How to Replace a Hub & Wheel Bearing Assembly (EASY WAY)

Подписаться 390 тыс.

Просмотров 506 тыс.

50% 1

PREVIOUS VIDEO ▶︎ • Do PERFORMANCE Brake P...
In this video, I replace the Hub and Wheel Bearing assembly on a 2006 Jeep Commander. Both front wheel bearings needed to be replaced so I changed them both out and fixed the ABS code, along with the noise coming from the front end. If your the wheel bearing you are trying to replace is a press-in wheel bearing, click on the following link and it will bring you to a DIY on how to fix that.
Related Videos
How to Replace a Wheel Bearing (Press-In Bearing) ▶︎ • How to Replace a Wheel...
If you have any questions regarding the video, you know what to do. Thanks for watching!! :)
______________________________________________________________
Please give it a like 👍 and follow 👣
MILMAST MERCHANDISE ▶︎ www.cteecustoms...
milanmastracci RU-vid Channel ▶︎ / milanmastracci
milanmastracci Facebook Page ▶︎ / milanmastracci
milmast Instagram ▶︎ / milmast
______________________________________________________________
Videos in the Outro 🎥
Do Aftermarket Brake Pads Make a Difference? (WITH PROOF) ▶︎ • Do PERFORMANCE Brake P...
Wheel Spacers vs. Wheel Adapters ▶︎ • Wheel Spacers vs. Whee...
______________________________________________________________
Products Used 🛠
OTC Front End Service Kit ▶︎ amzn.to/2cuWbBZ
Brake Caliper Hangers ▶︎ amzn.to/2dpB6X3

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 427

@topfloorstudio2684 4 года назад

When someone says "this should take literally about 10 seconds". I know I better have 2 full days to complete it.

@haribaskaran2738 2 года назад

Well narrated.

@notforposers Год назад

Lmao! Right?!

@mikeyboy2154 3 года назад

Extremely well explained, well produced video of the highest quality. Your commentary, tips and advice were superb. The lighting made things so clear too. Thank you for your efforts and time.

@milanmastracci 3 года назад

Glad it was helpful Mikey! Thank you.

@jviews1 2 года назад

Great video. I knew how to do it, but you cleared up a few things. Glad it is not just me who forgets the brake dust shield. Certain you found it when cleaning up. Torqueing the axel nut needs more explanation for the viewers.

@lovenhate9116 4 года назад

Damn. U know this has been the best video on replacing the hub assembly I've seen all week. Me and fiancee have watched 5 different people that take down EVERYTHING, EVERY screw u could think of... just to snap off the assembly and replace it... done!... smh THANK U FOR THIS VIDEO

@martinstewart6188 6 лет назад

You did a good job I was able to follow you and understand everything he was doing thanks keep up the good work

@stevemoriarty869 7 лет назад

This was very well done. I am now ready to go attempt this repair on my vehicle. I am impressed with your teaching skills. Thank you !

@milanmastracci 7 лет назад

Cheers Steve!! I'm glad you found it helpful :)

@dutsfoel9251 7 лет назад

me too. I agree with every word you posted. even me (a Dutchman) could follow every second

@GiggleFits 4 года назад

Best Repair video on RU-vid you made this so easy thanks

@analazcano6475 2 года назад

Clear as day, I'm always afraid of nuts not coming loose, will be doing it with my boy

@HenryJohnK 7 лет назад

Very thorough instructions. I like the fact that you had some helpful tools that can save hours or days of time.Thanks!

@antouab221 3 года назад

When I see an DIY instructional video this clear and detailed, my mouse pointer goes automatically to that "subscribe" button along with likes and shares lol.

@milanmastracci 3 года назад

Thank you Antoua! I really appreciate that 🙌

@qx4n9e1xp 5 лет назад

Great tutorial! Very clear, thorough, but you the point! My shop was going to charge me $500, which made me want to tackle it myself.

@rustybarry3405 4 года назад

Very nice. I've had a difficult time with the bearing on my enclave, that's really seized on there. I tried some other tips that all failed or wouldn't work because of various configurations. I hit the tool store & got a bearing puller. After beating the crap out of it, it finally came out. Thanks for the great tip, you saved me from taking it to a shop.

@jasonott5704 5 лет назад

Thanks. Followed all your steps and replaced both front wheel bearings on my 2008 Jeep Commander. Torqued the axle nut to 95-100 ft-lbs. Great video. Thanks agian.

@OtterPeopleInd Год назад

Thanks a lot , what helped me a lot was the wheel bearing puller tool. You did awesome at explaining everything in a way I understood. Thank you so muchb

@LuisMoreno-fl2jc 3 года назад

Very good job explaining process Thank you for taking your time to explain everything. Excellent job!

@cosmiccowboy1 3 года назад

My hero! You are so calm and easy to follow....thanks so much great tutorial!

@MRWHITE-ud2gk 5 лет назад

1 of the best step by step vids!!!

@lorenzoscott8551 3 года назад

This is the easy way.. The other guys make it difficult. Nice and simple good job bro

@pm1035 6 лет назад

Great job! Your teaching skills are fantastic. Your very talented.

@zacharyprice5886 5 лет назад

Great video, I like to use slide hammer in lieu of the puller, as it puts less strain on the drive shaft, as shown on this video.

@anthonyhitchings1051 3 года назад

good job on cleaning up the mating surfaces

@Eyes0penNoFear 3 года назад

One of the best step by step videos I've seen! I replaced the wheel hub assembly on my 02 XL7. The assembly came pre greased, do I need to add any extra grease to it?

@Spitfireseven 2 года назад

Great video! Explained perfectly!

@thesteadyanchor 7 лет назад

Awesome job kiddo! Now I'm ready to go to work on my project, thank you!

@adamm2716 6 лет назад

instant like for that car problem sound attempt you just made my day

@felixponcedeleon5390 7 лет назад

Great video, 100% fully understand and clear.

@hp2179 4 года назад

Young guy very direct and precise

@quarawlisstafford487 8 лет назад

i feel like i learn more from this channel then engineering explained

@juliust8411 8 лет назад

Lawl

@SomeMechlover 8 лет назад

This is a tutorial after all it is showing you how to do it, he's more on the technical side so you can't exactly compare them

@quarawlisstafford487 8 лет назад

Mikel Wemblay as a channel i learned more from here then there thanks for your peanuts from the gallery tho

@lindseyandrewal 5 лет назад

Well done... you give anyone confidence to DIY Thank you

@pedrowalter 4 года назад

Excellent. That's how you change the wheel bearings. !!!!!

@SportsMusicCars 3 года назад

I've done several hub and have a video to put up of the latest one, done today.

@erminronoldimoreno5003 6 лет назад

You are the best brother! Thanks for u explanation so clear and simple

@TomGlander 9 месяцев назад

Well done, man. Very good.

@kjlanier1975 2 года назад

That was very helpful and detailed. Thank you a lot for this video.

@RonaldDCass Год назад

I like that you use anti-seize. I also apply anti-seize to the axle SPLINES. I have fought for hours to get the axle shaft to break free when it's rust welded because it had been installed dry. Also I have had the caliper bracket bolts loosen & one fall out almost causing a serious accident. Use lock tite on the thread portion closest to the end of the bolts that will be in the threads of the hub. Put anti-seize on the portion of the bolts that will be inside the knuckle holes & apply correct torque.

@fromanabe8639 4 года назад

This is a 14 "Go-Ahead" video in just 16 minutes. Not a record but he's definitely in the running. for 2nd place.

@wollega1 7 лет назад

You are the master of what you are doing and you know how to tell things too. Great job. Peace.

@joebriggs9599 5 лет назад

Thanks Bro you saved me money I did it myself.

@davidgarner3275 3 года назад

A superior video. Excellent step-by-step!

@johnjohnyjonock 4 года назад

Great video. Well filmed and narrated. I'm confident I can do this now. Thanks

@davidsnyder9379 2 года назад

That's is BEST information yet .

@dit5564 8 лет назад

Good job. I have a Ford Focus MK2 with 2 noisy front wheel bearings. Thank you for letting me know how to replace them.

@willevans1247 4 года назад

Great explaination an made it look very simple, anyone with decent hand to eye coordination can have a go at these rip things because garages charge a stupid amount to do for you 👍

@rafapine5921 7 лет назад

Good job tomarrow I will be applying what I learn u have wonderful mechanic teaching skills also good camera video who was filming I will be looking up your videos

@gerardoorta727 3 года назад

Great job I appreciate the comments and the explanations.

@pappaclutch3266 5 лет назад

Really wish you had a CV joint remove and replace video... I like your style and filming.

@davidrobins4025 Год назад

I've missed the dust shield too. Very well explained. Did the torque specs come with the wheel bearing? I maybe missed hearing what you said about that.

@bubblemanpie 8 лет назад

Hey Milan, just wanted to tell you that I'm buying a VW Bora, aka a MK4 Jetta, which is pretty much Golf with a boot. Its timing belt had snapped so the valves are bent so those are going to need replacing. But thankfully for the rest of the small jobs I'll be able to watch your videos for help, because the Bora is basically a Golf underneath and on the inside. Just wanted to tell you that you'll be of great value ;).

@H3YdUD3 8 лет назад

check out bmacvags channel

@bigbertha4080 4 года назад

You made this look so easy.

@jikesimmers 6 лет назад

Very detailed and easy to follow. Thank you.

@newdna2523 3 года назад

Great Video all the info i needed to do the job. Thanks

@juanheredia6609 6 лет назад

Wow!! Very well explained. Thanks so much

@thomremington27 Год назад

EXCELLENT PRESENTATION ...!!!

@SethPaul42069 5 лет назад

Great great video. Yes they are right in the comments about needing break dust cover but still an amazing video ty ty

@specmos1847 7 лет назад

thanks this made my 07' liberty bearing hub change easy for first timer. Rented the hub puller but wouldnt fit, sledge worked better for me.

@Seal00754 6 лет назад

Use a wire brush on the exposed threads before you start the undo, the lube will help as well. But the rust can damage the threads and make the nuts loose. Good video. On Range Rover similar set up, the book says use Loctite 648 on the splines. First time I have ever heard of this. I think copper ease loosely applied does the trick. The second hand hubs came without any trace of lube or loctite.. Job being done soon as I get new bolts.

@EDUCATIONGUY-l4e 2 года назад

GREAT VIDEO... EXCELLENT JOB!

@Joricano 4 года назад

very thorough..love it

@GabrielPerez-fe1rp 4 года назад

My 2005 Jeep Liberty has a noise when the wheel is turned, even if the engine is off. What type of problem is it? I enjoyed your video and I learned so much. Thank you 🙏

@milanmastracci 4 года назад

Sounds like it could be your power steering?

@ronwood3586 6 лет назад

excellent demonstration, great video

@cncbuss1 6 лет назад

Very smart method of working. Good job!

@isabelgarcia891 Год назад

Wonderful explanation thank hou

@LAnonHubbard 5 лет назад

You speak nice and clearly and I really appreciate the time you spent on making the video. I'm slightly worried about 8:17 using the two leg puller to push on the axle (and pull on the hub/bearing assembly). My concern is that pushing the axle towards the diff/transaxle could potentially cause damage at the diff. Is this possible?

@frankgalassi7821 3 года назад

Did you replace the dust shield plate? I like your video, You explained very clear. Good job 👍

@dougbach7105 6 лет назад

Good Job, I really enjoyed the video it was very informative and it did not bore me!

@nickyscarfo1 6 лет назад

dude, great step by step tutorial.

@metalhalide4043 2 года назад

Great video, thanks for posting, should the ABS cable be removed from the hub assembly before removing / installing?

@marcelsavard498 7 лет назад

Oops i think you forgot to replace your dust cover :>) But your videos are good and straight forward.

@ST1300ful Год назад

Excellent video. Just subscribed

@remiebelmonte767 7 лет назад

Very good video and very good explanation.

@tonytotten408 5 лет назад

Great video dude well explained 👍👌

@robspoletini9942 7 лет назад

Very glad I found this video. Thanks!

@neo57611 4 года назад

Hub puller great !

@wilbertodiaz6210 4 года назад

👏👏👏 exelente your really explain nice and clean... Good jop !!!. Only one suggestion.. more lights

@goaway1ify 3 года назад

Great video....Lots of great tips too...thanks

@milanmastracci 3 года назад

Glad it was helpful!

@Passionate747 6 лет назад

Excellent work very well explained . How to install the front wheel bearing on 2005 BMW 750li it is making some noise like grinding sometimes . The car has 165000 km. Thanks for posting the video.

@ddchannel3889 4 года назад

Well explained, useful. Thanks

@1John5-19 8 лет назад

Very well done. Thanx for sharing this video. How about my Lexus GS300 2006? Do you reckon I should replace the hub and wheel bearing? Thanks advanced.

@djbigtrill 6 лет назад

Thanks for the video...never thought to put on the anti seize.... got 2005 dodge ram 1500 to do today...

@milanmastracci 6 лет назад

Throwing a bit of lubricant on the backside will make changing it later so much easier

@gang208 5 лет назад

This is an excellent instructional video. My only comment is on the terminology. The thing you call “spindle” is actually called “steering knuckle”.

@azmendozafamily 3 года назад

Quick question, would you recommend putting some blue thread locker on any of those components that are torque spec'd?

@Soldier1287 7 лет назад

Is the hub assembly the actual bearing? Or can the bearing itself be removed from the assembly? Cause I've seen separate bearings sold by themselves and alot cheaper than $100+ maybe even possible to change the bearing balls and add fresh grease? I could clean up the hub with my angle grinder with wire brush, maybe flap disc attachment as well, then finish off with high temp clear coat to stop rust from returning

@BigHappysPlace 6 лет назад

yes, while you can replace just the bearing it's self in the hub assembly. It requires a hydraulic press and more time to complete. Also the odds of the ABS sensor becoming damaged while removing the bearing is greatly increased, with how the sensor is integrated in to the assembly. It's more cost effective and less labor intensive to just replace the hub.

@spyfart4297 5 лет назад

3 words --> good job buddy

@charliehumber6383 4 года назад

Awesome video 👍 thanks

@mike.135i 8 лет назад

such good videos, maybe have like a minute @ the start showing all the tools needed for the job.

@mazdaminigarage6298 8 лет назад

My mom has a Jeep Commander. Now I know exactly how to replace the front wheel bearings if they go bad.

@milanmastracci 8 лет назад

Good luck buddy :)

@ironfistarrival 6 лет назад

Thank you so much , you can explain things so well , bravo ..

@milanmastracci 6 лет назад

Thanks Lennox :)

@michaeltrowbridge7174 5 лет назад

Awesome video

@theojo65 3 года назад

Thanks, great video

@milanmastracci 3 года назад

My pleasure!

@lanakoran8581 6 лет назад

thanks, great educational video

@stevenbryant4718 6 лет назад

If mine was that easy I wouldn't be searching here for a solution!

@milanmastracci 6 лет назад

Is your a press-in design?

@mikealkin9109 5 лет назад

Great job man finally some one did a great video about it 👍👍

@condor5635 5 лет назад

Great video! Should have bought the new dust shield and put it in or you will be replacing that bearing again a lot sooner than would be needed. Thanks for sharing and making!

@petestanley5811 5 лет назад

condor5635 A common misconception. It makes no difference. If anything it’s there to keep splashes off the rotor. Most of the time it traps more material than it deflects.

@adamdawood59 6 лет назад

Very useful video and I am fully understand.... thank you I have the same jeep patriot 2009 I want to replace the rear bumper can you make a video to how remote the bumper please 🙏