Thanks! Exactly what I needed to see. The tip of unplugging the lightbulb before you take it out of the socket was money! I was able to do it one handed. 👍🏻 👍🏻
Thanks for showing how to unclip the bulb from the wire. All other youtubes showed the grey connector where you pinch the two ears. You showed what I have, a black connector with a single detente in the middle. I couldn't have figured it out since I could not see the connector and had to work by touch only. Thanks!
Thank you so much! Guy wanted to charge us $160 to put the bulb in at the shop. Saying he had to take the whole bumper off. Guy was all under the hood!!! I told my husband that's BS! Showed him your video he did it in 5 minutes!
Worked 100%. First thing I did was pop the hood and then wtf? This video is spot on for my 2017 Traverse LT AWD. I played the video while performing the steps. Its tight but can be done. Turn wheel to opposite side you are working. I used a small 12V impact drill. It fit no problem. The harness is toughest part to be honest
Both of my headlights went out at the same time! Got pulled over last night for driving without headlights. How in the world do they both go out at the same time
Honestly this isn't the right way to do it if you turn your steering wheel towards the inside whichever side you're doing and you take the two-star bolts out of the cover pull the cover open a little bit and you look up and you'll see a round cap you open the cap turn the light bulb pull it out disconnect put new one on and reverse process
