correctly. Wise man once said, you can do it right, or you can do it again. With your help, I got it right the first time. Much appreciation. Moving forward.

@dannyboy643ify Год назад

How long did it take

@FTomTijoem 3 месяца назад

Took me roughly 40 hours Would likely take significantly less if ever had to do it again. Probably. Hopefully. First time through spent a fair amount of time figuring out how to get things done on vehicle. And what tools were needed and acquiring them. Rear main seal wad a pain to remove until realizing it has a metal ring inside of the outer rubber like plastic covering. Once I knew that, came out in 5 min since that info allowed for what could and couldn't be done without damaging anything around it. This video made the entire process possible however. A fantastic baseline from start to finish.

@charlesspears4191 3 года назад

Just finished the clutch job on my daughter's 05 Accord. Your video was a lifesaver. I had never done the clutch on a front wheel drive. Thanks a bunch.

@AM-nn9sv 5 лет назад

Great video. Thank you for taking the time to record it. And the editing process. Solid job. Well done. I learn so much from your channel.

@normanstormy6916 2 года назад

I literally held the flashlight for 37 minutes while you were doing the repairs. Amazing work 👌👍👍👍

@ddobbins777 2 года назад

@NORMAN STORMY 😂 He didn't really need us, did he?

@MrVolcho 23 дня назад

That's how you make an instructional video!!! Thank you very much! Everything is clear, well-lit video, well explained in the exact time! Kudos!

@HowtoAutomotive 23 дня назад

Thank you very much!

@karar.929 Год назад

I bought my 2003 Accord EX Coupe in 2020. I started having issues with my clutch almost a year later and it eventually went completely out. I didn't know what to do. Not everyone can afford to put their car in the shop for a clutch replacement. $1400 is just not affordable. So, since I'm slightly mechanically inclined I started looking for videos on how to do it myself. To be entirely honest, the only thing I'd ever changed on a vehicle was the tires, my master cylinder, and my slave cylinder. I hadn't even changed my own oil yet. However I found your video and was able to completely change my clutch BY MYSELF. I have to applaud you and tell you how thankful I am that you created a very thorough video that left me with no question that I was doing it correctly. I have now changed two honda clutches and I'm starting on my 3rd. Thanks so much and keep the videos coming!!!

@benten6301 3 месяца назад

And you're a woman or man? Your profile shows female.

@syedalam3513 3 месяца назад

I'll need your help Iam trying to this job

@lebowskiazure2094 4 года назад

One of the more detailed videos I found on my Accord...thanx

@21jimmyo 4 года назад

Excellent video, it saved me the hassle of figuring out what needs to come out and what doesn't. Thanks for making a tough job 100 times easier.

@NeumSchmickrath 2 года назад

I just did this job on my sons car and while it took a while I tackled it without issue. Excellently done and thank you tons!!!

@BellaRocko Год назад

By far this is the best how-to video I've ever seen for this job. Very clear, accurate, precise, comprehensive, and included all the torque specs! Great job, and thank you for sharing your knowledge! You are clearly an excellent and outstanding mechanic!

@ianquinn2285 3 месяца назад

God bless you. The fact that you led a straight up amateur mechanic (radiator, alternator, brakes) to do this job is remarkable. If this video had a rating it would be without a doubt a 10/10. Keep up the great work

@383yj 4 года назад

This is a great video. I have done this on a (way too) lowered civic and other cars and now have to do an Accord. I never even thought about NOT removing the frame/cradle. Just didn't think you could. I will definitely be using your method tomorrow. Thanks for saving me several hours of labor.

@HowtoAutomotive 4 года назад

383yj Glad to help. Good luck with the project and thank you for watching!

@SF-rl7hl Год назад

One of the best how to videos on youtube! Very informative & complete, Great job! Thank you!

@davidradtke194 4 года назад

Just finished replacing my sons clutch on a 2005 accord. This video was awesome and a great help. I didn't get it done in 37 min like you, but it saved me time and aggravation. Thanks so much.

@HowtoAutomotive 4 года назад

David Radtke I wish it only took me 37 minutes. Lol power of editing. Glad the video helped and thank you for watching!

@customs112 2 года назад

There's no way I could have got it done without this vid, thanks and where do I send the beer?

@HowtoAutomotive 2 года назад

Glad to help. No need to send anything. Thank you for watching!

@leetos.4915 4 месяца назад

I just saved myself $2000+ labor by DIY education and application. Thanks 🙏 for such a wonderful helpful video on this clutch DIY repair. Excellent and optimal tutorial hands down!!!

@KingDookies 20 дней назад

Just did my 2012 (8th gen, 08-12.) A couple differences, but mostly the same. inner starter bolt can stay, there's another 17mm bellhousing bolt behind the CKP sensor panel by the passenger CV. air snorkel by the radiator needs to come off to get room for the plenum. some of the wiring is different, but common sense. I live in the rust belt so removing the upper ball joint was easier than the lower, still allowed me to get the CVs out. All other differences were minor and common sense (6 bolts on plenum vs 5, one driver side tranny mount vs two, etc.) Thanks for the video. Most online resources illustrate doing it the Honda way (subframe removal) so thank you for taking the time to document this. Also props to your video/narration skill. Very easy to follow p.s. since a lot of people ask in the comments, it took me about 15 hours but I have a mechanical background and all the necessary tools

@archeo289 Год назад

I just finished the job on my son’s car thanks to your vid! It’s running and shifting smooth as butter now. Thank you!

@valadezjose47 Год назад

Can't say enough good things about this video. Very Very informative. I usually deal with dsms but when my daily wouldn't go into gear and clutch wouldn't disengage I bought new stuff and fixed it with this video plus shimmed the pivot ball now goes into gear perfectly.

@RS-hd3wo 4 года назад

Ur out standing, did exactly how you did to the t broken down , not long at all getting ready to put in clutch ,saved me lot of money, Brian thank you ,ur a stand up guy,I'll be. Following you ur honest, stay safe covid 19,👍👍

@gregjones8501 Год назад

Thanks for this idea! I used this technique yesterday and maaaaaannnn it saved me so much time and worked out great!

@Swapped1 3 года назад

Great vid man, I really appreciate the time you put into making it. Amazing attention to detail

@daviderhahon 2 года назад

Exactly, that's the point for me. The attention to detail. Great job Brian.

@xtor13 Год назад

I done mine clutch today. I done it only becouse you show on this video how to do this without remove frame. Thank You so much. This is the best video which i ever saw on RU-vid 👍🙏

@barelyfamous611 Год назад

This is one of the best how to automotive videos I have seen. Going in order, mentioning the tq specs. I can litterally use this as a full reference for everything I need without having to open a manual.

@HowtoAutomotive Год назад

Glad you like the video. Thank you for watching!

@archeo289 Год назад

This is an awesome tutorial! Thank you for taking the time to go through each bolt.

@HowtoAutomotive Год назад

Thank you for watching!

@peterkamau3656 3 года назад

Short and to the point. Very helpful. Thanks for specs too.

@HowtoAutomotive 3 года назад

Thank you!

@craigcarr5114 2 года назад

This video was so great! got my clutch done just by watching this thank you 😊

@HowtoAutomotive 2 года назад

Awesome glad the video was helpful. Thank you for watching!

@krismorey 2 года назад

Excellent video. A great reference to keep on hand.

@tenTimes20 Год назад

Thanks for the vid! So far so good. Got my tranny, clutch, and pressure plate out. Never pulled a transmission. Was gonna get another car until I found this video. Was doubting I could do this myself on the ground using jack stands and a floor jack. Waiting on a clutch kit now. Hopefully she'll be running again soon. Thanks again for taking the time to make and put out this content

@domeryt2197 7 месяцев назад

Amazing video shows every step so accurately such a good step by step guide

@gmans7859 5 месяцев назад

Outstanding! Thank You Sir. Doing my studies , Learning Honda Vehicles. I am about to do just this in the coming future.

@submariner5733 Год назад

Great video , explaining every detail and the tour que specs. 👌🏽

@deyton64 7 месяцев назад

excellent tutorial you have mechanical and narrative skills in abundance.

@hamsterh2b53 5 лет назад

Good video. I did this in my 01 accord and I didn’t realize this many Honda’s where the same. H series K series b series j series.

@unebonnevie 7 месяцев назад

Thank you! A lot of videos on this DIY are a joke. Yours is just amazing!

@davidbutler394 4 года назад

Great job 1 of best I seen by far

@HowtoAutomotive 4 года назад

Thank you!

@mvpeliteonly4747 3 года назад

One ☝️ the best didn’t buy the car as yet but this video is big motiva

@garypwihongi7333 4 года назад

Hi brian Gona do this job today tomorrow Such an awesome presentation bro really appreciate you bro Thanku so much

@doublewidesurprise6016 3 года назад

How’d it go?:)

@tiderfish 3 года назад

Wow that was very comprehensive! I am almost looking forward to my clutch dying... ALMOST.

@ericgriffin5504 3 года назад

MAN THANK YOU SO MUCH FOR THIS VIDEO JUST CHANGED MY CLUTCH AND ALL WHILE WATCHING THIS VIDEO BEFORE DURING AND AFTER. now i am leaving while my wife cranks it and drives it lmao told her if anything is wrong set it on fire or drive it into the river i dont even wanna hear about it HAHA FINGERS CROSSED

@darwindropmazda 5 лет назад

One hell of a job brother👌🏿

@ameerkhattab 2 года назад

Just did my 2013 accord using ur video, it really helped a lot, THX!

@HowtoAutomotive 2 года назад

Glad everything went smoothly. Thank you for watching!

@yavz7565 Год назад

How did everything turn out? Going to do it on my 2016 accord soon

@ameerkhattab Год назад

@@yavz7565 been driving the car for over a year now on the new clutch and hasn’t skipped a beat. Just remember to take your time, this job took me 3 days to finish, each day about 6 hours of work, just because I’m a beginner at this and never did a job this big before. organize all your bolts and nuts in cups or bags so u don’t mix them up when ur putting them back. And bring a friend or two if u can to help take the trans out and put it back in.

@benjaminnoland8468 3 года назад

Fantastic Video, thanks so much!

@josephbonilla5910 5 лет назад

Good morning Brian thanks for sharing

@HowtoAutomotive 5 лет назад

Good morning! Thank you for watching!

@muddrunner413 4 года назад

Best most imformant video I have ever seen on youtube or anywere else. Looks like I'm a little late but I just got done doing this to my 06 honda accord coupe and I'm a mechanic but this video still came in handy. I didnt want to pull the sub frame an I came across this video thankfully. Great information and very well described. Thank you. Only thing I noticed is that you kept calling the release bearing a pilot bearing. But still nothing to complain about. Keep it up man and great job.

@Lifesituations8000 3 года назад

Do you have a v6?

@kodiecher7312 3 года назад

Is this a job you can get done in your driveway ?

@georgebonney90 5 лет назад

Luv the honda content,thank u👍

@ArtemLokhovitskiy 2 года назад

Tomorrow is the day for me. And I am coming back to this video over and over again after browsing internet for the info on how to replace flywheel/clutch/pressure plate and such on 7th gen Accord. Most of videos and guides are either with removing subframe or missing some info or extremely hard to understand due to shaky video and mumbling. So... Thank you for such a detailed and easy to understand tutorial!

@HowtoAutomotive 2 года назад

Thank you and good luck with the job. Thank you for watching!

@Theromanticrejeck 5 месяцев назад

100/10 video sir 👏🏼👏🏼👏🏼👏🏼👏🏼

@briankalinowski9768 15 дней назад

you sir are amazing, much appreciated !

@iggyresells7151 Год назад

Great video man thank you

@Chris-yz5jz Год назад

Thank you for sharing!!

@mrajj1261 3 года назад

Very smart 🤓 thanks for the video 📹

@8000RPM. Год назад

2009 Honda Accord: On a 2009 Accord. 1) The flywheel bolts are torqued to 90 foot-pounds. 2) There are six fasteners holding the intake manifold on. 3) You need 2 men, and a strong boy, to install the transmission. Doing this by yourself, with a floor jack, requires help from the Almighty. 4) Below the rear motor mount, remove the black crank position sensor cover. You'll see a 17 mm bolt that must be removed. 5) It is very difficult to balance this transmission on a floor jack. Next time I'm going to try my engine hoist (cherry picker). 6) I had to use a breaker bar to loosen the transmission bolts. 7) Remove the battery box (there are bolts on the fender, under the box). You're going to need the room. 8) Don't even think of doing this if you're in a hurry or an amateur. 9) Be advised, the axle nut torque is 242 foot-pounds! 10) Once you remove the rear main seal you can use it as a guide by placeing it on top of your new seal then hammer it in place.

@airyordan6291 Год назад

Thanks a lot for making this

@andrewmeece2064 2 года назад

Thank you my dude this is so helpful

@HowtoAutomotive 2 года назад

Awesome glad to hear it was helpful. Thank you for watching!

@Rey_M Год назад

I'll be doing this at my garage. Obviously I don't have a hydraulic jack to lift the car higher. And don't have a transmission jack. Feels like mission imposible 😫. Great video sir!

@pvanwienen Год назад

awesome job very through !

@MrGibratan 4 года назад

Great video very informative

@HowtoAutomotive 4 года назад

Gibran Carrillo thank you!

@alexleroy6640 10 месяцев назад

Great video

@alphonseSaintSivar 11 месяцев назад

I followed this procedure and it's way faster for sure ! This info is pure gold keep it up👍.

@HowtoAutomotive 11 месяцев назад

Thank you!

@billbeckett1021 5 лет назад

You can make the toughest jobs look easy!

@omarG19100 3 года назад

Brian THE MAN 😎✌

@HowtoAutomotive 3 года назад

Omar Chisolm thank you!

@ddobbins777 2 года назад

How to Automotive, you did an amazing job. Thanks for posting. Attn to detail and explanations on why/how you were doing a particular thing was appreciated. Sadly, after watching this one, I've been forced to reckon with the fact that my rear main seal leak is going to damn my beloved Accord. It took A LOT of tools I don't have to get all that done. But, hey... A little education and acceptance never hurt anyone, right? Thanks again!

@HowtoAutomotive 2 года назад

Sorry to hear about your Honda. They are good cars. Thank you for watching!

@305tyrone4 2 года назад

You’re in the video with him😂😂

@luisroca9947 5 лет назад

Thank you Brian

@HowtoAutomotive 5 лет назад

Thank you for watching!

@itsjussjerry Месяц назад

Great video! Btw, you don’t need to remove the 14mm bolt holding the starter. By removing that, you risk breaking the knock sensor when you simply don’t need to do this. Besides that, solid video!

@amac7834 Год назад

Just awesome 👍🏽

@dominicdeluna7309 4 года назад

Great and very helpful video! I might just be able to replace the Main Seal on my 03 Accord. I have AT any helpful tips that diff from the MT install and repair?

@CL9k24a3 Год назад

this looks like it can be done in 4h. Thanks for sharing

@HowtoAutomotive Год назад

Thank you for watching!

@joea505 5 лет назад

That was awesome.

@jessetoptechallen1461 4 года назад

I had done this before on a euro R ACCORD.... SUPER EASY

@HowtoAutomotive 4 года назад

Jesse Allen it’s not too bad of a job. Thank you for watching!

@dickschottky9406 Год назад

Thanks!

@yetthejet 9 месяцев назад

Thank you for the informative video. Can this process be modified for a 2008 Odyssey?

@ammarqasem783 Год назад

Dam. Amazing video love it. Thank you. Is this procedure same for acura tsx 2004?

@theresistantculture5229 3 года назад

This job took me 3 days.

@bnewton239 5 лет назад

that was a good one, thanks.

@HowtoAutomotive 5 лет назад

Thank you for watching!

@johnbon2422 4 года назад

Brian, very informative. What was the brand and type of the red grease used in the rear main seal?

@reedtownsend2105 11 месяцев назад

Video is a work of art. Thank you! I'm thinking of doing this job on mine. Seems like a good time to swap out some other buried components. Any suggestions on what to replace vs what to leave alone? (Example: why not go ahead and toss a new starter in?) Also, should I look into a replacement hose/gasket kit or try to reuse originals? I've got an '03 with 270k miles.

@supergrendel 2 года назад

I just did this to my 2006 accord. Worked perfectly. Just a quick question. How can you tell if the throw out bearing is being engaged/disengaged fully by the clutch?

@greggreg6975 3 года назад

Thanks mate

@robertwitcher5113 3 года назад

When I googled this it brought up a clip, let’s call him billy bob. (Stereotype meant) Billy bobs clip was 4 mins for this whole job. I specifically heard him say we greased it all up so it will change gears easier(I agreed with your method leave it as it is), then he said something else country as hell and I was out. Thank god I found your video. Awesome job I can tell it’s going to take me a week myself .😂😂😂

@HowtoAutomotive 3 года назад

Alex Witcher lol I don’t know who Billy Bob is butI’m glad you like the video. Thank you for watching!

@stephenmras8519 9 месяцев назад

Bought the seal removal tool that you used and the tabs broke off the fingers first try. I removed the seal ghetto style by first drilling through the metal portion of the seal using a 3/32 bit, then running a #8 sheet metal screw into the seal. I then grabbed screw with a pair of vice grips and use a large screw driver to pry it up while pulling on it.

@whiteboy5050 4 года назад

Thanks

@valadezjose47 Год назад

For bolt in 8:22 fyi. It was so tight I couldn't get it loose no matter what I tried. Thing that finally worked was getting a swivel 1/2 inch extensions and my m18 milwaukee going through the bottom of the car and just going to town on it. That was the most difficult part for me. Also I decided to remove radiator giving me better access to starter

@FS-zv8kt Год назад

Great video - very informative. Do you know if the procedure is possible on a 2008 Honda Accord with the 4 cylinder? Thanks.

@DaSesh 9 месяцев назад

ok if you have never done this but you have a lift and a hydraulic jack theoretically watching your video i should be able to get it done.

@smokescreen5238 Год назад

Amazing job with this video This will definetly help me fix mine Oh what size cotter pin are you using by the way and what spray do you use to clean off the oil on the flywheel?

@jkellz7522 Год назад

Great video, where are you located at ? I might need you to do this work and more on my accord

@christopherbrown5338 4 года назад

Would you think the main seal on the pulley side would be the same? I have a leak starting and it appears to be right between the main pulley & oil pan. Thank you!

@mlennon0819 3 года назад

Thank you for making this video!! I preparing to attempt to remove my manual transmission so i can so a rebuild. Is it possible to remove the transmission completely following this videos instructions? Is there enough clearance?

@hashanramesht 2 года назад

Thanks uncle

@travisduncan2701 5 лет назад

Never once seen a Accord this gen. So rust free. Ball joints ain’t separating like that no matter what.

@Lilceaseee Год назад

Hey man! Was just wondering if you have any tips on separating the transmission from the engine. I removed every bolt needed but it just won’t budge, even with pry bars.

@ricardoporoj3979 2 года назад

Muy buen video, yo le cambie a mi carro el clucht y la prensa y seguí tus indicaciones pero el problema ahora es que el carro no camina es un honda accord motor.2,4 mod/2006 de 5 velocidades, espero tu respuesta lo más pronto posible....muchísimas gracias me sirvió de vastante tu tutorial