No video :(

How to Replace a Snowblower Auger Belt, Troy Bilt, Cub Cadet, MTD, Craftsman Auger Belt Replacement

Подписаться 25 тыс.

Просмотров 74 тыс.

50% 1

In this short video I show you how to change an auger belt on a Troy-Bilt or similar 2 stage snowblower or snow thrower.
Auger Belt: amzn.to/2M9Vscw
Amazon Affiliate Link
Fits: Troy-Bilt Squall Models 123R, 280EX, 179E, 208E, 210, 210E and 2100, Storm
Fits Troy-Bilt Storm Models 2410, 5024, 8526, 2620, 2690, 2840, 2890, 2625, Snow Tracker 2690 and 2690 XP
Fits Cub Cadet 1X 21, 1X 21LHP, 1X 221HP, , 1X 221LHP, 726TDE, 2X 524SWE, 2X 528SWE, 2X 524WE, 2X 528SW, 2X 528WE, 2X 526SW, 2X 526WE, 2X 530SWE, 2X 24, 2X 26, 2X 24HP, 2X 26HP, 2X 28HP, 3X 26

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 83

@5MinuteFixit 3 года назад

Hey everybody! Thank you for watching! If you found this video helpful please give it a THUMBS UP 👍 and consider subscribing! THANK YOU! I appreciate all the support! SUBSCRIBE HERE ▶︎ ru-vid.com/show-UC8BzgKWkH0AGzCOORKK7Vwg

@taze27 27 дней назад

Excellent! Thanks for showing how you replaced the auger belt. God bless.

@5MinuteFixit 5 дней назад

Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!

@roadstar5975 7 месяцев назад

Thanks for the how video. Great tips on how to replace the auger belt on my Troybilt snowblower. Sadly, breakdowns always happen when you need to the equipment to be working. I don't have a garage, so I had to replace in my driveway. Temp was 19 degrees. The hardest part was keeping my hands warm for this 5-minute repair. Thumbs up and I plan to keep it that way by not putting my hand in the snowblower.

@tombiggs4687 7 месяцев назад

Mine just broke. It was working fine until I hit a large rock. I don't have a garage either. But I live on a hill and my basement has a door at the back of the house. I was in luck, the snowblower fit through that door!

@Jferrante0920 6 месяцев назад

Thanks so much for this quick and to the point video. The auger belt on my snowblower went during the last snowstorm and I replaced it yesterday right before another storm today in PA. I was worried this was going to be a real challenge but this video make it really easy. Thanks so much!

@vickyiannucci6630 2 года назад

Thank you so much! My hubby was supposed to replace the auger belt on a Troy-Bilt but ran out of time and we got some snow so with the help of your video I went at myself and my beautiful Sampson is now blowing snow just like he should be I will say getting that old belt off was not near as easy on mine period it was super tight and I don't have the greatest hands but I got it done. Thank you again for all your help

@5MinuteFixit 2 года назад

That’s great! I’m glad you were able to get it done yourself and now your machine is in working condition! Thank you for watching! Please consider giving the video a thumbs up if you haven’t already and also be sure to check out my other snowblower maintenance videos if you are interested! Thank you!

@OsrsTest-uq1ut 8 месяцев назад

Thanks I never worked on snowblowers and just by having a quick look at the auger belt I thought I had to remove the whole bucket and pulleys but It slides in between the two 😂 great video, thanks!

@5MinuteFixit 8 месяцев назад

Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank You!

@unclecooter9468 2 года назад

Thank you ! Finally got my blower working without a 300 dollar bill .

@leoking853 Год назад

Thanks, i just used this video to change mine and saved me $200+. Thanks

@5MinuteFixit Год назад

Thant great! I’m glad the video was helpful and you were able to save yourself some money! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!

@longlifeprinters9 Год назад

Excellent !! I was able to get right at the belt & replace it. Had to pry the 2 pulleys apart with a screwdriver & twist the new belt just a bit to get it between the pulleys. I ended up removing the long spring on the red painted belt keeper & then could move it out of the way. Remember to hook the spring back on.

@5MinuteFixit Год назад

Thank you for the tip! I'm glad it was helpful! Thank you for watching and please consider giving the video a thumbs up if you haven't already! Thank you!

@asegarra5279 Год назад

Great job. This is something I can easily do. 👍🏼👍🏼 I just purchased this model used for $100 and it started right up but the auger and isn’t working so I took the cover off and low and behold the belt is broken.

@jorheybhai Год назад

Thanks a lot I follow your instructions and the job is done in 30 minutes

@5MinuteFixit Год назад

Thank you for watching, I'm glad it was helpful! Please consider giving the video a thumbs up if you haven't already! Thank you!

@foxhound9781 Год назад

Very helpful video, thank you very much!

@5MinuteFixit Год назад

I'm glad it was helpful! Thank you for watching and please consider giving the video a thumbs up if you haven't already! Thank you!

@PurpleSideBlack Год назад

Thank you. This helped me replace the belt. Very easy once you've done it once.

@5MinuteFixit Год назад

That’s great, I’m glad it was helpful! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!

@PurpleSideBlack Год назад

@@5MinuteFixit I have another issue maybe you could do a How-to video for. My Troybilt Snowblower just like this one has 6 FWD and 2 REV speeds. It won't reverse in speed 1 and speed 2 barely moves. How so I fix that? It's been like this since new or pretty close to it. Blower is 10yrs old now.

@5MinuteFixit Год назад

@@PurpleSideBlack this almost certainly has to do with the cable adjustment...I noticed that my snowblower has trouble in reverse as well. This is a good idea for a video in the future...thank you for that!

@kungfulender8733 3 года назад

That you so much. You saved me time and money. I found it easier to put the auger belt over then small pulley first and the big one at the bottom.

@5MinuteFixit 3 года назад

That’s great, I’m glad you found the video helpful! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!

@jasonrolston1316 2 года назад

Moomokokoooookooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooili

@johnbenton9035 7 месяцев назад

Thanks very much for this video. It helped me a lot.

@5MinuteFixit 7 месяцев назад

Thank you for watching, I'm glad it was helpful! Please consider giving the video a thumbs up if you haven't already and also check out my other snowblower maintenance videos if you are interested! Thank you!

@leobachand8408 2 года назад

Excellent job! Made it real easy to follow and fix my blower!! Thanks!!

@5MinuteFixit 2 года назад

That’s great I’m glad you were able to fix it with the help of the video! Thank you for watching and please consider giving it a thumbs up if you haven’t already! Thank you!

@stany9266 Год назад

Thanks, this was a great video and very helpful! One issue I had after replacing the belt was when releasing the auger lever it rubs against the plastic cover a bit. Could this mean it needs a cable adjustment to tighten it up a bit?

@blainemcdonald6972 Год назад

Good idea to clean that belly pan while ur at it, good video

@5MinuteFixit Год назад

Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!

@glock21guy Год назад

Thank you. I had it all apart fine but couldn't get it between the 2 pulleys - never dawned on me to engage the drive :D

@5MinuteFixit Год назад

Thank you for watching, I’m glad you were able to figure it out and get it replaced!

@jameswood4806 3 года назад

Thanks so much for this video. I just replaced my auger belt and probably saved myself quite a bit of money. Upon trying to get the belt off, I noticed something in the housing. Turns out an acorn was stuck in there. Two actually so I'm wondering if a mouse was attempting to make a house.

@5MinuteFixit 3 года назад

Thanks for watching! I’m glad you found it helpful and were able to save some money! I just uploaded a drive belt replacement video today if you’d like to check that one out as well: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-su5wcc2S4UA.html

@jameswood4806 3 года назад

@@5MinuteFixit Hopefully I’ll never have to watch it, but now I know where to go if needed. Thanks.

@blainemcdonald6972 Год назад

Mice don’t eat acorns but squirrels sure do

@TheMetalmachine467 Год назад

Thanks for the information 👍

@eddiedav6162 Год назад

Great job thank-you I was using my snowblower today smoke came from the cover you open to see belt and I shut it down I hope it is belt issue

@5MinuteFixit Год назад

Thank you for watching, hopefully it's just a belt issue and you can get it resolved quickly!

@jasonmyjak5117 3 года назад

Great video! I just changed my auger and drive belt same snowblower, now auger belt so loose and friction wheel feels loose everything tight again

@5MinuteFixit 3 года назад

Thanks for watching! Glad you found it helpful!

@richardjangro9315 Год назад

Thanks just saved me a 100$ something dollars on doing it my self

@5MinuteFixit Год назад

Thank you for watching, I’m glad it saved you some money! Please consider giving the video a thumbs up if you haven’t already! Thank you!

@jedidiah5131 2 года назад

I can smell rubber now and then...my auger doesn't have the power to throw deep snow now.. I tightened auger cable, it worked for a bit and now it will only throw very light snow if it gets deep it stops....I tightened the auger cable again and same results...I would imagine I need a new belt?... I just watched another video and I may have to adjust the idler pulley also.......thanks for the video.

@nickh5049 9 месяцев назад

I'm having the same problem, did you ever figure this out?

@jedidiah5131 9 месяцев назад

@@nickh5049 The belt was worn badly, I can only assume it was never adjusted properly from the factory as its only on its 2nd year with hardly any use....

@whiteboy12911 2 года назад

thanks alot i got to do the same thing this video very very help full thank u have a great day besafe as always

@5MinuteFixit 2 года назад

Thanks for watching!

@DIYVariety Год назад

Thanks bud cheers. Oh i hit the sub button looking forward to your content.

@5MinuteFixit Год назад

Thank you for watching and for subbing to the channel I truly appreciate it!

@CHICO976 2 года назад

The only way I could remove the auger belt was to remove the whole front end...this past time, I found another way to provide more clearance to that bolt that stops it...I found that if I removed the bolts from the rubber drive wheel above the friction wheel and moved it to one side I could get more clearance from the bolt on the big auger pulley..I sure is easier than removing the whole front of the blower...what do you think of this way?

@5MinuteFixit 2 года назад

I think as long as you have enough clearance to remove and then reinstall it that way I don’t see an issue at all. I guess worst case is if you ran into trouble you could just spit the unit and finish it that way! Thank you for watching, hopefully this helps!

@cykablyat1466 Год назад

thanks

@5MinuteFixit Год назад

Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!

@seung-hojoo7705 Год назад

How long do the belt last? How often should I replace them as preventive maintenance? Thanks

@5MinuteFixit Год назад

The belt should last a while, my machine was close to 8 years old when I replaced the belt.

@nickh5049 9 месяцев назад

So I replaced both belts proactively (5 years old), and now it makes a noise like the belts are rubbing on something. I think the guide on the auger belt is making contact with the belt at idle when it shouldn't. Any advice?

@kck3888 7 месяцев назад

Same issue here

@daviddecesare9832 2 года назад

The video was very helpful! The original belt on my Storm 2840 was MTD 754-04195 and it seems like the MTD 954-04050A belt is too small (and the belt in your link doesn't have the teeth on the side of the belt). Do you know if they changed the belt specs at all?

@wtriba 2 года назад

There are two possible engines on these models, Large and Standard. The 04195 (37") is for larger engines, while the 04050 (35") is for standard engines. Troy Built's website lists both for my Storm 2410. Probably best to remove the old one first and measure before replacing.

@gadasavideos8564 Год назад

@wtriba for some reason my aftermarket supplier lists the 37 as 36 3/4. Interesting though is is shows cogged as was the one in this video. My friend's broken belt was not cogged interesting though is mtdparts site is picturing it as not cogged but also as 04195a

@nickshropshire1490 Год назад

Is this the same process for Murray as well?

@symonmigneault9760 2 года назад

i have a mtd gold 30 inches i think but their is a bot on the wheel and i cant but the belt

@stacylenihan206 Год назад

I just ordered an auger belt and wheel drive belt…the auger belt on the replacement belt is not notched for auger as original is and the drive belt is notched where the original was not. So both opposite of what originals are. Does that sound right? I have a Troy bilt 2840 storm. Got from Amazon. Thank you.

@5MinuteFixit Год назад

When you take off the original belts I would match up the length and width to make sure they are correct. They may very well be the correct ones but I would recommend comparing them first.

@charlieseymour5489 2 года назад

Do you have the part number for the engine pully

@jamesak257 7 месяцев назад

Will this belt fix the Troy bilt storm 2660 too

@5MinuteFixit 7 месяцев назад

Yes it will! Thank you for watching!

@MrCudd 2 года назад

What is the auger belt retention bolt for ?

@5MinuteFixit 2 года назад

As far as I understand it helps keep the belt from jumping off the pulley. Hopefully this helps! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!