How to Replace a Post Light | Ask This Old House 

Ask This Old House master electrician Scott Caron helps a homeowner replace a lamppost light in his driveway. (See below for a shopping list, tools, and steps.)
SUBSCRIBE to This Old House: bit.ly/Subscrib...
Scott travels to South Dakota to help a homeowner replace a broken post light.
Scott installed the Hillsdale LED Post Mount and Hillsdale LED Wall Mount fixtures, which are manufactured by Minka-Lavery [www.minkagroup...].
Scott also installed an astronomic digital wall timer to automatically bring lighting on and off with the sun, which is available at home centers and electrical supply shops.
To set the post in concrete, Scott used a fast-setting concrete manufactured by Quikrete [www.quikrete.com/], which can be found at most home centers.
Expert assistance with this project was provided by Caron Electric [www.caronelectr...] and Wolfers Lighting [www.wolfers.com/].
Shopping List for How to Replace a Post Light:
Aluminum post
Lantern fixture
Quick-drying cement
Wire nuts
Tools for How to Replace a Post Light:
Screwdriver
Shovel
Pliers
Wire cutters
-Level
Steps for How to Replace a Post Light:
1. Turn off power to the area by shutting down the circuit breaker.
2. Disconnect the existing lantern fixture from the post.
3. Cut, using wire cutters, or disconnect the wiring that attaches the fixture to the post wiring.
4. Using a shovel, dig out around the post and remove the current post from the ground.
5. Position the new aluminum post in the old hole.
6. Fish the old wire through the aluminum post and bring it up to the top.
7. Use a level to ensure the aluminum post sits plumb.
8. Pour fast-setting cement into the hole and then soak it with water. Allow the concrete to set at least 30 minutes.
9. Connect the electrical wires from the new lantern fixture to the post wires using pliers and wire nuts.
10. Hand-tighten screws and nuts to shore up the lantern fixture on top of the aluminum post.
11. Replace the existing light switch with an astronomical timer that will automatically turn lighting on and off with changes in the seasons by undoing the wiring on the existing switch and replicating that wiring on the new switch.
About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers-and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
Looking for more step by step guidance on how to complete projects around the house? Join This Old House INSIDER to stream over 1,000 episodes commercial-free: bit.ly/2GPiYbH
Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet:
bit.ly/34RYEP5
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldH...
Twitter: bit.ly/ThisOldH...
bit.ly/AskTOHTw...
Pinterest: bit.ly/ThisOldH...
Instagram: bit.ly/ThisOldH...
How to Replace a Post Light | Ask This Old House
/ thisoldhouse