How to Replace Belts on a Snowblower

Подписаться 100 тыс.

Просмотров 248 тыс.

50% 1

Step by Step!
Today we'll be replacing both the drive and auger belt on a Craftsman 944.520630 snowblower.
Auger Belt: 408007 or 532408007 or STENS 258-038 (5/8"x38")
Drive Belt: 419744 or 532419744 (1/2"x34.5")
We decided to use a Kevlar belt for the auger, as it will last longer than a standard belt.
Follow the steps in this video, and your machine will be back up and running again!
_______________________________________________
If you enjoyed the video, hit LIKE & SUBSCRIBE!
New videos every week!
SOCIAL MEDIA:
Instagram: ELMN80R
/ eliminatorperformance
/ elmn80r
/ eliminatorperformance
DONATE:
paypal.me/ELMN80R
Bitcoin: 1NYgPvcvBWuhGRewsLE4Scy1cbzwndh5hZ
2ND CHANNEL:
EP Vlogs: / @eliminatorperformance...
GEAR:
Camera: amzn.to/2HVkW9o
Tripod: amzn.to/2HGWt4w
Microphone: amzn.to/2J7k9DA
Cheap Mic: amzn.to/2xCBn6z
Headphones: amzn.to/2JeHUG9
Editing Software: amzn.to/2JD7OTx
Photoshop: amzn.to/2HBY6Ez
MUSIC:
Intro/Outro Music: Burnt - Jingle Punks

Хобби

Опубликовано:

19 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 276

@deanmcleodphotography 4 месяца назад

Just WOW. Why can't more people make videos like yours? This was EXCELLENT. Clear. Concise. You know the names of the parts. Well lit. Easy to understand. Good audio. I learned something. SUBSCRIBED.

@deanmcleodphotography 4 месяца назад

Just replaced both belts and a shear bolt on one axle in record time, thanks to your great video. Thanks again!

@Dandelion_Stitches 5 месяцев назад

Thank you very, very much for this video. I knew I had a problem with the impeller's belt in mine but had no idea how to approach it; your video both helped me identify exactly what the problem was (slipped belt in this case, one of the belt guards had come loose in the front half), but also the start to finish of opening it up, replacing the belt and fixing everything up. Definitely saved a lot of hassle and probably some of my sanity. Thank you again!

@danreid9856 2 года назад

The best of all snowblower repairs beats out all the wanna-be pros. Audio-video=Exccelent. No shakes on video=Excellent. Should have left an address you'd get lots of customers. guaranteed.

@TestEric Год назад

16:22 "This may be the most difficult part if doing it by yourself. - Amen. Thank you for the amazingly clear and concise instructions. I found your video when I came in defeated unable to reattach the two sides of the snow blower after the auger belt change, I searched a ton of videos that skipped past that part. Within 15 minutes of watching your video my blower is back together. Thank you!

@outlaw686 7 месяцев назад

I have the same snowblower. I wish I had watched your video before I changed mine. This is much easier than what I did 🤣: I removed the auger idler arm and the drive plate just rocks forward. Then when I put the idler arm back in, I had to figure out which hole to put the pin from the control rod back in, I found it was all rusty and treated it with wd40 to remove the rust and then fluid film to protect it. Wiped it down after with a dry paper towel so nothing would drip, and made sure no lubricant would get near the drive belt path. Still looks like it's only a couple years old and the label says 2005. Hope to keep it running as long as possible. Treating that machine well is better than paying for a new one and I have fun maintaining it.

@milohajek 2 года назад

I've got it down to 11 Minutes to take everything apart, remove and replace both belts and reassemble.

@glenntonge7144 2 года назад

Very good video, thank you so much. Had my first major snowfall after replacing both belts on my 22year old d Craftsman blower and adjusting the tensioner spring. Man, it is like new in fact possibly better than new. I have never seen it throw snow this far. Thank you!

@Vankaner 4 месяца назад

Nice video with clear concise instructions. Thanks.

@lewishensleyjr9887 3 года назад

I replaced the belts on a snapper and a mury snow blower and I split the machine completely . Didn't know it could be done as you did it. Thanks from Virginia for the lesson.

How to Replace Belts on a Snowblower

Опубликовано:

Поделиться:

Ссылка:

Скачать:

Добавить в: